Answers
Answer:
ok tbh i didnt cry when neji died but now when i think about it i just cry thinking about how himawari could have met her uncle
Explanation:
Related Questions
The image blow shows a certain type of global wind:
What best describes these winds? Polar easterlies caused by air above poles being relatively warmer.
Polar easterlies caused by air above poles being relatively cooler.
Trade winds caused by air above equator being relatively warmer.
Trade winds caused by air above equator being relatively cooler.
Answers
Answer:
i got u its a
Explanation:
A 0.22 caliber handgun fires a 1.9g bullet at a velocity of 765m/s. Calculate the de Broglie wavelength of the bullet. Is the wave nature of matter significant for the bullets?
Answers
Answer:
de Broglie wavelength of the bullet is 4.56 x 10⁻³⁴ mThe value of the wavelength shows that wave nature of matter is insignificant for the bullet because it is larger than particles.Explanation:
Given;
mass of the bullet, m = 1.9 g = 0.0019 kg
velocity of the bullet, v = 765 m/s
de Broglie wavelength of the bullet is given by;
[tex]\lambda = \frac{h}{mv}[/tex]
where;
h is Planck's constant = 6.626 x 10⁻³⁴ J/s
λ is de Broglie wavelength of the bullet
[tex]\lambda = \frac{h}{mv}\\\\ \lambda =\frac{(6.626*10^{-34})}{(0.0019)(765)}\\\\ \lambda =4.56 *10^{-34} \ m[/tex]
Thus, this value of the wavelength shows that wave nature of matter is insignificant for the bullet because it is larger than particles.
Given:
Mass, m = 1.9 g or, 0.0019 kgVelocity, v = 765 mPlank's constant, h = 6.626 × 10⁻³⁴ J/sThe De-Broglie wavelength,
→ [tex]\lambda = \frac{h}{mv}[/tex]
By putting the values,
[tex]= \frac{6.626\times 10^{-34}}{0.0019\times 765}[/tex]
[tex]= 4.56\times 10^{-34} \ m[/tex]
Thus the response above is right.
Learn more about wavelength here:
https://brainly.com/question/10931065
3. Which object has more inertia?
A. A tractor trailer rig moving at 2 m/s
B. A pingpong ball rolling a 2 m/s
C. A bowling ball rolling at 1m/s
D. A car rolling at 5 m/s
Answers
Answer:
A. A tractor trailer rig moving at 2 m/s
Explanation:
Inertia can be defined as the tendency of an object or a body to continue in its state of motion or remain at rest unless acted upon by an external force.
In physics, Sir Isaac Newton's first law of motion is known as law of inertia and it states that, an object or a physical body in motion will continue in its state of motion at continuous velocity (the same speed and direction) or, if at rest, will remain at rest unless acted upon by an external force.
The inertia of an object such as a tractor trailer rig is greatly dependent or influenced by its mass; the higher quantity of matter in a tractor trailer rig, the greater will be its tendency to continuously remain at rest.
Hence, the object that has more inertia is a tractor trailer rig moving at 2 m/s because it has more mass than all the other objects in the category. Also, the mass of an object is directly proportional to its inertia.
A mass of 100 g is tied to the end of an 80.0-cm string and swings in a vertical circle about a fixed center under the influence of gravity. The speed of the mass at the top of the swing is 3.50 m/s. What is the speed of the mass at the bottom of its swing?
Answers
Answer:
the speed of the mass at the bottom of its swing is 6.61m/s
Explanation:
Applying energy conservation
[tex]\frac{1}{2}m(Vlowest)^2 = mg(2R) + \frac{1}{2}m(Vtop)^2[/tex]
There is no potential energy at the bottom as the body will have a kinetic energy there.
h= 2R = 1.6m as the diameter of the circle will represent the height in the circle.
g = 9.8m/s^2
m will cancel out, so the net equation becomes.
[tex]\frac{(Vbottom)^2}{2} = 2gR + \frac{(Vtop)^2}{2}[/tex]
= [tex]2*9.8*0.8 + \frac{(3.5)^2}{2}[/tex]
= 15.68+ 6.125
[tex]\frac{(Vbottom)^2 }{2}[/tex] = 21.805
(Vb)^2 = 2*21.805
= 43.64
Vb = 6.61m/s
A typical elevator car with people has a mass of 1500.0 kg. Elevators are currently approaching speeds of 20.0 m/s - faster than the speed.
Required:
What is the upward force required if the elevator moves upward 200.0 meters before reaching 20.0 m/s?
Answers
Answer:
1500NExplanation:
Force = mass * acceleration
Given
Mass = 1500kg
Get the acceleration using the equation of motion;
v² = u²+2aS
20² = 0+2s(200)
400 = 400a
a = 400/400
a = 1m/s²
Get the upward force required
F = 1500 * 1
F = 1500N
Hence the upward force required if the elevator moves upward 200.0 meters before reaching 20.0 m/s is 1500N
A 760-kg horse whose power output is 1 hp is pulling a sled over the snow at 3.9 m/s. Find the force the horse exerts on the sled. Round your intermediate step to one decimal place and the final answer to two decimal places.
Answers
Answer:
191 N
Explanation:
Power can be regarded as the amount of energy that is been transfered at a unit time and can be calculated using the Express below
Po = F*V
P= power
F= force
V= velocity
From the question, we were given power output as 1 hp and velocity= 3.9 m/s.
But
1hp= 746 Watts = 746 Joules/s.
Then substitute the values
Po = F*V = 746 J/s
F ×3.9 = 746
F= 746/3.9
F = 191 N.
Therefore, the force the horse exerts on the sled iss 191 N
gravities limit is under which sphere as the perimeter?
Answers
I NEED THIS ASAP!!
Which formula defines the unit for electrical power?
Answers
Power = voltage x current
Answer:
1 W = 1 V x 1 A
Explanation:
Other dude is wrong this is right
A parallel plate capacitor is made up of two metal squares with sides of length 8.8 cm, separated by a distance 5.0 mm. When a voltage 187 V is set up across the terminals of the capacitor, the charge stored on the positive plate is equal to __________ nC. g
Answers
Answer:
2.56 nC
Explanation:
By definition, the capacitance is expressed by the following relationship between the charge stored on one of the plates of the capacitor and the potential difference between them, as follows:[tex]C =\frac{Q}{V} (1)[/tex]
For a parallel-plate capacitor, assuming a uniform surface charge density σ, if the area of the plates is A, the charge on one of the plates can be written as follows:[tex]Q = \sigma * A (2)[/tex]
Assuming an uniform electric field E, the potential difference V can be expressed as follows:[tex]V = E*d (3)[/tex]
where d is the distance between plates.
Applying Gauss 'Law to a closed surface half within one plate, half outside it, we find that E can be written as follows:[tex]E =\frac{\sigma}{\epsilon_{0}} (4)[/tex]
Replacing (4) in (3), and (2) in (1), we can express the capacitance C as follows:[tex]C= \frac{\epsilon_{0}*A}{d} (5)[/tex]
Taking (1) and (5), as both left sides are equal each other, the right sides are also equal, so we can write the following equality:[tex]\frac{Q}{V} = \frac{\epsilon_{0}*A}{d} (6)[/tex]
Solving for Q, we get:[tex]Q = \frac{\epsilon_{0}*A*V}{d} = \frac{8.85e-12F/m*(0.088m)^{2}*187 V}{5.0e-3m} = 2.56 nC[/tex]
Starting from rest, a coin and a ring roll down a ramp without slipping. Which of the following are true:
A. The ring reaches the bottom first
B. The coin reaches the bottom first
C. The coin and the ring arrive at the same time
D. The one the reaches the bottom first is the one with the largest mass
E. The one that reaches the bottom first is the one with the largest diameter.
Answers
Answer:
The answer is D
Explanation:
The object with the heavy mass will reach first because the cause it is heaver so it will go faster
1. When an object is at rest, not moving, and is crashed into by another
object...which object is experiencing a force and in what direction? Or are
both experiencing a force - what direction?
Answers
Answer:
both experience forces or at least a force
Explanation:
it would go in the direction the other object
(second object, the one that crashed) was going
si if going right then right if left then left
plus or minus
You have a source of energy containing 21 gj of energy at 600k how much this energy can be converted to work when rejecting heat to the atmosphere at 27°C?
Answers
Answer:
Available energy = 35 x 10⁶ J
Explanation:
Given:
Amount of energy (Q) = 21 gj = 21 x 10⁹ J
Temperature T1 = 600 k
Temperature T0 = 27 + 273 = 300k
Find:
Available energy
Computation:
Available energy = Q[1/T0 - 1/T1]
Available energy = 21 x 10⁹ J[1/300 - 1/600]
Available energy = 35 x 10⁶ J
If a penny is dropped from rest from a building takes 2 seconds to hit the ground, calculate the velocity of the penny right before it touches the ground?
a. 19.6 m/s
b 9.8 m/s
c. 0 m/s
d 29.4 m/s
Answers
Answer:
20m/s
Explanation:
u = 0m/s
t = 2s
a = +g = 10m/s²
t = 2d
v = ?
v = ut + 1/2at²
v = 0(2) + 1/2(10)(2)²
v = 0 + 5(4)
v = 20m/s
The diagram below shows two bowling balls, A and B, each having a mass of 7.0 kg, placed 2.00 m apart between their centers.
Answers
Answer:
F = 1.63 x 10⁻⁹ N
Explanation:
Complete question is as follows:
The diagram below shows two bowling balls, A and B, each having a mass of 7.0 kg, placed 2.00 m apart between their centers. Find the magnitude of Gravitational Force?
Answer:
The gravitational force is given by Newton's Gravitational Law as follows:
F = Gm₁m₂/r²
where,
F = Gravitational Force = ?
G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²
m₁ = m₂ = mass of each ball = 7 kg
r = distance between balls = 2 m
Therefore,
F = (6.67 x 10⁻¹¹ N.m²/kg²)(7 kg)(7 kg)/(2 m)²
F = 1.63 x 10⁻⁹ N
Use the above picture to fill in the blanks for the following statement.
One of the element carbon combines with one of the element oxygen to form one of the compound carbon dioxide.
Answers
Answer:
C + 2O ------ CO2
Explanation:
"One" element of Carbon combines with "Two" elements of Oxygen, to form "One" compound of Carbon dioxide.
I didn't really get what you meant but this is my guess of what you meant
A sample with a path length of 1 cm absorbs 99.0% of the incident light at a wavelength of 274 nm, measured with respect to an appropriate solvent blank. Tyrosine is known to be the only chromophore present in the sample that has significant absorption at 274 nm. Calculate the molar concentration of tyrosine in the sample.
Answers
Answer:
17. NADH has a molar extinction coefficient of 6200 M2 cm at 340 nm. Calculate the molar concentration of NADH required to obtain an absorbance of 0.1 at 340 nm in a 1-cm path length cuvette. 18. A sample with a path length of 1 cm absorbs 99.0% of the incident light at a wavelength of 274 nm, measured with respect to an appropriate solvent blank. Tyrosine is known to be the only chromophore present in the sample that has significant absorption at 274 nm. Calculate the molar concentration of tyrosine in the sample.
Explanation:
Find analytically the velocity of the object at the end point of the inclined plane for a certain angle Ө
Answers
I don't know if there is other given information that's missing here, so I'll try to fill in the gaps as best I can.
Let m be the mass of the object and v₀ its initial velocity at some distance x up the plane. Then the velocity v of the object at the bottom of the plane can be determined via the equation
v² - v₀² = 2 a x
where a is the acceleration.
At any point during its motion down the plane, the net force acting on the object points in the same direction. If friction is negligible, the only forces acting on the object are due to its weight (magnitude w) and the normal force (mag. n); if there is friction, let f denote its magnitude and let µ denote the coefficient of kinetic friction.
Recall Newton's second law,
∑ F = m a
where the symbols in boldface are vectors.
Split up the forces into their horizontal and vertical components. Then by Newton's second law,
• net horizontal force:
∑ F = n cos(θ + 90º) = m a cos(θ + 180º)
→ - n sin(θ) = - m a cos(θ)
→ n sin(θ) = m a cos(θ) ……… [1]
• net vertical force:
∑ F = n sin(θ + 90º) - w = m a sin(θ + 180º)
→ n cos(θ) - m g = - m a sin(θ)
→ n cos(θ) = m (g - a sin(θ)) ……… [2]
where in both equations, a is the magnitude of acceleration, g = 9.80 m/s², and friction is ignored.
Then by multiplying [1] by cos(θ) and [2] by sin(θ), we have
n sin(θ) cos(θ) = m a cos²(θ)
n cos(θ) sin(θ) = m (g sin(θ) - a sin²(θ))
m a cos²(θ) = m (g sin(θ) - a sin²(θ))
a cos²(θ) + a sin²(θ) = g sin(θ)
a = g sin(θ)
and so the object attains a velocity of
v = √(v₀² + 2 g x sin(θ))
If there is friction to consider, then f = µ n, and Newton's second law instead gives
• net horizontal force:
∑ F = n cos(θ + 90º) + f cos(θ) = m a cos(θ + 180º)
→ - n sin(θ) + µ n cos(θ) = - m a cos(θ)
→ n sin(θ) - µ n cos(θ) = m a cos(θ) ……… [3]
• net vertical force:
∑ F = n sin(θ + 90º) + f sin(θ) - w = m a sin(θ + 180º)
→ n cos(θ) + µ n sin(θ) - m g = - m a sin(θ)
→ n cos(θ) + µ n sin(θ) = m g - m a sin(θ) ……… [4]
Then multiply [3] by cos(θ) and [4] by sin(θ) to get
- n sin(θ) cos(θ) + µ n cos²(θ) = - m a cos²(θ)
n cos(θ) sin(θ) + µ n sin²(θ) = m g sin(θ) - m a sin²(θ)
and adding these together gives
µ n (cos²(θ) + sin²(θ)) = m g sin(θ) - m a (cos²(θ) + sin²(θ))
µ n = m g sin(θ) - m a
m a = m g sin(θ) - µ n
m a = m g sin(θ) - µ m g cos (θ)
a = g (sin(θ) - µ cos (θ))
and so the object would instead attain a velocity of
v = √(v₀² + 2 g x (sin(θ) - µ cos (θ)))
A hydraulic car jack needs to be designed so it can lift a 2903.57 lb car assuming that a person can exert a force of 24.41 lbs. If the piston the person is pushing on had a radius of 3.26 cm, what should the diameter of the piston be that is used to raise the car?
Answers
Answer:
Diameter of the piston would be 0.71 m (71.1 cm)
Explanation:
From the principle of pressure;
[tex]\frac{F_{1} }{A_{1} }[/tex] = [tex]\frac{F_{2} }{A_{2} }[/tex]
Let [tex]F_{1}[/tex] = 2903.57 lb, [tex]F_{2}[/tex] = 24.41 lbs, [tex]r_{2}[/tex] = 3.26 cm = 0.0326 m.
[tex]A_{2}[/tex] = [tex]\pi r^{2}[/tex]
= [tex]\frac{22}{7}[/tex] x [tex](0.0326)^{2}[/tex]
= 0.00334 [tex]m^{2}[/tex]
So that:
[tex]\frac{2903.57}{A_{1} }[/tex] = [tex]\frac{24.41}{0.00334}[/tex]
[tex]A_{1}[/tex] = [tex]\frac{2903.57*0.00334}{24.41}[/tex]
= 0.3973
[tex]A_{1}[/tex] = 0.4 [tex]m^{2}[/tex]
The radius of the piston can be determined by:
[tex]A_{1}[/tex] = [tex]\pi r^{2}[/tex]
0.3973 = [tex]\frac{22}{7}[/tex] x [tex]r^{2}[/tex]
[tex]r^{2}[/tex] = [tex]\frac{0.3973*7}{22}[/tex]
= 0.1264
r = [tex]\sqrt{0.1264}[/tex]
= 0.3555
r = 0.36 m
Diameter of the piston = 2 x r
= 2 x 0.3555
= 0.711
Diameter of the piston would be 0.71 m (71.1 cm).
g When the movable mirror of the Michelson interferometer is moved a small distance X while making a measurement, 246 fringes are counted moving into the field of the viewing mirror. What is X if the wavelength of the light entering the interferometer is 562 nm
Answers
Answer:
X = 69.1 x 10⁻⁶ m = 69.1 μm
Explanation:
The relationship between the motion of the moveable mirror and the fringe count of the Michelson's Interferometer is given by the following formula:
d = mλ/2
where,
d = distance moved by the mirror = X = ?
m = No. of Fringes counted = 246
λ = wavelength of light entering interferometer = 562 nm = 5.62 x 10⁻⁷ m
Therefore,
X = (246)(5.62 x 10⁻⁷ m)/2
Therefore,
X = 69.1 x 10⁻⁶ m = 69.1 μm
an object of mass 4kg moving with initial velocity if 20m/s accelerates for 10s and attaind a final velocity of 60m/s calculate the acceleration
Answers
Answer:
given us,
mass= 4×9.8gm m(9.8) formula
= 39.2
final velocity (v)= 60m/s
initial velocity (u)= 20m/s
time(t)= 10s
acleration(a)=?
now,
accleration(a)= v-u/t=60- 20/10
=40/10
=4m/s
:. the acceleration is 4 m/s
Explanation:
first we have to calculate mass and we can use acceleration formula
A 36.3 kg cart has a velocity of 3 m/s. How much kinetic energy does the object have?
Answers
Answer:
163.35
__________________________________________________________
We are given:
Mass of the object (m) = 36.3 kg
Velocity of the object (v) = 3 m/s
Kinetic Energy of the object:
We know that:
Kinetic Energy = 1/2(mv²)
KE = 1/2(36.3)(3)² [replacing the variables with the given values]
KE = 18.15 * 9
KE = 163.35 Joules
Hence, the cart has a Kinetic Energy of 163.35 Joules
If you are pushing 200 kg of textbooks with acceleration of 2m/s2, how much net force are you exerting on the books? (Fnet=ma)
( There is more than one answer)
200N
100N
400Kg
400N
400 kg.m/s2
Answers
Explanation:
m=200kg
a=2m/s2
F=ma
F=200kg×2m/s2
=400kg.m/s2 or 400N
If it requires 7.0 J of work to stretch a particular spring by 1.8 cm from its equilibrium length, how much more work will be required to stretch it an additional 3.6 cm?
Answers
Answer:
56 J
Explanation:
The following data were obtained from the question:
Energy 1 (E₁) = 7 J
Extention 1 (e₁) = 1.8 cm
Extention 2 (e₂) = 1.8 + 3.6 = 5.4 cm
Energy 2 (E₂) =?
Energy stored in a spring is given by the following equation:
E = ke²
Where E is the energy.
K is the spring constant.
e is the extension.
E = ke²
Divide both side by e²
K = E/e²
Thus,
E₁/e₁² = E₂/e₂²
7/ 1.8² = E₂/ 5.4²
7 / 3.24 = E₂/ 29.16
Cross multiply
3.24 × E₂ = 7 × 29.16
3.24 × E₂ = 204.12
Divide both side by 3.24
E₂ = 204.12 / 3.24
E₂ = 63 J
Thus, the additional energy required can be obtained as follow:
Energy 1 (E₁) = 7 J
Energy 2 (E₂) = 63 J
Additional energy = 63 – 7
Additional energy = 56 J
A light truck with manual transmission has a circular brake drum with a diameter of d = 310 millimeters. Each brake pad, which presses against the drum, is s = 306 millimeters long. What central angle is subtended by one of the brake pads? Write your answer in both radians and degrees.
Answers
Answer:
113 degrees
1.974 radians
Explanation:
The angle can be calculated using below expression
Angle = arc/r
Where arc= diameter of d = 310 millimeters
r= s = 306 millimeters long.
Since both have the same unit, no need for conversion
Angle = arc/r = 306/(0.5×310 )
= 306/155
= 1.974 radians
Then to find the angle In degrees we have
R x 180/pi = D
Where R= angle in radians= 1.974 radians
1.974 x 180/π
Where π= 22/7
= 113 degrees( approximately)
Therefore, central angle is subtended by one of the brake pads is 1.974 radians
Section 4.1- Newton's First Law
Answers
Answer:
Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This is normally taken as the definition of inertia. ... If that velocity is zero, then the object remains at rest.
Explanation:
Answer:
Newton's First Law is about inertia; objects at rest stay at rest unless acted upon and objects in motion continue that motion in a straight line unless acted upon. The amount of inertia an object has is simply related to the mass of the object.
can vectors be strung together?
Answers
Answer:
The head-to-tail method is a graphical way to add vectors, The tail of the vector is the starting point of the vector, and the head (or tip) of a vector is the final, pointed end of the arrow.
Explanation:
In a simulation on earth, an astronaut in his space suit climbs up a vertical ladder. On the moon, the same astronaut makes the same climb. In which case does the gravitational potential energy of the astronaut change by a greater amount?
Answers
Answer:
Gravitational potential energy of the astronaut will change by a greater amount on the earth
Explanation:
Gravitational potential energy is expressed by the formula;
GPE = mgh
This means that the gravitational potential energy is directly proportional to the gravity(g)
Now, from constant values, gravity of moon is 1.62 m/s² while gravity of the earth is 9.81 m/s².
This means that if we plug in the values of g on the earth and g on the moon, the potential energy on the earth would be greater than that of the moon
Thus, gravitational potential energy of the astronaut will change by a greater amount on the earth
A car starts from rest and accelerates uniformly over a time of 7 seconds for a distance of 190m. Find the the acceleration of the car.
Answers
Answer:
a = 7.75 [m/²]
Explanation:
To solve this problem we must use the following equation of kinematics.
[tex]x=x_{0} +v_{o} *t + (\frac{1}{2})*a*t^{2}[/tex]
where:
x = final distance = 190 [m]
Xo = initial distance = 0
Vo = initial velocity = 0 (car starts from the rest)
a = acceleration [m/s²]
t = time = 7 [s]
190 = 0 + (0*7) + 0.5*a*(7²)
190 = 0.5*49*a
a = 7.75 [m/²]
A block of mass 12.2 kg is sliding at an initial velocity of 3.9 m/s in the positive x-direction. The surface has a coefficient of kinetic friction of 0.173. (indicate the direction with signs of your answer) (a) What is the force of kinetic friction in N acting on the block? (b) What is the block's acceleration in /s^2? (c) How Far will it slide (in m) before coming to rest? Plz answer as soon as possible
Answers
Answer:
Explanation:
a) Force of friction = μ R where μ is coefficient of kinetic friction and R is reaction force
R = mg where m is mass of the block
Force of friction F = μ x mg
= .173 x 12.2 x 9.8
= 20.68 N
b ) Only force of friction is acting on the body so
deceleration = force / mass = 20.68 / 12.2 = 1.7 m /s²
acceleration = - 1.7 m /s²
c )
v² = u² - 2 a s
v = 0 , u = 3.9 m /s
a = 1.7 m /s
0 = 3.9² - 2 x 1.7 x s
s = 4.47 m
1. Opposite charges
O repel
attract
Answers
Answer:
attract
Explanation:
that is the answer
Answer:
Attract.
Explanation:
I took the quiz.