Methane reacts with chlorine to produce methyl chloride and hydrogen chloride. Once formed, the methyl chloride may undergo further chlorination to form methylene chloride (CH2Cl2), chloroform, and carbon tetrachloride. A methyl chloride production process consists of a reactor, a condenser, a distillation column, and an absorption column. A gas stream containing 80.0 mole% methane and the balance chlorine is fed to the reactor. In the reactor a single-pass chlorine conversion of essentially 100% is attained, the mole ratio of methyl chloride to methylene chloride in the product is 5:1, and negligible amounts of chloroform and carbon tetrachloride are formed. The product stream flows to the condenser. Two streams emerge from the condenser: the liquid condensate, which contains essentially all of the methyl chloride and methylene chloride in the reactor effluent, and a gas containing the methane and hydrogen chloride. The condensate goes to the distillation column in which the two component species are separated. The gas leaving the condenser flows to the absorption column where it contacts an aqueous solution. The solution absorbs essentially all of the HCl and none of the CH4CH4 in the feed. The liquid leaving the absorber is pumped elsewhere in the plant for further processing, and the methane is recycled to join the fresh feed to the process (a mixture of methane and chlorine). The combined stream is the feed to the reactor.

Required:
a. Choose a quantity of the reactor feed as a basis of calculation, draw and label a flowchart, and determine the degrees of freedom for the overall process and each single unit and stream mixing point. Then write in order the equations you would use to calculate the molar flow rate and molar composition of the fresh feed, the rate at which HCl must be removed in the absorber, the methyl chloride production rate, and the molar flow rate of the recycle stream. Do no calculations.
b. Calculate the quantities specified in Part (a), either manually or with an equation-solving program.
c. What molar flow rates and compositions of the fresh feed and the recycle stream are required to achieve a methyl chloride production rate of 1000 kg/h?

Answers

Answer 1
Your gonna half to space this out in order for me to answer if you don’t mind. I’ll answer in the comments

Related Questions

Which of these rules are applicable for naming covalent compounds?

Answers

Do u have a picture or anything so I can answer

pleaseeeee helpppp!!!!!!

Answers

No thanks but your welcome pizza man

Answer:

90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u

1.25 mol naoh (s) dissolves in water

Answers

huh? what’s the question?

Which of the following safety devices ensures that electricity will flow through it when flowing "downhill" instead of through people? A. Surge protectors B. Electric generators C. Ground wires D. Special plugs for high-current devices​

Answers

Answer:

Ground Wires

Explanation:

 

Phosphoric acid is neutralized by potassium hydroxide according to the following reaction:
KOH (aq) + H3PO4 (aq) → K3PO4 (aq) + H2O (1)
What is the concentration of a phosphoric acid solution if 25.0 mL are exactly neutralized by 20.0 mL of 2.000 M KOH solution?

Answers

Balance the reaction first:

3KOH + H3PO4 —> K3PO4 + 3H2O

So for every mol of H3PO4, you need 3 mol of OH- to fully neutralize the acid, since H3PO4 is polyprotic.

0.0200 L KOH • (2.000 mol KOH / L KOH) • (1 mol H3PO4 / 3 mol KOH) = 0.0133 mol H3PO4

Divide this by the volume of H3PO4 to get the concentration.

0.0133 mol H3PO4 / 0.0250 L = 0.532 M H3PO4

Why glucose does not give positive result with iodine test but not starch?

Answers

Answer:

This is a physical test. A chemical test for starch is to add iodine solution (yellow/brown) and look for a colour change. In the presence of starch, iodine turns a blue/black colour. ... Benedict's reagent will give a positive test result for glucose but not for starch.

Explanation:

please give me brainlist and follow

Answer:Amylose in starch is responsible for the formation of a deep blue color in the presence of iodine. The iodine molecule slips inside of the amylose coil.

Explanation:This makes a linear triiodide ion complex with is soluble that slips into the coil of the starch causing an intense blue-black colo

Did a chemical reaction occur while the candle was burning?

Answers

Answer: yes

Explanation:

What 3 parts of the water cycle are a result of gravity?

Answers

Answer:

Hey mate.....

Explanation:

This is ur answer......

While sunlight is the energy source, the greatest force propelling the water cycle is gravity. Gravity is the force of attraction between two objects, and Earth's gravity pulls matter downward, toward its center. It pulls precipitation down from clouds and pulls water downhill. Gravity also moves air and ocean water.

Hope it helps!

mark me brainliest plz.....

Follow me!! :)

A mystery element has 18 protons. Which one of the following statements is true about the element?
o
A. The element belongs in row 2 of the periodic table and is classified as a halogen.
O
B. The element belongs in row 3 of the periodic table and is classified as a noble gas.
O
C. The element belongs in row 4 of the periodic table and is classified as an alkali metal.
D. The element belongs in row 5 of the periodic table and is classified as an alkaline earth metal.

Answers

Answer:

B

Explanation:

Elements in a group are determined by the number of valence electrons

Elements in a period are determined by the number of electrons shell

The electronic configuration of the element is

2,8,8

the number of valence electron is 8 that means it is in Group 8/O

the number of electron shell is 3 that means it is in period (row) 3

Group 8/O elements are called Noble gases

In an alternate universe the reaction between acid and base is endothermic. 20.0 mL of 0.200 M monoprotic acid dissolved in water and 50.0 mL of 0.100 M monoprotic base dissolved in water were mixed in a coffee-cup calorimeter. The density of the solution is 2.010 g/mL. The specific heat of the solution is 4.00 J/gK. The temperature changed by -13.57 degrees Celsius (i.e., decreased by that much). Calculate the enthalpy of reaction on kJ/mol limiting reagent​

Answers

Explanation:

잘 봐 넌 그 꼴 나지

우린 탁 쏴 마치 콜라지

너의 각막 깜짝 놀라지

꽤 꽤 폼나지 포 포 폼나지

Based on the procedure, which of the following are reasonable sources of errors in determining heat lost or gained? One or more answers are correct and you will receive negative points for incorrect answers. Group of answer choices The cap of the calorimeter was not closed immediately after mixing. The final temperature was measured before the temperature stopped changing. Temperatures were not measured right before mixing. Volumes of solutions were not measured accurately.

Answers

Answer:

The possible source of errors as regard the Procedure are:

The final temperature was measured before the temperature stopped changing The cap of the calorimeter was not closed immediately after mixing temperatures where not measured right before mixing

Explanation:

The procedure referred to should a experiment with regards heat

The possible source of errors as regards the Procedure are:

The final temperature was measured before the temperature stopped changing The cap of the calorimeter was not closed immediately after mixing temperatures where not measured right before mixing

What did Dalton compare atoms to?
A. Wood
B. Jacks
C. Marbles
D. Leaves

Answers

Explanation:

the answer is C marbles hope you find it helpful

(giving brainiest) solve please!

Answers

Answer:

The water cycle shows the continuous movement of water within the Earth and atmosphere. It is a complex system that includes many different processes. Liquid water evaporates into water vapor, condenses to form clouds, and precipitates back to earth in the form of rain and snow. Water in different phases moves through the atmosphere (transportation). Liquid water flows across land (runoff), into the ground (infiltration and percolation), and through the ground (groundwater). Groundwater moves into plants (plant uptake) and evaporates from plants into the atmosphere (transpiration). Solid ice and snow can turn directly into gas (sublimation). The opposite can also take place when water vapor becomes solid (deposition).

PLZZZ HELP. Just say yellow goes under ..... for example.

Answers

Answer:

yellow goes under...... for example.

Cu is in FCC structure. We know that even at close to melting temperature, vacancies are still sparsely distributed, i.e., it is almost impossible to find two vacancies directly adjacent to each other. So, for a single vacancy (assuming that it is at the origin (0,0,0) of FCC structure), determine (1) How many Cu atoms (nearest neighbors) can directly jump to this vacancy

Answers

Answer:

6

Explanation:

FCC is face centered cubic lattice. In FCC structure, there are eight atoms at the eight corner of the cubic unit cell and one atom centered in each of the faces. FCC unit cells consist of four atoms, (8/8) at the corners and (6/2) in the faces.

Given that, Cu has FCC structure and it contains a vacancy at origin (0, 0, 0). And there is no other vacancy directly adjacent to the vacancy at the origin. So, all the adjacent positions contain Cu atoms. Hence, the total number of adjacent atoms of the vacancy at origin can jump into this vacancy.

the above FCC unit cell clearly indicates that there are six adjacent atoms adjacent to the vacancy at origin

So, the total number of adjacent atoms of the vacancy at origin can jump into this vacancy is 6.


What does water vapor do to the density of the air

Answers

Answer:

The amount of water vapor in air influence density. Water vapor is relatively light compared to diatomic Oxygen and diatomic Nitrogen - the dominant components in air. When vapor content increases in moist air the amount of Oxygen and Nitrogen are decreased per unit volume and the density of the mix decreases since the mass is decreasing.

Explanation:

How much mass of water (H₂O) do I need to mass out if I need 2.5 moles for a reaction?

Answers

Answer:

45g

Explanation:

Use the Mole = Mass x Mr equation:

Rearrange the above equation to find mass,

Mass = 2.5 moles x 18 (Mr of H₂O) = 45g

Therefore answer is 45g

Answer:

Given

number of moles (n) =2 . 5 mol

R.tc maas of H2O (m) =?

sln

H2O =(1x2+16)

=18g/mol

n=m/mr

m=nxmr

m=2.5x18

m=45g

mass of water is 45g

what is meant by chemical combination? what are the laws of chemical combination?​

Answers

Answer:

In simple terms, this law states that matter can neither be created nor destroyed. In other words, the total mass, that is, the sum of the mass of reacting mixture and the products formed remains constant.

Explanation:

please give me brain list and follow

What part of the food. chain is a pine?
a:primary consumer
b:secondary consumer
c:herbivore
d:producer​

Answers

Producer. Hope this helps!

Answer:

producer

Explanation:

What is the mass of 2.9 moles of calcium? Explain please

Answers

Answer:

116 g

Explanation:

From the question given above, the following data were obtained:

Number of mole of calcium = 2.9 moles

Mass of calcium =.?

The mole and mass of a substance are related according to the following formula:

Mole = mass / molar mass

With the above formula, we can obtain the mass of calcium. This can be obtained as follow:

Number of mole of calcium = 2.9 moles

Molar mass of calcium = 40 g/mol

Mass of calcium =.?

Mole = mass / molar mass

2.9 = mass of calcium / 40

Cross multiply

Mass of calcium = 2.9 × 40

Mass of calcium = 116 g

Therefore, the mass of 2.9 moles of calcium is 116 g.

what does an electromagnet create?
a. electricity
b. magnet
c. neutrons

Answers

Answer:

Electromagnet creates electricity.

Explanation:

a.) electricity is the right answer i believe

When aqueous ammonia is added to a solution containing Bi3+ and Cu2+ cations, ____________ occurs. A. Reduction to black bismuth metal.B. Precipitation of a black bismuth hydroxide.C. Precipitation of white bismuth hydroxide. D. Formation of a red-brown precipitate of Cu2[Fe(CN)6].

Answers

Answer:

C. Precipitation of white bismuth hydroxide.

Explanation:

When aqueous ammonia is added to a solution that has Bi3+ and CU2+ cations, what we would have as a chemical result is the precipitation of white Bismuth hydroxide.

The chemical reaction for this can be written as,

Bi3+ + 2NH3 + 3H2O ⇌ Bi(OH)3(s) + 3NH4

Thank you!

What is the difference between global warming and climate change? *
1 point
There is no difference, we can use either term

Climate change happens because of humans, global warming happens naturally

Global warming focuses only on temperature increases, climate change only focuses on temperature decreases

Global warming focuses only on temperature increasing, climate changes is a broader term that refers to the range of changes happening on Earth in addition to temperature changes

Answers

Answer: D: Global warming focuses only on temperature increasing, climate changes is a broader term that refers to the range of changes happening on Earth in addition to temperature changes

Explanation:

Answer:

what he/she said

Explanation:

Which is not a way to accelerate an object ? Speed it up slow it down change its direction apply balanced forces

Answers

Answer:

Objects are NOT accelerating if they are traveling in a straight line at constant speed

Slow it down

the answer is slow it down

does water burn? for my sister that says water does burn

Answers

no, water can’t burn

Answer:

No, water doesn't burn. It only can burn under specific conditions in a lab.

Explanation:

find the percentage of mass in each of the element Ca ( HCO3)2 (Ca= 40, H = 1, O = 16, C= 35)​

Answers

Answer:

% Ca = 24.69%

% H = 1.2%

% C = 14.8%

% O = 59.25%

Explanation:

The percentage by mass of each element can be calculated by dividing the mass of each element in the compound by the molar mass of the compound.

Molar mass of Ca(HCO3)2

Where; (Ca= 40, H = 1, O = 16, C= 12)

= 40 + {1 + 12 + 16(3)}2

= 40 + {13 + 48}2

= 40 + {61}2

= 40 + 122

= 162g/mol

- % mass of Ca = 40/162 × 100

= 0.2469 × 100

= 24.69%

- % mass of H = 2/162 × 100

= 0.012 × 100

= 1.2%

- % mass of C = 24/162 × 100

= 0.148 × 100

= 14.8%

- % mass of O = 96/162 × 100

= 0.5925 × 100

= 59.25%

How do I solve this? please help and only respond with the answer/work. I will mark BRAINLIEST
Calculate the molarity of a substance that is 10 mol in a 4L solution.
0.25 M
2.5 M
40 M
63.6 M​

Answers

Answer: I think the answer is 2.5 M.

Explanation:  Formula: M = n/v

M= 10 mol / 4L

M= 2.5 M

Chlorination of phenol gives para product but bromination of phenol gives Ortho para product why

Answers

Answer:

here you go

Explanation:

The reaction of phenol with bromine is known as bromination of phenol. Solvent has great influence on the reaction. In different solvents, different products are obtained. The action of bromine on phenol can be explained as:

Reaction with bromine in water:—-

Reaction with bromine in water

Phenol reacts with bromine water to give 2,4,6-tribromophenol.

In water, ionisation is facilitated. Phenol gets ionised to form phenoxide ion, which is even better ortho,para-directing. Bromine also gets ionised to a larger extent to form a large number of bromonium ions. And Bromine ions are highly stabilized in ionic solvents. So the formation of strong o,p-directing group and stabilization of Br+ enhances the formation of tribromophenol.

Reaction with bromine in CS2:—-

Reaction with bromine in non-polar organic solvents

Phenol reacts with bromine in a presence of Carbon disulphide to form a mixture of o-bromophenol and p-bromophenol. Among which p-bromophenol predominates. In CS2 ionisation is not facilitated that much. As it is a non-polar solvent it doesn't the Br+ on. Also −OH group is moderately o,p-directing. So as usual para-product is more formed.

For many purposes we can treat propane (CH) as an ideal gas at temperatures above its boiling point of - 42°C. Suppose the temperature of a sample of propane gas is lowered from 25.0°C to - 22.0 °C, and at the same time the pressure is changed. If the initial pressure was 0.58 kPa and the volume decreased by 40.0%, what is the final pressure?

Answers

Answer: The final pressure is 0.81 kPa

Explanation:

The combined gas equation is,

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

where,

[tex]P_1[/tex] = initial pressure of gas = 0.58 kPa

[tex]P_2[/tex] = final pressure of gas = ?

[tex]V_1[/tex] = initial volume of gas = v

[tex]V_2[/tex] = final volume of gas = [tex]v-\frac{40}{100}\times v=0.6v[/tex]

[tex]T_1[/tex] = initial temperature of gas = [tex]25^0C=(25+273)K=298K[/tex]

[tex]T_2[/tex] = final temperature of gas = [tex]-22^0C=(-22+273)K=251K[/tex]

Now put all the given values in the above equation, we get:

[tex]\frac{0.58\times v}{298}=\frac{P_2\times 0.6v}{251}[/tex]

[tex]P_2=0.81kPa[/tex]

The final pressure is 0.81 kPa

If 8 moles of magnesium chloride react with enough aluminum, how many moles
of aluminum chloride are produced?

Answers


I hope this was helpful

If 8 moles of magnesium chloride react with enough aluminum then the amount of aluminum chloride produced is 5.3 mole.

What is aluminum?

Aluminum is defined as a chemical substance with the atomic number 13 and the symbol Al. Aluminum has a density that is around one third that of steel, which is lower than that of most common metals. It has a strong affinity for oxygen, and when exposed to air, creates a protective oxide coating on the surface.

3 moles MgCl2and 2 moles Al will produce 3 moles Mg and 2 moles AlCl3.Therefore, if 8.0 moles of MgCl₂ react, the amount of ammonium chloride that may hypothetically be created can be calculated using the mole ratio between MgCl₂  and AlCl₃ .

8.0 mole MgCl₂ x 2 mole AlCl₃ / 3mol MgCl₂

= 5.3 mole AlCl3

Thus, if 8 moles of magnesium chloride react with enough aluminum then the amount of aluminum chloride produced is 5.3 mole.

To learn more about aluminum, refer to the link below:

https://brainly.com/question/9496279

#SPJ2

Other Questions
types of pictures used in Egypt What happened to the peppered moths of Manchester, England when industry boomed and coal smoke darkened the light grey bark of the trees? What is up guys!Please only answer if you know the answer, the comment section is right below. Please don't waste my points!Also, please show all of your work, you are trying to help me better understand the concept, not just give me the answer.The image is down below. Show work! Thanks! What is unanimous consent, and how does it work in the senate? 637m as a fraction of 7.7km Marcus tries to move a refrigerator but can't. Has he done work?A) Yes, because he used energy.B) Yes, because he exerted a force.C) No, because he did not move the object.D) No, because he did not use energy. 2. Mr. Hoffman has a circular chicken coup with a radius of 2.5 feet. He wants to put a chain link fence around the coup to protect the chickens. Which measurement is closest to the length of fence he will need? Since hydrogen contains the prefix hydro, what two elements does it contain?several different mineralswater and oxygenacid and saltsalt and oxygen Please help me solve this problem What is the area of a regular pentagon with an 8-cmapothem and 11.6-cm sides?Sub Write a Who, what, when, where, why, how summary about the Berlin Wall. Michle is buying carpet for a room with the dimensions shown If a train goes 20 km east then it turns and travels 43 km north then it goes 20 km west then travels south in an unknown number of kilometers and at the end there back in the original location how far did the train travel south Find the value of the variables What is the preposition in the following sentence?Judith placed a card between the pages.cardaplacedbetween Q. what will happen to a plant if its xylem is removed ?Q. In which chamber of heart is oxygenated and deoxygenated blood found ?Pls mate ans fast, hurry up What is 8/11 divided by 4 Help plz im doing homework!!!!! Ben wants to have his birthday at the bowling alley with a few of his friends, but he can spend no more than $80. The bowling alley charges a flat feeof $45 for a private party and $5.50 per person for shoe rentals and unlimited bowling. Write an inequality that represents the total cost of Bens birthday for p people given his budget. How do we determine the number of electrons in a neutral atom? For the situation, write and solve an equation. Then, explain what your solution means. If you get stuck, try drawing a diagram on your paper. A food pantry is making packages. Each package weighs 64 pounds. Each package contains 4 boxes. Each box contains a 7-pound bag of beans and a bag of rice. The bags of rice are all identical.