Light - emitting diode lightbulbs known as LED lightbulbs are energy saving lightbulbs. They consume very small amount of energy compare to other lightbulbs. Therefore, LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.
There are varieties of different light bulbs. some of them are incandescent, compact fluorescent (CFL), halogen, and light-emitting diode (LED) to mention a few.
Before the advent of light - emitting diode (LED) bulbs, some of the bulbs consume a lot of energy. For instance, we have incandescent bulbs of 20 watts, 50 watts, 100 watts and even 200 watts.
But with the advent of light - emitting diode (LED) bulbs, consumers can save energy because light - emitting diode (LED) bulbs save a lot of energy and they are very bright.
We can therefore conclude that light - emitting diode lightbulbs known as LED lightbulbs are the most energy efficient way to light your home, as they use about ten percent (10%) of the energy of a comparable compact fluorescent bulb.
Learn more here: https://brainly.com/question/13423221
What is the best reason astronomers have come up with to explain why sunspots are cooler and look darker
Answer:
Sunspots are places where the strong magnetic fields in the Sun resist the upward motion of bubbling hot gases from underneath
Explanation:
ASAP
A truck is speeding up (with a constant acceleration) from rest to 45 m/s and it takes it 15 seconds to do so. How far will the car travel?
Answer:
675 KM
Explanation:
hAVE A NICE DAY
A car takes 9 m to stop after the driver applies the brakes.
The brakes exert a force of 2000 N.
Calculate how much work is done by this force.
Depends upon how soon you want to stop. You know the mass of the car, you know the initial velocity of 8.9 m/s. You know the final velocity which is zero. You can now calculate the deceleration of the car if you know how soon you want to stop.
Let's say you want to stop in one second.
a = (vf - vi) / t = - 8.9 m/s^2 (negative sign indicates deceleration).
F = ma = 800 x 8.9 = 7120 Newtons (kg*m/s^2)
Anna used a rock to drive a peg into the ground to put up her tent. If the rock applied a 9. 5 N force in 0. 50 s, what is the impulse on the peg? 4. 8 N • s 9. 5 N • s 10 N • s 19 N • s.
Answer:
4.8 N*s
Explanation:
P = F*t
P = Impulse/ momentum
F = force (Newtons)
t = time (seconds)
P = 9.5N*0.5s
P = 4.75 N*s
Hi there!
[tex]\large\boxed{I = 4.8 N}[/tex]
Impulse = Force (N) × Time (s)
We can also express this as:
I = Δp = Ft
Plug in the given values:
I = 9.5(.50) = 4.75 ≈ 4.8 Ns
when a single star with a mass equal to the sun dies, it will become a
When a single star with a mass equal to the sun dies, it will become a: white dwarf.
A star is a giant celestial (astronomical) object which comprises a luminous sphere of plasma bounded together by its own gravitational force.
A single star can be defined as a type of star that moves through space alone.
Generally, a star is mainly composed of two (2) hot gases and these are:
I. Hydrogen (H).
II. Helium (He).
Based on Astronomy, when a star runs out of hydrogen, depending on its mass, it would either turn into any of the following:
A planetary nebula.A supernova.A white dwarf.Similarly, when a single star with a mass equal to the sun dies, it will turn into a white dwarf.
Read more: https://brainly.com/question/17934476
Name some devices we use to make measurements
Answer:
Explanation:
Ruler. A steel ruler aids the measurement and layout of straight lines. The ruler, also called "straightedge" or "straight-edged ruler," is a long, thin strip of wood, metal or plastic marked with increments of measurement.
Measuring Tape. The modern measuring tape's roughly palm-sized casing contains a coiled strip of metal marked with increments of measurement. The metal strip, called "tape," attaches to a spring which automatically retracts the tape into the casing following use.
Walking Tape Measure. The walking tape measure, also called "surveyor's measure," records the distance traveled by a wheel. An operator pushes the measure's wheel, similar to a bicycle wheel, by a handle as an attached ticker box displays feet or meters in the same format as a car's odometer.
Laser Measure. The laser measure offers point and shoot distance measurement. In its most basic form, a laser measure is a hand-held electronic device with a digital display.
Is a football tackle an elastic or inelastic collision and why?
A: elastic, because momentum is conserved
B: inelastic, because kinetic energy is conserved
C: inelastic, because momentum is not conserved
D: inelastic, because kinetic energy is not conserved
If the kinetic energy of an object changes, then the collision is considered inelastic. This is regardless of whether the objects sticks together or not.
My best answer for this question would be D) inelastic, because kinetic energy is not conserved.
We can tell from the collision that it is not elastic.
Momentum is is conserved, it transfers to the other player.
Kinetic energy is not conserved, at it turns into internal friction.
I hope this helps! :)
A football tackle is an inelastic collision , because kinetic energy is not conserved.
What is collision?When two bodies or particles move towards enough to interact with each other it is called the particles or the bodies are colliding.
What are the types of collision?Elastic collisioninelastic collisionWhat is an elastic collision?In this type of collision , there is no loss of kinetic energy.The momentum and kinetic energy both are conserved.What is an inelastic collision?in this type of collision , there is a loss of kinetic energy.The momentum of the system is conserved but the kinetic energy is not conserved .So, when the football tackles it's kinetic energy changes.
Thus, A football tackle is an inelastic collision , because kinetic energy is not conserved.
Learn more examples about an Inelastic collision here -
https://brainly.com/question/24915434
#SPJ2
How can you find a springs constant for the F=-Kx formula?
Answer:
As per the Hooke's Law, if spring is stretched, the force exerted is proportional to the increase in length from the equilibrium length. The formula to calculate the spring constant is as follows: k= -F/x, where k is the spring constant. F is the force and x is the change in spring's length.
A balloon with a volume of 2. 0 L at 25°C is placed in a hot room at 35°C. The pressure on the balloon is constant at 1. 0 atm. How does the volume of the balloon change after moving it to the hot room?.
Answer:
25A°C=2L
35A°C=? More
=35/25×2L
=7/5×2L
=14L/5
=2.8L
A 4.6 kg bucket of water is raised from a well by a rope. The acceleration of gravity is 9.8 m/s 2 . If the upward acceleration of the bucket is 3 m/s 2 , find the force exerted by the rope on the bucket. Use g
Hi there!
If we sum the forces acting on the bucket:
∑F = T (upward) - Mg (downward)
Thus:
ma = T - mg
We can rearrange for T:
ma + mg = T
Plug in the given values:
4.6(3 + 9.8) = T = 58.88 N
A change of state, such as boiling, is an example of a chemical change. True or False?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The given statement is false, change in state is considered as a physical chance because the state can be regained by using physical methods ~
for example boiling causes water to evaporate (converted into gaseous state) , but it can gain the liquid form again by Condensation ~
Answer:
False
Explanation:
This is False because boiling is not included in the chemical category.
Boiling is a PHYSICAL change, a chemical change is one or more substances combine or break apart to form new substances.
To learn more, read from the passage above the questions!
Hope this helped!!
Hi can u help with my hw
Answer:
Journey A average speed is 19.86 meters per second
Journey B average speed is 13.68 meters per second
Explanation:
The average speed is defined as the distance divided by the time, so that's what we have to do. But first, let's convert the time in seconds and the distance in meters, because we have to answer in meters per second:
Journey A:
2 hours = 120 minutes. Each minute have 60 seconds, so 120•60= 7200 seconds.
143 km = 143000 meters
143000/7200 = 19.86 m/s
Journey B:
3 hours = 180 minutes + 15 minutes = 195 minutes
195•60 = 11700 seconds
160 km = 160000 meters
160000/11700 = 13.68 m/s
please solve due is today....asap please
Answer:
a)object is in uniform motion
Explanation:
velocity is constant.and a=0
body is in uniform motion.
BRAINLIST PLS
Consider the schematic of the molecule shown, with two hydrogen atoms, H, bonded to an oxygen atom, O. The angle between the two bonds is 106°. If the bond length r = 0.103 nm long, locate the center of mass of the molecule. The mass mH of the hydrogen atom is 1.008 u, and the mass mO of the oxygen atom is 15.9999 u. (Use a coordinate system centered in the oxygen atom, with the x-axis to the right and the y-axis upward. Give the coordinates of the center of mass in nm.)
The definition of the center of mass allows to find the result for the position of the mass center of more than the H₂O molecule is;
[tex]x_{cm} = 0 \ and \ y_{cm} = 6.9 10^{-3 } nm[/tex]
the concept of center of mass of a system is the point where external forces are applied, it is given by the expression
[tex]\frac{x}{y} =\frac{1}{M_{total}} \sum m_i r_i[/tex]
Where M is the total mass of the systemr_i and m_i sums the position and masses of the element i of the system
In the attachment we have a diagram of the system where the axis and coordinates of the molecules are shown, in this case it is indicated that the origin is in the oxygen atom, so its distance is zero.
[tex]r_{cm} = \frac{1}{2 m + M} \ (2 m r )[/tex] )
They indicate the mass of the hydrogen atom m = 1.008 amu, the bond length r = 0.103 nm and there is an angle 106º between the two hydrogens, therefore the angle from the vertical is:
θ = 106/2 = 53º
Let's find the position of the center of mass for each axis.
x-axis
[tex]x_{cm} = \frac{1}{2m+ M} \ ( m x_1 - m x_2)[/tex]
y-axis
[tex]y_{cm} = \frac{1}{2m + M} \ ( m y_1 + m_2)[/tex]
Let's use trigonometry to find the components of the bond length.
cos θ = [tex]\frac{y}{L}[/tex]
sin θ = [tex]\frac{x}{L}[/tex]
y = L cos θ
x = L sin θ
We substitute.
[tex]x_{cm} = \frac{1}{2m+M} \ (mL (sin 53 + sin (-53)) \\y_{cm} = \frac{1}{2m + M} \ ( mL cos 53 + mL sin 53)[/tex]
we use.
sin θ = - sin -θ
cos θ = cos -θ
Let's calculate.
[tex]x_{cm} = 0 \\y_{cm} = \frac{1}{2 \ 1.008 + 15.9999} \ ( 2 \ 1.008 \ 0.103 cos 53)[/tex]
We see that the center of mass is on the x axis and at a distance from the y-axis of 6.9 10-3 nm
In conclusion using the definition of the center of mass we can find the result for the position of the center of mass of the H₂O molecule is;
[tex]x_{cm}=0[/tex] and [tex]y_{cm}[/tex]cm = 6.9 10⁻³ nm
Learn more here: brainly.com/question/8662931
1 Loudness and pitch are two important properties of a musical sound.
a If a musician plays a softer note, which property has been changed,
loudness or pitch?
b If the musician makes the note lower, which property has been
changed, loudness or pitch?
Please slove this i need answer fast
Answer:
I am not quite sure....
Explanation:
Explanation:
basically i, say the answer is w
The table shows the diameters of the planets in our solar system. Assume that a basketball whose diameter is 25
centimeters represents the planet Jupiter. Find the scale (ratio) between Jupiter and the basketball. Then use this ratio to
find the scaled diameter of the other planets. Enter these numbers into the table. (Saturn has been done for you.) Finally,
choose a real-world spherical or nearly spherical object that matches the scaled diameter of each planet.
Saturn is shown as an example. To find what Saturn's size would be after adjusting it to scale, follow these steps. Let the
scaled diameter of Saturn be d centimeters. If Jupiter's diameter, 142,984 kilometers, is scaled to 25 centimeters, Saturn's
diameter of 120,536 kilometers will be scaled to about 21 centimeters:
120,536
d
120,536x25
142,984
d ~ 21 cm
Use this process to complete the table.
142,984
25
Answer:
Mercury:
.85
pea
Venus:
2.1
gumball
Earth:
2.2
gumball
Mars:
1.2
marble
Uranus:
9
grapefruit
Neptune:
8.6
softball
Explanation:
I have no clue if I'm right but hopefully, I am
PLEASE PLEASE PLEASE HELP ME!!!
Answer: Levers
Explanation: Levers lifte
the machines arm
a device that converts mechanical energy into electricity is a
Answer:
An electric generator is a device that converts a form of energy into electricity.
Explanation:
If a car is at rest, which of the following is correct?
A.not enough information
B.more than 3 forces are acting on the car
C.no force acts on the car
D.The net force on the car is zero
Answer:
D
Unbalanced or net forces acting on the car will cause it to move
The correct answer is option D. The net force on the car is zero.
What forces act on a car at rest?
Since the car is not accelerating, the force of air resistance and the friction force must add to give the exact opposite of the applied force. The net force here would be zero, as well.
When an object is at rest no gravitational force is acting on it?Newton's First Law is the law of inertia. An object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity.
Learn more about Newton's First Law here: https://brainly.com/question/11472821
#SPJ2
calculate the relative density of a block having dimension 4m x 3m x 2m given its mass in 48000g
Answer:
in the picture
Explanation:
CARRY ON LEARNING
in an rfid system, where would the unique data identifying an item typically be found?
In a radio frequency identification (RFID) system, the unique data identifying an item are typically found in: tags.
What is an RFID system?
RFID is an acronym for radio frequency identification.
A RFID system can be defined as an automatic, wireless, identification technology (device) that is typically designed to allow end users store and retrieve information, especially through the use of an electromagnetic field.
The operational benefits of an RFID system:
Generally, a radio frequency identification (RFID) system is used for the following:
1. To identify an item or individual.
2. To trace and tracking an item or individual.
3. To track an item or individual.
The components of an RFID system:
An RFID system is a wireless, identification technology (device) that comprises two (2) main components and these are:
ReadersTagsTags refer to small objects containing an antenna and a chip (smart barcodes) that are used to automatically identify an item or individual they are embedded in or attached to.
In conclusion, the unique data that are used in identifying an item are typically found in tags.
Read more on RFID tags here: https://brainly.com/question/24167692
If the velocity is 50 and the time is 5 seconds what is the acceleration?
Just divide the both, you will get the answer!
does it sound rude?
im sorry for that!
Answer:
10
Explanation:
Select the correct answer.
When rocks containing copper are oxidized, they tend to turn from red to green. Based on this information, what evidence
would best support the theory that oxidation could not have occurred in Earth's early atmosphere?
Rocks from early Earth that contained copper are green in color.
There are no copper-containing rocks from early Earth.
Rocks from early Earth that contained copper are red in color.
All copper minerals were converted to iron minerals.
Answer:
Rocks from early Earth that contained copper are red in color
Explanation:
"Copper, a red mineral, reacts with oxygen to form a green-colored compound. In early years, rocks containing copper were red. This fact shows that there was no oxygen in the early atmosphere to oxidize red copper into the green-colored compound."
Four landing sites are proposed for a lander. Data about the sites are listed in the table. A 3 column table with 4 rows. The first column is labeled landing site with entries W, X, Y, Z. The second column is labeled height above surface in meters with entries 32, 16, 35, 12. The last column is labeled acceleration due to gravity in meters per second squared with entries 1. 6, 3. 7, 1. 6, 3. 7. At which landing site would the lander have the greatest amount of gravitational potential energy? W X Y Z.
Answer:
its B just finished
Explanation:
Answer:
The answer above is correct! The correct option is B.
Explanation:
Just took the review on edge :)
Hope this helped - brainliest would be appreciated!
Have a great day everyone :D
A 10 kg box is motionless on the floor. If the coefficient of static friction is 0.4 and the coefficient of kinetic friction is 0.3 (between the box and the floor), find the force required to start the block in motion
Please I need help ❤️
The force required to start the block in motion is equal to 39.2 Newton.
Given the following data:
Mass of box = 10 kgCoefficient of static friction = 0.4 Coefficient of kinetic friction = 0.3To determine the force required to start the block in motion:
Note: The force that is required to start the block in motion must be greater than or equal to the force of static friction.
Mathematically, the force of static friction is given by the formula;
[tex]Fs = uFn = umg[/tex]
Where;
Fs represents the force of static friction.μ represents the coefficient of friction.[tex]F_n[/tex] represents the normal force.g is the acceleration due to gravity.m is the mass of an object.Substituting the given parameters into the formula, we have;
[tex]F_s = 0.4 \times 10 \times 9.8\\\\F_s = 4 \times 9.8\\\\F_s = 39.2\;Newton[/tex]
Read more on force of static friction here: https://brainly.com/question/25686958
a person would weigh less on Mercury than on planet blank because blank
Answer:
Earth because of greater gravity
In both experiments, what accounts for the change in pressure you observed as you changed the volume of the gas
Answer: When a gas is in a smaller volume, the molecules are more confined and bump into the walls of the flask more, thereby exerting a greater pressure.
Explanation:
The drone can fly for 25 minutes before the battery needs recharging. the power output of the battery is 65.0 watts. calculate the maximum energy stored by the battery
help please!! needed asap!!
Answer:
stored Energy = Power x time = 65 x 25x 60 = 105.6 Kjoules
A 12 N force is used to extend a spring with a spring constant of 84 N/m. Calculate the extension of the spring.
Answer:
72n
Explanation: