Fortunately, even those who have the most severe instances of GBS eventually recover. Some people will still have some weakness when they recover.
The peripheral nervous system, or the network of nerves outside the brain and spinal cord, is mistakenly attacked by the body's immune system in the rare neurological illness known as Guillain-Barré syndrome (GBS). A person with GBS may experience anything from a very mild case with transient weakness to a nearly fatal paralysis that prevents them from breathing on their own.
Anyone can develop Guillain-Barré syndrome. Both sexes are equally prone to the illness, which can affect anyone at any age (although it tends to affect adults and elderly persons more frequently). One in 100,000 people are thought to be affected with GBS each year.
Learn more about system here-
https://brainly.com/question/11938296
#SPJ4
A 1070-kg car starts from rest at the bottom of a drive way and has a speed of 3.00 m/s at a point where the drive way has risen a vertical height of 0.600 m. Friction and the drive force produced by the engine are the only two nonconservative forces present. Friction does -2870 J of work. How much work does the engine do
In the question the only nonconservative forces in play are friction and the engine's motive force. Work done by friction is -2870 J. The work done by the engine is 1285 J.
The work done by an engine can be determined by the change in kinetic energy of the car. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy. The initial kinetic energy of the car is 0 J (at rest) and the final kinetic energy of the car is 1/2mv^2, where m is the mass of the car and v is its final speed. The work done by the engine is equal to the change in kinetic energy of the car, which is the final kinetic energy minus the initial kinetic energy.Work_engine = change in kinetic energy = (1/2)mv^2 - 0
Work_engine = (1/2)(1070)(3)^2 = 4155 J. The work done by friction is -2870 J, which is negative because it is opposing the motion of the car. The net work done by nonconservative forces is the sum of the work done by the engine and the work done by friction. Net work = Work_engine + Work_friction = 4155 J + (-2870 J) = 1285 J. Therefore, the work done by the engine is 1285 J.
Learn more about work done here:
https://brainly.com/question/2750803
#SPJ4
Is there any difference between antimatter, dark matter, dark energy, and degenerate matter?
Yes. Antimatter, dark matter, dark energy, and degenerate matter are all distinct entities that actually exist in our universe, despite their names sounding hazy and almost fictitious.
Is there a distinction between dark energy and dark matter?Dark energy and dark matter are not the same, despite the name. The only difference is that both are invisible. Galaxies are pushed apart by dark energy, while dark matter holds them together.
Which of the three kinds of dark matter exists?Candidates for dark matter can be either baryonic or non-baryonic, or a combination of the two. Most of the time, the non-baryonic forms fall into two categories: Hot Dark Matter (HDM) and Cold Dark Matter (CDM).
To learn more about Dark energy here:
https://brainly.com/question/29801644
#SPJ1
replace the force system acting on the post by a resultant force and couple moment at point o
By replacing the force system acting on the post with a resultant force and a couple of moments at point o we get total momentum of 1478.85 ft-lb.
As per the figure we have 3 forces: At the top 300lb left side 150lnb and at the middle 200lb.
first, we have to break down the forces into x and y components.
Now calculating each force separately:
∑Fₓ=300lb+cos 30°-150×4/3+200
=259.81-120+200
∑Fₓ=339.81lb.
Now, calculate the sum of y components.
∑Fy=300 sin 30°+150×3/5
∑Fy=300 sin 30°+90
∑Fy=240lb
Now we have to x and y components by these values we can find the actual force.
|F|=√Fx²+Fy²
|F|=√(339.81)²+(240)² α=tan⁻¹(∑Fₓ/∑Fy)
|F|=√115470.83+57600 α=tan⁻¹(339.81/240)
|F|=√173070 α=35.23°
|F|=416.02 and 35.23°
the sum of moments at O
∑Mo=-Fx₃×2+Fx₂×4-Fx₁×6
∑Mo=-200(2)+4/5 150*4-3000cos30°(6)
∑Mo=-400+480-277.65
=1478.85ftlb
∑Mo=1478.85ftlb
To know more about resultant force:
https://brainly.com/question/25239010
#SPJ4
two students are sitting next to each other on chairs with wheels. They push each other and separate in opposite directions. The student with a mass of 48 kg moves to the left with a velocity of 1.8 m/s. How fast and in what direction does the other student with a 59-kg mass move?
The student with a 59-kg mass moves to the right with a velocity of 1.46 m/s.
What is law of conservation of momentum?According to the law of conservation of momentum, The overall momentum of two or more bodies acting on one another in an isolated system stays constant unless an external force is introduced.
The student with a mass of 48 kg moves to the left with a velocity of 1.8 m/s.
Let the student with a mass of 59 kg moves to the left with a velocity of v m/s.
As no external force applied,
48 kg × 1.8 m/s + 59 kg × v = 0
v = - 1.8 × (48/59) m/s
= - 1.46 m/s.
Hence, the velocity of the second bay is 1.46 m/s in right direct.
Learn more about momentum here:
https://brainly.com/question/24030570
#SPJ1
20 points! I was thinking B.) Scatter plot but want to check.
A student collected data about the speed of an object over time.
Which type of graph should the student use to represent the data?
Responses
circle graph
scatterplot
histogram
bar graph
A 3.70 -uF capacitor that is initially uncharged is connected in series with a 6.20 -kohms resistor and an emf source with E=130V negligible internal resistance.
A) Just after the circuit is completed, what is the voltage drop across the capacitor?
B) Just after the circuit is completed, what is the voltage drop across the resistor?
C) Just after the circuit is completed, what is the charge on the capacitor?
D) Just after the circuit is completed, what is the current through the resistor?
E) A long time after the circuit is completed (after many time constants) what is the voltage drop across the capacitor?
F) A long time after the circuit is completed (after many time constants) what is the voltage drop across the resistor?
G) A long time after the circuit is completed (after many time constants) what is the charge on the capacitor?
H) A long time after the circuit is completed (after many time constants) what is the current through the resistor?
A long time after the circuit is completed (after many time constants), the voltage drop across the capacitor is 104.8V, the voltage drop across the resistor is 25.2V, the charge on the capacitor is -7.5μC, and the current through the resistor is 1.6mA.
A) Just after the circuit is completed, the voltage drop across the capacitor is 0V.
B) Just after the circuit is completed, the voltage drop across the resistor is 130V.
C) Just after the circuit is completed, the charge on the capacitor is 0C.
D) Just after the circuit is completed, the current through the resistor is 20.8mA.
E) A long time after the circuit is completed (after many time constants), the voltage drop across the capacitor is 104.8V.
F) A long time after the circuit is completed (after many time constants), the voltage drop across the resistor is 25.2V.
G) A long time after the circuit is completed (after many time constants), the charge on the capacitor is -7.5μC.
H) A long time after the circuit is completed (after many time constants), the current through the resistor is 1.6mA
Just after the circuit is completed, the voltage drop across the capacitor is 0V, the voltage drop across the resistor is 130V, the charge on the capacitor is 0C, and the current through the resistor is 20.8mA. A long time after the circuit is completed (after many time constants), the voltage drop across the capacitor is 104.8V, the voltage drop across the resistor is 25.2V, the charge on the capacitor is -7.5μC, and the current through the resistor is 1.6mA.
learn more about current here
brainly.com/question/17120024
#SPJ4
A 5-ft3 rigid tank contains 5 lbm of water at 20 psia. Determine (a) the temperature, (b) the total enthalpy, and (c) the mass of each phase of water
After that, we will calculate the temperature, total enthalpy, and masses of each water phase using the steam table.
What are temps and what is its unit?Given the water's initial mass and pressure, we can determine whether it is superheated or saturated by utilizing a steam table. On a variety of scales, including the Fahrenheit and Celsius systems, temperature is a unit that is used to denote hotness or coolness.
Heat energy will logically go from a hotter (body with a higher temperature) to a colder (body with a lower temperature) according to temperature (one at a lower temperature).
A comparison of a substance's temperature to a set of hot and cold reference values can be used to determine its temperature. The letter "T" stands for "temperature," which is denoted by the SI unit of "°C."
The three scales that are most frequently used to measure temperature are the Celsius scale, the Fahrenheit scale, and the Kelvin scale.
To learn more about temperature refer to:
brainly.com/question/18367997
#SPJ4
Two springs have spring constants of 10.0 N/cm and 15.0 N/cm. Which spring is more difficult to stretch
The spring with the higher spring constant (15.0 N/cm) will be more difficult to stretch than the spring with the lower spring constant (10.0 N/cm).
This is because the spring constant is directly related to the amount of force required to stretch the spring. Therefore, the higher the spring constant, the more force that is required to stretch the spring.
The spring constant is a measure of how difficult it is to stretch or compress a spring. It is determined by the stiffness of the spring material, its shape and size, and how much the spring is compressed or stretched.
The higher the spring constant, the more force is required to stretch or compress the spring. The lower the spring constant, the less force is required to stretch or compress the spring.
Learn more about the spring:
https://brainly.com/question/1968517
#SPJ4
In the above situation, what is the net torque on wire 2 due to wire 1?
a. Up b. Down
c. Into the screen d. Out of the screen e. Zero
In the above situation the net torque on wire 2 due to wire 1 is Zero.
Which way is the force acting on the wire?Fleming's left-hand rule identifies the force's direction on a current-carrying wire when it is placed in a magnetic field. It always runs counter to how the magnetic field and electric current are moving.
Directional torque: what is it?Torque is a vector quantity by definition. The direction is determined as part of the torque computation. The direction is parallel to both the force and the radius from the axis. It is customary to choose it along the rotational axis in the right-hand rule direction.
When rotating clockwise, is torque negative?a force that is applied that results in a positive counterclockwise torque A negative torque rotates an object in a clockwise direction.
To know more about torque visit:
https://brainly.com/question/20691242
#SPJ4
01) When operating a simple machine an effort of 60N is used to lift the load of 240 N. Find the mechanical advantage.
02) When operating the same machine the effort arm moves 4m while load moves 1m. Find velocity ratio
03) In the same machine find work input.
04) In the same machine find work output.
05) Find the efficiency of this simple machine.
Useless answers will be reported!
Answer:
1 MA= load/effort
MA= 240/60
MA=4
2.VR=Distance moved by effort/ Distance moved by Load
VR=4/1
= 4
5. Efficiency= MA/VR
4/4*100/1
=100%
A worker uses a pulley (Links to an external site.) system to raise a 225 N carton 16.5 m. A force of 129 N is exerted and the rope is pulled 33.0 m. What is the IMA of the system
Answer: 1.74
Explanation: “How do you calculate the mechanical advantage of a block and tackle pulley?To calculate the mechanical advantage, we can either divide the weight of the object being lifted by the force required to lift it or we can divide the amount of rope we have to pull by the distance the object moves."If we use the rope method the mech advantage is 33.0/16.5 = 2 now if we use the forces MA = 225/129 =1.74 <==== this is not equal to '2' as we first found due to energy being lost to friction/deformation of rope etc. SO I would say the truemechanical advantage = 1.74 Efficiency = 1.74/2 = 87%
Please help! 50 points.
A student conducts an experiment to test how the temperature affects the amount of salt that can dissolve in water. In the experiment, she uses 150 milliliters of water in each trial and stirs for five minutes each time.
What is the dependent variable in this experiment?
the temperature of the water
the amount of water
the amount of salt
the time stirred
Answer:
i think its time stirred, double check. i hope it helped ;)
Explanation:
Why do we calculate torque?
Torque is one of the key ideas to comprehend in order to solve problems with rotational motion. Torque is the tendency of a force to produce or change rotational motion.
Why is torque calculation important?Torque is a measure of an engine's capacity to control a load and generate a certain level of power to turn the engine on its axis. which is an important part of an automobile engine's power-generating process. Per foot (ft) of rotation about a single point, the force is expressed in pounds (lb).
Why does the torque exist?The force that can cause an object to revolve around an axis is measured in torque. In linear kinematics, force causes an item to accelerate, and torque causes an object to produces the angular acceleration of an object. A vector quantity is a torque.
To know more about torque visit:-
https://brainly.com/question/6855614
#SPJ4
What does an increases in concentration do to a material?
Answer:
it will increase the frequency of collisions between the two reactants
Explanation:
mark brainliest?
The upper and lower fixed points of a mercury thermometer corresponds to 9.00mV and 16.50mV on the thermocouple thermometer. The temperature of a warm iron giving a reading of 11.21mV to the nearest whole number is.
To find the temperature of the warm iron, we first need to convert the reading on the thermocouple thermometer to a temperature value. To do this, we will use the formula:
Temperature = (Reading - Lower Fixed Point) / (Upper Fixed Point - Lower Fixed Point) * (Upper Temperature - Lower Temperature) + Lower Temperature
In this case, the lower fixed point is 9.00mV and the upper fixed point is 16.50mV. We also know that the lower temperature is 0°C (the freezing point of water) and the upper temperature is 100°C (the boiling point of water). So, we can plug in these values:
Temperature = (11.21mV - 9.00mV) / (16.50mV - 9.00mV) * (100°C - 0°C) + 0°C
Simplifying, we get:
Temperature = (2.21mV / 7.50mV) * 100°C
And further simplifying, we get:
Temperature = 0.2907 x 100°C
So, the temperature of the warm iron is approximately 29.07°C to the nearest whole number.
To learn more about temperature :-
https://brainly.com/question/14161300
How does the flux of light from an isotropic source depend on the distance r from the source?
A. r 2
B. r -2
C. r -1
D. r 1
E. r 1/2
F. none of the above
The flux of light from an isotropic source depend on the distance r from the source by r-2.
What is isotropic source?
An isotropic source is a source of radiation or sound that emits energy in all directions equally. This type of source is usually assumed to have uniform power density in all directions, making it a simplifying assumption when analyzing a system. Examples include a point source in free space, such as a light bulb, or a sound source in a room.
The flux of light from an isotropic source (a source that radiates uniformly in all directions) decreases as the inverse square of the distance from the source. This means that the flux of light from the source decreases according to the equation F = 1/r2, where F is the flux of light, and r is the distance from the source. Therefore, the flux of light from an isotropic source decreases with the distance r from the source according to the equation F = r-2.
To learn more about isotropic source
https://brainly.com/question/23543764
#SPJ4
A bicyclist maintains a constant velocity of
4. 0 m/s for a distance of 480 m. How long does it take the bicyclist to travel this distance?
A8s
B 120s C 476s D 1920s
The bicyclist will need to ride for a total time of 120 seconds in order to cover 480 meters of distance at a constant velocity of 4.0 meters per second.
In this scenario, we are provided with:
The distance of the ride is 480 meters.
The velocity is four meters per second
In order to calculate the time, we can use the following formula:
Time = Distance : Velocity
= 480 meters : 4.0 meters per second
= 120 seconds
Therefore, the amount of time a cyclist needs to travel would be 120 seconds.
To learn more about time, click here:
https://brainly.com/question/19555715
#SPJ4
What linear speed must an Earth satellite have to be in a circular orbit at an altitude of 204 km above Earth's surface
According to the question linear speed must an Earth satellite have to be in a circular orbit at an altitude of 204 km above Earth's surface is 30.682× [tex]10^{10}[/tex].
What does orbit mean?Astronomically speaking, an orbit is the curved path—typically elliptical—that a planet, satellite, comet, etc. takes when it revolves around another celestial body as a result of gravitation.
By Newton's second law
GMm/[tex]r^{2}[/tex] m[tex]v^{2}[/tex] /r.
Since the radius of Earth is 6.37 × [tex]10^{6}[/tex] m,
the orbit radius is r=(6.37×[tex]10^{6}[/tex] m+204×[tex]10^{3}[/tex] m)=1.3×[tex]10^{3}[/tex] m.
The solution for v is
v= [tex]\sqrt{\frac{GM}{r} }[/tex] = (6.67×[tex]10^{-11}[/tex]× 5.98×[tex]10^{24}[/tex]/1.3×[tex]10^{3}[/tex])^1/2
⇒ v= 30.682× [tex]10^{10}[/tex]
To know more about orbit visit:
brainly.com/question/17772283
#SPJ4
A weight of 10 N hangs motionless from a spring. The spring is stretched 0.286 m from its original length. What is the force constant for the spring?
a-2.8 N/m
b-22 N/m
c-35 N/m
d-43 N/m
Answer:
C. -35N/m
Explanation:
Using Hooke's Law, we know that the elastic constant of a spring can be found with this formula:
[tex]F=-kx[/tex]
where:
[tex]F[/tex] is the force ( in Newtons)
[tex]k[/tex] is the constant ( in Newtons per meter)
[tex]x[/tex] is the extension ( in meters)
thus, by rearranging the formula we can get:
[tex]k=-\frac{F}{x}[/tex]
[tex]k = -\frac{10}{0.286}[/tex]
[tex]k=-34.96503N/m[/tex]
Rounding off the answer, we get -35N/m
Dina is observing a sample of copper metal after it was removed from a flame. She noticed that the temperature decreased. What conclusions could she draw from this observation?
a-The average kinetic energy decreased.
b-The average kinetic energy remained the same.
c-The motion of the particles increased.
d-The motion of the particles stayed the same.
Answer:
A. The average kinetic energy decreased.
Explanation:
When an object gains heat, which is a form of energy, the atoms within the object would in turn gain energy in the form of kinetic energy. Similarly, as the temperature of an object decreases, in other words losing heat energy, the atoms within the object would lose kinetic energy as a result.
The sum of kinetic energy and potential energy
of the particles in a material is blank
The sum of kinetic energy and potential energy of the particles in a material is known as mechanical energy.
What is Kinetic energy?The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
What is potential energy?Due to its position, an object has the ability to store energy. For instance, when a demolition machine's heavy ball is held in an elevated position, it is storing energy. Potential energy is the name for this positional energy that has been stored. Similar to how a drawn bow can store energy due to its posture, There is no energy in the bow while it is in its normal position, or when not drawn. The bow can yet store energy when its position is changed from its normal equilibrium position because of its position. Potential energy is the name for this positional energy that has been stored. Potential energy is the energy of position that a thing has stored inside it.
To know more about Kinetic energy, check out:
https://brainly.com/question/8101588
#SPJ1
A baseball bat strikes a ball resting on a tee with a force with a magnitude of 2. 0x10^4 newtons. If the bat stays in contact with the ball for a distance of 5. 0x10^-3 meter, what kinetic energy will the ball acquire from the bat?
The kinetic energy will the ball acquire from the bat is 1.0x10^1 joules or 100 joules. This calculation is based on the equation Energy = Force x Distance, which is a fundamental equation of physics.
The kinetic energy of the ball is equal to the work done by the bat on the ball. The work done by the bat on the ball is equal to the force applied by the bat multiplied by the distance the bat stays in contact with the ball. Therefore, the kinetic energy of the ball would be equal to 2.0x10^4 newtons multiplied by 5.0x10^-3 meters, which is equal to 1.0x10^1 joules or 100 joules.
This calculation is based on the equation of Energy which is Force x Distance. Additionally, this equation can be rearranged to solve for any of the variables, depending on what is known and what needs to be calculated. In this case, the known variables were the force applied by the bat and the distance the bat stayed in contact with the ball, and the variable that needed to be calculated as the kinetic energy of the ball.
To know more about kinetic energy refer to the link brainly.com/question/26472013
#SPJ4
CAN SOMEONE PLEASE ANSWER THESE 4 QUESTIONS I WILL NEED IT IN A FEW HOURS , YOU WILL GET BRAINLIEST!!
1.) Compare reflection and refraction. How are they similar and how are they different?
2.) In your own words, describe how ray diagrams can be used to describe if light rays are being reflected or refracted.
3.) What is the formula for the Law of Reflection? Define the variables and explain what it tells us about the motion of light.
4.) What is the formula for Snell's? Define the variables and explain what it tells us about the motion of light.
Answer:
1.)Reflection is the act of light reflecting back when it hits a medium on a plane. Refraction is the process by which light shifts its path as it travels through a material, causing the light to bend. Thus, this is the key difference between reflection and refraction. This phenomenon usually occurs in mirrors.
2.)ray diagrams are a visual representation of the propagation of light. They can help us to understand and visualise multiple situations, such as light being reflected off of a mirror or changing its direction while moving through a lens.
3.)Reflection: The process of sending back the light rays which fall on polished surface is called reflection of light.
Laws of reflection:
(i) The angle of reflection is always equal to the angle of incidence.
(ii) The incident rays, reflected rays and the normal, all lie in the same plane.
4.)Snell’s law formula is expressed as: μ= sin i/sin r
, where i is the angle of refraction, r is the angle of refraction and μ is known as the refractive index of the second medium with respect to the first medium.
What is the intensity of 60 dB sound?
The intensity of 60 dB sound is 10⁻⁶ W/m².
A common conversation between two persons seated at a distance of around one meter (3 14 feet) is as loud as 60 dB. It is equivalent to the typical noise level in a restaurant or office.
The decibel scale is a logarithmic one rather than a linear one. Accordingly, 10 dB denotes a sound that is 10 times louder than 0 dB, which represents no sound at all. Now, a sound at 20 decibels is 100 times louder than one at 0 decibels. And so on until a sound that is 100 decibels is 1 billion times louder than total silence (0 decibels).
A sound at 60 dB is therefore 100 times louder than a sound at 40 decibels and 1000 times louder than a sound at 30 decibels, while being 10 times louder than a sound at 50 decibels.
The formula for sound volume is L = log(I/I₀), or (I/I₀) = 10^L.
Given that L = 60dB = 6bel and that we know that I₀ = 10⁻¹² W/m²,
I/I₀ = 10⁶.
or I = 10⁻¹² × 10⁶ = 10⁻⁶ W/m²
To learn more about intensity of sound from given link
https://brainly.com/question/26861471
#SPJ4
Write a complete scientific explanation to account for why the heavier ball caused more flour to spread out
When a ball moves with faster velocity, then a greater impulse force is Imparted that causes more flour to spread out.
The momentum of a system remains constant unless the system is acted on by an external force in which case the acceleration of center of mass satisfies. The force on a system of particles is the external force because the internal force is zero.
The external force is equal to the change in momentum of the system and is proportional to the acceleration of the center of mass. For a fixed choice of system, if there are no external forces acting on the system then the momentum of the system is constant is constant.
The external force may be zero in one direction but not others. The component of the system momentum is constant in the direction that the external force is zero. The component of system momentum is not constant in a direction in which external force is not zero.
To know more about impulse here
https://brainly.com/question/15274490
#SPJ4
A Shuttle astronaut is sent to repair a defective relay in a 600. 00- kg satellite that is traveling in space at 17 00. 0 m/s * a * w * a * y Suppose the astronaut and his Manned Maneuvering Unit ( MMU) have a mass of 400. 00 kg and travel at 17 010. 0 m/s toward the satelliteWhat is the combined velocity when the astronaut grabs hold of the satellite?
A Shuttle astronaut is sent to repair a defective relay in a 600. 00- kg satellite that is traveling in space. The combined velocity when the astronaut grabs hold of the satellite is 17,004.4 m/s.
The combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is the relative velocity between the two objects. The relative velocity can be calculated using the principle of conservation of momentum. The principle states that the total momentum of an isolated system remains constant if no external forces act on it.
The initial momentum of the satellite is
= (600.00 kg) * (17,000.0 m/s)
= 10,200,000 kg*m/s
The initial momentum of the astronaut and the MMU is
= (400.00 kg) * (17,010.0 m/s)
= 6,804,400 kg*m/s
The final momentum of the combined system is
= (600.00 kg + 400.00 kg) * v,
where v is the final velocity of the combined system.
The conservation of momentum equation:
=> initial momentum = final momentum
= 10,200,000 kgm/s + 6,804,400 kgm/s
= (1000 kg) * v
= v
= (10,200,000 + 6,804,400) / 1000
= v
= 17,004.4 m/s
So, the combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is 17,004.4 m/s.
It's important to note that the relative velocity is the same in both directions, this is a vector quantity and direction is important.
To know more about velocity please refer: https://brainly.com/question/18084516
#SPJ4
What is the equation for torque used for lever arm and F for force?
The required equation for torque used for lever arm r and F for force is given as τ = |r| |F| sinθ.
A simple way to calculate the magnitude of the torque is to first determine the lever arm and then multiply by the times of applied force.
The lever arm is described as the perpendicular distance from axis of rotation to the line of action of force.
The equation used to calculate torque is , τ = r × F = |r| |F| sinθ
where,
r is the magnitude of lever arm
F is the magnitude of force vector
θ is the angle between lever arm and force vectors
To know more about torque:
https://brainly.com/question/29271618
#SPJ4
When charging by induction using grounding, if a negative rod is used, the object will acquire a ______ charge
When a positively charged rod becomes grounded it becomes neutral. The electrons come from the ground to your hand, then from your hand to the rod making the rod become neutral.
What is happening when a negatively charged rod becomes grounded?Both of the charged objects receive the same kind of charge when charging through conduction. Both things acquire a negative charge when a negative object is used to charge a neutral object.
The neutral sphere needs electrons from the negatively charged rod in order to become negative. 3. To demonstrate how charging by contact works, we'll first look at the scenario of charging a neutral needle electroscope with a negatively charged metal spherical.
Understanding the process necessitates an understanding of how like charges resist one another and have a strong desire to spread out as widely as possible in order to lessen their repulsions. The extra electrons in a negatively charged metal sphere repel one another and move as far apart from one another as possible.
To learn more about negative rod refer to:
https://brainly.com/question/28005383
#SPJ1
When charging by induction using grounding, if a negative rod is used, the object will acquire a positive charge.
What is charging by induction?A charging technique called induction charging involves charging a thing without actually contacting it to another charged object. The charged particle is held close to an uncharged substance which is conductive also, that is grounded on a neutrally charged material during the charging by induction process.This method of charging involves using a charged object to help a neutral object become charged without actually touching the objects. The neutral or uncharged conductor, which is grounded on a neutrally charged substance, is brought closer to the charged particle. If a charge is transferred between two objects, an oppositely polarized charge will emerge in the uncharged conducting material.
To know more about induction visit
https://brainly.com/question/10254645
#SPJ1
. Two spherical objects have masses of 8,000 kg and 5.0 kg. Their centers are separated by a distance
of 1.5 m. Find the gravitational attraction between them.
Two spherical objects have masses of 8000 KG and 1500 KG their centers are separated by a distance of 1.5 M, the gravitational attraction between them is 3.56 × 10⁻⁴N.
How does gravitational force work?The gravitational force, also known as gravity, pulls objects with mass in the same direction. We frequently think about the Earth's gravitational pull. This force is firmly holding your body in place. But every mass-bearing object attracts other mass-bearing objects toward it through gravity.
Using the formula of gravitational attraction
F = G× M₁M₂/d²
where G = 6.67 × 10⁻¹¹ Nm²Kg⁻²
M₁ = 8000Kg
M₂ = 1500 Kg
F = 6.67 × 10⁻¹¹ × 8000 × 1500 / (1.5)²
F = 3.56 × 10⁻⁴ N
The gravitational force of attraction between them is 3.56 × 10⁻⁴ N.
To know more about gravitational force visit:
https://brainly.com/question/19136576
#SPJ1
There is a bell on top of a tower that is 45 meters high. The bell has a mass of 20 kg. Calculate its potential energy.
Answer:
9000 Joules
Explanation:
Potential energy = mass x acceleration due to gravity x height
mass = 20kg
acceleration due to gravity = 10m/s2
height = 45 meters
20 x 10 x 45 = 9000 Joules