The temperatures of the gases will not be equal as oxygen gas will have a higher temperature than hydrogen gas because it has fewer moles overall.
Briefing :The mechanical behavior of ideal gases is described by the ideal gas law. It has the ability to compute the volume of gases created or absorbed.
This equation is frequently used in chemical equations to convert between volumes and molar quantities.
According to the ideal gas law, there is a relationship between gas pressure, temperature, and volume.
PV = nRT
V is the same for both
So,
T is same for both.
When n increases, T decreases, so since n for hydrogen gas is 1 and n for oxygen gas is 0.5, it follows that oxygen gas will have a higher temperature than hydrogen gas because it has fewer moles overall.
To know more about ideal gases :
https://brainly.com/question/15962335
#SPJ9
How are liquid volume measured? In other words, what are the SI units for liquid volume?
We can measure the volume of a liquid by using the graduated cylinder and the SI unit which is used for the liquid volume is cubic meter (m3).
How can we measure the volume of liquid?Simply we can find or measure the volume of a liquid by using either a graduated cylinder or with the help of the burette. As this is clear from the name of the graduated cylinder is that cylinder in which we can measure the volume of a liquid. The graduated cylinder is sealed from one end and opened from the other side. The scales are also drawn on the graduated cylinder for finding the values.
The SI unit which is used for the liquid volume is called a cubic meter (m3). It is a derived unit. Liter (L) is a special name for the cubic decimeter (dm3). The symbol for the liter is the uppercase letter “ell” (L) is desired to keep away from the danger of misunderstanding among the lowercase letter “ell” (l) and the number one (1).
So we can conclude that graduated cylinder is used for measuring the volume of a liquid and the liquid volume is cubic meter (m3).
Learn more about Volume here: https://brainly.com/question/12410983
#SPJ1
4. What mass of magnesium oxide is formed when 96 g of magnesium reacts with
oxygen?
2Mg + O₂ → 2MgO
Answer:
The mass of MgO formed is 160g
Explanation:
please rate as brainliest
compare and contrast the arrangements of particles at the atomic level for a liquid and a solid
The arrangements of particles at the atomic level for a liquid and a solid are compared as the particles in gas do not follow any specific order and are uniformly spaced out.
There is no regular arrangement of liquids next to one another. The solids are regularly arranged and closely packed. Since liquid particles are more dispersed than solid ones, they take on the shape of their container rather than having a distinct shape yet having a distinct volume. Because solid particles are more closely packed together and certain solids even have atomic-level particle patterns, they have a distinct shape that does not alter unless the solid changes state.
The arrangement of the particles in a liquid is more haphazard than that of the particles in a solid. But since they are closely packed, the atoms of solids and liquids are comparable.
Learn to know more about atomic level of liquid on
https://brainly.com/question/12816944
#SPJ1
Which of these is the source of the energy that plant cells use for photosynthesis?
Choose the correct answer.
Responses
radiant energy from the sun
radiant energy from the sun
kinetic energy from the wind
kinetic energy from the wind
potential energy from the soil
potential energy from the soil
mechanical energy from animals
Radiant Energy from the sun is the source of the energy that plant cells use for photosynthesis. The first response is the correct answer.
Nearly all of the energy on Earth comes from the sun. Through a process known as photosynthesis, it enables plants and other organisms to convert water and carbon dioxide into sugars.
The function of sunlight in photosynthesis is to supply energy. Heat and light are two different types of energy that the sun emits.
Chlorophyll can capture energy, which can then be converted into sugar during photosynthesis. Photosynthesis slows down when a plant receives insufficient sunlight. This implies that the plant's energy source—sugar—might not be getting to it in sufficient amounts. We can clearly see how crucial sunlight is to life.
To learn more about photosynthesis, refer to the answer below:
https://brainly.com/question/19160081
#SPJ1
"The higher the temperature of a gas at constant volume, the greater is its * 10 points
pressure." Which of the following kinetic-molecular explanations of this
principle is NOT correct?
O Molecules move faster at higher temperatures.
The number of molecular impacts per unit area decreases at a higher temperature.
The average kinetic energy of molecules is greater at a higher temperature.
O
The average momentum and rate of molecular collisions is greater at a higher
temperature.
The option that shows that the kinetic-molecular explanations of this principle is NOT correct is option B: The number of molecular impacts per unit area decreases at a higher temperature.
What is the kinetic-molecular theory?The assumption that matter is made up of microscopic particles that are always in motion forms the foundation of the kinetic-molecular theory, which explains the states of matter.
Therefore, based on the use of observable characteristics as well as the use of behaviors of solids, liquids, as well as gases are known to be explained by kinetic-molecular theory.
Learn more about kinetic-molecular theory from
https://brainly.com/question/11232625
#SPJ1
Which of the following is an example of a heterogeneous mixture? *
a teaspoon of sucrose
a gold ring
a handful of pebbles
O a pot of salted pasta water
A pot of salted pasta water is an example of a heterogeneous mixture.
Heterogenous mixture :If a mixture's composition varies over the course of the mixture, it is said to be heterogeneous. Vegetable soup is a complex concoction. The proportions of the different vegetables and other ingredients will vary from mouthful to mouthful. Mixtures that contain two or more phases are said to be heterogeneous. Examples include ice cubes in a beverage, sand and water, and salt and oil.
What is a homogeneous mixture?A homogenous mixture is one whose composition is constant across the entire mixture. Because the soluble salt is distributed evenly throughout the whole salt water sample, the salt water described above is homogenous.
To know more about ingredients :
https://brainly.com/question/26532763
#SPJ9
independent variable and dependent variable
states with a larger population have more seats in the house of representative
Answer
Explanation:
Give the names of all of the above acids
1.What are the key components represented in the model shown in Figure 2?
2.What relationships are shown in the Figure 2 model?
1. The key component represented in the model is the Reflection of light.
2. Bouncing back of light relationships are shown in the Figure 2 model.
Reflection is when mild bounces off an item. If the surface is smooth and bright, like glass, water or polished metal, the light will reflect at the same angle as it hit the floor. This is known as specular reflection. light reflects from a clean floor on the same angle as it hits the floor.
In line with the law of reflection, the attitude of prevalence equals the perspective of reflection. To view an image of an object in a mirror, you should sight alongside a line at the photo area.
Reflection is the bouncing back of light while it moves a easy surface. Refraction is the bending of light rays whilst it travels from one medium to some other.
Learn more about Reflection here:- https://brainly.com/question/26655381
#SPJ1
In the first reaction of the citric acid cycle, oxaloacetate, which contains blank______ carbons, is combined with acetyl-coa, which contains blank______ carbons in its acetyl group, to produce citric acid, which contains blank______ carbons.
Four-carbon, four-carbon, four-carbon molecule.
What is citric acid cycle?In eukaryotes, the citric acid cycle occurs in the matrix of mitochondria, as does the conversion of pyruvate to acetyl-CoA. In prokaryotes, these two steps occur in the cytoplasm. The citric acid cycle is a closed loop; the last part of the pathway re-forms the molecule used in the first step. There are eight main steps in the cycle.
In the first step of the cycle, acetyl-CoA combines with a four-carbon acceptor molecule, oxaloacetate, to form a six-carbon molecule called citrate. After a rapid rearrangement, this six-carbon molecule releases two of its carbons as carbon dioxide molecules in two similar reactions, each time releasing a molecule of NADH.
Start superscript, 1, end superscript. The enzymes that catalyze these reactions are important regulators of the citric acid cycle, speeding it up or slowing it down depending on the energy requirements of the cell^2 2
squared.
The remaining four-carbon molecule undergoes a series of further reactions that first produce a ATP molecule-or, in some cells, a similar molecule called GTP and then the electron carrier FAD to for_2FADH 2, start subscript, 2, end subscript, and finally generation of another NADH. This reaction sequence regenerates the starting molecule oxaloacetate, allowing the cycle to be repeated.
To learn more about citric acid cycle from the given link:
https://brainly.com/question/17089080
#SPJ9
If the density of an unknown liquid is 2.6g/mL, what is the mass of 800mL of the unknown liquid
in grams (g)?
The mass of unknown liquid is 2080g.
Let us take formula for calculating density
Density = [tex]\frac{mass}{volume }[/tex]
therefore , mass = [tex]density\times volume[/tex]
= [tex]2.6\times 800[/tex]
= 2080 g.
What is mass?The mass is a quantitative measure of inertia in physics, a fundamental property of all matter. It is actually the resistance that a body of matter offers to change its speed or position under the influence of a force. The greater the mass of the object, the smaller the change caused by the force applied to it. In the International System of Units (SI), the unit of mass is the kilogram, which is defined as Planck's constant, which is defined as Planck's constant, which is equal to 6.62607015 × 10–3 joules per second. One joule equals one kilogram times one square meter per second.
To learn more about mass, refer;
https://brainly.com/question/28704035
#SPJ13
when using a water-cooled condenser, the water should choose... the condenser. to make this happen, the water should flow in at the choose... and should flow out at the choose... .
When using a water-cooled condenser, the water should constantly move over the condenser. to make this happen, the water should flow in at the bottom part and should flow out at the top part.
Water cooled condenser is heat exchanger. it will removes heat from the refringent and transfer to the water running through. The advantages of this system is it is lasts year longer. it has higher heat transfer rate
Thus, When using a water-cooled condenser, the water should constantly move over the condenser. to make this happen, the water should flow in at the bottom part and should flow out at the top part.
To learn more about water cooled condenser here
https://brainly.com/question/14568643
#SPJ1
How does quantum theory relates to Nanoparticles in Medicine please provide as much info as possible need help ASAP
Certain metal-based nanoparticles have the potential to interact with the hydrogen peroxide found in every cell and change it into a hydroxyl radical that can enter the nucleus and cause DNA damage.
What purposes do nanoparticles serve?Scratch-resistant eyewear, crack-resistant paint, anti-graffiti coatings for walls, transparent sunscreen, stain-repellent fabrics, self-cleaning windows, and ceramic coatings for solar cells are all products made with nanoparticles today.
Where can one find nanoparticles?In addition to living matter, naturally produced nanoparticles can also be found in volcanic ash, ocean spray, fine sand, and dust (e.g. viruses). The diversity of synthetic nanoparticles is on par with that of its counterparts in nature, if not greater.
Are nanoparticles accepted by the FDA?The usage of nanoscale materials in medications, medical devices, biologics, cosmetics, and food is anticipated to rise significantly in the coming years, according to the FDA, which has already assessed and authorized a few nanotechnology-based items.
To Learn more About Nanoparticles, Refer:
https://brainly.com/question/11955521
#SPJ13
PLEASE I NEED HELP, BAD!
Rank the following three transitions in the hydrogen atom in terms of lowest to highest energy, wavelength, and frequency: 8 to3, 6 to 4, 2 to 1
The ranking of the transitions from lowest to highest energy, wavelength, and frequency is;
2 to 1 6 to 48 to 3What is a transition?From the Bohr model of the atom, we know that an electron in the hydrogen atom is able to absorb a photon move from a lower to a higher energy level. This is what we refer to as the excitation of the electron in the atom.
Now we also know that the spectrum of the hydrogen atom can be explained on the basis of the fact that electrons are able to move from a lower to a higher energy level and vice versa, the energy of each of the transition is dependent on the difference between the transition.
Learn more about Bohr model:https://brainly.com/question/3964366
#SPJ1
Iron(III) chloride, FeCl3, can be made by the reaction of iron with chlorine gas. How much iron, in grams, will be needed to completely react with 878.0 g of Cl2?
Have both the unbalanced and balanced chemical equations.
Explain how to find the molar mass of the compounds.
Explain how the balanced chemical equation is used to find the ratio of moles
Explain how many significant figures your answer needs to have.
The numerical answer
Answer:
I don't have how to do that in numerical figures
The amount of iron, in grams, that is needed to completely react with 878.0 g of [tex]Cl_2[/tex] would be 460.392 grams
Stoichiometric problemIron (III) chloride is produced by reacting iron with chlorine as follows:
[tex]Fe + Cl_2 --- > FeCl_3[/tex]
The balanced equation of the reaction goes thus:
[tex]2Fe + 3Cl_2 --- > 2FeCl_3[/tex]
The mole ratio of iron to chlorine is 2:3.
Recall that: mole = mass/molar mass
Molar mass of [tex]Cl_2[/tex] = 35.5 x 2
= 71 g/mol
Mole of 878.0 g [tex]Cl_2[/tex] = 878/71
= 12.3662 moles
From the mole ratio, the equivalent mole of Fe from 12.3662 moles [tex]Cl_2[/tex] will be:
12.3662 x 2/3 = 8.2441 moles
Mass of 8.2441 mole Fe = mole x molar mass
Molar mass of Fe = 55.845 g/mol
Mass of 8.2441 moles Fe = 8.2441 x 55.845
= 460.392 grams
The numbers in the final multiplication operation have 5 significant figures each. Thus, the significant figure of the final answer will also be 5.
in other words, the amount of iron needed to completely react with 878.0 g of [tex]Cl_2[/tex] is 460.392 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/15047541
#SPJ1
What is the Mass divided by Volume? And also what is the Density
suppose you have 50.0 ml of a solution of hcl of unknown concentration. you use a 0.10m solution of ca(oh)2 as titrant and it requires 13.5 ml of this titrant to reach the endpoint. what was the original ph of the unknown solution?
The pH value of the unknown solution that underwent titration was 1.27.
First, we write the balanced reaction equation between HCl and calcium hydroxide:
[tex]2HCl + Ca(OH)_{2}[/tex] → [tex]CaCl_{2} + 2H_{2}O[/tex]
So we know that 1 mole of calcium hydroxide reacts with 2 moles of HCl. We now calculate the amount of calcium hydroxide used in the titration:
c = n/V ⇒ n = V*c = 0.0135 L * 0.10 M = 0.00135 mol
The amount of HCl will be twice the amount of calcium hydroxide, so 2 * 0.00135 mol = 0.0027 mol.
We can now calculate the concentration of HCl in the original solution (and, because HCl is a strong monoprotic acid, the concentration of H+ ions will be equal to the concentration of HCl):
c = n/V = 0.0027 mol / 0.05 L = 0.054 M
pH value is a negative logarithm of concentration of H+ ions:
pH = -log0.054 = 1.27
You can learn more about pH values here:
brainly.com/question/28580519
#SPJ4
Which gas will need the slowest time to get out of a gas syringe?
The gas that will need the slowest time to get out of a gas syringe is helium.
Helium is the second lightest element, and it has a low boiling point of -456°C. As such, it will take longer than any other gas to escape from a gas syringe.
Helium is a noble gas and is less reactive than other gases, so it will not react with the needle as quickly. Helium also has low conductivity, which means it takes less energy to transport helium through an object than it does for other gases. In addition, helium is odorless and tasteless, so it won't create any unwanted odors or smells when you use it in your experiments.
To learn more about helium visit: https://brainly.com/question/1780577
convert 125.0g H2O to molecules
P4O10 + H2O —>
what are the products
Answer:
P4O10 + H2O → H3PO4
Explanation:
an atom of U-235 absorbs a neutron and produces an atom of Sb-123, four neutrons and an unknown nuclide, X. Write the decay equation to represent this reaction and identify the other nuclide, X, formed in this reaction
The decay equation to represent the nuclear fission reaction in which an atom of U-235 absorbs a neutron and produces an atom of Sb-123, four neutrons, and an unknown nuclide, X is given below:
²³⁵₉₂U + ¹₀n → ¹²³₅₁Sb + ¹⁰⁹₄₁X + 4 ¹₀n
The nuclide X is Niobium Nb-109.
What are nuclear reactions?Nuclear reactions are reactions that involve changes i the nuclear composition of the atom of elements involved in the reaction.
Nuclear reactions are of two types:
Nuclear fission - this involves the splitting of the nucleus of a heavy atom or large atoms into the nucleus of two or more lighter atoms.
Nuclear fusion - this is the process by which the nucleus of a heavy atom is produced as a result of the fusion or combination of the nucleus of atoms of two or more lighter elements.
The given reaction in which an atom of U-235 absorbs a neutron and produces an atom of Sb-123, four neutrons, and an unknown nuclide, X is an example of nuclear fission reaction.
The decay equation to represent this reaction and the other nuclide, X, formed in this reaction is given below:
²³⁵₉₂U + ¹₀n → ¹²³₅₁Sb + ¹⁰⁹₄₁X + 4 ¹₀n
The nuclide X is Niobium Nb-109.
Learn more about nuclear fission at: https://brainly.com/question/3631019
#SPJ1
The law of _____ states that the mass of the reactants will equal the mass of the products.
conservation of energy
conservation of mass
conservation of momentum
inertia
The law of conservation of mass states that the mass of the reactants will equal the mass of the products.
What is the law of conservation of mass?The law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction. For example, when wood burns, the mass of the soot, ashes, and gases equals the original mass of the charcoal and the oxygen when it first reacted. So the mass of the product equals the mass of the reactant.Physical and chemical changes can cause matter to transform into different forms, but no matter what happens, matter is always conserved. There is no creation or destruction of matter; the amount of matter is the same before and after the transformation.To learn more about : the law of conservation of mass
Ref : https://brainly.com/question/19038178
#jsp2
Are animal cells prokaryotic or eukaryotic .
Are plant cells prokaryotic or eukaryotic .
This is what I need answered
The question requires us to order the steps given in a way that they properly represent how to prepare and label a solution.
To prepare a solution from a solid solute, we must calculate the amount of solute and solvent necessary, weigh the mass of solute and add it to a proper flask, add enough water to prepare the solution (as previously calculated) and then correctly label the solution with its molarity.
Considering the steps given and the information above, and also taking into consideration that all possible answers allow only three steps, we can choose the following order:
1) "calculate and mass the number of grams of solute needed, add to flask" (V)
2) "add enough water to make the total necessary volume of solution" (VI)
3) "label the solution with the correct molarity" (I)
Therefore, this is the order of steps to prepare the solution: V - VI - I
The best option to answer this question is the third one (letter C).
the answer would be V,VI,I
Takisha conducted an experiment to determine the effect of salt on the boiling point of water. She measured the boiling points of 100 ml of water with salt added in 5 g increments. As a control, she also recorded the temperature of water with no salt added. What is the purpose of this control?.
The purpose of this control is that it provides a reference value for comparison while doing experiment.
Salt (NaCl) is a Non-volatile means that it does not evaporates readily when heated.
When a non-volatile substance is added to volatile substance. The boiling point of the volatile substance get increased. This phenomena is called elevation in boiling point (colligative property).
She has measured the temperature of the water with no salt added so that she could compare it with the temperature when salt is added in the water.
To know more Boiling Point in water, visit,
https://brainly.com/question/10565650
#SPJ9
larger rocks are broken down to form smaller rocks which over time, form the basis for soil.
true or false
Larger rocks are broken down to form smaller rocks which over time, form the basis for soil is True.
Weathering is the decomposition or dissolution of surface rocks and minerals. When rock is mined rock fragments and minerals are carried away through a process called erosion. Water acids salts plants animals and temperature changes are all factors in weathering and erosion.
The process of breaking down large rocks into smaller pieces and sand is called weathering. The process of breaking down large rocks into smaller pieces and sand is called weathering. Weathering is a term that describes the general process by which surface rocks break down into sediments, clays, soils, and dissolved substances in water. The weathering process usually begins when the crust is lifted by tectonic forces.
Learn more about Weathering here:-https://brainly.com/question/829782
#SPJ1
In the electrolysis of molten magnesium chloride, the overall reaction is: MgCl2(l) → Mg(s) + Cl2(g) (a) Write the half reactions, (b) identify which species is being oxidized and which is being reduced, and (c) calculate the minimum voltage needed to separate magnesium chloride into its elements.
In the electrolysis of molten magnesium chloride;
a. the half reactions are as follows:
Reduction half reaction: Mg²⁺ + 2 e⁻ → Mg (s)
Oxidation half reaction: 2 Cl (aq) → Cl₂ (g)
b. magnesium ion is reduced whereas chloride ion is oxidized.
c The minimum voltage required to separate magnesium chloride into its elements is 386000 C of electricity.
What is electrolysis?Electrolysis is the decomposition of a substance known as an electrolyte when an electric current is passed through a solution or molten form of the substance.
During electrolysis, oxidation and reduction reactions occur that can be split into half equations.
In the electrolysis of molten magnesium chloride, the overall reaction is given below:
MgCl₂ (l) → Mg (s) + Cl₂(g)
a. The half reactions are as follows:
Reduction half reaction: Mg²⁺ + 2 e⁻ → Mg (s)
Oxidation half reaction: 2 Cl (aq) → Cl₂ (g)
b. Based on the half equations given above, the magnesium ion is reduced as it accepts two electrons to become a neutral magnesium atom. Chloride ion is oxidized as two chloride ions lose two electrons to become chlorine gas.
c The minimum voltage required to separate magnesium chloride into its elements is determined from the moles of electrons involved in the reaction.
Magnesium ion and chloride ions require two moles of electrons each to become the neutral element. Thus, 4 moles of electrons are required.
4 moles of electrons = 4 * 96500 C of electricity
4 moles of electrons = 386000 C of electricity.
Learn more about electrolysis at: https://brainly.com/question/276473
#SPJ1
Two objects have the same total thermal energy. They are different sizes. are they at the same temperature ? Explan.
No, they won't be at the same temperature because a larger object needs to be at a lower temperature than a smaller object in order for them to have the same total amount of thermal energy.
Definitions and examples of thermal energy:Thermal energy can be seen in the boiling of water on a stove. When a substance's atoms and molecules vibrate more quickly as a result of a rise in temperature, thermal energy is created.
How does thermal energy function?Although thermal energy doesn't exert force in the sense of a push or a pull, it does produce particle movement in an item or system. When high thermal energy particles come into contact with another object, they cause the object to move more and perform work as a result.
To know more about Thermal energy visit:
https://brainly.com/question/11278589
#SPJ13
Calculate the mass in kilograms for
204 mol BrCl3
The molar mass of Br is 79.904 grams/mole and the molar mass of Cl is 35.453 grams/mole.
There are 3 Cl atoms so we'll multiply it's molar mass by 3. So:
35.453 x 3 = 106.359
Now we add this number to the molar mass of Br and we get:
106.359 + 79.904 = 186.263
The molar mass of BrCl3 is 186.263 grams/mole
Now we just multiply this number by the amount of moles in the question which is 204.
186.263 x 204 = 37997.652 g which is 37.997652 kg or 38.0 kg if significant figures are important.
Under conditions of extreme heat and pressure, sedimentary rock can transform into metamorphic rock. True or false?
Answer:
Sedimentary rocks like bituminous coal, limestone, and sandstone, given enough heat and pressure, can turn into nonfoliated metamorphic rocks like anthracite coal, marble, and quartzite. Nonfoliated rocks can also form by metamorphism, which happens when magma comes in contact with the surrounding rock
Explanation: THEREFORE I'D SAY TRUE!
what is the hybridization about a central atom that has three total electron groups, with two of those being bonding groups and one being a lone pair?
The shape becomes bent V-shaped AND, molecular geometry is a triangular planar shape.
In the hybridization model, the number of hybrid orbitals used by the central atom is the same as the number of electron groups around the central atom. Thus, 2 electron groups (linear) = sp hybridization
If there are only three total electron groups, holding the place where two of those are bonding groups and one is a lone pair. then the shape becomes bent V-shaped, 2 bonds and 1 lone pair the shape is bent. For sp² hybridized central atoms the only possible molecular geometry is a triangular planar shape.
To learn more about triangular planar visit:
https://brainly.com/question/995422
#SPJ4