In February 2004, scientists at Purdue University used a highly sensitive technique to measure the mass of a vaccinia virus (the kind used in smallpox vaccine). The procedure involved measuring the frequency of oscillation of a tiny sliver of silicon (just 32.0 nm long) with a laser, first without the virus and then after the virus had attached itself to the silicon. The difference in mass caused a change in the frequency. We can model such a process as a mass on a spring.

Required:
a. Find the ratio of the frequency with the virus attached ( fS+V) to the frequency without the virus (fS) in terms of mV and mS, where mV is the mass of the virus and mS is the mass of the silicon sliver.
b. In some data, the silicon sliver has a mass of 2.13×10^-16 g and a frequency of 2.04×10^15 Hz without the virus and 2.85×1014 with the virus. What is the mass of the virus in grams?

Answers

Answer 1

Answer:

a)   m_v = m_s (([tex]\frac{w_o}{w}[/tex])² - 1) ,  b)  m_v = 1.07 10⁻¹⁴ g

Explanation:

a) The angular velocity of a simple harmonic motion is

           w² = k / m

where k is the spring constant and m is the mass of the oscillator

let's apply this expression to our case,

silicon only

         w₉² = [tex]\frac{K}{m_s}[/tex]

         k = w₀² m_s

silicon with virus

         w² = [tex]\frac{k}{m_s + m_v}[/tex]

          k = w² (m_v + m_s)

in the two expressions the constant k is the same and q as the one property of the silicon bar, let us equal

           w₀²  m_s = w² (m_v + m_s)

           m_v = ([tex]\frac{w_o}{w}[/tex])²  m_s - m_s

           m_v = m_s (([tex]\frac{w_o}{w}[/tex])² - 1)

b) let's calculate

          m_v = 2.13 10⁻¹⁶ [([tex]\frac{20.4}{2.85}[/tex])² - 1)]

          m_v = 1.07 10⁻¹⁴ g


Related Questions

Student Exploration: Energy Conversion in a SystemNCVPS Chemistry Fall 2014Vocabulary: energy, gravitational potential energy, heat energy, kinetic energy, law of conservation of energy, specific heat capacityPrior Knowledge Questions (Do these BEFORE using the Gizmo.)A battery contains stored energy in the form of chemical energy.1. What are some examples of devices that are powered by batteries? ____________________________________________________________________________________________2. What different forms of energy are dmonstrated by these devices? ___________________ _________________________________________________________________________Gizmo Warm-upEnergy constantly changes from one form to another, but in a closed system, the total amount of energy always remains the same. This concept is known formally as the law of conservation of energy.The Energy Conversion in a System Gizmo™ allows you to observe the law of conservation of energy in action. In the Gizmo, a suspended cylinder has gravitational potential energy. When the cylinder is released, the

Answers

Answer:

a) Battery-operated devices have: small led lights, flashlights, wireless keyboards and mice, watches, electronic weights

b) ed lights and flashlights transform into light energy and thermal energy

c)  Em₀ = U = m gh,  Em_f = K = ½ m v²

Explanation:

In this exercise ask to complete the sentences

a) Battery-operated devices have: small led lights, flashlights, wireless keyboards and mice, watches, electronic weights

   

b) These devices transform the chemical energy stored in the batteries into other forms of energy.

Led lights and flashlights transform into light energy and thermal energy

Keyboards transform into electromagnetic energy that is emitted

clocks transform to mechanical energy from the movement of the needles

Electronic weights transforms the chemical energy of the baria into gravitational potential energy that prevents the movement of the plate and this translates into the reading of the body weight

c) The total energy of the cylinder mechanical energy when sustained is

          Em₀ = U = m gh

it is transformed as it descends into kinetic energy, at any point

          Emₙ = K + U = 1/2 m v² + m g y

at the lowest point of the trajectory all energy is transformed

           Em_f = K = ½ m v²

Which statement best describes work in the scientific sense?
O A. Work is the sum of the distances an object moves due to the
forces applied to it.
O B. Work is the number of tasks done in the amount of time needed to
complete them.
O C. Work is the ratio of the force acting on an object and the distance
the object travels.
O D. Work is the product of a force and the distance an object moves
because of the force.

Answers

Answer:

the answer is D I tought

1. Describe the following energy transformations for the following scenario:
A student plays piano in music class.

Answers

Answer:

Explanation:

iphotosynthesis 2coal burning 3electric motor 4 electricity generator 5 waterturbines 6 solar bulb

A rock falls from a cliff and hits the ground at a velocity of 31m/s. How long did it take to fall?

Answers

Answer:

i dont know  man

Explanation:

i dont know man

Lucy moves down the hall at 3.5 m/s. When he sees Luke coming, he slows down. After 4.0 s, he is moving at 2.1. m/s. What is his acceleration?​

Answers

Answer:

Acceleration, a = 0.35 m/s²

Explanation:

Given the following data;

Initial velocity, u = 3.5 m/s²

Final velocity, v = 2.1 m/s²

Time, t = 4 secs

To find the acceleration, we would use the first equation of motion;

V = u - at (the sign is negative because Lucy is slowing down).

Substituting into the formula, we have;

2.1 = 3.5 - a(4)

2.1 = 3.5 - 4a

4a = 3.5 - 2.1

4a = 1.4

a = 1.4/4

a = 0.35 m/s²

Which macronutrient is made up of carbon and hydrogen elements joined together in long groups called hydrocarbons?

 Proteins Magnesium Potassium Fats​

Answers

Answer:

FATS

Explanation:

Fats are made up of carbon and hydrogen elements joined together in long groups called hydrocarbons. The simplest unit of fat is the fatty acid, of which there are two types: saturated and unsaturated.

The macronutrient which is made up of carbon and hydrogen elements joined together in long groups called hydrocarbons is: D. Fats​.

A macronutrient refers to a very large molecule (structure) that comprises covalently bonded organic atoms (hydrocarbons) and smaller molecular structures (monomers).

In Science, macronutrients are grouped into four (4) main categories and these are;

Nucleic acid.Carbohydrates.Proteins.Fats (Lipids).

Fats (Lipids) are macronutrients that are typically made up of both carbon and hydrogen elements, which are joined together in long groups referred to as hydrocarbons.

Find more information: https://brainly.com/question/14681125

Imagine you are on a space mission and you are 6 AU's from the Sun and you use a light sensor to measure the brightness of the Sun. The amount of sunlight received per square centimeter would be different by what factor compared to the same measurement on Earth at AU

Answers

Answer:

36 times less.

Explanation:

The distance from you to the sun is 6AU's, and from the sun to the earth is 1 AU.

Therefore,

At Earth sunlight received per unit cm² is:

[tex]I_{earth} = \dfrac{I_o}{4 \pi \times (1)^2}[/tex]

[tex]I_{earth} = \dfrac{I_o}{4 \pi}[/tex]

[tex]I_{me} =\dfrac{I}{4 \pi (6)^2}[/tex]

[tex]I_{me} = \dfrac{I_o}{36(4 \pi)}[/tex]

Thus, [tex]I_{earth} = 36 \times I_{me}[/tex]

Thus, the right answer is 36 times less.


Find the speed of a wave with a frequency of 18 Hz and a wavelength of 6 meters. Show work. WILL MARK BRAINLIEST IF CORRECT

Answers

Answer:

so i would say 11.4 i dont have work only this link

Explanation:

https://flexbooks.ck12.org/cbook/ck-12-physics-flexbook-2.0/section/11.4/primary/lesson/wave-speed-ms-ps

Two point charges, initially 3 cm apart, are moved to a distance of 1 cm apart. By what factor does the resulting electric force between them change?
A. 3
B. 1/9
C. 1/3
D. 9

Answers

The answer is B (1/9).

describe briefly how you can a body​

Answers

Answer:

what

you need to elaborate

Answer: Can you please write question clearly.

Explanation:

Do anyone answer this question​

Answers

Answer:

B) 10^-2 cm/s

in term of meter. it is 10^-4 m/s

Explanation:

Some thermometers contain alcohol. Alcohol is used in thermometers because


A. is soluble in water

B. is a clear gas when it evaporates

C. expands and contracts easily

D. has a high density

Answers

Answer:

Explanation:

Option C is the correct answer

Some thermometers contain alcohol. Alcohol is used in thermometers because expands and contracts easily. The correct option is C.

What is thermometer?

Thermometer is the temperature measuring device which consists of a liquid in the bulb which expands as the temperature is increased.

The liquid metal used in the thermometer must have the property to respond on the hotness and coldness rapidly.

In place of mercury, some thermometers use alcohol because an alcohol has a very low freezing point as compared to the Mercury.

Thus, the correct option is C.

Learn more about thermometers.

https://brainly.com/question/24189042

#SPJ2

Some thermometers contain alcohol. Alcohol is used in thermometers because expands and contracts easily.

Student 1 and student 2 talk about the speed of the truck

Answers

Answer:

Explanation:

any more explanation?

A 2:2 kg toy train is con ned to roll along a straight, frictionless track parallel to the x-axis. The train starts at the origin moving at a speed of 1:6m=s in the +x direction, and continues until it reaches a position 7:5m down the track from where it started. During its journey, it experiences a force pointing in the same direction as the vector 0:6 +0:8 , with magnitude initially 2:8N and decreasing linearly with its x-position to 0N when the train has finished its journey.

Required:
a. Calculate the work done by this force over the entire journey of the train.
b. Find the speed of the train at the end of its journey.

Answers

Answer:

a) 10.51 J

b) 3.48 m/s

Explanation:

Given data :

mass of train ( M ) = 2.2 kg

Given initial velocity ( u ) = 1.6 m/s

a) calculating work done by the force over the journey of the train

F = mx + b  ------ ( 1 )

m = slope  = ( Δ f / Δ x ) = 2.8 / -7.5 = - 0.373 N/m

x = distance travelled on the x axis by the train = 7.5 m

F = force experienced by the train = 2.8 N

x = 0

∴ b = 2.8

hence equation 1 can be written as

F = ( -0.373) x + 2.8   ----- ( 2 )

hence to determine the work done by the force

W   = [tex]\int\limits^7_0 { ( -0.373) x + 2.8 )} \, dx[/tex]     Note:  the limits are actually 7.5 and 0

∴ W ( work done ) = -10.49 + 21 = 10.51 J

b) calculate the speed of the train at the end of its journey

we will apply the work energy theorem

W = 1/2 m*v^2  -  1/2 m*u^2

∴ V^2 = 2 / M ( W + 1/2 M*u^2 )  ( input values into equation )

 V^2 = 12.11

hence V = 3.48 m/s

The model shows the star Wolf 359, the sun, and Star X. It takes 7.8 years for light produced on Wolf 359 to reach the sun.

If Star X is 50 times as far from the sun as Wolf 359 is, how far is Star X from the sun, to the nearest light-year?

Answers

Answer:

390 light-years

Explanation:

50 x 7.8 =390

Which two options describe physical properties of matter

Answers

It’s at reverse I can’t see the picture very well

ILL GIVE BRAINLIST PLS In which circuit does charge reverse direction many times per second?
A. A DC circuit
B. A combined circuit
C. A parallel circuit D. An AC circuit

Answers

Answer: D. An AC circuit

Explanation:

I took it on a test and it was correct ; )

A circular cylinder has a diameter of 3.0 cm and a mass of 25 g. It floats in water with its long axis perpendicular to the water's surface. It is pushed down into the water by a small distance and released; it then bobs up and down. Part A What is the oscillation frequency

Answers

Answer:

   f = 5.3 Hz

Explanation:

To solve this problem, let's find the equation that describes the process, using Newton's second law

        ∑ F = ma

where the acceleration is

         a = [tex]\frac{d^2 y}{dt^2 }[/tex]

        B- W = m \frac{d^2 y}{dt^2 }

To solve this problem we create a change in the reference system, we place the zero at the equilibrium point

           B = W

In this frame of reference, the variable y'  when it is oscillating is positive and negative, therefore Newton's equation remains

         B’= m [tex]\frac{d^2 y'}{dt^2 }[/tex]

           

the thrust is given by the Archimedes relation

         B = ρ_liquid g V_liquid

     

the volume is

        V = π r² y'

     

we substitute

          - ρ_liquid g π r² y’ = m \frac{d^2 y'}{dt^2 }

          [tex]\frac{d^2 y'}{dt^2} + \rho_liquid \ g \ \pi r^2/m ) y' \ =0[/tex]

this differential equation has a solution of type

         y = A cos (wt + Ф)

where

         w² = ρ_liquid g π r² /m

angular velocity and frequency are related

         w = 2π f

         

we substitute

          4π² f² = ρ_liquid g π r² / m

          f = [tex]\frac{1}{2\pi } \ \sqrt{ \frac{ \rho_{liquid} \ \pi r^2 \ g}{m } }[/tex]

calculate

         f = [tex]\frac{1}{2 \pi } \sqrt{ \frac{ 1000 \ \pi \ 0.03^2 \ 9.8 }{0.025} }[/tex]

         f = 5.3 Hz

What is a negative effect of increased carbon dioxide within the carbon cycle?

Answers

Answer:

Carbon dioxide controls the amount of water vapor in the atmosphere and thus the size of the greenhouse effect. Rising carbon dioxide concentrations are already causing the planet to heat up

Explanation:

Hope it helps! Correct me if I am wrong

Im sure about my answer

Scientists are constantly exploring the universe, looking for new planets that support life similar to the life on
Earth. A new planet that supports life would have all of the following characteristics except -
A. a gaseous atmosphere.
B. an orbiting moon.
C. liquid water.
D. protection from radiation.

Answers

The answer would be “B” because humans would need water, protection from radiation so we don’t melt or burn to death lol, and a gaseous atmosphere because we would need oxygen.

A new planet that supports life would have all the following characteristics except an orbiting moon. Hence, option B is correct.

What is a Planet?

An enormous, spherical celestial object known as a planet is neither a star nor its remains. The nebular hypothesis, which states how an interstellar cloud falls out of a nebula to produce a young protostar encircled by a protoplanetary disk, is now the best explanation for planet formation.

By gradually accumulating material under the influence of gravity, or accretion, planets develop in this disk.

The rocky planets Mercury, Venus, Earth, and Mars, as well as the giant planets Jupiter, Saturn, Uranus, and Neptune, make up the Solar System's minimum number of eight planets. These planets all revolve around axes that are inclined relative to their respective polar axes.

To know more about Planet:

https://brainly.com/question/14581221

#SPJ2

A geologist notices that a river is eroding its valley at a constant rate. Knowing the height of the valley walls, how could the geologist figure out when the river started carving the valley?
A.
Count growth rings of trees growing on the valley floor.
B.
Divide the height of the valley walls by the rate of erosion.
C.
Fill up the river valley with rocks, and time how long it takes the rocks to wash out.
D.
Sit and observe the river for a few hours until the valley walls double in height.

Answers

Answer:

B.

Divide the height of the valley walls by the rate of erosion.

Explanation:

There is a relationship between the rate of erosion and the hieght at which it is eroded according to Newton's law of motion. In the case of the scenario above, the best way to determine the time the river started carving the valley would be the division of the height of the valley walls by the rate of erosion.

You want to find out how many atoms of the isotope 65Cu are in a small sample of material. You bombard the sample with neutrons to ensure that on the order of 1% of these copper nuclei absorb a neutron. After activation, you turn off the neutron flux and then use a highly efficient detector to monitor the gamma radiation that comes out of the sample. Assume half of the 66Cu nuclei emit a 1.04-MeV gamma ray in their decay. (The other half of the activated nuclei decay directly to the ground state of 66Ni.) (Enter your answer using one of the following formats: 1.2e-3 for 0.0012 and 1.20e 2 for 120.)

Required:
a. If after 10 min (two half-lives) you have detected 10000 MeV of photon energy at 1.04 MeV, approximately how many 65Cu atoms are in the sample?
b. Assume the sample contains natural copper. Refer to the isotopic abundances listed in your text (Chemical and Nuclear Information for Selected Isotopes) and estimate the total mass of copper in the sample.

Answers

Answer:

a) number of copper atoms 65 (⁶⁵Cu)  is 7.692 10⁶ atoms

b) m_total Cu = 1.585 10⁹ u = 2.632 10⁻¹⁸ kg

Explanation:

a) For this exercise let's start by using the radioactive decay ratio

           N = N₀  [tex]e^{- \lambda t}[/tex]o e - lambda t

The half-life time is defined as the time it takes for half of the radioactive (activated) atoms to decay, therefore after two half-lives there are

            N = ½ (½ N₀) = ¼ N₀

            N₀ = 4 N

in each decay a photon is emitted so we can use a direct rule of proportions. If an atom emits a photon it has Eo = 1,04 Mev, how many photons it has energy E = 10,000 MeV

          # _atoms = 1 atom (photon) (E / Eo)

          # _atoms = 1 10000 / 1.04

          # _atoms = 9615,4 atoms

          N₀ = 4 #_atoms

          N₀ = 4 9615,4

          N₀=  38461.6  atoms

in the exercise indicates that half of the atoms decay in this way and the other half decays directly to the base state of Zinc, so the total number of activated atoms

          N_activated = 2 # _atoms

          N_activated = 2 38461.6

          N_activated = 76923.2

also indicates that 1% = 0.01 of the nuclei is activated by neutron bombardment

          N_activated = 0.01 N_total

          N_total = N_activated / 0.01

          N_total = 76923.2 / 100

          N_total = 7.692 10⁶ atoms

so the number of copper atoms 65 (⁶⁵Cu)  is 7.692 10⁶

b) the natural abundance of copper is

  ⁶³Cu     69.17%

  ⁶⁵Cu    30.83%

Let's use a direct proportion rule. If there are 7.692 10⁶  ⁶⁵Cu that represents 30.83, how much ⁶³Cu is there that represents 69.17%

                # _63Cu = 69.17%  (7.692 10⁶    / 30.83%)

                # _63Cu = 17.258 10⁶  atom  ⁶³Cu

the total amount of comatose is

              #_total Cu = #_ 65Cu + # _63Cu

              #_total Cu = (7.692 + 17.258) 10⁶

              #_total Cu = 24.95 10⁶

the atomic mass of copper is m_Cu = 63.546 u

          m_total = #_totalCu m_Cu

          m_total = 24.95 10⁶ 63,546 u

          m_total = 1.585 10⁹ u

let's reduce to kg

           m_total Cu = 1.585 10⁹ u (1,66054 10⁻²⁷ kg / 1 u)

           m_total Cu = 2.632 10⁻¹⁸ kg

10 POINTS!! SPACE QUESTION!!

Answers

The First one trust...

Answer: A (first option)

Explanation: In general, the surface temperatures decreases with increasing distance from the sun. Any warm object in space loses heat via infrared radiation; also visible radiation if it is hot enough. The hotter is the object, the faster it loses heat. Consequently any object warmed by the Sun stays at equilibrium temperature - it warms up until the radiative heat loss equals to the heat received, and cannot get any warmer beyond that.

A thin uniform rod (length = 1.2 m, mass = 2.0 kg) is pivoted about a horizontal, frictionless pin through one end of the rod. (The moment of inertia of the rod about this axis is ML2/3.) The rod is released when it makes an angle of 37° with the horizontal. What is the angular acceleration of the rod at the instant it is released (in rad/s^2)?

Answers

Answer:

A: 9.8 rad/s2

B: 7.4 rad/s2

C: 8.4 rad/s2

D: 5.9 rad/s2

E: 6.5 rad/s2

I think the answer is A 9.8rad/s2

has a man he has married many women but has never been married before who is he​

Answers

Answer:

Explanation:

The answer is a priest or a moulana

Priest I believe gl either way

I am b o r e d, I am very very b o r e d!
I'm b o r e d with Lazarbeam Quarantine edition
episode 2352 because apparently the quarantining never ends :(

Answers

oh , not sure what that is but
Ok try to do something funn ig

Q10. Refer to the Condon table to answer question
Second letter
UUU
UCU
UGU
OUC
UCO
UAC
Leu
UAA Btop UOA Stop
UCG UAG Stop UGOT
CU
CCU
CAU CGU
CUC
ССС
САС
Leu
CUA
CGC
Pro
CCA
CAA COA
CUG
CCG
AD
RoecoDoo Do
Asn
AUU
ACU
AUC File
ACC
AUA АСА
AUG Met ACO
AAU
ААС
ΑΛΛΑ
LANG
AGU
Ser
AGC
Thr
Jue AGA
Jara
AGG
sp
GU
QUC
GUA
GUG
GCU GAU
GCC
Ala
GAC
GCA GAA
OCG GAG
GOC
GGA
Jolu 900
Write the mRNA copy of this DNA CCG GA
GCT (original) | Imk]
Use the Condon table above to list all the amin​

Answers

Answer:

so you have a question

Explanation:

either way, have a nice day

A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 2.00 s for the boat to travel from its highest point to its lowest, a total distance of 0.600 m . The fisherman sees that the wave crests are spaced a horizontal distance of 6.40 m apart.

Required:
a. How fast are the waves traveling?
b. What is the amplitude of each wave?
c. If the total vertical distance traveled by the boat were 0.30 m but the other data remained the same, how would the answers to parts (a) and (b) be affected?

Answers

Answer:

a. Speed = 1.6 m/s

b. Amplitude = 0.3 m

c. Speed = 1.6 m/s

Amplitude = 0.15 m

Explanation:

a.

The frequency of the wave must be equal to the reciprocal of the time taken by the boat to move from the highest point to the highest point again. This time will be twice the value of the time taken to travel from the highest point to the lowest point:

frequency = [tex]\frac{1}{2(2\ s)}[/tex] = 0.25 Hz

The wavelength of the wave is the distance between consecutive crests of wave. Therefore,

Wavelength = 6.4 m

Now, the speed of the wave is given as:

Speed = (Frequency)(Wavelength)

Speed = (0.25 Hz)(6.4 m)

Speed = 1.6 m/s

b.

Amplitude is the distance between the mean position of the wave and the extreme position. Hence, it will be half the distance between the highest and lowest point:

Amplitude = (0.5)(0.6 m)

Amplitude = 0.3 m

c.

frequency = [tex]\frac{1}{2(2\ s)}[/tex] = 0.25 Hz

Speed = (Frequency)(Wavelength)

Speed = (0.25 Hz)(6.4 m)

Speed = 1.6 m/s

Amplitude = (0.5)(0.3 m)

Amplitude = 0.15 m

NASA’s Tracking and Data Relay Satellite (TDRS) System constellation resides at geosynchronous orbit (35,000km) altitude. If a technician at the Goddard Spaceflight Center in Maryland initiates a transmission to the Johnson Spaceflight Center in Houston over TDRS, how long will it be until JSC detects the transmission (one-way latency)? You may assume there is negligible processing delay on the satellite, and that c = 3x108 m/sec.

Answers

Answer:

35,000 km = 35,000,000 m = 3.5 E107 m

t = S / v = 3.5 * 10E7 / 3.0 E10E8 = .117 sec

A sound wave travels with a velocity of 1.5 m/s and has a frequency of 500 Hz. What is its wavelength?

Answers

velocity, wavelength, and frequency.

Wave velocity (v) is how fast a wave propagates in a given medium. Its unit is meter per second. Check the speed calculator for more information about speed and velocity.

Wavelength (λ) is the distance over which the shape of a wave repeats. It depends on the medium in which a wave travels. It is measured in meters.

Frequency (f) of a wave refers to how many times (per a given time duration) the particles of a medium vibrate when the wave passes through it. The unit of frequency is Hertz or 1/second.
Other Questions
Can somebody please help me? The bar graph shows a companys income and expenses over the last 5 years. Which statement is supported by the information in the graph?A) The income in Year 5 was twice the income in Year 1B) The combined expenses in Years 3 and 4 were more than the combined income in Years 3 and 4C) Expenses have increased each year over the last 5 yearsD) The combined income in Years 1, 2, and 3 was equal to the combined expenses in Years 1, 2, and 3 Please answer correctly !!!! Will mark Brianliest !!!!!!!!!!!!!! some questions to ask to find history of our village how personality affect on performance of company I just need help graphing! (4x - 20) I really need help on this The reciprocal rule of division method isA.Multiply the divisor by the reciprocal of the dividendB. Multiply the dividend by the reciprocal of the divisorC. Both A and BD. None of these You roll a dice. It is an even number. What is P(6/Even)?A) 1/3B) 1/6C) 5/6 Megan is the manager of a computer shop she organises a sale with 18% off all tables Megan changes the price of own table from 389 to 330.98 has Megan changed the price probably What are some other ideas that you think Japan could use to help with their overcrowdingproblem? (In the ring of fire) plz help im lazy plzzzzzzzzzzz Which letter in the image shows the alluvial fan Why should I join a health science Academy A company makes steel rods shaped like cylinders. Each rod has a radius of 2 centimeters and a height of 60 centimeters. If the company used 54,259.2 cm3 of steel, how many rods did it make? Use 3.14 do not round your answer +Help me plz Dorothea Dix was an educator who first saw the connection betweenBeing sent to prison and mental illnessBeing sent to prison and physical ailmentsThe need to educate inmates in prisonAll of the above Given thatx= 9.5 m and= 20, work out AC rounded to 3 SF Two of Interpret Inc's products, QI and VH, emerge from a joint process. Product QI has been allocated $15,300 of the total joint costs of $36,000. A total of 2,200 units of product QI are produced from the joint process. Product QI can be sold at the split-off point for $10 per unit, or it can be processed further for an additional total cost of $10,200 and then sold for $12 per unit. If product QI is processed further and sold, what would be the financial advantage (disadvantage) for the company compared with sale in its unprocessed form directly after the split-off point Question 11 (1 point)A cell containing 28 chromosomes undergoes mitosis and cell division. How many chromosomes will each of the resulting daughter cellscontain?a28b756d14 a que familia pertenece las lenguas europeas