Answer:
2 mL.
Explanation:
From the question given above, the following data were obtained:
Volume of water = 8 mL
Volume of water + solid = 10 mL
Volume of solid =?
The volume of the solid can be obtained as follow:
Volume of solid = (Volume of water + solid) – (Volume of water)
Volume of solid = 10 – 8
Volume of solid = 2 mL
Therefore, the volume of the solid is 2 mL
HELP PLZ
Calculate the percent composition by mass of iron in Fe(NO3)3
BRAINIEST AND POINTS
Which option below accurately describes the relationship between wavelength and energy level?
A. Longer wavelength means higher energy level.
B. Shorter wavelength means higher energy level.
Answer:
shorter waves equal more power
Explanation:
"higher frequency and shorter wavelengths are one in the same thing. the higher frequency - higher energy results from Planck's realization of the quantization of light and resulting E=hf equation"
What type of intermolecular forces are due to
the attraction between temporary dipoles
and their induced temporary dipoles?
Select one:
a. London dispersion
b. Metallic bond
C. Covalent bond
d. Hydrogen bond
e. lonic bond
Answer:
A. London dispersion
Explanation:
London dispersion force is a temporary attractive force that results when the electrons in two adjacent atoms occupy positions that make the atoms form temporary dipoles.
The intermolecular forces are due to the attraction between temporary dipoles, and their induced temporary dipoles are the type of London dispersion force. Therefore, option A is correct.
What is london dispersion force ?When the electrons in two nearby atoms occupy positions that cause the atoms to temporarily form dipoles, the consequence is the London dispersion force, a transient attractive force. The term "induced dipole-induced dipole attraction" is frequently used to describe this effect.
The electron density of a molecule is redistributed towards another molecule because the electrons in nearby molecules "flee" when they repel one another. This is typically explained as the instantaneous production of attracted dipoles.
The material's atomic or molecular weight affects the London dispersion forces. More electrons and stronger London forces are present in heavier atoms or molecules. They are therefore more difficult to melt or boil.
Thus, option A is correct.
To learn more about london dispersion force, follow the link;
https://brainly.com/question/20514601
#SPJ2
When Rutherford performed his experiment, only 1 in 20,000 alpha particles bounced straight back or were
deflected greatly. The rest went straight through the gold foil.
a What does this indicate about the probability of actually hitting anything?
Answer:
when rutherford performed his experiment, only 1 in 20,000 alpha particles bounced straight back or were deflected greatly. the rest went straight through the gold foil. e) based on this evidence, what is in atom's center? positively charged particles.
Explanation:
How many moles are in 3.01 x 10^23 atoms of zinc?
Answer:
0.5 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{3.01 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{3.01}{6.02} \\ = 0.5[/tex]
We have the final answer as
0.5 molesHope this helps you
pcl3 compound stable but don't follows octet rule what is the reason behind?
PLEASE HELP ME!!!!!!!
Answer:
The heat capacity of the metal underneath the gold is 0.431 J/g°C
Explanation:
Using the formula as outlined in the image:
Q = m × c × ∆T
Where;
Q = amount of heat energy (J)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
According to the information in this question;
Q = 503.9J
m = 23.02g
c = ?
∆T = 74°C - 23.2°C = 50.8°C
Using Q = m × c × ∆T
c = Q ÷ m∆T
c = 503.9 ÷ (23.02 × 50.8)
c = 503.9 ÷ 1169.42
c = 0.431 J/g°C
From the above heat capacity of the metal underneath the gold, it is obvious that the metal is not pure gold (c = 0.129J/g°C)
The area of a telescope lens is 6507 x 10^3 mm^2. What is the area in square feet, enter your answer in scientific notation. If it takes a technician 51.6 s to polish 1.68 x 10^2 mm^2 how long does it take her to polish the entire lens ?
Answer: the area of the telescope lens is \textit{0,08507 ft}
Explanation: Happy I could help!
What is the main function of a nucleic acid?
A. It allows polysaccharides to form.
OB. It stores lipids inside the proteins.
C. It contains instructions for making proteins.
OD. It is a catalyst in chemical reactions.
The main function of nucleic acid is It stores lipids inside the proteins.
Nucleic acidsNucleic acids are large biomolecules that play essential roles in all cells and viruses. A major function of nucleic acids involves the storage and expression of genomic information. Deoxyribonucleic acid, or DNA, encodes the information cells need to make proteins. A related type of nucleic acid, called ribonucleic acid (RNA), comes in different molecular forms that play multiple cellular roles, including protein synthesis.
Nucleic acids are made of nitrogen-containing bases, phosphate groups, and sugar molecules. Each type of nucleic acid has a distinctive structure and plays a different role in our cells. Researchers who first explored molecules inside the nucleus of cells found a peculiar compound that was not a protein or a lipid or a carbohydrate. It was new. The discovery of this molecule — nuclein, which upon further understanding became nucleic acid — set in motion the eventual discovery of DNA.
Learn more about Nucleic acids
https://brainly.com/question/2488520
#SPJ2
how do the hydrosphere and atmosphere interact? give an example
Answer:
Evaporation
Explanation:
Water in the ocean, rivers, lakes, etc. is part of the hydrosphere, and when that water evaporates it enters the atmosphere
using a map give the coordinates of the capital of the neighboring countries of the philippines e.g tokyo japan
Answer:
The correct answer is -
1. Malaysia - Kuala Lumpur 3.1390° N, 101.6869° E
2. Indonesia - Jakarta - 6.2088° S, 106.8456° E
3. Vietnam - Hanoi - 21.0278° N, 105.8342° E
4. Taiwan - Taipei -25.0330° N, 121.5654° E
5. China - Beijing - 39.9042° N, 116.4074° E
6. Palau - Ngerulmud - 7.5004° N, 134.6243° E
7. Japan - Tokyo - 35.6762° N, 139.6503° E
Explanation:
The Philippines does not share its land borders with any country, however, the Philippines claims that they share their boundary with Malaysia. Other than land borders they also share maritime borders with Palau, Taiwan, Vietnam, China, Indonesia, and Japan.
All these neighboring countries have capitals that are as follows with their coordinates on the atlas-
1. Malaysia - Kuala Lumpur 3.1390° N, 101.6869° E
2. Indonesia - Jakarta - 6.2088° S, 106.8456° E
3. Vietnam - Hanoi - 21.0278° N, 105.8342° E
4. Taiwan - Taipei -25.0330° N, 121.5654° E
5. China - Beijing - 39.9042° N, 116.4074° E
6. Palau - Ngerulmud - 7.5004° N, 134.6243° E
7. Japan - Tokyo - 35.6762° N, 139.6503° E
PLS HELP
When 50.0 g of copper was reacted with 300.0 g of silver nitrate solution, 149 g of silver was obtained. What is the percent yield of silver obtained?
Answer:
Percent yield of silver obtained = 78.18% (Approx.)
Explanation:
Given:
Amount of copper = 50 gram
Amount of silver nitrate = 300 gram
Amount of silver = 149 gram
Find:
Percent yield of silver obtained
Computation:
Percentage of Silver in silver nitrate = 108[100/(108+14+48)]
Percentage of Silver in silver nitrate = 108/[100/170]
Percentage of Silver in silver nitrate = 63.53% (Approx.)
Amount of Silver produced = [63.53%][300]
Amount of Silver produced = 190.59 gram
Percent yield of silver obtained = [Amount of silver / Amount of silver produced]100
Percent yield of silver obtained = [149/190.59]100
Percent yield of silver obtained = 78.18% (Approx.)
a. how many grams of H2SO4 are in 3.5 liters of 2.0 M H2SO4
b. how many liters of 2.0 M H2SO4 would be made from 3 liters of water. (Hint water has a density of 1g per mL.)
Answer:
a. 686g of H2SO4 are present.
b. 3.321L would be made
Explanation:
a. Molarity, M, is an unit of concentration defined as the ratio between moles of solute (In this case H2SO4) and liters of solution. The moles of H2SO4 in 3.5L of 2.0M H2SO4 are:
3.5L * (2.0mol H2SO4 / L) = 7.0 moles H2SO4
The mass is obtained using molar mass of H2SO4 -98g/mol-:
7.0 moles H2SO4 * (98g / mol) = 686g of H2SO4 are present
b. The density of H2SO4 is 1.83g/mL. The volume of 2.0M H2SO4 per liter of solution is:
2.0mol H2SO4 / L * (98g / mol) * (1mL / 1.83g) = 107mL of H2SO4 are present per liter of solution. In 3L there are:
3L (107mL / L) = 321mL = 0.321L of H2SO4 must be added to 3L of water to produce 2.0M H2SO4. The total volume is:
3L + 0.321L = 3.321L would be made
Analyses of enzymes found in the blood are used as indicators that tissue damage (heart, liver, muscle) has occurred and resulted in the leakage of cellular enzymes into the bloodstream.
a. True
b. False
Answer:
True.
Explanation:
Yes, analyses of enzymes found in the blood are used as indicators of tissue damage in the heart, liver, muscle etc has occurred. This leakage of enzymes into the bloodstream tells us whether the tissue is damaged or not. Lactate dehydrogenase is a type of enzyme which is used as indicator which is responsible for the interconverts lactate and pyruvate. The concentration of this enzyme in the blood tells us about tissue damage.
Answer:
a. True
Explanation:
The co enzyme used for this reaction is NADH+, here H+ acts as co substrate.
This is required to find the tissue damage that has occurred in our body which resulted in leakage of cellular enzymes into the bloodstream.
This coenzyme is used for conversion of lactose dehydrogenase.
You need to prepare 1 L of the citric acid/citrate buffer. You have chosen to use Method 1 (see lab presentation). Calculate the pH of a solution prepared by mixing 300 mL of 0.45 M citric acid acid and 100 mL of 0.65 M NaOH plus water to a final volume of one liter. The Ka of citric acid is 7.24 x 10-4.
Answer:
3.11 is the pH of the buffer
Explanation:
The pH of a buffer is obtained using H-H equation:
pH = pKa + log [Conjugate base] / [Weak acid]
Where pH is the pH of the buffer, pKa = -log Ka = 3.14 for the citric buffer and [] could be taken as the moles of each species.
The citric acid,HX (Weak acid), reacts with NaOH to produce sodium citrate, NaX (weak base) and water:
HX + NaOH → H2O + NaX
That means the moles of NaOH added = Moles of sodium citrate produced
And the resulitng moles of HX = Initial moles - Moles NaOH added
Moles HX and NaX:
Moles NaOH = 0.100L * (0.65mol / L) = 0.065 moles NaOH = Moles NaX
Moles HX = 0.300L * (0.45mol / L) = 0.135 moles HX - 0.065 moles NaOH = 0.070 moles HX
Replacing in H-H equation:
pH = 3.14 + log [0.065mol] / [0.070mol]
pH = 3.11 is the pH of the buffer
Brainiest and 10 Points
What is the name of the rays the human eye can see?
A. Radio Rays
B. Water Waves
C. Visible Light Rays
D. X Rays
I believe the answer for this is:
C. Visible Light Rays
I hope this helps! :D
Answer:
C, visible light rays :)
Explanation:
Hope i could help
80. When water forms ice, hydrogen bonds around a water molecules are at ... apart.
1.
30 °C
2. 45 °C
3.
90 °C
4.
180 °C
5. 35 °C
6. I do not know.
N
Answer:
6
Explanation:i dont know
A metal cube with a specific heat capacity of .55
J/gºC, a mass of 55grams and a temperature of 85°C
is immersed in water at 20°C. The metal and water
then reach a equilibrium temperature of 23°C. What is
the mass of the water?
Answer:
148.85 g or 0.14885 kg
Explanation:
Applying,
Heat lost by the metal cube = heat gained by the water.
c'm'(t₁-t₃) = cm(t₃-t₂).................. Equation 1
Where c' = specific heat capacity of the metal, m' = mass of the metal, c = specific heat capacity of water, m = mass of water, t₁ = Initial temperature of the metal, t₂ = Initial temperature of water, t₃ = equilibrium temperature.
make m the subject of the equation
m = c'm'(t₁-t₃)/c(t₃-t₂).............. Equation 2
From the questions,
Given: c' = 0.55 J/g.°C, m' = 55 g, t₁ = 85°C, t₂ = 20°C, t₃ = 23°C
Constant: c = 4.2 J/g.°C
Substitute these values into equation 2
m = 0.55×55×(85-23)/(4.2×[23-20])
m = 1875.5/12.6
m = 148.85 g.
m = 0.14885 kg
which element is found in period 6 group 14
Answer:
Lead
that can be found in the periodic table of elements
Explanation:
The volume of a gas is decreased from 100 liters at 173.0°C to 50 liters at a constant pressure. After the decrease in volume, what is the new temperature of the gas?
Answer:
223.08 K
Explanation:
First we convert 173.0 °C to K:
173.0 °C + 273.16 = 446.16 KWith the absolute temperature we can use Charles' law to solve this problem:
T₁V₂=T₂V₁Where in this case:
T₁ = 446.16 KV₂ = 50 LT₂ = ?V₁ = 100 LWe input the data:
446.16 K * 50 L = T₂ * 100 LAnd solve for T₂:
T₂ = 223.08 KWrite a conclusion statement that addresses the following questions: • Explain what the color change indicated about the changes in the concentrations of Co(H2O)62+ and CoCl42– in each trial. • Do your data support or fail to support your hypothesis (include examples)? • How do you think the investigation can be explored further?
When the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.
What is equilibrium?The term equilibrium in a chemical reaction connotes that the forward and the revers reactions proceed at the same rate. Let us note that Co(H2O)6^2+ is pink in color while CoCl4^2– is blue in color.
As such, when the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.
Learn more anout equilibrium: https://brainly.com/question/365923
determines the type of element an atom is.
The number of neutrons
The number of atoms
The number of electrons
The number of protons
Answer:
for number of neutrons it is mass number take away the atomic number
number of electron is the same as number of proton unless there is a charge like +2 it will have 2 less electron than the proton (atomic number ) number.
number of proton is the atomic number
Explanation:
hope it make sense:)
Answer:
D. The number or protons
Explanation:
It doesn't matter how many electrons or neutrons an atom has; the element always is defined by its number of protons.
Predict the effect of an eightfold pressure increase on the equilibriunm composition of the reaction 3 Nalg) + H21g) =2 NaHlg)
According to Le cha telier's principle when we increase the pressure of a equilibrium reaction the reaction shift to the side where few moles of gas present.
Your reaction (Notice - I guess the reaction you written is wrong, but still I'm solving with your given prediction)
3NaI (g) + H2 (g) = 2NaHI (g)
Where access of sodium iodide is reacting with Hydrogen gas to form NaHI molecule.
Number of moles of gas on reaction side - 3+2 = 5 moles
Number of moles of gas on product side - 2 moles
Conclusion- the reaction will shift to the right of the reaction
According to Le cha telier's principle when we increase the pressure of a equilibrium reaction the reaction shift to the side where few moles of gas present.
Your reaction (Notice - I guess the reaction you written is wrong, but still I'm solving with your given prediction)
3NaI (g) + H2 (g) = 2NaHI (g)
Where access of sodium iodide is reacting with Hydrogen gas to form NaHI molecule.
Number of moles of gas on reaction side - 3+2 = 5 moles
Number of moles of gas on product side - 2 moles
Conclusion- the reaction will shift to the right of the reaction
Map
Formulate your hypothesis.
List down the materials.
• Write the methods.
Answer:
How to Formulate an Effective Research Hypothesis
State the problem that you are trying to solve. Make sure that the hypothesis clearly defines the topic and the focus of the experiment.
Try to write the hypothesis as an if-then statement. ...
Define the variables.
Explanation:
Now we need to find the amount of NF3 that can be formed by the complete reactions of each of the reactants. If all of the N2 was used up in the reaction, how many moles of NF3 would be produced
The question is incomplete, the complete question is:
Nitrogen and fluorine react to form nitrogen fluoride according to the chemical equation:
[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]
A sample contains 19.3 g of [tex]N_2[/tex] is reacted with 19.3 g of [tex]F_2[/tex]. Now we need to find the amount of [tex]NF_3[/tex] that can be formed by the complete reactions of each of the reactants.
If all of the [tex]N_2[/tex] was used up in the reaction, how many moles of [tex]NF_3[/tex] would be produced?
Answer: 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.
Excess reagent is defined as the reagent which is left behind after the completion of the reaction.
In the given chemical reaction, [tex]N_2[/tex] is considered as a limiting reagent because it limits the formation of the product and it was completely consumed in the reaction.
We are given:
Mass of [tex]N_2[/tex] = 19.3 g
Molar mass of [tex]N_2[/tex] = 28.02 g/mol
Putting values in equation 1:
[tex]\text{Moles of }N_2=\frac{19.3g}{28.02g/mol}=0.689mol[/tex]
For the given chemical reaction:
[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]
By the stoichiometry of the reaction:
1 mole of [tex]N_2[/tex] produces 2 moles of [tex]NF_3[/tex]
So, 0.689 moles of [tex]N_2[/tex] will produce = [tex]\frac{2}{1}\times 0.689=1.378mol[/tex] of [tex]NF_3[/tex]
Hence, 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.
The student kicks the soccer ball three times and I shouldn’t record the distance the amount of time the ball travels and the average speed in the table shown below soccer ball girl how many seconds did it take for the ball to travel 30 m during kick three
Answer: D it’s is 2.0 s
i think..
Explanation:
If the molecule has n-C2 axes perpendicular to its Cn axis, choose True. Otherwise, choose False. Be sure to build a model or draw the structure before selecting your answer. If needed, search for the molecular structure online or in a textbook.XeF4[PdCl4]2−naphthalenefuran, C4H4O
Answer:
XeF4 True
[PdCl4]2− True
naphthalene True
Furan False
C4H4O False
Explanation:
From the given information:
Only XeF4; [PdCl4]2−; naphthalene are true. This is because their molecules contain -nC₂ axis which is perpendicular to the Cn axis. The image attached below shows the structural formula of each compound, there below, we can see that Furan only possesses one C₂ axis but not -nC₂ ⊥ C₂.
True or False: "Endothermic Reactions absorbs energy in the form of heat."
Answer:
true
Explanation:
Endo means inside
but exo means outside
an Endo thermic reaction sounds like it wouldn't be the one to give off heat, so it might be storing heat.
A radioactive material, with half-life of six months, has 100 thousand unstable nuclei.
(a) Find the number of unstable nuclei present after three months.
(b) What will be its activity at this time (after three months)?
Answer:
See Explanation
Explanation:
Given that;
N/No = (1/2)^t/t1/2
Where;
No = amount of radioactive isotope originally present
N = A mount of radioactive isotope present at time t
t = time taken
t1/2 = half life
N/1000=(1/2)^3/6
N/1000=(1/2)^0.5
N = (1/2)^0.5 * 1000
N= 707 unstable nuclei
Since the value of the initial activity of the radioactive material was not given, the activity of the radioactive material after three months is given by;
Decay constant = 0.693/t1/2 = 0.693/6 months = 0.1155 month^-1
Hence;
A=Aoe^-kt
Where;
A = Activity after a time t
Ao = initial activity
k = decay constant
t = time taken
A = Aoe^-3 *0.1155
A=Aoe^-0.3465
The maximum amount of water vapor that air can hold is ? , while the actual amount of water vapor in the air is ? and is measured as a ?.
Answer:
The maximum amount of water vapor the air can hold at a given temperature is known as the Saturation Point, it is also identified as 100% relative humidity.