The ball's initial speed as it descended straight down from a height was 17.5 miles per hour.
The starting velocity is the speed at time t = 0. (u). It is the speed at which motion first becomes apparent. Four equations can be used to calculate initial velocity: (1) If time, acceleration, and end velocity are known, the initial velocity can be calculated using the formula u = v - at.
Calculation:We can simply use the following equation of motion to solve this:v² - u² = 2 × a × s
here, v = final velocity = 7.5 m/s
a = 9.81 m/s^2
s = 2.0 m
Solving for u (initial velocity) we get:
(7.5)² - u² = 2 × 9.8 × 2
56.25 - u² = 39.2
u² = 56.25 - 39.2
u² = 17.05
To know more about velocity visit:-
https://brainly.com/question/18084516
#SPJ4
HELP HELP HELP HELP HELP
Answer:
Explanation: case b i think
What causes high latency?
A low bandwidth will result in a high ping (delay) and, most likely, lag while you're playing. It will also affect how quickly data is delivered and then received.
When latency is high, what does that mean?Because of the temporal lag caused by high latency, gaming might be much less enjoyable. It is essential because low latency allows for more fluid gameplay. Typically, a latency (or ping) of 40–60 milliseconds (ms) or less is considered to be acceptable.
What happens when latency is reduced?Your website resources will load more quickly if server latency is reduced, which will also improve the time it takes for visitors to load all of your pages.
To know more about latency visit:-
https://brainly.com/question/14894222
#SPJ4
1. Two objects with the same mass move toward each other with the same speed and experience an elastic collision. Compare the final velocities of each object to their initial velocities
Answer:
M1 U1 + M2 U2 = ( M1 + M2 ) V
Explanation:
they rebounce, therefore it's elastic.
On a frictionless surface, a 2-kilogram cart moves at a velocity of 3 meters per second west and hits a 4-kilogram cart that is not moving, initially. The two carts stick together and move off at a slower speed to the west. What is this slower speed?
a. 0. 5 meters/second
b. 1 meter/second
c. 1. 5 meters/second
d. 2 meters/second
Answer:
b
Explanation:
Use law of conservation of momentum
momentum before = momentum after hit
2 kg * 3 m/s = ( 2 + 4) kg * x m/s
solve for x = 1 m/s
Running at 2. 0 m/s, Burce, the 45. 0 kg quarterback, collides with Max, the 90. 0 kg tackle, who is traveling at 7. 0 m/s in the other direction. Upon collision, Max continues to travel forward at 1. 0 m/s.
What is the new velocity of Bruce?(list unknown variable and known variables, write an equation, plug in numbers, and get answer with unit. )
Burce, a 45-kg quarterback, collides with Max, a 90-kg tackle, who is moving at 7.0 m/s in the opposite direction, as he runs at 2.0 m/s. This results in Bruce's new speed being 14 m/s.
Max hits the ground moving forward at a speed of 1.0 m/s. A moving object's velocity is a function of time and measures how quickly its position changes in relation to a frame of reference. When an object is moving, its speed and direction are specified by its velocity. A collision in physics is referred to as an elastic collision when the combined kinetic energy of the two bodies stays constant. A collision that is ideal and absolutely elastic
V1 = (720 - (90)(1))/45
V1 = 14m/s
Learn more about speed here
https://brainly.com/question/28224010
#SPJ4
What is the difference between the weight of an object and the mass of an object?
A body's mass is the total amount of its material. Gravitational pull on a body is represented by weight.
What is the difference between mass and weight?The relationship between mass and weight Mass is a measure of inertia, whereas weight is a measure of force.
Both of these names are frequently used in the same sentence. Calculating how much matter a body contains requires knowing its mass.
Weight is a unit of measurement for the force that gravity's acceleration has on a mass.
Weight is a measurement of how the force of gravity works upon a mass, whereas mass is a measure of the amount of matter in a material.
In order to determine how much matter a body contains, we need to use its mass.
To learn more about mass and weight refer to:
brainly.com/question/1966951
#SPJ4
What is the velocity of the particle at time t 0?
The velocity of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Velocity is the rate of change of velocity. At any point on a trajectory, the magnitude of the velocity is given by the rate of change of velocity in both magnitude and direction. Velocity of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of we can calculate. Hence by the primary information that we have we can formerly consider that the velocity which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Learn more about Velocity:
brainly.com/question/18084516
#SPJ4
Consider you are X units in distance from a light source. You receive Y unit of light per unit time. You have to be _____ X units in distance from the light source in order to receive 4Y unit of light per unit time.
when it takes 4x units of distance from the light for you to receive 4Y units of light in a given amount of time.
What is a distance?Distance is a measurement of the separation between two things or locations, either quantitatively or qualitatively. A physical distance or perhaps an estimate relying on other physics- or usage-related characteristics can both be referred to as distance. The phrase is also employed metaphorically to denote a measurement of the degree of distance between two common pieces since spatial intelligence is a rich source of implicatures in human understanding. The majority of these concepts of distance, both literal and figurative, are codified using the idea of a metric space.
To learn more about distance follow the given link: brainly.com/question/12356021
#SPJ4
Calculate the wavelength, in meters, of electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element.
The wavelength of the electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element is 2.7522m.
The electromagnetic (EM) field's waves, which travel across space carrying momentum and electromagnetic radiant energy, make up electromagnetic radiation (EMR). It consists of X-rays, gamma rays, microwaves, infrared, visible light, ultraviolet, and radio waves. These waves are all components of the electromagnetic spectrum.
We are given that,
Speed of light = c = 299 792 458 m
The frequency of electron = f = 1.09 × 10⁸ s⁻¹
The following equation can be used to determine the wavelength of a radio wave
Wavelength = λ = c/f
λ = c/f
λ = 299 792 458 m/s/ 1.09 × 10⁸ s⁻¹
λ = 2.7522m
Therefore the wavelength of the electromagnetic radiation would be 2.7522m.
To know more about wavelength
https://brainly.com/question/1263539
#SPJ4
Salt dissolves in water to form saltwater. Is this considered a chemical change or a physical change
Salt dissolves in water to form saltwater. This kind of change is regarded as a chemical change.
A physical change is a kind of change in which only the physical properties of matter change. In a physical change, neither the composition nor the chemical nature of matter is changed.
A chemical change involves a chemical process that results in the production of new substances. When you dissolve salt in water the sodium chloride dissociates in Na+ and Cl- ions which can be written in the form of a chemical reaction as,
NaCl → Na+(aq) + Cl-(aq)
Thus, dissolving salt in water is an example of a chemical change.
To know more about chemical change:
https://brainly.com/question/2496486
#SPJ4
Diana raises a 1000. N piano a distance (Links to an external site.) of 5.00 m using a set of pulleys. She pulls in 20.0 m of rope. How much work was done on the object
The 5000 N-m work was done on the object.
How is labor done measured?The formula Work = Force * Distance can be used to compute work. The joule (J) or Newton-meter (N-m) is the SI unit for work. When 1 N of force pushes an item a distance of 1 m, the work done is equal to 1 joule.
What kind of work is an example?There are several instances of work being done in our daily lives. A student holding a backpack on his back or his shoulder full of books, a horse pulling a plow across the field, a father pushing a supermarket cart in a mall, and many more examples come to mind.
Given:
Load force = 1000 N
Load distance = 5.00 m
Effort distance = 20.0 m
[tex]Work=Load*Load distance[/tex]
[tex]Work=1000*5.00[/tex]
[tex]Work=5000N-m[/tex]
To know more about work done visit:
https://brainly.com/question/16032440
#SPJ4
Stern observed all of the following results EXCEPT _______ in his experiment. A. one of the recombinant phenotypes was associated with an X chromosome of normal length B-the number of car, B. male offspring was roughly equal to the number of car+, B male offspring C. the number of males was roughly equal to the number of females D. offspring with red, round eyes resulted from fertilization of eggs containing recombinant X chromosomes
The number of males was roughly equal to the number of females: Stern observed all of the following results EXCEPT _______ in his experiment.
What is experiment?
The Stern-Gerlach experiment (also known as the Stern-Gerlach experiment or the Stern-Gerlach magneto-optical experiment) was a landmark experiment in the early 20th century that demonstrated the inherent quantization of atomic-scale systems. It was conducted in 1922 by Otto Stern and Walther Gerlach in Germany.
The experiment showed that when a beam of silver atoms was passed through a non-uniform magnetic field, the beam split into two separate beams travelling in different directions. This showed that the silver atoms had two possible orientations of their magnetic dipole moment, which could only take on two discrete values. This phenomenon is now known as the Stern-Gerlach effect and is a fundamental part of quantum mechanics.
To learn about more experiment.
https://brainly.com/question/26117248
#SPJ4
What are two way in which early psychological research was biased? What’s an example of bias in psychology?
Psychological research gives us information about the research that psychologists conduct for systematic study and for analysis of the experiences and behaviors of individuals or groups.
Give the two methods on which early psychological research was based.
There are two ways in which psychological research is based and that is the research being androcentric and ethnocentric. Examples of this include the theory of personality and the attachment of the theory.
There are many more biases is well in psychological research which are Citation bias, Language bias, and Outcome reporting bias. The citation bias includes whether the research receives citations or not. Language bias includes when research is published in one language over another. The outcome reporting bias includes that when only some outcomes are reported from a study.
So we can conclude that there are two ways in which early psychological research was biased and that are; when research is androcentric and ethnocentric.
Learn more about Psychology here: https://brainly.com/question/12011520
#SPJ1
Suppose you are pushing a stalled car. As the car gets going, you need less and less force to keep it going. For the first 15 m, your force decreases at a constant rate from 210.0 N to 40.0 N. How much work did you do on the car
The work done during this period will be 1875 J. It will be positive if the body is displaced in the same direction of the force.
Work done can be defined as the product of applied force and the distance through which the body is displaced where the force is applied.
The value of work can be zero, positive and negative. It depends on the direction of the body displaced.
Data given in the question is;
Let F be the average force applied by the worker
D is the displacement = 15 m
The average force is ;
[tex]F_{avg=\frac{F1+F2}{2}[/tex]
[tex]F_{avg=\frac{210+40}{2}\\[/tex]
[tex]F_{avg=125 J[/tex]
The work done by the worker will be:
W=Fd
W=125x15
W=1875 J
Hence the work done during this period will be 1875 J.
To learn more about the work done:
brainly.com/question/3902440
#SPJ4
he cars mass was only 111 kg. Suppose two of these cars are used in a stunt crash for an action film. If one car's initial velocity is 9.00 m/s to the right and the other car's velocity is 5.00 m/s to the left, how much kinetic energy is discinated in the crash
In the crash 5883 Joule kinetic energy is discinated when two of these cars are used in a stunt crash for an action film.
How do you use start kinetic energy to calculate end kinetic energy?Final kinetic energy (KE) is equal to 1/2 m1v'12 + 1/2 m2v'22 , or joules. The end kinetic energy for common things will be lower than the starting point. The only way you can increase kinetic energy is if the impact causes an energy release of some type.
How can total kinetic energy be calculated?As a result, the kinetic energy equation states that it is equal to 1/2 the object's mass times the magnitude of its velocity squared, or speed squared.
Initial kinetic energy KE,
[tex]KE=1/2 m_1v_1^2 + 1/2 m_2v_2^2[/tex]
[tex]KE=1/2 (111)(9.00)^2 + 1/2 (111)(5.00)^2[/tex]
[tex]KE= 4495.5+1387.5[/tex]
[tex]KE= 5883J[/tex]
To know more about kinetic energy visit:
https://brainly.com/question/25959744
#SPJ4
An object that is moving in uniform circular motion will definitely have a large acceleration if it is
If a circular motion is accelerated, it will undoubtedly have a high Turning at a rapid rate.
What happens when something moves uniformly in a circle?When an object travels along a circular path at a constant speed, it is said to be in uniform circular motion (UCM).So because object's direction was constantly shifting, the velocity doesn't really remain constant along with the speed.To maintain a circular course, the object must speed up toward the the circle's center.
Is the rate of acceleration constant in uniform circular motion?As the particle moves in a circle, its direction of acceleration is continuously changing since it is continually moving toward the center.As a result, it is variable.
To know more about large acceleration visit:
https://brainly.com/question/773522
#SPJ4
Temperature changes can affect substances in different ways. Which of these actions will form a new substance with different properties?
Phase states and abrupt changes in temperature. If the temperature it is exposed to changes drastically, a substance may go through a phase shift, changing from a solid to a gas or from a gas to a solid.
A solid can sublimate, or phase transition from a solid to a gas without ever existing as a liquid, if the temperature around it rises very quickly.
When bonds between molecules or atoms are created, disrupted, or both, chemical changes result. This implies that a substance with a particular set of properties such as melting point, colour, flavor, etc. becomes a substance with a different set of characteristics.
Physical alterations can often be reversed more easily than chemical changes. The condition in which a substance is in can be substantially influenced by its temperature. Matter might be in a solid, liquid, or gaseous form. Every material in the universe has a specific temperature threshold that, when crossed, causes a phase transition that alters the state of the substance. When matter absorbs or loses energy, its states change.
To know more about temperature
https://brainly.com/question/1726738
#SPJ4
In the definition of weight, W = mg, the mass m refers to an inertial mass.
True or false
Answer:
True
Explanation:
In the definition of weight, W = mg, the mass m refers to an inertial mass.
What is the index of refraction of a refractive medium which slows the light to 1.88 x 10^8 m/s. What the index of the second medium
If the index of refraction of a refractive medium slows the light to 1.88 x 10^8 m/s. The index of the second medium is: 1.60.
How to find the index of the second medium?Using this formula to find the index of the second medium
n = c/v
Where:
n = refractive index of the medium
c = velocity of light in vacuum
v = velocity of light in the medium.2
Let plug in the formula
n = (3 x 10^8 m/s)/ 1.88 x 10^8 m/s
n = 300,000,000/188,000,000
n = 1.595
n = 1.60 (Approximately)
Therefore we can conclude that the refractive index of the medium is 1.60.
Learn more about refractive index of the medium here:https://brainly.com/question/12768121
#SPJ1
According to legend, the evidence that stimulated Newton to propose the law of universal gravitation emerged from a study of ____. a. the motion of the moon and other celestial or heavenly bodies b. the fall of an apple to the Earth c. the gravitational interaction of smaller objects upon the Earth d. ...nonsense! There was no evidence; it was just proposed as a theory.
According to legend, the evidence that stimulated Newton to propose the law of universal gravitation emerged from a study of the motion of the moon and other celestial or heavenly bodies.
Newton made a comparison between the moon's acceleration and that of earthly objects. Newton was able to make a significant discovery regarding the relationship between gravity and distance by assuming that gravitational forces were in charge of each.
He came to the conclusion that the force of gravitational attraction between the Earth and other objects is inversely proportional to the separation between the centres of the two objects as a result of this comparison. But there are other factors than distance that might impact how strong a gravitational force is.
To know more about gravitation:
https://brainly.com/question/12720301
#SPJ4
find the rise in temperature when given: 1.original length(2.0m),2.linear expansivity(25),3.increase in length(3.0mm)
According to the answer the rise in temperature is 0.12K..
What is temperature?Temperature is a measure of the average kinetic energy of particles within a substance. It is measured in degrees on a wide range of scales such as Celsius, Fahrenheit, and Kelvin. Temperature is an important indicator of a material’s state and behaviour, as it influences the rate of chemical reactions and the physical properties of materials. Temperature also affects the flow of heat and the direction of heat transfer. For example, heat flows from hot to cold, and cold air will sink while warm air will rise. Temperature is also used to measure the average kinetic energy of molecules in a gas, which ultimately determines its pressure and volume. Temperature is an important environmental variable, as it affects the Earth’s climate and weather.
The rise in temperature can be found using the formula for linear expansivity, which states that the change in length is equal to the linear expansivity multiplied by the change in temperature.
Change in length(ΔL) = Linear expansivity(α) × Change in temperature (ΔT)
Therefore,
3.0mm = 25 × ΔT
ΔT = 3.0mm/25
ΔT = 0.12K
Therefore, the rise in temperature is 0.12K.
To learn more about temperature
https://brainly.com/question/27988898
#SPJ1
Determine the missing forces A-H
The missing forces in the diagram given are: A = 50 N; B = 200 N; C = 1100 N; D = 20 N; E = 300 N; F = 0 N; G = 50 N and H = 0 N.
What is resultant force?In physics and engineering, a resultant force is a single force and associated torque obtained by combining a system of forces and torques acting on a rigid body by vector addition. The characteristic of a resultant force or force-torque is that it has the same effect on a rigid body as the original force system. The resulting forces on the body are calculated and visualized by computational analysis or (for sufficiently simple systems) by free-body diagrams.
For A and B:
Since net force is zero the applied forces in all four direction will be equal but opposite.
So A will be 50 N and B will be 200 N.
For C:
The net force is 900 N;
C = 900 + 200
C = 1100 N
For D and E:
The net force is 60 N left; this means the net upward or downward force acting on the object is zero.
So E = 300 N
D = 80 - 60
D = 20 N
For F, G and H:
The net force is 30 N right; this means the net upward or downward force acting on the object is zero.
So F and H will be zero.
G = 20 + 30
G = 50 N
To know more about force, visit:
https://brainly.com/question/28875770
#SPJ1
The length of nylon rope from which a mountain climber is suspended has a force constant of 1.2×104 N/m.
a. What is the frequency, in Hz, at which he bounces, given his mass and the mass of his equipment is 98 kg?
b. How much would this rope stretch, in centimeters, to break the climber's fall if he free-falls 1.8 m before the rope runs out of slack?
c. What is the frequency, in Hz, at which he bounces, given his mass and the mass of his equipment is 98 kg if the rope is twice as long?
d. How much would this rope stretch, in centimeters, to break the climber's fall if he free-falls 1.8 m before the rope runs out of slack if he rope was twice the length?
The length of nylon rope from which a mountain climber is suspended has a force constant of 1.15 ✕ 104 N/m.
What is the force constant measured in?Spring constant is the common name for the force constant. Hooke's law states that F=-kx. k=N/m is used to replace units in the equation where F is force, x is displacement, and k is force constant (spring constant) to determine the SI unit of force constant (spring constant).
What is a graph's force constant?The slope (gradient) of the graph equals the force constant. The proportionality constant, or k, is also known as the force constant in physics. A spring that is more rigid will have a higher value for k. The graph is no longer a straight line beyond point A since the gradient has changed and the formula F = Kx is no longer valid.
Calculation:Maximum speed is at equilibrium where:
F = kx ⇒x =F/k
Now, F x=1/2mv²+1/2kx²
Solving we get,
V=F/√mk=Vmax
To learn more about force constant visit:
brainly.com/question/15170479
#SPJ4
Use the parallax formula to calculate the distance to each of the following stars. Give your answers in both parsecs and light-years.
Part A
Alpha Centauri: parallax angle 0.7420''.
Express your answer using four significant figures.
Part C
Procyon: parallax angle of 0.2860''. UNITS: pc
Express your answer using four significant figures.
Part D
convert part C to light years
Express your answer using four significant figures.
The parallax formula is used to calculate the distance to a star based on the parallax angle, which is the angle between a star's position in the sky when observed from two points in the Earth's orbit six months apart.
What is distance ?
Distance is the measure of how far apart two objects or points are. It is typically measured in units such as meters, kilometers, miles, or light years. Distance can also be measured in terms of time, such as the time it takes to travel from one point to another.
Distance can either be measured directly, by measuring the physical gap between two points, or indirectly, by using a map, compass, or other navigation tool.
Part A
Distance = 1/0.7420 = 1.3481 parsecs
Distance = 1.3481 * 3.26156 = 4.39 light-years
Part C
Distance = 1/0.2860 = 3.4984 parsecs
Part D
Distance = 3.4984 * 3.26156 = 11.39 light-years
The parallax formula is used to calculate the distance to a star based on the parallax angle, which is the angle between a star's position in the sky when observed from two points in the Earth's orbit six months apart. The formula is simply distance = 1/parallax angle. For both parts A and C, the answer is first given in parsecs and then converted to light-years using the conversion factor of 3.26156 light-years per parsec.
To learn about more distance .
https://brainly.com/question/26550516
#SPJ4
This problem contains several examples of this.Consider an object sliding on a frictionless ramp as depicted here. (Figure 1) The object is already moving along the ramp toward position 2 when it is at position 1. The following questions concern the direction of the object's acceleration vector a_vec. In this problem, you should find the direction of the acceleration vector by drawing the velocity vector at two points near to the position you are asked about. Note that since the object moves along the track, its velocity vector at a point will be tangent to the track at that point. The acceleration vector will point in the same direction as the vector difference of the two velocities.
Which direction best approximates the direction of a_vec when the object is at position 2?
a. straight up b. upward to the right c. straight down d. downward to the right
This problem contains several examples of this.Consider an object sliding on a ramp as depicted here.Downward to the right.
What is the sliding ?
Sliding is a type of motion that involves the movement of an object relative to a surface while keeping contact with it. This type of motion is often used in everyday activities such as walking, running, and skiing. Sliding can also refer to the movement of two or more objects in contact with each other, such as a car door sliding open or a sheet of paper sliding across a table. In physics, sliding is considered to be a type of frictional motion, in which the frictional force between the object and the surface it is sliding on causes the object to move.
To learn more about sliding
https://brainly.com/question/17140804
#SPJ4
Classify these (x,y) coordinate pairs as a source point or a field point. Drag the appropriate items to their respective bins. the numbers in the picture are: (6,0) (0,8) (0,0) (0,-8)
The classification of the points in the picture of electric charges on a coordinate plane are;
Source points; (0, 8)c field is thr, (0, 0), (0, -8)Field poinrt; (6, 0)What is an electric field?An elecric field is the region or field which surrounds an electric charge, The value of an electric field is the force per unit charge within the field.
The specified points on the picture of the charges on the coordinate plane are;
(6, 0), (0, 8), (0, 0), (0, -8)
The location of the charges in the picture are;
Coordinates of the location of the charge, q₁ = (0, 8)
The coordinates of the location of the charge, q₂ = (0, 0)
Coordinates of the location of the charge, q₃ = (0, -8)
Coordinates of the location of the point, P = (6, 0)
A source point is the location of a source of electric charge, such as the charges, q₁, q₂ and q₃
The source points are locarted along tnhe y-axis, therefore, the source point are;
(0, 8), (0, 0), and (0, -8)
A field in physics is a region associated with a physical quantity, such as an electric or magnetic field, where the effect of the electric or magnetic field is experienced or felt
The field point is a point located away from the source point, The field point is a point where the effect of the field from the source is felt.
The field point is the point P(6, 0), that is located away from the charges, q₁, q₂, and q₃
Learn more about charges and electric field? https://brainly.com/question/14837739
#SPJ1
Seismic-wave velocity can change (increase or decrease) as the waves pass through different rock types.
Yes, seismic-wave velocity can change as the waves pass through different rock types.
Rocks with high porosity and permeability tend to have lower seismic-wave velocities because the pores contain fluid that can dampen the energy of the seismic waves, while rocks with high compaction and densities tend to have higher seismic-wave velocities. Additionally, changes in temperature and pressure can also affect seismic-wave velocity.
What are seismic sounders?Seismic sounders are seismic instruments that use a wide range of sound frequencies to measure the Earth's subsurface structure, composition, and its response to seismic waves generated from a source.
They are used in the exploration of oil, gas and mineral resources and for investigating earthquake and volcanic processes.
Learn more about seismic sounders:
https://brainly.com/question/15073818
#SPJ4
What theorem is presented based on the structure of the baseball field?
Pythagorean Theorem to determine the gap between second base and home plate.
Explain the pythagorean theorem.The Pythagorean theorem and the coordinates of the two locations are used in the distance formula to determine the distance between them. The formula below can be used to determine the length of AB if A and B make up the hypotenuse of a right triangle: Leg2 plus Leg2 equals Hypotenuse 2.
measured from the middle of the backstop to the apex of home plate. Place second base in centre by drawing a line from the backstop's centre point over the pitcher's mound, through the apex. The distance that needs to be measured is between the centre of second base and the top of home plate.
The square root of (a,c)2 + (b,d)2 is used to calculate the distance between the points (a,b) and (c,d). The distance between points (a, b, c) and (d, e, f) in three dimensions is equal to the square root of (a, d), (b, e), and (c, f).
To learn more about Pythagoras theorem visit:
brainly.com/question/343682
#SPJ4
What is the linear diameter (in meters) of an object that has an angular diameter of 25 arcseconds and a distance of 65 km
The linear diameter of an object with an angular diameter of 25 arcseconds and a distance of 65 km will be 0.067 meters.
Linear Diameter = (Angular Diameter ×Distance) / 206264.81.
In this case, the linear diameter would be 0.067 meters.
To put this into context, a linear diameter of 0.067 meters is approximately equal to 6.7 centimeters, or 2.6 inches. To put this another way, it is approximately the size of a large grape. As such, it is incredibly small and would be difficult to see with the eye.
Therefore the linear diameter of the object is 0.067 meters
Learn more about l diameter:
https://brainly.com/question/29270581
#SPJ4
Sputnik I was launched into orbit around Earth in 1957. It had a perigee (the closest approach to Earth, measured from Earth's center) of 6.41 x 10^6 m and an apogee (the furthest point from Earth's center) of 7.13 x 10^6 m. What was its speed when it was at its perigee
In 1957, Sputnik I was propelled into orbit around the planet. Its speed when it was at its perigee was was approximately 7.935 x 10^3 m/s.
The speed of an object in orbit around Earth can be calculated using the vis-viva equation:
v = sqrt(GM/(r))
where v is the velocity of the object, G is the gravitational constant, M is the mass of the Earth, and r is the distance of the object from the center of the Earth.
Given the perigee distance of 6.41 x 10^6 m and the mass of the Earth being 5.972 x 10^24 kg, the velocity of Sputnik I at its perigee would be:
v = sqrt((6.67 x 10^-11 N*(m^2)/(kg^2) * (5.972 x 10^24 kg)) / (6.41 x 10^6 m))
v = 7.935 x 10^3 m/s
So, the speed of Sputnik I when it was at its perigee was approximately 7.935 x 10^3 m/s.
To know more about speed please refer: https://brainly.com/question/13608672
#SPJ4