kilometre is a multiple of metre why​

Answer:

2000pound

Explanation:

Manganese metal is produced from the manganese(III) oxide, Mn2O3, which is found in manganite, a manganese ore. The manganese is reduced from its +3 oxidation state in Mn2O3 to the zero oxidation state of the uncharged metal by reacting the Mn2O3 with a reducing agent such as aluminum or carbon. How many pounds of manganese are in 1.261 tons of Mn2O3? (1 ton = 2000 pounds)

About 40 different substances called organophosphorus compounds are registered in the United States as insecticides. They are considered less damaging to the environment than some other insecticides because they breakdown relatively rapidly in the environment. The first of these organophosphorus insecticides to be produced was tetraethyl pyrophosphate, TEPP, which is 33.11% carbon, 6.95% hydrogen, 38.59% oxygen, and 21.35% phosphorus. It has a molecular mass of 290.190.

A quantity can be converted from one unit of measurement to another while maintaining its value. There are 2522 pounds of manganese in 1.261 tons of [tex]\rm Mn_2O_3[/tex].

It is a fundamental idea that is applied in many different disciplines such as science, engineering, math and daily life. To complete a conversion, it is necessary to know the conversion factor – the numerical relationship between the two units of measurement. With the help of this factor, you are able to convert units while keeping the value constant.

To convert tons to pounds we need to know that 1 ton is equal to 2000 pounds.

Given that you have 1.261 tons of [tex]\rm Mn_2O_3[/tex], we can calculate the number of pounds as follows:

Number of pounds = 1.261 tons * 2000 pounds/ton

Number of pounds = 2522 pounds

Therefore, there are 2522 pounds of manganese in 1.261 tons of [tex]\rm Mn_2O_3[/tex].

Learn more about Conversion factors, here:

https://brainly.com/question/30567263

#SPJ3

Answer: I can’t explain how it impacts ionic bonding but I can tell you what ionization energy is.

Explanation:

ionization energy, also called ionization potential, in chemistry and physics, the amount of energy required to remove an electron from an isolated atom or molecule.

Answer: Molecules gain or lose energy during any temperature change, not just phase changes.

Explanation:

If you think of a  heating or cooling curve, even when there isn't a phase change, the kinetic energy of the particles is still changing.

Because:

Their roots are no longer in the soil. Thus, can't absorb water and mineral ions needed for plant growth via photosynthesis.

Hope this helps!

Answer:

Yes

Explanation:

Well this is because when a plant is planted water goes from the soil, into the roots then finally distributed to other parts of the plant.

So when plants have been plucked or uprooted water no longer has access to the plant which may result to the plant being dried up and will possibly die

The final temperature of the sample of gas is 689.65 Kelvin.

Relation between the temperature and pressure will be represented by the ideal gas equation PV = nRT, and for this question required equation is:

P₁/T₁ = P₂/T₂, where
P₁ & T₁ are the pressure and temperature of the initial sample.

P₂ & T₂ are the pressure and temperature of the final sample.

Pressure is in mmHg and on putting values from the question on the above equation, we get

T₂ = (810)(390.8) / (760) = 416.5 degree C = 689.65K

Hence required temperature of the sample is 689.65K.

To know more about ideal gas equation, visit the below link:
https://brainly.com/question/555495

#SPJ1

For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line, which shows first order reaction

A first-order reaction can be defined as a chemical reaction in which the reaction rate is linearly dependent on the concentration of only one reactant. In other words, a first-order reaction is a chemical reaction in which the rate varies based on the changes in the concentration of only one of the reactants

Every mole of SO₂Cl₂ that dissociates results in a mole of SO₂ &Cl₂

[tex]\rm P_{total}= P_{Cl_{2}\\}+ P_{SO_{2}Cl_{2}}+ P_{SO_{2}}\\\\ P_{total} = P_{o}- \beta +\beta + \beta\\\\ P_{total} = P_{o}+\beta[/tex]

For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line.

t(hr)           [tex]P_{SO_{2}Cl_{2}}[/tex]                            ln([tex]P_{SO_{2}Cl_{2}}[/tex] )

0                11.07                                  2.404

3                 7.35                                 1.995

6                4.88                                 1.585

9                3.24                                 1.176

12                2.15                                 0.765

15                1.43                                 0.358

β = P(total) - P(initial)

[tex]\rm P_{SO_{2}Cl_{2}}[/tex] = P₀ - β

for t= 3

β =3.72

and

[tex]\rm P_{SO_{2}Cl_{2}}[/tex] = 7.35

For first order plot of ln( [tex]P_{SO_{2}Cl_{2}}[/tex]) vs time will be a straight line, which shows first order reaction.

To know more about First order Reaction

https://brainly.com/question/2284525

#SPJ1

The question is Given:Gas×Temperature×Pressure

Gas=1400ml

Temperature=20.00K

Pressure=101.3kpa

140ml×20.00K×101.3 K Pa

total =6,00.00

and when the volume of temperature changed to 40.00 K and the pressure is changed to 50.65 kPa.

Solution will 40.00 K× 50.65 kPa

total of the changes is 200.

Convert temperature to Kelvin

Convert vol to L

Apply Charles law

Answer:

[tex]V_{1} = \text{400.0 mL}[/tex]

[tex]T_{1} = 225.0^{\circ}\text{C + 273.15 = 498.15 K}[/tex]

[tex]T_{2} = 127.0^{\circ}\text{C + 273.15 = 400.15 K}[/tex]

[tex]V_{2}[/tex]

[tex]\dfrac{V_{1}}{T_{1}} = \dfrac{V_{2}}{T_{2}}[/tex]

[tex]V_{2} = V_{1} \times \dfrac{T_{2}}{T_{1}}[/tex]

[tex]V_{2} = \text{400.0 mL} \times \dfrac{\text{400.15 K}}{\text{498.15 K}}[/tex]

[tex]\boxed{V_{2} = \text{321.3 mL}}[/tex]

Therefore, the volume of the gas at 127.0°C is 321.3 mL

[tex]\begin{gathered}\\\end{gathered}[/tex]

Ammonium lauryl sulfate has a molar mass of 283.43 g/mol.

Ammonium dodecyl sulfate is another name for it. It's in the shampoos we use on our hair. Both polar and non-polar solvents can dissolve it. It can irritate the skin at times.

Thus, the ammonium lauryl sulfate molar mass is 283.43 g/mol.

Learn more about Ammonium lauryl sulfate

https://brainly.com/question/27125444

#SPJ1

Answer:

See below

Explanation:

The large bar magnet is positioned with S on the Left

  the small magnet will position itself similar this with N on the right   S on the left   (opposites attract)

Answer:

compared to sodium, silicon has a higher ionization energy meaning it takes more energy to remove electrons.

Explanation:

hope this helps

can u please give me and Brainlist

Answer:

+ 47.68 Liter change in volume to final volume 129.68 L

Explanation:

P1V1/T1 = P2V2/T2     RE-ARRANGE TO:

P1V1/T1  * T2/P2  = V2         (T must be in Kelvin)

1.9 * 82 / (273.15 + 32.5)   *  (273.15-15.4)/ (770/760) = 129.68 L

129.68 - 82=47.68 L  change  

The answer is 0.46 ml of the original H₂S0₄ and dilute to a final volume of 100 ml.

Normality is a measure of concentration equal to the gram equivalent weight per liter of solution.

Normality = Number of gram equivalents × [volume of solution in litres]⁻¹

Preparing 100. ml of 0.1 N H₂S0₄

Eq. wt. of H₂S0₄ = 98/2=49

density of H₂S0₄= 1.08

Purity =98%

1 N H₂S0₄ = 49 gH₂S0₄ / liter

1  gm equiv wt /L x 1 gm equiv. wt / 2 = 98 / 2 = 49 g)

0.1 N H2SO4 = 4.9 g / L

To make 100 ml (0.100 L) we would need 4.9 [tex]\rm \frac{g}{L}[/tex] x 0.1 L

= 0.49 g H₂S0₄/100ml

Original density = 1.08 g / ml

with a purity of 98%,

this converts to 1.08 g x 0.98 = 1.058 g /ml

0.49 g H₂S0₄ x 1 ml / 1.058 g = 0.46 ml of original H₂S0₄needed

Therefore to make the desired solution

Take 0.46 ml of the original H₂S0₄ and dilute to a final volume of 100 ml.

To know more about Normality

https://brainly.com/question/9754178

#SPJ1

Answer:

answer in picture

Explanation:

The balanced chemical equation will be Ca + MgCl2 → CaCl2 + Mg.

An equation that has the same quantity of atoms on both sides of the arrow would be said to represent a balanced chemical reaction.

The given equation is Ca + MgCl2 →

It is known that when Ca is reacted with magnesium chloride ( MgCl2) then it will form calcium chloride (CaCl2 ) and magnesium.

Ca + MgCl2 → CaCl2 + Mg.

It can be seen that, calcium has one atom in the reactant side and one atom in product side. On the other hand, chlorine has one atom in reactant side as well as product side.

Hence, the reaction will be balanced.

To know more about balanced chemical reaction.

https://brainly.com/question/15052184

#SPJ3

Answer:

0.0734 grams LiOH

Explanation:

The molarity formula looks like this:

Molarity (M) = moles / volume (L)

You are given the molarity and volume (in mL). Therefore, you can plug these values into the equation and solve for moles (after you convert from mL to L).

25 mL / 1,000 = 0.025 L

0.125 M = moles / 0.025 L

(0.125 M) x (0.025 L) = moles

0.003125 = moles

After using the molarity formula, we know that 0.003125 moles LiOH are needed to satisfy these conditions. Now, we can convert this to grams using the molar mass of LiOH. This can be determined using the values from the periodic table. Remember to write your conversion in a way that allows for the units to cancel out.

Molar Mass (LiOH) = 6.941 g/mol + 16.00 g/mol + 1.008 g/mol

Molar Mass (LiOH) = 23.499 g/mol

0.003125 moles           23.499 g
------------------------   x   -------------------  =  0.0734 grams LiOH
                                        1 mole

0.074 grams of lithium hydroxide are needed to make 25 ml of 0.125 M solution, according to the concept of molar concentration.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Here , in the problem mass is to be determined, hence the formula used is the first one mentioned.

Substituting values in the formula,mass=molar concentration×molar mass×volume in liters

∴0.125×23.95×0.025=0.074 g.

Hence, 0.074 g of lithium hydroxide are required to prepare 25 ml of 0.125 M solution.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

Answer:

it’s 10ml

Explanation:

200/2 = 10

The following compounds create solutions that are listed below

A solution is a homogeneous mixture of one or more solutes dissolved in a solvent.

solvent: the substance in which a solute dissolves to produce a homogeneous mixture

solute: the substance that dissolves in a solvent to produce a homogeneous mixture

1. Nal and H₂O

It will form an ionic solution .

2. KBr and CH4

It will not form a solution

3. CO₂ and CF₄

It will not form a solution

4. LiCI and CCl₄

It will not form a solution

5. NH₃ and H₂O

It will also form a solution and liberate ions of ammonium

6.CO₂ and H₂O

It will form a solution named as carbonic acid

To know more about Solution

https://brainly.com/question/1616939

#SPJ1

Answer:

24 atm

Explanation:

From Boyle's Law :

Given values :

Solving

New volume

So apply Boyles law

Molar mass is the summation of the atomic mass of the individual atoms. The molar mass of KBr•7H₂O is 244.99.

Atomic mass or weight is the number of protons and neutrons in the atom of the individual element. The atomic masses are used to calculate the molar mass of the compound.

The compound KBr•7H₂O: 1 K + 1 Br + 14 H + 7O

Inserting the atomic masses of the individual atoms as:

= 1 (39.09) + 1 (79.90) + 14 (1.00) + 7(16)

= 39.09 + 79.90 + 14.00 + 112

= 244.99

Therefore, 244.99 is the molar mass of KBr•7H₂O.

Learn more about molar mass here:

https://brainly.com/question/13461285

#SPJ1

Answer:

rsghkm vumm

Explanation:

el correo de confirmación con la que se ha enviado desde correo ok recibido gracias saludos María del Ca

Answer: See attached image

Explanation:

The required formula of hydrate is MgSO₃.6H₂O.

The number of moles of water per mole of anhydrous solid (x) will be computed by dividing the number of moles of water by the number of moles of anhydrous solid (x) to find the hydrate's formula.

Moles will be calculated as:
n = W/M, where

Moles of MgSO₃ = 0.737g / 104.3g/mol = 0.007mol

Moles of H₂O = 0.763g / 18g/mol = 0.04 mol

Number of H₂O molecule = 0.04/0.007 = 5.7 = 6

So formula of hydrate is MgSO₃.6H₂O.

Hence required formula of hydrate compound is MgSO₃.6H₂O.

To know more about hydrate compound, visit the below link:

https://brainly.com/question/22411417

#SPJ1

Answer:

The answer is Erosion, Weathering,

Explanation:

These all seem to be correct but i know for a fact those two are correct.

Answer:

Liquid–liquid extraction

Explanation:

Answer:

it is a weak acid

acid

Explanation:

formaldehyde is a weak acid (pK greater than 13),

The weight of an object is defined as the force of gravity on the object and may be calculated as the mass times the acceleration of gravity, w = mg. Since the weight is a force, its SI unit is the newton.

W = mg

Weight of object = mass of object × acceleration of gravity

Explanation:

MgCl2(aq) + NaOH(aq) = Mg(OH)2(s) + NaCl. Both magnesium nitrate and sodium hydroxide solutions are colourless solutions. When they react with each other, a white precipitate (Mg(OH)2) and a colourless solution is given. Sodium chloride exists in the colourless aqueous solution.

The answer is CH₃-CH₂-CH₂-CH=CH₂ , Option C correctly represents the structural formula for pentene .

Any hydrocarbon containing one or more double bonds.

Alkenes are generally colorless non-polar compounds, somewhat similar to alkanes but more reactive.

The first few members of the series are gases or liquids at room temperature.

Pentenes are alkenes with the chemical formula C₅H₁₀.

Each contains one double bond within its molecular structure.

CH₃-CH₂-CH₂-CH=CH₂ , Option C correctly represents the structural formula for pentene .

To know more about pentene

https://brainly.com/question/16904715

#SPJ1

Grams are the unit of measurement of the mass or the weight of the substance. There are 1.17 gms of chlorine atoms in the sample.

The mass of the substance is the multiplication of the moles and the molar mass.

Barium chloride dissociates as:

BaCl₂ ⇄  Ba²⁺ + 2 Cl⁻

From the reaction, it can be said that 1 mole of barium chloride dissociates into 1-mole barium ion and 2 moles of chloride ions.

Moles of barium chloride are calculated as:

Moles = mass ÷ molar mass

= 3.45 gm ÷ 208.23 g/mol

= 0.016 moles

If 1 mole of Barium chloride has 2 moles then 0.016 moles of the sample will have, 0.0331 moles of chloride ions.

The mass of chlorine atoms is calculated as:

Mass = moles × molar mass

= 0.0331 × 35.45

= 1.17 gms

Therefore, 1.17 gms of chlorine atoms are present in barium chloride.

Learn more about mass here:

https://brainly.com/question/9406646

#SPJ1