In an earlier module, you created programs that read the contents of a large file and process it, writing the results into another large file (Code at end). What if the files were 10x bigger, i.e. instead of a million rows, they were 10 million rows? Which of the following methods would have the fastest processing time:Run the process as it is, with the larger files.Break the files up into 10 files and schedule processes to run 30 seconds or 1 minute apart, then combine the resulting files into a single output file.Break the files up into 2 files and schedule processes to run 30 seconds or 1 minute apart, then combine the resulting files into a single output file.Break the files up into 5 files and schedule processes to run 30 seconds or 1 minute apart, then combine the resulting files into a single output file.Break the files up into 20 files and schedule processes to run 30 seconds or 1 minute apart, then combine the resulting files into a single output file.Can you think of other ways to increase efficiency and reduce processing time?Code from previous lesson:import randomimport osimport sys#getting the datetime importfrom datetime import datetime#read the entire file into memory and printdef readFile1(filename):f = open(filename)all_lines = f.readlines()all_lines = "".join(all_lines)print(all_lines)#read the file one line at a time in memory and print itdef readFile2(filename):with open(filename) as f:for line in f:print(line)def readFile3(filename):#get file sizef_size = os.path.getsize(filename)f = open(filename)#depending upon the file size determine the half way mark in bytesif f_size % 2 == 0:read_until = int(f_size/2)else:read_until = int((f_size+1)/2)#read the first half of the file into memoryfirst_half = f.read(read_until)#print the first half that has been read into memoryall_lines = "".join(first_half)print(all_lines)print(">>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<")#read the second part into memory using file seekf.seek(read_until+1)second_half = f.read()#print the second half that has been read into memoryall_lines = "".join(second_half)print(all_lines)def main():# What time does this start at?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)# open a file named file2outfile = open('file2.txt', 'w')# produce the numbersfor count in range(1000000):#get a random numbernum = random.randint(1,1000)outfile.write(str(num) + "\n")#Close out the text fileoutfile.close()print('Data complete')# How long did it take?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)#get the filename from command line argumentfilename = 'file2.txt'# What time does this start at?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)#read file using style 1readFile1(filename)# How long did it take?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)print("-------------------------")# What time does this start at?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)#read file using style 2readFile2(filename)# How long did it take?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)print("-------------------------")# What time does this start at?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)#read file using style 3readFile3(filename)# How long did it take?now = datetime.now()current_time = now.strftime("%H:%M:%S")print("Current time = ", current_time)main()

If the files are 10 times larger and contain 10 million rows, option 2 (breaking the files up into 10 files and scheduling processes to run 30 seconds or 1 minute apart) would likely have the fastest processing time. This is because breaking the files into smaller chunks and processing them in parallel would allow the processes to run concurrently, potentially reducing the overall processing time.

Other ways to increase efficiency and reduce processing time could include optimizing the code to run faster, using a faster computer or server with more resources (such as a higher number of CPU cores or more memory), or using a distributed processing system such as Apache Spark to process the data in parallel across a cluster of computers.

It's also worth noting that the specific method that would have the fastest processing time will depend on the specific details of the problem and the hardware and software being used. It might be useful to benchmark and compare the performance of different approaches to determine the most efficient solution.

Learn more about increase efficiency here, https://brainly.com/question/13828557

#SPJ4

How does it relate
to public domain
and fair use?

Joseph learned in his physics class that centimeter is a smaller unit of length and a hundred centimeters group to form a larger unit of length called a meter. Joseph recollected that in computer science, a bit is the smallest unit of data storage and a group of eight bits forms a larger unit. Which term refers to a group of eight binary digits? A. bit B. byte O C. kilobyte D. megabyte​

In java I need help on this specific code for this lab.


Problem 1:


Create a Class named Array2D with two instance methods:


public double[] rowAvg(int[][] array)


This method will receive a 2D array of integers, and will return a 1D array of doubles containing the average per row of the 2D array argument.


The method will adjust automatically to different sizes of rectangular 2D arrays.


Example: Using the following array for testing:


int [][] testArray =

{

{ 1, 2, 3, 4, 6},

{ 6, 7, 8, 9, 11},

{11, 12, 13, 14, 16}

};

must yield the following results:


Averages per row 1 : 3.20

Averages per row 2 : 8.20

Averages per row 3 : 13.20

While using this other array:


double[][] testArray =

{

{1, 2},

{4, 5},

{7, 8},

{3, 4}

};


must yield the following results:


Averages per row 1 : 1.50

Averages per row 2 : 4.50

Averages per row 3 : 7.50

Averages per row 4 : 3.50

public double[] colAvg(int[][] array)


This method will receive a 2D array of integers, and will return a 1D array of doubles containing the average per column of the 2D array argument.


The method will adjust automatically to different sizes of rectangular 2D arrays.


Example: Using the following array for testing:


int [][] testArray =

{

{ 1, 2, 3, 4, 6},

{ 6, 7, 8, 9, 11},

{11, 12, 13, 14, 16}

};

must yield the following results:


Averages per column 1: 6.00

Averages per column 2: 7.00

Averages per column 3: 8.00

Averages per column 4: 9.00

Averages per column 5: 11.00

While using this other array:


double[][] testArray =

{

{1, 2},

{4, 5},

{7, 8},

{3, 4}

};


must yield the following results:


Averages per column 1: 3.75

Averages per column 2: 4.75



My code is:


public class ArrayDemo2dd

{


public static void main(String[] args)

{

int [][] testArray1 =

{

{1, 2, 3, 4, 6},

{6, 7, 8, 9, 11},

{11, 12, 13, 14, 16}

};

int[][] testArray2 =

{

{1, 2 },

{4, 5},

{7, 8},

{3,4}

};


// The outer loop drives through the array row by row

// testArray1.length has the number of rows or the array

for (int row =0; row < testArray1.length; row++)

{

double sum =0;

// The inner loop uses the same row, then traverses all the columns of that row.

// testArray1[row].length has the number of columns of each row.

for(int col =0 ; col < testArray1[row].length; col++)

{

// An accumulator adds all the elements of each row

sum = sum + testArray1[row][col];

}

//The average per row is calculated dividing the total by the number of columns

System.out.println(sum/testArray1[row].length);

}

} // end of main()


}// end of class


However, it says there's an error... I'm not sure how to exactly do this type of code... So from my understanding do we convert it?

What is a foreign key? a security key to a database that stores foreign data a security key to a database located in another country a field in a table that uniquely identifies a record in a relational database a field in a table that links it to other tables in a relational database

How was the first computer reprogrammed

Create a list of 30 words, phrases and company names commonly found in phishing messages. Assign a point value to each based on your estimate of its likeliness to be in a phishing message (e.g., one point if it’s somewhat likely, two points if moderately likely, or three points if highly likely). Write a program that scans a file of text for these terms and phrases. For each occurrence of a keyword or phrase within the text file, add the assigned point value to the total points for that word or phrase. For each keyword or phrase found, output one line with the word or phrase, the number of occurrences and the point total. Then show the point total for the entire message. Does your program assign a high point total to some actual phishing e-mails you’ve received? Does it assign a high point total to some legitimate e-mails you’ve received?

Which of the following techniques is a direct benefit of using Design Patterns? Please choose all that apply Design patterns help you write code faster by providing a clear idea of how to implement the design. Design patterns encourage more readible and maintainable code by following well-understood solutions. Design patterns provide a common language / vocabulary for programmers. Solutions using design patterns are easier to test

An example of a host-based intrusion detection tool is the tripwire program. This is a file integrity checking tool that scans files and directories on the system on a regular basis and notifies the administrator of any changes. It uses a protected database of cryptographic checksums for each file checked and compares this value with that recomputed on each file as it is scanned. It must be configured with a list of files and directories to check and what changes, if any, are permissible to each. It can allow, for example, log files to have new entries appended, but not for existing entries to be changed. What are the advantages and disadvantages of using such a tool? Consider the problem of determining which files should only change rarely, which files may change more often and how, and which change frequently and hence cannot be checked. Hence consider the amount of work in both the configuration of the program and on the system administrator monitoring the responses generated.

To use cache memory main memory are divided into cache lines typically 32 or 64 bytes long.an entire cache line is cached at once what is the advantage of caching an entire line instead of single byte or word at a time?

Read the 4 entities below and assume that customer_id is the key common to all tables.
Customer: An entity that describes a customer. An instance occurs for unique customers only using name, date of birth, and login name as customer_id primary key.
Online: An entity that describes a customer purchasing activity online. An instance occurs when the customer completes the transaction. Customers can purchase more than once.
Visits: An entity that describes a customer purchase in a physical store. An instance occurs if a customer makes or purchase or checks-in using an app. Customers can visit more than once per day.
Satisfaction: An entity that represents data from a recent customer satisfaction survey. An instance occurs when a customer takes the Survey. A customer is tracked by login name and can only take the survey one time.
Use the information to match the following relationships. Answers can be reused more than once.
1. The relationship between Customer and Online.
2. The relationship between Customer and Satisfaction.
3. The relationship between Online and Visits.
4. The relationship between Visits and Satisfaction
A. prototype
B. one-to-one
C. Zero-sum
D. one-to-many
E. TOO many
F. many-to-many

To add musical notes or change the volume of sound, use blocks from.

i. Control ii. Sound iii. Pen​

the
Wnte
that
Program
will accept three
Values of
sides of a triangle
from
User and determine whether Values
carceles, equal atera or sealen
- Outrast of your
a
are for
an​

Suppose you have the following search space:

State
next
cost

A
B
4

A
C
1

B
D
3

B
E
8

C
C
0

C
D
2

C
F
6

D
C
2

D
E
4

E
G
2

F
G
8

Draw the state space of this problem.

Assume that the initial state is A and the goal state is G. Show how each of the following search strategies would create a search tree to find a path from the initial state to the goal state:
Breadth-first search
Depth-first search
Uniform cost search

​

Complete the problem about Olivia, the social worker, in this problem set. Then determine the telecommunications tool that would best meet Olivia's needs.


PDA

VoIP

facsimile

Internet

Write a line of code that declares a variable called shipName and set it equal to the string SpaceX3000.

Earl develops a virus tester which is very good. It detects and repairs all known viruses. He makes the software and its source code available on the web for free and he also publishes an article on it. Jake reads the article and downloads a copy. He figures out how it works, downloads the source code and makes several changes to enhance it. After this, Jake sends Earl a copy of the modified software together with an explanation. Jake then puts a copy on the web, explains what he has done and gives appropriate credit to Earl.
Discuss whether or not you think Earl or Jake has done anything wrong?

Discuss the relationship of culture and trends?

Suppose you are choosing between the following three algorithms:
• Algorithm A solves problems by dividing them into five subproblems of half the size, recursively solving each subproblem, and then combining the solutions in linear time.
• Algorithm B solves problems of size n by recursively solving two subproblems of size n − 1 and then combining the solutions in constant time.
• Algorithm C solves problems of size n by dividing them into nine sub-problems of size n=3, recursively solving each sub-problem, and then combining the solutions in O(n2) time.
What are the running times of each of these algorithms (in big-O notation), and which would you choose?

A non-profit organization decides to use an accounting software solution designed for non-profits. The solution is hosted on a commercial provider's site but the accounting information suchas the general ledger is stored at the non-profit organization's network. Access to the software application is done through an interface that uses a coneventional web browser. The solution is being used by many other non-profit. Which security structure is likely to be in place:

examples of pop in computer​

SOMEONE PLS HELP?!?!!

What is the difference between an information system and a computer application?

Before hard disk drives were available, computer information was stored on:

Floppy Disks

Cassette Tapes

Punch Cards

All of the Above

Write the Java classes for the following classes. Make sure each includes 1. instance variables 2. constructor 3. copy constructor Submit a PDF with the code The classes are as follows: Character has-a name : String has-a health : integer has-a (Many) weapons : ArrayList has-a parent : Character has-a level : Level (this should not be a deep copy) Level has-a name : String has-a levelNumber : int has-a previousLevel : Level has-a nextLevel : Level Weapon has-a name : String has-a strength : double Monster is-a Character has-a angryness : double has-a weakness : Weakness Weakness has-a name : String has-a description: String has-a amount : int

What is the command to launch each of the following tools? Local Group Policy Local Security Policy Computer Management console Local Users and Groups console Resultant Set of Policy (RSoP)

This lab was designed to teach you more about using Scanner to chop up Strings. Lab Description : Take a group of numbers all on the same line and average the numbers. First, total up all of the numbers. Then, take the total and divide that by the number of numbers. Format the average to three decimal places Sample Data : 9 10 5 20 11 22 33 44 55 66 77 4B 52 29 10D 50 29 D 100 90 95 98 100 97 Files Needed :: Average.java AverageRunner.java Sample Output: 9 10 5 20 average = 11.000 11 22 33 44 55 66 77 average = 44.000 48 52 29 100 50 29 average - 51.333 0 average - 0.000 100 90 95 98 100 97 average - 96.667

Which of the following describes a codec? Choose all that apply.
a computer program that saves a digital audio file as a specific audio file format
short for coder-decoder
converts audio files, but does not compress them

Animation timing is does not affect the
speed of the presentation
Select one:
True
False​

Which of the follwing are examples of meta-reasoning?
A. She has been gone long so she must have gone far.
B. Since I usually make the wrong decision and the last two decisions I made were correct, I will reverse my next decision.
C. I am getting tired so I am probably not thinking clearly.
D. I am getting tired so I will probably take a nap.

Write a SELECT statement that displays each product purchased, the category of the product, the number of each product purchased, the maximum discount of each product, and the total price from all orders of the item for each product purchased. Include a final row that gives the same information over all products (a single row that provides cumulative information from all your rows). For the Maximum Discount and Order Total columns, round the values so that they only have two decimal spaces. Your result