Answer:
No; According to the IUPAC , it should be
3-bromopentan-2-olA patient is prescribed 100mg/day of antibiotic for 2 weeks. The antibiotic is available in vials that contain 20mg/vial of the drug. How many vials are necessary for the entire treatment?
3) Tears are produced by the lacrimal glands located:
A) above the lateral canthus of each eye
B) below the medial canthus of each eye
C) below the lateral canthus of each eye
D) above the medial canthus of each eye
E) behind the nasal bones
A chemist measures the amount of bromine liquid produced during an experiment. She finds that 496g of bromine liquid is produced. Calculate the number of moles of bromine liquid produced.
Answer:
6.208 mol
Explanation:
Mass of Bromine Liquid = 496g
Number of moles = ?
Relationship between number of moles and mass is given as;
Number of moles = Mass / Molar mass
Molar mass of Bromine = 79.9g
Number of moles = 496 / 79.9 = 6.208 mol
Consider this reaction: 2HgO→2Hg+O2 .
Which of the following is the best explanation for why this reaction is a decomposition reaction?
Question 5 options:
Because it is balanced
Because oxygen is one of the reactants
Because there are two products
Because there is only one reactant
Answer:
becous thear are two products
Explanation:
The statement is "Because there is only on reactant."
What is reactant?Reactant are raw materials that react with one another and form products.
What is decomposition reaction?
A decomposition reaction can be defined as a chemical reaction in which one reactant breaks into two or more product.
Hence the correct explanation about the reaction is "because there is only one reactant"
To know more about reactant here
https://brainly.com/question/17096236
#SPJ2
What would you use to determine whether an acid or alkali has been added to a solution?
A. Reactant
B. Indicator
C. Adjustor
D. Identifier
Answer:
B. Indicator
Explanation:
An indicator is used to determine whether an acid or alkali has been added to a solution.
An acid or alkali changes the hydrogen ion concentration in solution. This is indicated by the pH of the solution after which the acid or alkali has been added.
To see this change, indicators are used. An indicator employs color changes to show a change in chemical properties which pertains to the pH. There are several indicators used which are litmus paper, phenolphthalein, methyl orangeplease help and if u dont know that ok but pleas don't give me the wrong answer
Answer: The answer is 2 and 4
Answer: B
Explanation: Some types of waves are able to travel through space. Some can even travel through solids and liquids.
9. Which atom is more likely to make a positive charge?
Oxygen or Hydrogen
What happens when an electric charge moves
Answer:
When an electric charge moves, heat is dissipated due to the drift velocity hence current is induced
(b) What is the solubility of lead chromate in moles per dmcube ksp
for PbC10,=2.8x10*-13 mole/dmº
The solubility of lead chromate : s= 5.29 x 10⁻⁷ mol/L
Further explanationGiven
Ksp for PbCl,=2.8x10*-13 mole/dmº
PbCrO4
Required
The solubility
Solution
P b C r O ₄ ( s ) ⇌ P b²⁺( a q) +C r O ₄ ⁻²( a q )
s s s
s= solubility
Ksp P b C r O ₄ = s²
K s p = [ P b ²⁺] [C r O ₄ ⁻² ]= 2.8x10⁻¹³
s = √2.8x10⁻¹³
s= 5.29 x 10⁻⁷ mol/L
(I will give a Brainliest)
How would you describe the change in the arrangement of particles as heat energy and
temperature increase?
Which one of these is NOT one of the characteristics of living things?
A.All living things reproduce.
B.All living things are composed of one or more cells.
C.All living things grow develop and have life spans.
D.All living things provides heat and light on Earth.
Answer:
D. All living things provides heat and light on Earth.
Explanation:
its the sun that does that
Answer:
option d.
Explanation:
all living things provides heat and light on Earth.
What is the poH of a
2.6 x 10-6 M H+ solution?
pOH = [?]
Answer:
pOH = 8.41
Explanation:
From the question given above, we obtained the following information:
Concentration of Hydrogen ion [H⁺] = 2.6×10¯⁶ M
pOH =?
Next, we shall determine the pH of the solution. This can be obtained as follow:
Concentration of Hydrogen ion [H⁺] = 2.6×10¯⁶ M
pH =?
pH = – Log [H⁺]
pH = – Log (2.6×10¯⁶)
pH = 5.59
Finally, we shall determine the pOH of the solution. This can be obtained as follow:
pH = 5.59
pOH =?
pH + pOH = 14
5.59 + pOH = 14
Collect like terms
pOH = 14 – 5.59
pOH = 8.41
Therefore, the pOH of the solution is 8.41
Answer:
8.41
Explanation:
Which electron configuration is impossible?
a. ls22s22p2d2
b. 1s22s22p63s23p64s
c. 1s22s22p63s23p3
d. 1s22s22p63s2
e. 1s22s22p63s23s54s
1
Answer:
MP hippopotamus
Explanation: I'm in the fifth grade so yeah I really don't know this so I'm just going to say some random stuff and white cheddar mac and cheese warm TV perfect back MD 11443 to 2885 eleven 12:20 to 11 132 0.24 answer
How much
much hydrogen gas evolved
when 1.5 current is passed through water for 1.5 hours?
0.042 moles of Hydrogen evolved
Further explanationGiven
I = 1.5 A
t = 1.5 hr = 5400 s
Required
Number of Hydrogen evolved
Solution
Electrolysis of water ⇒ decomposition reaction of water into Oxygen and Hydrogen gas.
Cathode(reduction-negative pole) : 2H₂O(l)+2e⁻ ⇒ H₂(g)+2OH⁻(aq)
Anode(oxidation-positive pole) : 2H₂O(l)⇒O₂(g)+4H⁻(aq)+4e⁻
Total reaction : 2H₂O(l)⇒2H₂(g)+O₂(g)
So at the cathode H₂ gas is produced
Faraday : 1 mole of electrons (e⁻) contains a charge of 96,500 C
[tex]\tt mol~e^-=\dfrac{Q}{96500}[/tex]
Q = i.t
Q = 1.5 x 5400
Q = 8100 C
mol e⁻ = 8100 : 96500 = 0.084
From equation at cathode , mol ratio e⁻ : H₂ = 2 : 1, so mol H₂ = 0.042
How many electrons will an Oxygen (O) atom gain or lose in forming an ion?
Answer:
two electrons.... oxygen needs two electrons to attain stability
What causes the moon to be illuminated?
A. concave
B. reflection
C. medium
D. refraction
Answer:
Reflection
Explanation:
The light from Earth's surface, reflected back towards the Moon, can illuminate it all the same. This is why, when the Moon is in a crescent phase, you can still see features on the dark portion of the Moon: we call this reflected, illuminating light the phenomenon of Earthshine.
Balancing Equations 1. .
_NH4NO3 → _N20 + _H20
Answer:
_ NH4NO3 -> _ N2O + 2 H2O
Explanation:
By having 2 water molecules, we reach the 4 H atoms and 3 O atoms that are present on the left side. We don't add any other coefficients because we already have enough N atoms and we don't have to manipulate the left side at all.
Which of the following is/are true regarding initial and maximal velocity of enzyme-mediated reactions?
a. At very low substrate concentrations, the initial velocity of an enzyme reaction will be lower than the maximal velocity of the enzyme reaction.
b. When an enzyme behaves with Michaelis-Menten kinetics, the initial velocity of that enzyme reaction changes with substrate concentration, but the maximal velocity of that particular enzyme remains the same at a constant enzyme concentration and identical reaction conditions
c. Initial velocity is maintained until maximal velocity is reached.
d. The initial velocity is determined by the slope of the line at the beginning of a reaction when one plots the experimental results of reaction time versus product formed. Maximal velocity is then determined by when the initial velocity no longer significantly changes with increasing substrate concentration.
Answer:
a. True
b. True
c. False
d. True
Explanation:
a). A a very low substrate concentration , [tex]$S<< Km$[/tex]. Thus according to the Machaelis-Menten equation becomes
[tex]$V_0 = \frac{V_{max} \times [S]}{Km}$[/tex]
Here since the [tex]$V_0$[/tex] varies directly to the substrate concentration [S], the initial velocity is lower than the maximal velocity. Thus option (a) is true.
b). The Michaelis -Menten kinetics equation states that :
[tex]$V_0 = \frac{V_{max} \times [S]}{Km+[S]}$[/tex]
Here the initial velocity changes directly with the substrate concentration as [tex]$V_0$[/tex] is directly proportional to [S]. But [tex]$V_{max}$[/tex] is same for any particular concentration of the enzymes. Thus, option (b) is true.
c). As the substrate concentration increases, the initial velocity also increases. Thus option (c) is false.
d). Option (d) explains the procedures to estimate the initial velocity which is correct. Thus, option (d) is true.
How do waves interact with matter ?
When waves travel from one medium to another, they interact. When waves hit a new medium, they may bend or spread out instead of bouncing back like an echo. These three interactions of waves with matter are known as reflection, refraction, and diffraction.
What are wave interactions examples?Interactions include reflection, refraction, and diffraction. An example of wave reflection is an echo. Refraction occurs when waves bend at an angle as they enter a new medium. When waves spread out as they travel through an opening in an obstacle, this is referred to as diffraction.
When two or more waves collide, they interact with one another. Wave interference is the interaction of waves with other waves. When two waves traveling in opposite directions collide, wave interference occurs.
Thus, the interactions of waves with matter are known as reflection, refraction, and diffraction.
To learn more about the wave interactions, follow the link;
https://brainly.com/question/8840507
#SPJ6
What gases make up Jupiter? Name moons of Jupiter Can Jupiter sustain life How many rings does Jupiter have The weather on Jupiter
Answer: Jupiter is made up predominantly of hydrogen. Jupiter's Moon, Europa, might be able to support life. Jupiter has 3 skinny rings. Usually around -234 degrees Fahrenheit.
What makes this inauguration different from the past?
Answer:
there's just a lot of drama around grumpy trumpy's StOlEN eLecTiOn which are all just fake claims. all his hardcore followers are brainwashed into believing anything he says, so people (especially people who are inside the capitol) fear that trump's followers might incite violence AGAIN even after they broke into the Capitol on the 6th.
That's why they have the National Guard and thousands of people to keep the building secure during Biden's Inauguration.
hope this helps!
A barium atom (Ba) would form its most stable ion by the 1. gain of one electron. 2. loss of one electron. 3. loss of 56 electrons. 4. gain of two electrons. 5. loss of two electrons.
By definition, the correct answer is option 5. A barium atom (Ba) would form its most stable ion by the loss of two electrons.
An ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions. Usually, the metal gives up its electrons forming a cation to the nonmetal element, which forms an anion.
In other words, anions are negatively charged ions and are formed when metals gain electrons. Cations are positively charged ions and are formed when a metal loses electrons.
The electrostatic attraction between positives and negatives attracts the particles to each other and creates an ionic compound.
A barium (Ba) atom is a metal, so it loses 2 electrons to comply with the octet rule, which states that the atoms of the elements bond together in an attempt to complete their valence shell, leaving the atom stable with 8 electrons in its last shell and thus be stable.
Finally, the correct answer is option 5. A barium atom (Ba) would form its most stable ion by the loss of two electrons.
Learn more:
https://brainly.com/question/14368735?referrer=searchResultshttps://brainly.com/question/3360830?referrer=searchResultsThe subatomic particle that is different in isotopes
Answer:
Neutrons
Explanation:
Subatomic particles are components atoms, and they include protons, electrons and neutrons. In different isotopes of an atom, the number of neutrons that the atom contains is what changes.
I hope this helps!
HELP me plzzzzzzzzzzzzzzzzz
Answer:
Explanation:
bblblblbllbllbllb1234w
PLS HELP ASAP THIS IS DUE TODAY
Answer: what grade are u in ill help
Explanation:
A 52 gram sample of an unknown metal requires 714 Joules of energy to heat it from
30.5◦C to 82◦C. What is the specific heat of
this metal?
Answer in units of J/g ·
◦ C.
Answer: Approximately [tex]0.267 \frac{\text{J}}{\text{g}^{\circ}\text{C}}[/tex]
===================================================
Work Shown:
We have the following variables
Q = 714 joules = heat requiredm = 52 grams = massc = specific heat = unknown[tex]\Delta t[/tex] = 82-30.5 = 51.5 = change in temperaturenote: the symbol [tex]\Delta[/tex] is the uppercase Greek letter delta. It represents the difference or change in a value.
Apply those values into the formula below. Solve for c.
[tex]Q = m*c*\Delta t\\\\714 = 52*c*51.5\\\\714 = 52*51.5*c\\\\714 = 2678*c\\\\2678*c = 714\\\\c = \frac{714}{2678}\\\\c \approx 0.26661687826737\\\\c \approx 0.267\\\\[/tex]
The specific heat of the unknown metal is roughly [tex]0.267 \frac{\text{J}}{\text{g}^{\circ}\text{C}}[/tex]
Which of the following is a radioactive element?Sodium, Fluorine,Oxygen
francium
Answer:
Fluorine
Explanation:
These particles stick in the atoms and make them radioactive.
which is a characteristics of all ions
Answer:
All ions must a overall charge
Explanation:
Answer:
i belive its B
Explanation:
How does energy from Earth’s interior affect surface changes?
Answer:
Energy produced deep inside Earth heats rock in the mantle. ... As it becomes less dense, the heated rock rises toward Earth's surface. The cooler, denser rock surrounding the heated rock sinks, as Figure 5 shows. In this way, heat inside Earth moves toward the cooler crust.
Explanation:
do you like my og name
Energy from Earth’s interior affect surface changes due to:
Earth heat transport occurs by conduction, mantle convection, hydrothermal convection, and volcanic advection. Thus, about 99% of Earth's internal heat loss at the surface is by conduction through the crust, and mantle convection is the dominant control on heat transport from deep within the Earth.Tectonic processes and flow in Earth's interior drive deformation of Earth's surface that can lead to destructive earthquakes, tsunamis, and volcanic eruptions.Learn more:
brainly.com/question/25543134
ways of preventing rusting
Answer:
Here is your answer......