On a particular day, Denali had a temperature of -23°C at its peak and 13°C at its base. What could be the reason for this temperature difference?
A.
Temperature increases with an increase in altitude.
B.
Temperature decreases with an increase in altitude.
C.
The base is close to the Gulf of Alaska.
D.
The mountain receives lake-effect snow.
Answers
Answer:
B.) Temperature decreases with an increase in altitude.
As you climb a mountain, you can expect the air temperature to decrease by 6.5 degrees C for every 1000 meters you gain. This is called the standard average lapse rate.
Related Questions
How can you describe a mineral that sparkles, breaks into thin sheets, and has a measure of 9 on the hardness scale?
1. It is metallic, has cleavage, and can be easily scratched.
2.It is non-metallic, has cleavage, and can be scratched by a nail.
3.It is metallic, has cleavage, and can be scratched with special equipment.
or 4. It is non-metallic, does not have cleavage, and can be scratched with difficulty.
Answers
What are the negative impacts on Genetically Modified Crops?
EXPLANATION ONLY NOT EXAMPLES PLZ
Brainlyist for best answer
Answers
I need answers please i will give you 20
Answers
Thoughts about Genetically Modified Crops
EXPLANATION PLZ NO EXAMPLES
BRAINLYIST FOR BEST ANSWER.
Answers
Although it might be beneficial for the farmers pockets There is a scientific consensus that currently available food derived from GM crops poses no greater risk to human health than conventional food, but that each GM food needs to be tested on a case-by-case basis before introduction. Nonetheless, members of the public are much less likely than scientists to perceive GM foods as safe. The legal and regulatory status of GM foods varies by country, with some nations banning or restricting them, and others permitting them with widely differing degrees of regulation.
However, opponents have objected to GM crops on grounds including environmental impacts, food safety, whether GM crops are needed to address food needs, whether they are sufficiently accessible to farmers in developing countries and concerns over subjecting crops to intellectual property law. Safety concerns led 38 countries, including 19 in Europe, to officially prohibit their cultivation.
When going from slower medium to a faster medium, light is bent _____.
Answers
Answer:
When going from slower medium to a faster medium, light is bent _downwards_.
Explanation:
hope this helps you!
explain how you can recognize the sound of a flute
Answers
The sound of a flute is poetic, light, mellow, and soft. Flute is a woodwind musical instrument produces the mild sound.
How flute produces sound?Sound is a vibration that propagates as an acoustic wave, through a transmission medium such as solid, liquid ang gases. When an object vibrates, it causes a movement in surrounding air molecules. The molecules collide with the molecules close to them, causing them to vibrating as well.
The sound from flute comes due to the vibrating columns of air inside it. In a flute, the air gets vibrated and the resonator amplifies the vibration and gets modified into sound. When air is blown into the holes of flute, it creates the vibration in the air molecules inside the flute and hence, sound is produced.
The flute can produced continuous sound by the presence of number of holes in it. The flute sounds may be high pitch or soft tone depends on the position of upper and lower lips on flute.The sounds of flute are rich, gentle and gracefull.
Learn to more about sounds in flute :
https://brainly.com/question/10153629
#SPJ3
State, with a reason, whether hotdog relish a homogeneous mixture or a heterogeneous mixture.
Answers
Answer:
MHMMMM TRY DOING A SAND WHICH I DID THIS A MOONTH AGO AND I MADE A 105 THINK ABOUT IT
Explanation:
1. List four actions you can take to cope with changing emotions and energy during adolescence.
2. Explain how a high self-esteem might affect a person’s life.
3. Explain how to set priorities, and why setting priorities is important.
4. Identify the six keys to setting achievable goals.
5. Describe what it means to become mature.
Answers
Answer:
1. Deep breaths, have a good diet, workout, speak to someone if needed.
2. Having high self-esteem can help you see yourself in a better way and be more positive about things.
3. Make lists, what is most important. It's important to keep you organized.
4. "Get clear on your goal. Determine what is at stake. Develop a detailed action plan. Join (or form) a group committed to the same goal."
5. "Maturity is the art of being responsible for your actions, being sensitive and considerate towards others and having the ability to change and adapt to circumstances. An emotionally mature person is always adding value to himself and those around."
Explanation:
1]Here are five ways for teens to improve their emotional self-regulation.
Learning to Ride the Wave. When teens feel intense emotions, they sometimes try to push those feelings away. ...
Meditation and Mindfulness. ...
Physical Exercise. ...
Sleep Hygiene. ...
Creativity and Flow
2]When you value yourself and have good self-esteem, you feel secure and worthwhile. You have generally positive relationships with others and feel confident about your abilities. You're also open to learning and feedback, which can help you acquire and master new skills. ... Confident in your ability to make decisions
3]Sticking to regular routines and gathering up our priorities will not only help curve any negative feelings but also give us a sense of accomplishment throughout hard times. We can improve by knowing our priorities and what matters most in life. As well as setting good priorities to help guide us along the way.
4]Get clear on your goal. The more clarity you have the better. ...
Determine what is at stake. Why, exactly, do you want to accomplish this goal? ...
Develop a detailed action plan. ...
Go public with your commitment. ...
Join (or form) a group committed to the same goal. ...
Review your goal and rationale regularly.
5] Set goals effectively
Goals are the basis of an effective performance management process. There are two key elements to consider when developing goals. First, are goals written clearly and objectively? Second, are they directly contributing to the achievement of business strategy?
Typically, the process begins with departmental managers setting goals for their departments, based upon organization-wide goals, which support the general business strategy. Making departmental goals accessible to all managers ensures there is no overlap, reduces conflict, and allows members of different departments to see where they support each other and ensure they are not working at cross purposes. Each manager in turn shares the overall goals with his/her department and meets with employees to identify individual performance goals and plans.
When setting goals, key job expectations and responsibilities should act as the main guide and reference. Goals should be set that not only address what is expected, but also how it will be achieved. For example, the "what" covers quality or quantity expected, deadlines to be met, cost to deliver, etc. The "how" refers to the behavior demonstrated to achieve outcomes, for example, focus on customer service. In addition, some organizations choose to include competencies within performance expectations, to reinforce the link to business strategy, vision and mission.
An accepted framework to use to help write effective goals is SMART
please give me a branilyst
Jennie observes her brother playing pool and has a theory that the potential energy in the pool stick is transformed into kinetic energy when he hits the ball.
Answers
Answer:
This theory is true and should continue to expand on this theory.
Explanation:
hope this helps.
analyze if the frequency of a sound wave increases what happnes to the wavelength
Answers
Answer:
it's either a b c or do I swear
newtons first law
the only way to change the velocity of an object is to apply _____
Answers
Answer:
the only way to change the velocity of an object is to apply force.
Explanation:
Newton’s first law of motion says an object will continue to move with the same velocity unless acted on by an external force.
Answer: FORCE! the answer is force!
Scientists can use aircraft to better understand hurricanes. Which two kinds of information about hurricanes can scientists gather using aircraft.
Answers
Scientist can gather the information of the wind speed and location, for better understand hurricanes
What is hurricanes ?A hurricane is a tropical cyclone is a fast rotating storm system with a low-pressure core, a closed low-level atmospheric circulation, high winds, and a spiral arrangement of thunderstorms causing heavy rain.
Aircraft can collect thorough, exact measurements of winds in a cyclone, which can assist researchers understand what is going on inside the storm and allow for better forecasts.
Hence,scientist can gather the information of the wind speed and location, for better understand hurricanes
To learn more about hurricanes, refer:
https://brainly.com/question/18950883
#SPJ2
Timbre describes the sound’s _____.
pitch
loudness
tone
quality
Answers
Answer:
A) pitch
Explanation:
I did band and also g*ogled it to check :)
If it isn't A, however, it is C
Hope this helps :D
Answer:
loudness
Explanation:
allow the ear to distinguish sounds which have the same pitch and loudnes
Pitch is determined by the ____ of a sound wave.
velocity
wavelength
frequency
amplitude
Answers
Thoughts about Genetically Modified Crops
Answers
i need help :>................
Answers
12.) Compression
13.) Energy
14.) Mechanical Wave
I couldn’t read the rest of 15.
Hope this helps!
12. compression (cuz the particles rly close together)
13. energy
14. mechanical waves
Compare the cost of using pan with a power rating of 2kW and a pan rated 1.2kW
Answers
Answer:
3.2wK
Explanation:
Sorry if it is wrong my cousin told me
By looking at the relative positions of the elements calcium, Ca, fluorine, F, sulfur, S, and oxygen, O, in the Periodic Table, which TWO descriptions are TRUE about calcium fluoride, CaF2, and sulfur dioxide, SO2?
CaF2 is an ionic compound, and SO2i is a covalent compound.
CaF2 is formed by covalent bonds, and SO2 is formed by ionic bonds.
CaF2 cannot conduct electricity when dissolved in water, but SO2 can.
CaF2 is a gas at room temperature, while SO2 has a high boiling point.
CaF2 has a high boiling point, while SO2 is a gas at room temperature.
CaF2 is soft at room temperature, while SO2 is hard and forms crystals.
Answers
Answer:
B
Explanation:
i got B for my answer sorry if wrong
Newton's second law of motion is F = ma.
A net force of 60 N north acts on an object with a mass of 30 kg. Use Newton's second law of motion to calculate the amount of acceleration the object will experience. Then explain how the amount of acceleration will change if the net force or the mass of the object increases.
Answers
60=30.a
60/30=30.a/30
2=a
What happens when the two wires going in to an appliance touch?
nothing
resistance
overload
short circuit
Answers
Answer:
You will receive an electrical shock. You will receive a shock if you touch two wires at different voltages at the same time. You will receive a shock if you touch a live wire and are grounded at the same time. When a circuit, electrical component, or equipment is energized, a potential shock hazard is present.
Explanation:
sorry this is like a year later and I hope this will help you if you haven't got it already
Answer:
Explanation:
They will short circuit and shock u did the exam
When writing a scientific paper, look for the most credible sources. Science doesn’t show bias, but we humans tend to show bias. Beware of sites and articles that provide facts without proper scientific evidence. Avoid using information from such sites. You must be able to identify reliable sites so the data in your paper is credible.
Use sources that end in .gov (government sites), such as CDC.gov. They are reliable sources. You can also use sites ending in .edu. They can be deemed trustworthy, but sometimes the information is written by students rather than scientists. Always find out who the author of the article is before proceeding. Some .org and .com sites are credible, but you need to analyze the content to verify their authenticity. As you review a source, try to answer these questions:
Who authored the article?
Is this person a scientific expert in the species I’m researching?
What is the purpose of the article?
Does the article state facts that scientists can prove with evidence?
Are there opinions in the article?
How old is the article?
Do other credible sources support the statements in this article?
(HELP NOW!!!!!)
Answers
Answer:
hope this help :)
Explanation:
Cancer is the name given to a collection of related diseases. Cancer is more than one type of disease. In cancer, as a result of genetic mutations, this regulatory process malfunctions, resulting in uncontrolled cell proliferation. CAD, Stroke, Respiratory illness, COPD are all diseases related to cancer. Inherited genetic mutations play a major role in about 5 to 10 percent of all cancers. There are many environmental pathogenic factors that can cause cancer. For example , Tar and Coal-Tar Pitch , Emissions , Secondhand Tobacco Smoke (Environmental Tobacco Smoke) , Arsenic , Soot , Asbestos , Wood Dust. When cancer cells break away from a tumor, they can travel to other parts of the body through the bloodstream or the lymph system. Cancer is hard to treat in later stages because it probably has already spread through out the body. The grade of a cancer depends on what the cells look like under a microscope. In general, a lower grade indicates a slower-growing cancer and a higher grade indicates a faster-growing one. Some examples of cancer treatments of cancer are, Surgery, Chemotherapy, Radiotherapy, Cancer drugs, Hormone therapy, Stem cell and bone marrow transplants, Targeted cancer drugs. A new treatment involving a photosensitising agent that makes cells more sensitive to light and, by doing so, causes cancer cells to be destroyed when a laser light is directed on a cancerous area. One challenge is, druggable genomic alterations are diverse and represent only small subsets of patients in certain tumor types, which limits testing their clinical impact in biomarker-driven clinical trials. Next-generation sequencing technologies are increasingly being implemented for molecular prescreening in clinical research, but issues regarding clinical interpretation of large genomic data make their wide clinical use difficult.
GIVING BRAINLIEST!!!!
Answers
Answer:
1. Pecan tree 1 and pecan tree 4
2. I don't know
Explanation:
i need help please help me , god will bless you tonight .
Answers
Answer:
HEHEHE HA
Explanation:
Clash royale
Please help me with this question,giving the first correct answer brainliest
Answers
Answer:
Protons and Electrons (c)
Explanation:
I added my explanation in the comments of the question
Answer:
protons and neutrons
Explanation:
please mark me as brainliest
Hi! I really need help on these questions, it would be great if you can answer them!
Answers
1: Equilibrium
[] When two forces are equal in opposite directions, they are in a state of equilibrium
2: Friction
[] It can be hard to sometimes slide a paper across a table, roll a car across the ground, etc etc. This is because of a force called friction which resists motion
3: Displacement
[] Work is only "done" when the object or surroundings are having movement, or in motion, and this creates displacement
4: Force
[] A force is a push/pull in any direction, this is a simple definition so not much can be added.
5: Inertia
[] Inertia is a force that likes to remain unchanged, or without movement
6: Effort
[] "Meg is holding up weight without movement. She hasn't done any work since it did not move, but is tired. Why?" Effort! She still put in effort even though no "work" happened
7: Work
[] Force times displacement is the equation for work
8: Motion
[] Look back to #3, when there is motion we can tell work is done
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
We observe objects that move and notice changes that happen quickly. Which of the following would be most difficult to observe directly with our eyes?
a fireworks display
burning wood
a temperature change
boiling water in a pot
Answers
Answer: C
Explanation:
A temperature change
Please help me asap .
Answers
Answer:
We use the four properties of sound: pitch, dynamics (loudness or softness), timbre (tone color), and duration.
Answer:
Dynamics, Duration, Pitch, Timbre! Hope this helped
Explanation:
What would be different on Earth if the Moon did not exist?
Answers
2.) The earth would rotate about 3 times faster.
3.) With no moon, the tilt of the Earth’s axis which would cause a large shift in seasons and weather.
4.) There would be no lunar eclipses.
5.) The moon provides a lot of light at night, so if there was no moon, the nights would be extremely dark.
6.) Days would also be much shorter.
I got some of this info from Inside Science in case you need to provide a source.
Which of the following paths correctly displays the transfer of energy for sound?
energy source to detection to medium
detection to an energy source to medium
medium to an energy source to detection
energy source to medium to detection
Answers
Answer:
the energy source, the transfer of energy through a medium,
Explanation:
The three parts of sound consist of the energy source, the transfer of energy through a medium, and the detection of the sound.
A Chef is looking for a new frying pan that will allow her to cook food quickly at temperatures above 500°C. Use the data provided in the table to explain to the Chef which metal would be the best choice for a new frying pan for her kitchen.
What is your claim? Which metal is the best choice? (
What is your evidence?
What is your reasoning?
Answers
Answer:
Explanation:
1st one
What is your evidence?
Very heavy professional or restaurant pans will have iron handles, while those for home use will be made of brass or stainless steel. All are perfectly safe for oven use.