Light from the Sun takes about 8.0 min to reach Earth. How far away is the Sun? Answer in scientific notation

Answers

Answer 1
z = 149.4 million km.
Explanation:
z = c * t
if you know the time that light takes to reach us then you can calculate the distance to that object and vice versa.
In the above equation,

z is the distance to the object.
t is the time light takes from the object to reach us

c is the speed of light which is always constant about 300,000 km/ sec.
The time light takes to reach us from the Sun is about 8.3 minutes.

z = 8.3 * 300,000

Note that the speed of light is in units of km/ sec so we will have to convert minutes into seconds.
1 minute = 60 seconds

8.3 minutes = 8.3 * 60

8.3 minutes = 498 seconds.

z = 498 * 3

z = 149400000 km

OR

z = 149.4 million km

Hope it helps!

Related Questions

A country is deciding what to do about pollution glven off by power plants.
Which of the following is an example of how science can be used to make
this decision?
O A. Scientists own most of the power plants in the United States.
O B. Scientists can measure how much pollution is given off
O C. Scientists know what kind of power plants people want.
OD. Scientists are allowed to pass laws about pollution

Answers

Answer:

option B is the correct answer

Explanation:

please follow me and Mark me brainliest please

what is the ratio of the average distances that oxygen will diffuse in a given time in air and water

Answers

Okay thanks babe I’m so sorry babe I’m so

Croquet ball A moving at 8.3 m/s makes a head on collision with ball B of equal mass and initially at rest. Immediately after the collision ball B moves forward at 6.4 m/s .

What fraction of the initial kinetic energy is lost in the collision?

Answers

Answer:

0.25

Explanation:

That is the right answer.

The fraction of the initial kinetic energy is lost in the collision is 35.3%.

The given parameters:

Initial velocity of ball A = 8.3 m/sInitial velocity of ball B = 0Final velocity of ball B = 6.4 m/s

The initial kinetic energy of the system collision is calculated as follows;

[tex]K.E_i = \frac{1}{2} mv_1_i^2 + \frac{1}{2} mv_2_i^2\\\\K.E_i = \frac{1}{2} (m)(8.3)^2 + \frac{1}{2} (m) (0)^2\\\\K.E_i = 34.445 m[/tex]

The final velocity of ball A after collision is calculated as follows;

[tex]u_1 + v_1 = u_2 + v_2\\\\8.3 + v_1 = 0 + 6.4\\\\v_1 = 6.4 - 8.3\\\\v_1 = -1.9 \ m/s[/tex]

The final kinetic energy of the system after collision is calculated as follows;

[tex]K.E_f = \frac{1}{2} m(-1.9)^2 + \frac{1}{2} m(6.4)^2\\\\K.E_f = 22.285 \ m \[/tex]

The fraction of the initial kinetic energy is lost in the collision is calculated as follows;

[tex]= \frac{K_i - K_f}{K_i} \\\\= \frac{34.445 - 22.285}{34.445} \\\\= 0.353\\\\= 35.3\%[/tex]

Learn more about kinetic energy of elastic collision here: https://brainly.com/question/7694106

can someone help me answer this question? A student connected an ammeter as shown in this picture. Did the student connect the ammeter correctly? Explain

Answers

Answer:

No - It is connected in parallel instead of series

Explanation:

The answer is No, the reason behind the answer that the ammeter is connected in parallel which is wrong it must be connected in series.

What is Ammeter?

An ammeter is a device for detecting electric current in amperes, either directly (DC) or alternating (AC). Due to the fact that a shunt running parallel to the meter carries the majority of the electricity at high current values, the digital multimeter can measure a wide range of current values. A circle with the capital A in it serves as the icon for an ammeter for circuit diagrams.

The moving coil of the electrodynamics ammeter rotates in the field created by the fixed coil. It measures alternating and direct current with 0.1 to 0.25 percentage points (by converting Ac power To DC power using a rectifier).

The ammeter is connected in series and, on the other hand, the voltmeter is connected in parallel.

To know more about Ammeter:

https://brainly.com/question/18404570

#SPJ2

In the popular game "Angry Birds" (refer Figure), for the red bird to hit the green bird with their range 55.0 m, what should be the launch angle (with respect to the horizontal) of the slingshot if the time of flight is 2.50 s? ​

Answers

Answer:

Explanation:

What are we to use as gravity in this imaginary world? I will ASSUME 9.81 m/s² and assume no air resistance.

horizontal velocity component

vx = 55.0/2.50 = 22 m/s

vertical initial velocity component

(12.0 - 10.0) = 0 + vy₀(2.50) + ½(-9.81)2.50²

vy₀ = 13.0625 m/s

θ = arctan(vy₀/vx) = arctan(13.0625/22) = 30.6997225... = 30.7°

which of the following statements describes a perfectly inelastic collision

Answers

Answer: An ice hockey player picks up a trophy as he slides past it.

Two pool balls colliding precisely inelastically and rebounding off one another is an example. So, the correct option is A.

What is an Inelastic collision?

Inelastic collisions are those in which the total kinetic energy is lower after the impact than it was before. The stick is travelling quickly in the direction of the ball before to the contact. The stick comes to a stop following the accident. It transfers some of its kinetic energy to the cue ball, which rolls forward.

The type of collision mentioned in the given example is known as an inelastic collision is one in which the system's momentum is preserved but its kinetic energy is not. In a ballistic pendulum, an example of an inelastic collision. Dropped ball of clay is another illustration of an inelastic collision.

Thus, the correct option is A.

Learn more about Inelastic collision, here:

https://brainly.com/question/15742157

#SPJ7

Your question is incomplete, most probably the complete question is:

Which of the following statements describes a perfectly inelastic collision?

A. Two billiard balls bounce off of each other,

B. A car crashes into a tree and rebounds in the other direction,

C. A wad of chewing gum is thrown and sticks to a moving truck,

D. Two ice skaters hit each other and fall over in opposite directions,

A mass is placed at the end of a spring. It has starting velocity of V & allowed to oscillate freely. If the mass has a starting velocity of 2V, what would the period be? Half as long, remains constant, 1/4 as long , 4 times as long, or 2 times as long?

Answers

Answer:

Equation for SHM can be written

V = w A cos w t        where w is the angular frequency and the velocity is a                                         maximum at t = 0

V1 = w1  A cos w1 t

V2 = w2 A cos w2 t

V2 / V1 = w2 / w1     since cos X t = 1 if t = zero

V2 / V1 = 2 pi f2 / (2 pi f1) = f2 / f1 = T1 / T2

If the velocity is twice as large the period will be 1/2 long

Which light is most sensitive to the eyes?

Answers

Answer:

Our eyes are most sensitive to the wavelengths corresponding to the yellow and green colors of the spectrum. Flashy signs and some fire engines are painted in a yellowish-green color to attract our attention.

The less dense areas created as a sound wave propagates are called
A. rarefactions✅
B. troughs
C. crests
D. compressions

Answers

Answer:

C. crests

don't trust me though

Answer:

The less dense areas created as a sound wave propagates are called rarefactions.

Explanation:

Hoped this helped.

A load of 250 kg is hung by a crane's cable. The load is pulled by a horizontal force such that the cable makes a 30 angle to the vertical plane. If the load is in the equilibrium, calculate the magnitude of the tension in the cable​

Answers

Answer:

1250[tex]\sqrt{3}[/tex]

Explanation:

Let's look at this in a simple manner, because it is.

The crane weights 250Kg. Okay.

Since it is hung, there is the acceleration of gravity being applied on it (10m/s²)

Since F = m * a

F = 250 * 10

F = 2500

Now we know that the downward Force is 2500N.

To find the force that is being applied on that 30° angle, we can multiply our 2500N by cos30°, which happens to be [tex]\frac{\sqrt{3}}{2}[/tex].

Therefore, the force pulling the box in the cable's direction is:

[tex]\frac{2500\sqrt{3} }{2} = 1250\sqrt{3}[/tex]

If you have any questions feel free to comment.

Have a great one and mark brainliest if it helped, please

Students are asked to create roller coasters for marbles. Their goal is to design a coaster with the tallest possible hill that a marble released from a height of 1.5 m (meters) can clear. The marbles will experience some air resistance and friction as
they move.

What should the students keep in mind as they build their designs?

a)The hill can be taller than 1.5 m (meters), because the marble will be moving faster than its initial velocity allowing it to travel higher than its release height.

b)The hill can be taller than 1.5 m (meters), because the marble will gain mechanical energy as it moves allowing it to travel higher than its release height.

c)The hill should be a little less than 1.5 m (meters) high, because the marble will lose mechanical energy as it moves, preventing it from reaching its release
height.

d)The hill can be exactly 1.5 m (meters) high, because mechanical energy is always
conserved allowing the marble to travel to its release height.

Answers

Answer:

Kinetic Energy.

Explanation:

The movement of a roller coaster is accomplished by the conversion of potential energy to kinetic energy. The roller coaster cars gain potential energy as they are pulled to the top of the first hill. As the cars descend the potential energy is converted to kinetic energy.

Since the marble will loose mechanical energy, the hill should be a little less than 1.5 m (meters) high.

A roller coaster is used to demonstrate the conversion of mechanical energy. In a roller coaster, potential energy is converted to a kinetic energy hence it conveniently serves as a device for demonstrating energy conversions.

As the students make their design, they must bear in mind that the hill should be a little less than 1.5 m (meters) high, because the marble will lose mechanical energy as it moves, preventing it from reaching its release

height.

Learn more: https://brainly.com/question/24381583

A 120 V fish-tank heater is rated at 130W. Calculate (a) the current through the heater when it is operating, and (b) its resistance

Answers

Explanation:

The power P dissipated by a heater is defined as

[tex]P = VI[/tex]

where V is the voltage and I is the current.

a) The current running through a 130-W heater is

[tex]I = \dfrac{P}{V} = \dfrac{130\:\text{W}}{120\:\text{V}} = 1.08\:\text{A}[/tex]

b) The resistance R of the heater is

[tex]P = VI = (IR)I = I^2R[/tex]

where [tex]V= IR[/tex] is our familiar Ohm's Law.

[tex]\Rightarrow R = \dfrac{P}{I^2} = \dfrac{130\:\text{W}}{(1.08\:\text{A})^2}[/tex]

[tex]R = 110.8\:Ω[/tex]

The current running through the heater when it is operating is 1.08 A.

The resistance of the heater is 110.8 ohm.

What is current?A current is a flow of Charges.The formula of current is , current I = power P / voltage VThe SI unit of current is ampere A.

So, from the above equation we can calculate,

              current I = P/V

                      ∴   I = 130 / 120

                      ∴   I = 1.08 A

What is resistance?The resistance is a quantity which oppose the current flow in a circuit.The formula of resistance is ( in the terms of power P and ohm's law V=IR )  resistance R = P/I^2.The SI unit of resistance is ohm.

So, from the equation we can calculate,

                   Resistance R = P/I^2

                                  ∴  R = 130/(1.08)^2

                                  ∴  R = 110.8 ohm

Thus, the current running through the heater when it is operating is 1.08 A.

The resistance of the heater is 110.8 ohm.

Learn more about resistance and resistivity here -

https://brainly.com/question/13735984

#SPJ2

                       

What are the three factors discussed in our live session that can lead to success through challenging physical activities:

Talent, flexibility, and stamina


Strength, balance, and endurance


Knowledge, attitude, and fitness level


Attitude, motivation, and determination

Answers

Answer:

Attitude, motivation and determination

Explanation:

Let me know if I'm right.

The factors leading to the success through the challenging physical activities are Attitude, motivation and determination.

Although the information regarding the live session is not mentioned, but as a general point of view, the major factors that need to considered while undergoing through the challenging physical activities are as follows:

Attitude - Attitude is one of the major factor leading to the management of challenges. A positive attitude always creates a base to face the initials of physical activities.Motivation - Motivation is another aspect that needs to be considered while undergoing the physical activities. Motivation comes from some sort of positive words from a specific person, thereby reducing the changes of poor start.Determination - The half battle is conquered with self-determination, a highly determined person is always has an add-on advantage for the task that he/she is going to start.

Thus, we can conclude that the factors leading to the success through the challenging physical activities are Attitude, motivation and determination.

Learn more about the factors affecting the success here:

https://brainly.com/question/13958968

At a distance of 1 cm from the source, the flux from the isotropic source is one hundred times brighter. Which source is brighter fifty centimeters away

Answers

Answer:

op

Explanation:

At a distance of 1 cm from the source, the flux from the isotropic source is one hundred times brighter. Which source is brighter fifty centimeters away

A 500 kg cart is rolling to the right at 1.3 m/s. a 60 kg man is standing on the right end of the cart. what is the speed of the cart if tha man suddenly starts running to the left with a speed 10.0 m/s relative to the cart

Answers

Answer:

P1 = 1.3 (500 + 60) = 728 kg-m      total momentum to right at start

P2 = (v2 - 10) 60 + 500 v2

total momentum after running at -10 with respect to cart = 728 where v2 is the new speed of the cart

728 = 560 v2 - 600

v2 = 1328 / 560 = 2.37 m/s    new speed of cart

Check:

After:    p2 for cart = 500 * 2.37 = 1186

p1 for man = (2.37 - 10) * 60 = -458

P2 = p1 + p2 = 728       total momentum unchanged

An empty plastic or glass dish being removed from a microwave oven is cool to the touch. How can this be possible

Answers

Plastic and glass are both poor heat conductors. They are insulators which means their electrons don’t move as freely as conductors.

You throw an 8.75 g coin straight up into the air. The coin travels a distance of 337 cm upward. What was the initial speed of the coin when you released it

Answers

Answer:

hi

Explanation:

i like saying hi

2. An auditorium has 58 seats in the first row, 62 seats in the second row, 66 seats in the third row, and so
on.
a)Find the explicit formula of this arithmetic sequence.

B) find the number of seats in the twentieth row.

Answers

The answer is (a) hope it helped!<3






PLZ HELPPPP!!

this question is about popping microwave popcorn:

If you turn the microwave on for two minutes, is the rate of popping always the same, or does it change? Explain.

Answers

No,the poping of microvave is not same there time is different

Explain different layers of atmosphere and the pressure in each layer. Draw diagram​

Answers

Answer:

Our atmosphere has five different layers. They are:

1. Troposphere: This is the most important layer of the atmosphere with an average height of 13 km from the earth. It is in this layer that we find the air that we breathe. Almost all the weather phenomena such as rainfall, fog and hailstorm occur here.

2. Stratosphere: This layer extends up to a height of 50 km. It presents the most ideal condition for flying airplanes. It contains a layer of ozone gas which protects us from the harmful effect of the sun rays.

3. Mesosphere: This layer extends up to a height of 80 km. Meteorites bum up in this layer on entering from the space.

4. Thermosphere: In this layer, the temperature rises very rapidly with increasing height. The ionosphere is a part of this layer. It extends between 80-400 km. This layer helps in radio transmission. Radio waves transmitted from the earth the reflected back to the earth by this layer.

5. Exosphere: It is the uppermost layer where there is very thin air. Light gases such as helium and hydrogen float into space from here.

i need help with these please

Answers

Answer:

                             

Explanation:

Help please..
Kepler’s third law states that:
A. the orbits of the planets are elliptical.
B. the planets move slower when they are closer to the Sun and faster when they are farther from the Sun.
C. the square of the ratio of the periods of any two planets revolving around the Sun is equal to the cube of the ratio of their average distance from the Sun.
D. objects attract other objects with a force that is directly proportional to the product of their masses, and inversely proportional to the square of the distance between them.

Answers

Answer:

c

Explanation:

In a thermodynamic process, the internal energy of a system in a container with adiabatic walls decreases by 800 J. Which statement is correct

Answers

The correct statement is, the system performed 800 J of work on its surroundings.

The given parameters:

change in internal energy, ΔU = 800 J

Apply first law of thermodynamics;

ΔU = Q + W

where;

Q is the heat gainedW is the work done on the system by the surrounding

In adiabatic process no heat is gained or lost by the system.

Q = 0

ΔU = W  (work is positive when it is done on the system by its surrounding)

If work is done by the system to the surrounding, the new equation becomes;

ΔU = - W

W = - ΔU

W  = -800 J

This implies that the system performed 800 J of work on its surroundings.

"Your question is not complete, it seems to be missing the following information";

In a thermodynamic process, the internal energy of a system in a container with adiabatic walls decreases by 800 J. Which statement is correct?

a. The system lost 800 J by heat transfer to its surroundings.

b. The system gained 800 J by heat transfer from its surroundings.

c. The system performed 800 J of work on its surroundings.

d. The surroundings performed 800 J of work on the system.

e. The 800 J of work done by the system was equal to the 800 J of heat transferred to the system from its surroundings.

Learn more about first law of thermodynamics here: https://brainly.com/question/20335201

Why should people pay attention to scientists when making decisions?
A. Scientists are always correct.
B. Sclentists are the smartest people.
C. Scientists make the best decisions.
D. Scientists back up their statements with facts.

Answers

Answer:

D. Scientist back up their statements with facts.

Explanation:

The majority of the laws, theorems and thesis are base on with experiments. The follow different strategies for confirm the hypothesis with facts, one of the most famous models is the scientific method. That is a way of proof something in a trustworthy.

In the image is the resume about this method (graphical organizer).

Describe all the ways a bicyclist can accelerate

Answers

There are three ways an object can accelerate: a change in velocity, a change in direction, or a change in both velocity and direction.

Suppose the student in (Figure 1) is 68kg, and the board being stood on has a 12kg mass. What is the reading on the left scale? What is the reading on the right scale?

Answers

The equilibrium conditions allow to find the results for the balance forces are:

F₁ = 225.4 N F₂ = 558.6 N

When the acceleration is zero we have the equilibrium conditions for both linear and rotational motion.

            ∑ F = 0

            ∑ τ = 0

           

Where F are the forces and τ the torques.

The torque  is the product of the force and the perpendicular distance to the point of support,

The free-body diagrams are diagrams of the forces without the details of the bodies, see attached for the free-body diagram of the system.

We write the translational equilibrium condition.

           F₁ - W₁ - W₂ + F₂ = 0

We write the equation for the rotational motion, set our point of origin at scale 1, and the counterclockwise turns are positive.

         F₂ 2 - W₁ 1 - W₂ 1.5 = 0[tex]\frac{W_1 \ 1 + W_2 \ 1.5}{2}[/tex]

Let's calculate F₂

         F₂ = [tex]\frac{W_1 \ 1 + W_2 \ 1.5 }{2}[/tex]  

         F₂ = (m g + M g 1.5)/ 2

         F₂ = [tex]\frac{(12 + 68 \ 1.5 ) \ 9.8}{2}[/tex]  

         F₂ = 558.6 N

We substitute in the translational equilibrium equation.

         F₁ = W₁ + W₂ - F₂

         F₁ = (m + M) g - F₂

         F₁ = (12 +68) 9.8 - 558.6

         F₁ = 225.4 N

In conclusion using the equilibrium conditions we can find the forces of the balance are:

F₁ = 225.4 N F2 = 558.6 N

Learn more here:  brainly.com/question/12830892

Over half the global population faces a shortage of clean water. Which example is a point source water pollutant? pesticide run-off from farmers’ fields a sewer pipe draining directly into a river road oil washing into sewer drains, and eventually reaching waterways erosion from a denuded slope after a heavy rainfall

Answers

An example of a point source water pollutant is a sewer pipe draining directly into a river.

According to the United States Environmental Protection Agency, a  point source pollution is defined as;  “any single identifiable source of pollution from which pollutants are discharged, such as a pipe, ditch, ship or factory smokestack.”

Hence, an example of a point source water pollutant is a sewer pipe draining directly into a river. The pollution is coming from an easily identifiable source which is a sewer pipe connected to a river directly.

Learn more: https://brainly.com/question/17638582

a An object is tarown up with a velocity v = 6.02 +7.0j. Calculate the (1) time taken reach the maximum height (ii) the horizontal range (s = 10m/s2). ​

Answers

Answer:

(i) 0.6s (ii) 8.42m

Explanation:

U² = 6.02² + 7²

U = 9.23

angle of projection

tanø = 6.02/7

ø = 40.7

Time of fligt

t = Usinø/g

t = 9.23 sin 40.7/10

t = 0.6

H range = U²sin2ø/g

H = 9.23²sin 81.4/10

H = 8.42m

The time taken reach the maximum height is 0.6s and the horizontal range is 8.42m.

What is Velocity?

Velocity ​​is defined as the directional motion of an object which is indicated by the rate of change of position as observed from a particular frame of reference. It is measured by a particular standard of time. It is a vector quantity as it has both magnitude and direction.

It can be expressed as:

v= d/t

Where. v is the velocity in m/s

d is the displacement measured in meter 'm'

t is the time measured in seconds 's'

For above given information,

v = 6.02 +7.0j, so the initial velocity will be u

u² = 6.02² + 7²

u = 9.23m/s

Angle of projection, tanø = 6.02/7

ø = 40.7

Time taken=  t = u sinø/g

t = 9.23 sin 40.7/10

t = 0.6s

Horizontal range  = u²sin2ø/g

H = 9.23²sin 81.4/10

H = 8.42m

Thus, the time taken reach the maximum height is 0.6s and the horizontal range is 8.42m.

Learn more about Velocity, here:

https://brainly.com/question/11679227

#SPJ2

5) You pull a 10.0 kg wagon along a flat road. You exert a force of 80.0 N at an angle of 30.0 degrees above the horizontal while you move the wagon 10.0 m forward. The coefficient of friction between the wagon and road is 0.500. Calculate the work down by you and the work done by friction.

Answers

Consult the attached free body diagram. The only forces doing work on the wagon are the frictional force opposing the wagon's motion and the horizontal component of the applied force.

By Newton's second law, the net vertical force is

• ∑ F [v] = n + (80.0 N) sin(30.0°) - mg = 0

where a is the acceleration of the wagon.

Solve for n (the magnitude of the normal force) :

n = (10.0 kg) g - (80.0 N) sin(30.0°) = 58.0 N

Then

f = 0.500 (58.0 N) = 29.0 N

Meanwhile, the horizontal component of the applied force has magnitude

(80.0 N) cos(30.0°) ≈ 69.3 N

Now calculate the work done by either force.

• friction: -(29.0 N) (10.0 m) = -290. J

• pull: (69.3 N) (10.0 m) = 693 J

A car of mass 5000 kg was initially moving at 100 km/h and stops at a distance of 55 m. Find the
magnitude of the net force (in N) acting to stop the car.

Answers

Answer:

 |F| = 35 kN

Explanation:

a = F/m

100 km/hr(1000 m/km / 3600 s/hr) = 27.8 m/s

v² = u² + 2as

   a = (v² - u²) / 2s

F/m = (v² - u²) / 2s

   F = m(v² - u²) / 2s

   F = 5000(0² - 27.8²) / 2(55)

   F = - 35,072.9517...

Other Questions
Read the argument below and give three reasons to support this argumentYour local school board is thinking about adopting a policy to go back to SMOD dress. You want to convince the school board to vote against this idea. Evidence 1Evidence 2Evidence 3Its your thinking Using your outline and the materials youve gathered, write a 500- to 750-word paper using word processing software. Be sure to proofread and revise your writing to catch any errors in grammar, spelling, logic, or organization. Add a works cited page at the end to give credit to your sources. Submit your completed paper along with this activity to your teacher for evaluation.please do it based off of Werner Heisenberg the scientist. Linear or nonlinear: why? One strategy for making your point compelling is to include as many statistics as possible. a. True b. False Imma need a really quick answer im on a real tight clock Given trapezoid WXYZ, what is XY? Write the number 0.000 000 7 in standard form. Help me please i beg you please A marble is launched at by dropping it through a marble launcher. The marble took 0.22s to land 0.31m fromwhere it was launched. Find the horizontal velocity of the marble as it rolls off the table.A. 1.4m/sB. 0.53m/sC. 0.71 m/sD. 0.07m/s Simplify the expression. Write your answer as a power. (4)^5(4)^7 4. Suppose you are the receptionist for an immunologist. Your physician hands you a lab request slipfor a test to determine the levels of immunoglobulins present in a patient's blood. You are to verifythat all the information is correct before you submit the request. What is the name of this test? Why is the consumption of dietary supplements considered risky? A gas has a volume of 3.7 liters with a pressure of 1.75 atm. What is the pressure of the gas if its volume is raised to 4.5 L? PLS HELP !!!A bus journey from a town to a city takes 2 hour 38 minutes.complete the timetable opposite belowTIMETABLE: (I tried to type it)Depart : Arrive :a) 05 00 ______b) 07 20 ______c) _____ 11 18d) _____ 13 36e) 15 45 _____f) 18 22 _____g) _____ 21 17h) _____ 23 25I'll mark as branliest if u answer :)) Anwser this Please Thank you According to survey results from over 60,000 people in more than 50 countries who were asked to rank a series of 19 work goals, the top-ranking goal for professional technical personnel from various countries is _____. Multiple Choice training security autonomy benefits what are the mean variacne and standard deviatioon of the values? round to the nerates tenth. 11,11,3,1,11 How does the radius of a string affect centripetal force. 6. do Full body scan, Part II. The table below summarizes a data set we first encounteredin Exercise 6.32 regarding views on full-body scans and political affiliation. The differences ineach political group may be due to chance. Complete the following computations under the nullhypothesis of independence between an individual's party affiliation and his support of full-bodyscans. It may be useful to first add on an extra column for row totals before proceeding with thecomputations.Party AffiliationRepublican Democrat IndependentShould264299351Answer Should not385577Don't know/No answer 161522Total318369450(a) How many Republicans would you expect to not support the use of full-body scans?(b) How many Democrats would you expect to support the use of full-body scans?(c) How many Independents would you expect to not know or not answer? What was the goal of the new deal? How did these programs help Roosevelt achieve that