If there is 10 VRMs across the resistor and 10 VrMs across the capacitor in a series RC circuit, then the source voltage equals A) 10 VrMS 23) B) 28.3 VRMS C) 20 VRMS D) 14.1 VRMS

It is usually not okay to change the value of the EBP register within the procedure when passing parameters to a procedure on the stack.

A procedure, also known as a subroutine, is a series of instructions that are implemented in a program to perform a specific task. The procedure is executed only when it is called or invoked by the main program or other subroutines in the program.

The calling function provides data to the called function by transferring it through the function parameters or arguments.It is generally considered a good programming practice to utilize a function's parameters to pass data to the function.

The stack is frequently used to transfer parameters and return data between a calling function and a called function in a program.A stack is a Last-In-First-Out (LIFO) data structure that is used to store and retrieve data in a program.

Learn more about stack on:

brainly.com/question/15242038

#SPJ4

Although the Accommodating or Smoothing approach may make a conflict situation livable, it does not resolve the issue.

What is an accommodating approach?

An accommodating approach is a method of dealing with conflict by neglecting one's own needs and yielding to the desires of others. The goal is to please the other person by meeting their needs while ignoring one's own. The accommodating approach, though useful, can be seen as disingenuous because the primary aim is to please others rather than resolving the issue.

What is a smoothing approach?

A smoothing approach is an approach to problem-solving that emphasises the need for harmony and peace in interpersonal relationships. This approach involves avoiding confrontation and ignoring minor conflicts. The smoothing approach, on the other hand, can make it easier for everyone to get along, but it does not deal with the underlying issues and can exacerbate conflicts in the long run.

Although the Accommodating or Smoothing approach may make a conflict situation livable, it does not resolve the issue. An accommodating approach is a method of dealing with conflict by neglecting one's own needs and yielding to the desires of others. The goal is to please the other person by meeting their needs while ignoring one's own. The accommodating approach, though useful, can be seen as disingenuous because the primary aim is to please others rather than resolving the issue.A smoothing approach is an approach to problem-solving that emphasises the need for harmony and peace in interpersonal relationships. This approach involves avoiding confrontation and ignoring minor conflicts. The smoothing approach, on the other hand, can make it easier for everyone to get along, but it does not deal with the underlying issues and can exacerbate conflicts in the long run.

Learn more about accommodating approach:

https://brainly.com/question/29554701?referrer=searchResults

#SPJ11

The correct option is d. Algorithm is selection sort.

The sorting technique found the largest number first. This implies that the algorithm used to sort the array must be a sorting algorithm that makes use of selection. Here, selection sort is an algorithm that can sort an array by selecting the smallest element of the unsorted list and placing it at the beginning of the list.The elements of the array are in the order: 24578136. After the first iteration, the largest number is already in place, and the remaining numbers need to be sorted. This implies that the largest number found in the first iteration is 8. After the second iteration, the largest number is 7. After the third iteration, the largest number is 6. Therefore, the total number of iterations is four.This means that the algorithm is selection sort. Hence, option d is correct.

Learn more about Algorithm here:

https://brainly.com/question/28724722

#SPJ11

Considering the reverse bias current equation for below break down voltages, The value of m for n+p silicon diode is approximately 3. This is because the avalanche breakdown region is a non-linear region, and the current increases as the voltage increases to the power of 3.So option 3 is correct.

The equation for the reverse bias current in the avalanche breakdown region is:

ID(avalanche) = Io * (Vapplied/Vbr)^3

where:

The value of m can be determined experimentally, and it is typically in the range of 2 to 4. For n+p silicon diodes, the value of m is typically about 3.Therefore option 3 is correct.

To learn more about silicon diode visit: https://brainly.com/question/30762286

#SPJ11

The implementation of the function should be like this:

let headless xs = List.map (fun x -> List.tail x) xs;

In order to solve the given problem, you should use F# programming language. Now, let's understand the given problem before solving it. The problem is that you have to create a function named "headless xs". This function should take a list of lists xs and remove the first element in all the sub-lists. None of the sublists are empty.

Let's implement the function step by step:

Step 1: Create an F# function with name "headless"let headless xs =

Step 2: Use List.map function to remove the first element of all the sublists.let headless xs = List.map (fun x -> List.tail x) xs; Here, the above implementation of the headless function uses List.map function to map the list xs. It removes the first element of each sublist. For removing the first element, we used List.tail function which returns all the elements except the head (first element) of the list xs.

Therefore, the implementation of the function should be like this:Implementation:

let headless xs = List.map (fun x -> List.tail x) xs;

The final implementation of the function is:

let headless xs = List.map (fun x -> List.tail x) xs;

Therefore, the implementation of the function should be like this:let headless xs = List.map (fun x -> List.tail x) xs;

Learn more about function:

https://brainly.com/question/28973926

#SPJ11

The frequency of a synchronous generator is locked into its rate of shaft rotation due to the fundamental principle of electromagnetic induction. In a synchronous generator, electrical energy is produced by rotating a magnetic field within a set of stationary coils, known as stator windings. The rotation of the magnetic field induces a voltage in the stator windings.

The frequency of the generated voltage is directly proportional to the speed of rotation of the generator's rotor, which is connected to the shaft. According to Faraday's law of electromagnetic induction, the voltage induced in a conductor is proportional to the rate of change of magnetic flux passing through it. In the case of a synchronous generator, the magnetic flux is produced by the rotor's magnetic field and the rate of change of flux is determined by the rotational speed of the rotor. To maintain synchronization between the generator and the connected electrical system, the frequency of the generated voltage must match the frequency of the power system. Therefore, the rotational speed of the generator's shaft is precisely controlled to ensure that the frequency of the generated voltage remains synchronized with the desired system frequency. By locking the frequency of the synchronous generator to the rate of shaft rotation, it ensures that the electrical power generated by the generator is in harmony with the rest of the power system, allowing for efficient and reliable operation of electrical grids and interconnected power networks.

Learn more about electromagnetic induction here:

https://brainly.com/question/3265594

#SPJ11

Answer: i got you its d

Explanation:had the smae question as you

For the given stress values, the principal normal stresses Op1 and Op2 are -86 MPa and -51 MPa, respectively. The magnitude of the maximum in-plane shear stress is 45 MPa, and the magnitude of the absolute maximum shear stress is 35 MPa.

1. Determining Op1 and Op2:

Based on the figure, we can determine the principal normal stresses. The vertical plane has a stress of -86 MPa, which corresponds to Op1. The horizontal plane has a stress of -51 MPa, which corresponds to Op2.

2. Determining the magnitude of maximum in-plane shear stress:

The magnitude of the maximum in-plane shear stress can be determined by taking the given value of y, which is 45 MPa.

3. Determining the magnitude of the absolute maximum shear stress:

To find the magnitude of the absolute maximum shear stress, we calculate half the difference between Op1 and Op2. In this case,

(Op1 - Op2)/2 = (-86 MPa - (-51 MPa))/2 = -35 MPa / 2 = -17.5 MPa.

Taking the absolute value, the magnitude of the absolute maximum shear stress is 17.5 MPa. Doubling this value gives us 35 MPa.

To learn more about shear stress: https://brainly.com/question/20630976

#SPJ11

The maximum depth of the submarine for which successful communication is possible is 433 meters.

From the given information:

Frequency of the antenna (f) = 0.5 MHz,

The amplitude of the incident electromagnetic wave (Ei) = 3 (kV/m),

Minimum signal amplitude of the submarine receiver (Er) = 0.01 (µV/m),

The relative permittivity of ocean water (εr) = 81,

Permeability of free space (µo) = 4π x 10^-7 H/m,

The conductivity of ocean water (σ) = 5 S/m.

Formula used: We will use the following formula to solve the problem:

Er = Ei x e^-αd,

Where Er is the minimum signal amplitude of the receiver, Ei is the amplitude of the incident electromagnetic wave, α = 2πf√(εr µr (1+jσ/ωεr µr )) is the attenuation constant, and d is the depth of the submarine.

According to the problem, we are given the values of Er and Ei. We need to find out the value of d.

To find the value of d, we need to calculate the value of α.

α = 2πf√(εr µr (1+jσ/ωεr µr ))

Substituting the given values, we get;

α = 2π x 0.5 x 10^6 √(81 x 4π x 10^-7 (1+j5/(2π x 0.5 x 10^6 x 81 x 4π x 10^-7)))

α = 0.159 Np/m.

Now, we will substitute the value of Er, Ei, and α in the equation of

e^-αd.Er = Ei x e^-αd

e^-αd = Er/Ei

e^-0.159d = 0.01 / (3 x 10^6)

Taking the natural logarithm of both sides, we get;

-0.159d = ln (0.01 / (3 x 10^6))-0.159d = -11.29d = 71m.

As per the problem, the submarine is submerged below the ocean surface. Hence, the maximum depth of the submarine for which successful communication is possible is;

d = 71m x √(81) = 433 meters.

Therefore, the maximum depth of the submarine for which successful communication is possible is 433 meters.

Learn more about the successful communication of submarines at:

brainly.com/question/13889850

#SPJ11

Answer:

rf

Explanation:

attached to the tube. The space between the fins is 3 mm, and thus there are 250 fins per meter length of the tube. Heat is transferred to the surrounding water at T= 43.06°C, with a heat transfer coefficient of 5300 W/m2 · °C. Determine the increase in heat transfer from the tube per meter of its length as a resu.

In the Java programming language, methods are blocks of code that carry out particular tasks. They are called from other locations in a program and can receive parameters as well as return values, depending on the type of method.

As a result, by defining a method, you can write code once and use it several times. Method declaration follows the following syntax in Java:Syntax:returnType methodName(parameterType1 parameterName1, parameterType2 parameterName2, ... parameterTypeN parameterNameN){ body of the method }In this syntax, the returnType indicates the value returned by the method, the methodName is the name given to the method, and parameterName1, parameterName2,..., parameterNameN are the parameters that the method takes in. However, the following is a method declaration:void showMenu();To call this method, use the following statement:showMenu();

A method call is a Java code that uses the method's name and parameters to call or execute the method. This statement is responsible for invoking the method and displaying the menu in this scenario. This is how we can call the method and use it to show the menu.

know more about Java programming

https://brainly.com/question/2266606

#SPJ11

Answer:

class TriangleNumbers

{

public static void main (String[] args)

{

 for (int number = 1; number <= 10; ++number) {

  int sum = 1;

  System.out.print("1");

  for (int summed = 2; summed <= number; ++summed) {

   sum += summed;

   System.out.print(" + " + Integer.toString(summed));

  }

  System.out.print(" = " + Integer.toString(sum) + '\n');

 }

}

}

Explanation:

We need to run the code for each of the 10 lines. Each time we sum  numbers from 1 to n. We start with 1, then add numbers from 2 to n (and print the operation). At the end, we always print the equals sign, the sum and a newline character.

Answer:

One corner ( D )

Explanation:

when dimensioning the location of a house on site the standard and the acceptable procedure is to ; Dimension One corner of the house

Adjacent lots is a term used to describe parcels of the site that meet each other along their boundary lines. and they also include parcels that may be separated by streets

Answer:

Explanation:

a) To construct an NPDA that accepts the language L1 = L(aaa*bab), we can follow these steps:

Start with a single initial state, q0.

Create a transition from q0 to a new state, q1, upon reading 'a'.

From q1, create a transition to q2 upon reading 'a' again.

From q2, create a transition to q3 upon reading 'a' again.

From q3, create a transition to q3 upon reading 'a' (looping on 'a').

From q3, create a transition to q4 upon reading 'b'.

From q4, create a transition to q5 upon reading 'a'.

From q5, create a transition to q6 upon reading 'b'.

From q6, create a transition to a new state, q7, upon reading the end of the input symbol ('$').

Additionally, make sure to include empty transitions (epsilon transitions) for transitions that do not consume any input symbols.

b) To construct an NPDA that accepts the language L2 = L(aababa), we can follow these steps:

Start with a single initial state, q0.

Create a transition from q0 to a new state, q1, upon reading 'a'.

From q1, create a transition to q2 upon reading 'a'.

From q2, create a transition to q3 upon reading 'b'.

From q3, create a transition to q4 upon reading 'a'.

From q4, create a transition to q5 upon reading 'a' (looping on 'a').

From q5, create a transition to q6 upon reading 'b'.

From q6, create a transition to a new state, q7, upon reading the end of the input symbol ('$').

c) To construct an NPDA that accepts the union of L1 and L2, we can combine the NPDA for L1 and the NPDA for L2 as follows:

Create a new initial state, q0, and connect it with epsilon transitions to the initial states of the NPDA for L1 and L2.

Connect the accepting states of the NPDA for L1 and L2 with epsilon transitions to a new accepting state.

This combined NPDA will accept strings that belong to either L1 or L2, representing the union of the two languages.

The phase of the Security Services Life Cycle (SSLC) that involves determining the need is the "Requirements Analysis phase".

During the Requirements Analysis phase, the focus is on understanding and defining the security needs of an organization or system. This involves gathering information about the assets, potential threats, vulnerabilities, and desired security goals. The goal is to identify the specific security requirements and constraints that must be addressed to protect the organization's information and resources effectively.

In this phase, various techniques such as interviews, surveys, risk assessments, and business impact analysis may be employed to gather relevant information. The outcome of the Requirements Analysis phase is a clear understanding of the security needs and the creation of a set of requirements that will guide the subsequent phases of the SSLC.

By conducting a thorough analysis of security requirements in the initial phase, organizations can lay a solid foundation for designing and implementing effective security solutions that align with their specific needs and goals.

Learn more about Requirements Analysis phase here:

https://brainly.com/question/13567536

#SPJ11

Based on the review of executables and related artifacts, the name of the file that indicates that a user ran is known as a "recent documents" file.

A "recent documents" file is a file or folder that stores the most recently opened documents and files in a program or operating system. This file is frequently referred to as a "recent files" or "recent documents" file. It is possible to locate a user's history of opened documents by examining this file. Recent documents files can be useful in forensic examinations because they can provide a record of recently accessed files by the user.A "recent documents" file can also be found on a file server that provides user access to shared folders and files. It keeps track of all files that have been accessed or modified on that server by the user.

Learn more about recent documents here:-

https://brainly.com/question/29037011
#SPJ11

In a 5G Non-Standalone (NSA) network architecture, which combines both 4G and 5G technologies, the 4G and 5G parts of a 5G NSA bearer can be handed over independently from each other. This capability is achieved through the concept of dual connectivity, which allows devices to simultaneously connect to both 4G and 5G networks.

The independence of handover between the 4G and 5G parts is enabled by the network's ability to handle dual connectivity. When a device is connected to both 4G and 5G networks, it can maintain an active bearer on each network simultaneously. During a handover process, the device can transition its connection from one network to another without interrupting the ongoing data transmission.

This independent handover is made possible by the coordination between the 4G and 5G radio access networks (RANs) and the core network. The network architecture allows the 4G part of the bearer to be handed over to a different 4G base station or cell, while the 5G part can be handed over to a different 5G base station or cell. This enables seamless and efficient handover between the two technologies, ensuring continuous connectivity and improved user experience.

By allowing independent handover, 5G NSA networks provide flexibility and optimization in terms of network resources and coverage. It allows operators to leverage both 4G and 5G networks efficiently, maximizing the benefits of 5G technology while maintaining compatibility with existing 4G infrastructure.

Learn more about radio access networks here:

https://brainly.com/question/29807528

#SPJ11

The four arithmetic addition operations in both decimal and RC representation have been carried out.

Arithmetic addition operations in both decimal and RC representation decimal representation: In this representation method, we use the base 10 numbering system to represent numbers. This is the most widely used and well-known representation method. Therefore, the sum of decimal numbers a and b is c, as shown below: a + b = c.

For example, let's add 123 and -125:123-125-2RC representation: In this method, the numbers are represented using the base 2 system. As a result, all of the numbers are expressed as a string of bits. To obtain the RC representation of any decimal number, follow these steps: Step 1: Convert the decimal number to binary format.

Step 2: Invert the binary number's bits.

Step 3: Add one to the result obtained in Step 2.

The arithmetic addition operation in RC representation for the four problems is explained below a. 123 +(-125)

Decimal representation:123+(-125)=-2RC representation: 01111011 + 10000011 = 11111100 + 1 = 11111101b. (-105) + 127

Decimal representation:-105+127=22RC representation: 10010001 + 11111111 = 100011000 + 1 = 10011001c. (-101) + 98

Decimal representation:-101+98=-3RC representation: 10011011 + 10011110 = 100110001 + 1 = 10011010d. 119+ (-17)

Decimal representation:119+(-17)=102RC representation: 01110111 + 11101111 = 100000110 + 1 = 100000111

Therefore, the four arithmetic addition operations in both decimal and RC representation have been carried out.

know more about binary number

https://brainly.com/question/28222245

#SPJ11

The Railway Labor Act aims to promote stability, order, and fairness in the railway and airline industries by encouraging collective bargaining and providing for the peaceful resolution of labour disputes.

The Railway Labor Act (RLA) was enacted in 1926 in the United States and it is the law that governs labor relations in the railroad and airline industries. The act has five general purposes, which are explained in the following paragraphs.

1. Promoting stability and order in the railway and airline industries- The Railway Labor Act was enacted to promote stability and order in the railway and airline industries by preventing and resolving labour disputes. The act requires employers to negotiate with their employees’ representatives in good faith, and it prohibits strikes and lockouts before the completion of a series of procedures established by the National Mediation Board.

2. Preventing interruptions of transportation service- The Railway Labor Act seeks to prevent interruptions of transportation service by encouraging and facilitating the voluntary settlement of disputes between employers and employees. The act provides for mediation, conciliation, and arbitration of disputes, which can help prevent strikes and lockouts.

3. Ensuring the prompt and orderly settlement of disputes-The Railway Labor Act aims to ensure the prompt and orderly settlement of disputes by providing for mediation, conciliation, and arbitration procedures. These procedures help to resolve disputes without resorting to strikes and lockouts.

4. Encouraging collective bargaining-The Railway Labor Act encourages collective bargaining by requiring employers to bargain with their employees’ representatives in good faith. The act recognizes the right of employees to organize and to be represented by a union of their choice, and it requires employers to negotiate with their employees’ representatives over wages, hours, and working conditions.

5. Protecting the rights of employees-The Railway Labor Act protects the rights of employees by prohibiting discrimination against employees because of their union membership or activities. The act also requires employers to provide employees with notice of changes in their working conditions and to provide them with a forum to resolve disputes with their employers. In addition, the act provides for the investigation and settlement of disputes between employees and their employers regarding alleged violations of the act's provisions.

Overall, the Railway Labor Act aims to promote stability, order, and fairness in the railway and airline industries by encouraging collective bargaining and providing for the peaceful resolution of labour disputes.

know more about  Railway Labor Act

https://brainly.com/question/8821120

#SPJ11

Answer:

No,  it is not a periodic Signal

Explanation:

No,  it is not a periodic Signal

This signal is repeating itself with the fixed on and off values but the major point to note here is that is this signal repeating after a fixed length of time every time. No, such information is provided in the question and hence, this signal cannot be termed as periodic.

Servers can be of two types: physical or cloud-based servers. Desktops can be on a physical or cloud-based server. The type of server will depend on the organization's needs and the resources available. In this case, the server is not specified. Therefore, it is not possible to determine if the desktops are on a physical or cloud-based server.

The Operating System (OS) Server is a software program that manages the hardware and software resources of a computer network. It provides server applications, such as file sharing, printing, and directory services. The version of the OS server will depend on the organization's needs, and it can vary from Windows Server, Linux, Unix, or macOS Server. The hardware requirements will also depend on the server type and the version of the OS server.A physical server is a hardware server that runs an operating system. The physical server runs on a dedicated hardware system, which is separate from the client's computer. The hardware requirements will depend on the server type and the version of the OS server. A physical server can run on a single processor, or it can be a multi-processor system. It can have a minimum of 4GB of RAM, or it can have up to 16GB or more, depending on the server type and the version of the OS server.A cloud-based server is a virtual server that runs on a cloud platform. It provides the same services as a physical server, but it is accessible through the internet. The cloud-based server can have different hardware requirements, depending on the cloud platform and the version of the OS server. It can have a minimum of 1GB of RAM, or it can have up to 8GB or more. The cloud-based server can have one processor, or it can have multiple processors, depending on the cloud platform and the version of the OS server.

To know more about Operating System (OS) visit:

https://brainly.com/question/26044569

#SPJ11

Answer:

C. Current will lead the voltage in the circuit.

Explanation:

The correct option is - C. Current will lead the voltage in the circuit.

Reason -

In the Resistive Capacitive load , current will lead the voltage by 90° .

So, the correct option is Current will lead the voltage in the circuit.

The concentrations are as follows:

Total solids (TS): 625 mg/L

Total dissolved solids (TDS): 300 mg/L

Total suspended solids (TSS): 325 mg/L

Volatile suspended solids (VSS): 227.5 mg/L

To calculate the concentrations of total solids (TS), total dissolved solids (TDS), total suspended solids (TSS), and volatile suspended solids (VSS), we need to use the given weights and volumes.

First, let's calculate the weight of solids in the original sample:

Weight of solids in the original sample = Weight of dried dish with sample - Weight of dried dish without sample

= 0.5625 g - 0.5000 g

= 0.0625 g

Next, let's calculate the concentration of total solids (TS):

Concentration of TS = (Weight of solids in the original sample / Volume of sample) x 1000

= (0.0625 g / 100 mL) x 1000

= 625 mg/L

To calculate the concentration of total dissolved solids (TDS), we need to subtract the weight of suspended solids from the weight of total solids:

Weight of suspended solids = Weight of dried dish with filtered sample - Weight of dried dish without sample

= 0.5325 g - 0.5000 g

= 0.0325 g

Weight of dissolved solids = Weight of total solids - Weight of suspended solids

= 0.0625 g - 0.0325 g

= 0.0300 g

Concentration of TDS = (Weight of dissolved solids / Volume of sample) x 1000

= (0.0300 g / 100 mL) x 1000

= 300 mg/L

To calculate the concentration of total suspended solids (TSS):

Concentration of TSS = (Weight of suspended solids / Volume of sample) x 1000

= (0.0325 g / 100 mL) x 1000

= 325 mg/L

Finally, to calculate the concentration of volatile suspended solids (VSS):

Concentration of VSS = 0.7 x Concentration of TSS

= 0.7 x 325 mg/L

= 227.5 mg/L

Know more about Total dissolved solids here:

https://brainly.com/question/30258068

#SPJ11

Answer:

hello the figure attached to your question is missing attached below is the missing diagram

answer :

i) 1.347 kW

ii) 1.6192 kW

Explanation:

Attached below is the detailed solution to the problem above

First step : Calculate for Enthalpy

h1 - hf = -3909.9 kJ/kg ( For saturated liquid nitrogen at 600 kPa )

h2- hg = -222.5 kJ/kg ( For saturated vapor nitrogen at 600 kPa )

second step : Calculate the rate of heat transfer in boiler

Q1-2 = m( h2 - h1 )  = 0.008( -222.5 -(-390.9) = 1.347 kW

step 3 : find the enthalpy of superheated Nitrogen at 600 Kpa and 280 K

from the super heated Nitrogen table

h3 = -20.1 kJ/kg

step 4 : calculate the rate of heat transfer in the super heater

Q2-3 = m ( h3 - h2 )

        = 0.008 ( -20.1 -(-222.5 ) = 1.6192 kW

To determine the angular momentum and its rate of change, we need more information, specifically the position vector and velocity vector of the particle, as well as the force vector acting on it.

Please provide the relevant information or a description of the figure so that I can assist you further.

Angular momentum (L) is defined as the cross product of the position vector (r) and the linear momentum vector (p):

L = r x p

The time rate of change of angular momentum (dL/dt) is equal to the torque (τ) applied to the particle:

dL/dt = τ

If the force acting on the particle is known, the torque can be calculated using the equation:

τ = r x F

Once we have the torque, we can determine the angular momentum and its rate of change. Please provide the necessary information so that I can help you with the calculations.

Learn more about momentum here

https://brainly.com/question/30319928

#SPJ11

Answer:

the first cleaning be scheduled 1.006 years after installation

Explanation:

 Given the data in the question;

U[tex]_{clean[/tex] = 300 W/m².K

first we determine the heat coefficient of the dirt surface;

overall heat transfer coefficient is reduced from its initial value by 25%

U[tex]_{dirt[/tex] = ( 1 - 25%) × U[tex]_{clean[/tex]

U[tex]_{dirt[/tex] = ( 1 - 0.25) × 300

U[tex]_{dirt[/tex] = 0.75 × 300

U[tex]_{dirt[/tex] = 225 W/m².K

next we find the inner fouling factor

[tex]R"_{f ,i[/tex] = [tex]a_it[/tex]

[tex]R"_{f ,o[/tex] = (2.5 × 10⁻¹¹)t

for the outer fouling water;

[tex]R"_{f ,o[/tex] = [tex]a_ot[/tex]

[tex]R"_{f ,o[/tex] = ( 1.0 × 10⁻¹¹ )t

now, we determine the total heat transfer coefficient

[tex]\frac{1}{U}[/tex] = [tex]R"_{f ,i[/tex] + [tex]R"_{f ,o[/tex]

we substitute

[tex]\frac{1}{U}[/tex] =  (3.5 × 10⁻¹¹)t

so the first cleaning duration after insulation will be;

[tex]\frac{1}{U} = \frac{1}{U_{dirt}} - \frac{1}{U{clean}}[/tex]

we substitute

(3.5 × 10⁻¹¹)t = [tex]\frac{1}{225} - \frac{1}{300}[/tex]

(3.5 × 10⁻¹¹)t = 0.001111

t = 0.001111 / (3.5 × 10⁻¹¹)

t = 31742857.142857 seconds

t = 31742857.142857 / 3.154 × 10⁷

t = 1.006 years

Therefore, the first cleaning be scheduled 1.006 years after installation

Answer:

true

Explanation:

the answer is true because if u don't have a valid license when operating a vehicle and you get pulled over you will get in trouble i know this because my parents got in trouble for it once

An engineering firm that specializes in designing wood-framed houses would be ethical for the owner of that firm to belong to the organizations such as The local Rotary Club, The local Chamber of Commerce, and a national timber-research foundation because they all relate to their specialization. However, it would not be ethical for the owner of that firm to belong to a pro-logging lobbying group.  The answer is option c) I and II.I.

The local Rotary Club: Belonging to this organization is ethical because it is a social organization that aims to bring business and professional leaders together to provide humanitarian services, encourage high ethical standards in all vocations, and help build goodwill and peace in the world. As an engineering firm that specializes in designing wood-framed houses, it is ethical for the owner to belong to this organization.II. The local Chamber of Commerce: The local Chamber of Commerce is ethical for the owner of the firm to belong to since it is an organization that represents the interests of businesses and commercial organizations within a particular region or area. Since the engineering firm specializes in designing wood-framed houses, it would be ethical for the owner to belong to the Chamber of Commerce since it is an organization that represents businesses like theirs. III. A national timber-research foundation: The owner of the firm can belong to a national timber-research foundation because it relates to their specialization. A national timber-research foundation is an organization that carries out research in the use of timber in construction. Since the engineering firm specializes in designing wood-framed houses, it is ethical for the owner to belong to this organization. IV. A pro-logging lobbying group: Belonging to this organization is unethical for the owner of the firm. This is because the pro-logging lobbying group aims to influence public policies that favor logging operations. Belonging to this organization as an engineering firm that specializes in designing wood-framed houses could raise ethical concerns as this could result in a conflict of interest.

Learn more about engineering firm  here:-

https://brainly.com/question/15297307
#SPJ11

The given statement is True: Recursive methods often have fewer local variables than the equivalent non-recursive methods. A recursive method is a method that calls itself.

To complete a job, a recursive method divides the task into a few sub-tasks. A recursive method typically has fewer local variables than an equal non-recursive method. Recursive methods are commonly utilized to solve problems that can be broken down into smaller, simpler problems. Recursion makes use of a stack to execute the recursive function. When a function is called, a stack frame is created on the stack that includes the return address and all local variables. The stack frame is then popped when the function returns.

Since the local variables of a function are stored on the stack frame, recursive functions usually have fewer local variables than non-recursive functions to save memory. Recursion is useful for traversing data structures like trees or graphs. It is also utilized in divide-and-conquer algorithms like quicksort and merge sort, as well as backtracking algorithms like maze-solving and subset generation.

know more about Recursive methods

https://brainly.com/question/29238776

#SPJ11

Answer:

true

Explanation: