Jamie is a salesperson in a jewelry store and earns $150 per week, plus 15% of her weekly sales. If Jamie makes $229.50 in one week, what are her sales for that week

Answer:

Step-by-step explanation:

It is likely that Sharon's calculated mean time is the better estimate of the actual mean time for the whole class. This is because she collected data from a larger sample of the class (10 students) than Gerald (4 students). A larger sample size generally results in a more accurate estimate of the population mean.

It is more likely for the mean time calculated by Sharon to be better estimate than that of Gerald.

Mean of a set of data is defined as the average of all the values. It gives the exact middle point of the data set.

Given,

Mean time to complete the assignment taken from 4 students by Gerald = 38 minutes.

Mean time to complete the assignment taken from 10 students by Sharon = 32 minutes

Population size = 30 students

When the sample size is more closer to the population size, the sample mean would be more closer to the actual mean.

So Sharon's estimate is a better option.

Hence the estimate value of mean calculated by Sharon is more likely to be closer to the actual mean.

Learn more about Mean here :

https://brainly.com/question/20747890

#SPJ2

Answer:

Step-by-step explanation:

To determine the ratio of the note B to middle C, we can divide the frequency of B by the frequency of C. Using the information provided, the frequency of B is 493.9 Hz and the frequency of C is 261.6 Hz. The ratio of B to C is therefore 493.9 / 261.6, which is approximately equal to 1.89. This means that the note B is approximately 1.89 times higher in pitch than the note C.

The probability of rolling a sum that is at most 7 = 1/6

What is probability and example?

sample space (S) = 36

The probability of rolling a sum that is at most 7

No of sample space = { (1,6) ,(2,5) ,(3,4), (4,3),(5,2),(6,1)}

n(s)/ total sample space = 6/36

                                        = 1/6

Therefore, he probability of rolling a sum that is at most 7 = 1/6

To learn more about probability check the given link

brainly.com/question/2264527

#SPJ1

The solution for x in the equation ax = bx + c is x = c/(a - b)

From the question, we have the following parameters that can be used in our computation:

ax=bx+c

Also, from the question, we have the following variable to solve

Variable = x

Rewrite the given equation as

ax = bx + c

Using the above as a guide, we have the following:

Subtract bx from both sides of the equation

So, we have the following representation

-bx + ax = bx + c - bx

Evaluate the like terms

ax - bx = c

So, we have

x(a - b) = c

Divide by a - b

x = c/(a - b)

Hence, the solution is x = c/(a - b)

Read more about subject of formula at

https://brainly.com/question/657646

#SPJ1

The term that is the −20,155,392 in the sequence is a₁₀.

A sequence is defined as an arrangement of numbers in a particular order.

The given sequence is 2, -12, 72, -432

a = first term

n = number of terms

r = common ratio

r = -12 / 2 = 72 / -12 = -432 / 72 = -6

a = 2

Therefore, nth term = arⁿ⁻¹

−20,155,392 = 2 × -6ⁿ⁻¹

−20,155,392 / 2 = -6ⁿ⁻¹

- 10077696 =  -6ⁿ⁻¹

6ⁿ⁻¹ = 10077696

6ⁿ⁻¹  = 6⁹

n - 1 = 9

n = 9 + 1

n = 10

Hence, it's the 10th term.

learn more on sequence here:

brainly.com/question/22696821

#SPJ1

The exponential growth function is P = 6.51 (1.0275)^t. The population of the city in 2018 will be 7.66 million. The population of the city will be 10 ​million in 15.82258467 years and the doubling time is 25.55035862 years

The exponential growth function is of the form P = P₀(1+r)^t

where P₀ is the current population, r is the growth rate and t is the time

Given: P₀ =  6.51 million, r = 2.75​% per year

a) The exponential growth function

P = 6.51 (1+0.0275)^t

P = 6.51 (1.0275)^t

​b) The population of the city in 2018

t = 2018-2012 = 6 years

P = 6.51 (1.0275)^t

P = 6.51 (1.0275)⁶ = 7.66 million

​c) When the population of the city will be 10 ​million

P = 6.51 (1.0275)^t

10 =  6.51 (1.0275)^t        (Solve for t)

(1.0275)^t =10/6.51

log (1.0275)^t = log(10/6.51)

t × log (1.0275) = log(10/6.51)

t = [log(10/6.51)] / [log (1.0275)]

t = 15.82258467 years

d) The doubling time

P =  6.51 (1.0275)^t will become:

2 = 1 (1.0275)^t

1.0275^t = 2

log(1.0275)^t = log 2

t log(1.0275) = log 2

t = log 2 / log 1.0275

t = 25.55035862 years

Learn more about population growth function on:

brainly.com/question/25896797

#SPJ1

Using a system of equations, Mike should invest $66,000 in investment A and $24,000 in investment B to earn $5,220 from both funds per year.

We can solve a system of equations to determine the amounts that should be invested in each fund to earn the stated amount yearly.

A system of equations is also called simultaneous equations because they can be solved together.

The total investible funds = $90,000

The expected annual earnings = $5,220

The earnings from investment A = 5% or 0.05

The earnings from investment B = 8% or 0.08

A + B = 90,000  ... Equation 1

0.05A + 0.08B = 5,220 ... Equation 2

Multiply equation 1 by 0.05:

0.05A + 0.05B = 4,500 ... Equation 3

Subtract Equation 3 from Equation 2:

0.05A + 0.08B = 5,220

-0.05A + 0.05B = 4,500

=0.03B = 720

= 24,000 (720/0.03)

B = $24,000

From Equation 1, substitute B = 24,000 to get A:

A + B = 90,000

A + 24,000 = 90,000

= 66,000

A = $66,000

Thus, we can conclude that Mike with $90,000 should invest $66,000 in Investment A earning 5% per year, and $24,000 in Investment B earning 8% annually to earn a total of $5,220 from both funds.

Learn more about a system of equations at https://brainly.com/question/12526075

#SPJ1

There is no enough evidence to assert that the standard deviation of the process (in general) is over 2 mg

To determine whether the standard deviation of the process (in general) is over 2 mg to a 1% level of significance, you can perform a hypothesis test.

In this case, the null hypothesis is that the standard deviation of the process is equal to or less than 2 mg, and the alternative hypothesis is that the standard deviation of the process is greater than 2 mg.

To perform the hypothesis test, you can first calculate the test statistic. That is:

test statistic = (sample mean - hypothesized mean) / (standard error of the mean)

test statistic = (20.2 - 20) / (2.4 / √(13))

                    = 0.2 / 0.67

                    = 0.3

Next, you can look up the critical value for the test statistic in a table of critical values for a one-tailed test with a 1% level of significance and 12 degrees of freedom (df = 13 - 1).

The critical value for the test statistic is 2.6. Since the test statistic (0.3) is less than the critical value (2.6), you cannot reject the null hypothesis.

This means that you do not have enough evidence to assert that the standard deviation of the process (in general) is over 2 mg to a 1% level of significance.

Learn more about test statistic on:

https://brainly.com/question/4621112

#SPJ1

a. The probability of defective shells from the given samples are:

a. Probability of zero defective shells of samples is equal to 0.9510.

b. Probability of one defective shells of samples is equal to 0.04803

c. Probability of more than 1 defective shells of samples is equal to 0.00107.

As given in the question,

Total number of batches = 350

Sample size used to test for each batch 'n' = 5

Actual defective shells (success) 'p' = 1%

                                                           = 0.01

Actual non-defective shells ' 1 - p ' = 1 - 0.01

                                                         = 0.99

a. Probability of zero defective shells from the given samples is

=  ⁵C₀ × ( 0.01 )⁰ × (0.99)⁵⁻⁰

= [ (5!)/(5-0)!0! ] × 1 × ( 0.99)⁵

= 0.9510

b. Probability of 1 defective shells from the given samples is

= ⁵C₁ × ( 0.01 )¹ × (0.99)⁵⁻¹

= [ (5!)/(5-1)!1! ] × 0.01 × ( 0.99)⁴

= 5 × 0.01 × 0.9606

=0.04803

c. Probability of more than 1 defective shells from the given samples is

= P(2) + P(3) + P(4) + P(5)

= ⁵C₂ × ( 0.01 )²× (0.99)⁵⁻² + ⁵C₃ × ( 0.01 )³ × (0.99)⁵⁻³ + ⁵C₄× ( 0.01 )⁴ × (0.99)⁵⁻⁴+ ⁵C₅× ( 0.01 )⁵× (0.99)⁵⁻⁵

= 0.00097 + 0.000098 +0.000000044 +0.0000000001

=0.00107

Therefore, the probability of following conditions are as follow:

a. Probability of zero defective shells of samples is equal to 0.9510.

b. Probability of one defective shells of samples is equal to 0.04803

c. Probability of more than 1 defective shells of samples is equal to 0.00107.

Learn more about probability here

brainly.com/question/11234923

#SPJ4

Interest in $2800 when deposited $7,000 in an account earning 10% interest compounded annually.

Simple interest is a quick and simple formula for figuring out how much interest will be charged on a loan. The daily interest rate, the principle, and the number of days between payments are multiplied to calculate simple interest. Simple Interest (S.I.) is a way for figuring out how much interest will accrue on a specific principal sum of money at a certain rate of interest. For instance, if someone borrows $5000 at a rate of 10 p.a. for two years, they will pay S.I. on the borrowed money for those two years.

Given

Principal = $7000

Rate = 10%

Time = 4 years

Using simple interest formula,

PRT

7000 × 0.1× 4

2800

Interest in $2800 when deposited $7,000 in an account earning 10% interest compounded annually.

To learn more about simple interest, visit:

https://brainly.com/question/28739900

#SPJ1

Answer: 3,248.70

Step-by-step explanation: You can use this formula when working with compound interest:

B=p(1+r)t

In this formula, B is the balance (final amount), p is the principal (starting amount), r is the interest rate expressed as a decimal, and t is the time in years.

The interest is the balance minus the principal.

solve

Write the rate as a decimal.

10%=0.10

Calculate the balance.

B

= p(1+r)t

= $7,000(1+0.10)4

= $7,000(1.10)4

= $7,000(1.4641)

= $10,248.70

Now use this to find the interest, which is the balance minus the principal.

$10,248.70–$7,000=$3,248.70

The interest will be $3,248.70.

The graph in the problem is interpreted as follows

What interpretation can be made from the y-intercept?

the y-intercept shows start the timing started when the cheetah is not running

How can the point (3.0, 12) on the graph above be interpreted? At 3.0 s the cheetah was running at 12 m/s

What is the output value of this graph when the input value is 5.0?

the output is 30

Does the graph above have a constant rate of change?

No, the rate of change varies

The term "rate of change" describes the rate at which something changes over time.

Thus, it is not the amount of individual changes themselves but rather the acceleration or deceleration of changes (i.e., the rate).

When the ratio of the output to the input remains constant at every given point along the function, the rate of change is said to be constant.

The slope is another name for the constant rate of change. The rate of change for linear functions will be constant.

Learn more about graph interpretation at:

https://brainly.com/question/23086745

#SPJ1

Answer:

its the first option explanation is up top

Answer: Given the log function ln(100), this can therefore be written as loge(100)

Step-by-step explanation: Logarithmic functions

Logarithmic functions are inverse of exponential functions. There are different ways to write log function;

Some are written as a exponent base

Some to the base of 10

Loga is also written as log10(a)

lna is written as loge(a)

Given the log function ln(100), this can therefore be written as loge(100)

Answer: C log(10).

Step-by-step explanation: When you calculate In (10), you would be finding the value of log(10).

In mathematics, the logarithm function is used to express the exponent to which a base must be raised in order to produce a given number. The base of the logarithm is usually denoted by "b" and the number whose logarithm is being taken is denoted by "x". The logarithm of x to base b is denoted as logb(x).

For example, the logarithm of 10 to base 10 is denoted as log10(10), which is equal to 1. The logarithm of 100 to base 10 is denoted as log10(100), which is equal to 2.

In general, the logarithm of x to base b can be calculated as follows:

logb(x) = y

This equation states that b raised to the power of y is equal to x.

The natural logarithm, denoted as In, is a special case of the logarithm function where the base is the mathematical constant e (approximately 2.718). The natural logarithm of x, denoted as In(x), is equal to the logarithm of x to base e.

Therefore, when you calculate In (10), you are finding the value of the natural logarithm of 10, which is the logarithm of 10 to base e.

Option A log (10) is incorrect because it is missing the base of the logarithm (e).

Option B log₁0(e) is incorrect because it is the logarithm of e to base 10, which is not the same as the natural logarithm of 10.

Option D 10 In(e) is incorrect because it is the value of 10 raised to the power of the natural logarithm of e, which is not the same as the natural logarithm of 10.

Option C log(10) is correct because it is the natural logarithm of 10, which is the value we are trying to find. Therefore, the correct answer is C log(10).

The equation that represents the line of Paul's grade downfall is y = -20x + 130.

To find the equation of the line that represents Paul's grade downfall, we need to use the two points given: (2, 90) and (4, 50).

We can use the slope-intercept form of a linear equation,  y = mx + b, where m is the slope of the line and b is the y-intercept.

To find the slope of the line, we can use the formula: slope (m) = (y2 - y1)/(x2 - x1).

Plugging in the values from the two points we have:

m = (50 - 90)/(4 - 2) = -40/2 = -20.

y = mx+b     [Using  (x= 2, y = 90)]

90 =-20(2) + b

90 = -40

b = 130

Plugging these values into the slope-intercept form, we get:

y = -20x + 130.

Thus, the equation is y = -20x + 130

Learn more about the equation of a line on:

brainly.com/question/25826868

#SPJ1

True, The dimension of the eigenspace for each eigenvalue equals the multiplicity.

Eigenvalues are a unique set of scalar values connected to a set of linear equations that are most likely seen in matrix equations. The characteristic roots are another name for the eigenvectors. It is a non-zero vector that, after applying linear transformations, can only be altered by its scalar factor.

When a linear transformation is done to an eigenvector, a set of eigenvectors called an eigenspace is created for each eigenvalue. In many cases, the linear transformation uses a square matrix (a matrix that has the same number of columns as it does rows).

yes, it is true that the dimension of an eigenspace of a symmetric matrix is sometimes less than the multiplicity of the corresponding eigenvalue.

to learn more about eigenvalue visit:

https://brainly.com/question/29565569

#SPJ4

The answer is 64

If you need a breakdown I don't know how to help.

Given is the equation of a line with slope of m = 3 and [y] intercept of c = -8.

The general equation of a straight line is -

Other possible equations of lines are -

We have the equation of line as -

y = 3x - 8

The given is the equation of a line with slope of m = 3 and [y] intercept of c = -8.

Therefore, given is the equation of a line with slope of m = 3 and [y] intercept of c = -8.

To solve more questions on straight lines, visit the link below-

brainly.com/question/20400984

#SPJ1

Answer: x = 10.57 and y = 15 degree

Step-by-step explanation:

Answer: x= 10 degrees

y= 15 degrees

Step-by-step explanation:

Answer: 48

Step-by-step explanation:

Using isosceles triangle [tex]XWZ[/tex], we know that [tex]WZ=11[/tex].

Using equilateral triangle [tex]XYZ[/tex], we know that [tex]YZ=XY=11[/tex].

So, the perimeter is [tex]WX+WZ+ZY+XY=11+11+11+15=48[/tex].

The speed from City A to City B is 873.33 mi/h.

What is the speed, distance and time?

That is speed = distance ÷ time. Or to put it another way, distance divided by speed will give you the time. Provided you know two of the inputs you can work out the third.

Let's call the speed from City A to City B x. The speed on the return trip was 1.2x. The total distance traveled was 2400 + 2400 = 4800 mi. The total time taken was 330 minutes, which is 330/60 = 5.5 hours. The average speed is the total distance traveled divided by the total time taken, so:

4800 mi / 5.5 h = 873.33 mi/h

The total speed for both legs of the trip is 873.33 + 873.33 = 1746.66 mi/h

The speed for just one leg of the trip is half of the total speed, so the speed from City A to City B is 1746.66/2 = 873.33 mi/h.

Hence, the speed from City A to City B is 873.33 mi/h.

To learn more about the speed, distance, and time visit,

https://brainly.com/question/26046491

#SPJ1

The length of UT if, The line UV || RS, UV is 12 less than UT, RT = 42, and RS = 21 is,24.

Parallel lines are any two or more lines that all lie in the same plane and never cross one another. They are equally spaced apart and have the same incline.

Given:

The line UV || RS,

UV is 12 less than UT,

RT = 42, and RS = 21,

Write the equation for the UV and UT,

UV = UT - 12

Calculate the value of UT as shown below,

UT / RT = UV / RS     (For parallel lines, the ratio should be the same)

UT / 42 = (UT - 12) / 21

21 × UT / 42 = (UT - 12)

UT / 2 = (UT - 12)

UT = 2UT - 24

2UT - UT = 24

UT = 24

To know more about parallel lines:

https://brainly.com/question/29762825

#SPJ1

The numbers as they appear from left to right on a horizontal number line is Horizontal number line.

This line is used to compare numbers that are placed at equal intervals on an infinite line that extends on both sides, horizontally or vertically. As we move towards the right side of a horizontal number line, the numbers increase; as we move towards the left, the numbers decrease.

What's the equation of a horizontal line?

Horizontal lines have a slope of 0. Thus, in the slope-intercept equation y = mx + b, m = 0. The equation becomes y = b, where b is the y-coordinate of the y-intercept.

-2.76

-2.57

-2.5

-1.85

-1.58

2.5

2.85

On a number line, we have this horizontal line, meaning it moves left and right, and zero is placed in the middle.

To learn more about horizontal number visit:

https://brainly.com/question/28422906

#SPJ1

Answer:

56.7C

Step-by-step explanation:

The highest temperature on the was 56.7C and it is recorded in United States on 10 July 1913

The correct option  4 and 25; the degrees of freedom for the critical value of f.

The essential value F's degrees of freedom are (k-1,n-k).

Four sample groups are provided to us, so,

k = 5.

Additionally, we know that each of the five groups has six observations, therefore

n = 5*6

n = 30

The crucial factor F can vary in freedom.

(k-1,n-k)

(5-1, 30 - 5)

(4,25).

Its degrees of freedom again for critical F value are as a result (4,25).

To know more about the degrees of freedom, here

https://brainly.com/question/17305237

#SPJ4

Step-by-step explanation:

y = mx + b

m = 3

b = 2

y = 3x + 2

______________________

y = mx + b

m = 1/2

b = -1

y = 1/2x + (-1)

y = 1/2x -1

The inverse of the rational function h(x) = (2 · x + 3) / (4 · x - 5) is the rational function h⁻¹(x) = (5 · x + 3) / (4 · x - 2).

In this problem we have the definition of a rational function:

h(x) = (2 · x + 3) / (4 · x - 5)

Of which we must determine the inverse of the rational function by using algebraic properties:

h⁻¹(x) = f(x)

First, use the following substitution on h(x):

x = h(x)

h⁻¹(x) = x

Second, substitute in the rational equation:

x = [2 · h⁻¹(x) + 3] / [4 · h⁻¹(x) - 5]

Third, clear h⁻¹(x) in the expression by algebraic properties:

x · [4 · h⁻¹(x) - 5] = 2 · h⁻¹(x) + 3

(4 · x - 2) · h⁻¹(x) = 5 · x + 3

h⁻¹(x) = (5 · x + 3) / (4 · x - 2)

To learn more on rational equations: https://brainly.com/question/20850120

#SPJ1

The graphs of the equations are drawn ad attached here.

The slope-intercept form of a line is y = mx +c where m is the slope of the line and c is the y-intercept.

The given equations are (i) y = x-4, (ii) y = 2x-4, (iii) y = 3x-4.

The equations are given in the slope-intercept form.

(i) The given equation is y = x-4.

   the y-intercept of the equation is (0,-4).

Now, substitute y = 0 into the given equation:
0 = x - 4

x = 4

Hence, the line y = x-4 passes through points (0,-4) and (4,0).

Now, draw a line passing through the points (0,-4) and (4,0).

Using the same procedure, the graphs of the other two equations are also drawn.

Hence, the graphs of the equations are drawn ad attached here.

To learn more about the slope-intercept form of a line, click here:

https://brainly.com/question/9682526

#SPJ1

Answer:

377 is answer

Step-by-step explanation:

12.33-25 +6

396-25+6

377

Part A:

This data appears to be modeling a geometric sequence because the time to complete each station is increasing by a constant factor. For example, the time to complete station 2 is 4 minutes, which is double the time it took to complete station 1. Similarly, the time to complete station 3 is 8 minutes, which is double the time it took to complete station 2, and so on.

Part B:

To find the time Aurora will take to complete station 5 using a recursive formula, we can use the formula:

a_n = a_1 * r^(n-1)

where a_n is the time it takes to complete station n, a_1 is the time it takes to complete station 1, and r is the common ratio (the factor by which the time increases from one station to the next).

We are given that a_1 = 2 and a_2 = 4, so we can solve for r:

r = a_2 / a_1

= 4 / 2

= 2

Then we can use this value of r to find the time it takes to complete station 5:

a_5 = a_1 * r^(5-1)

= 2 * 2^4

= 2 * 16

= 32

Therefore, Aurora will take 32 minutes to complete station 5.

Part C:

To find the time Aurora will take to complete station 9 using an explicit formula, we can use the formula:

a_n = a_1 * r^(n-1)

where a_n is the time it takes to complete station n, a_1 is the time it takes to complete station 1, and r is the common ratio (the factor by which the time increases from one station to the next).

We are given that a_1 = 2 and a_2 = 4, so we can solve for r:

r = a_2 / a_1

= 4 / 2

= 2

Then we can use this value of r to find the time it takes to complete station 9:

a_9 = a_1 * r^(9-1)

= 2 * 2^8

= 2 * 256

= 512

Therefore, Aurora will take 512 minutes to complete station 9.

say no more

Step-by-step explanation:

the domain is the interval or set of all valid x- (or input-)values. in our case here t-values.

the graph shows us

0 <= t <= 35

For the given condition on the graph, the domain of the function is

0 ≤ t ≤ 36.

A function is an expression, rule, or law in mathematics that describes a connection between one variable (the independent variable) and another variable (the dependent variable). Functions are common in mathematics and are required for the formulation of physical connections in the sciences. A function is defined as a relationship between a group of inputs that each have one output. A function is a connection between inputs in which each input is associated to exactly one output.

Here,

The correct answer is option B. 0 ≤ t ≤ 36

To do this question, the main thing is to look at picture.

We know from the graph that this is a quadratic function, So t has to be less than some positive number.

{ if t → -∞, H(t) → -∞, not in the line with the actual situation}

and look at the graph, the point where H(t) equals zero, one is 0 and one is 36.

The domain for the function is 0 ≤ t ≤ 36 for given condition in the graph.

For more information on function,

brainly.com/question/28193995

#SPJ5