Answer:
6.3986g
Explanation:
The balanced chemical equation of this reaction is as follows:
Pb(NO3)2(aq) + 2KCl (aq) → PbCl2(s) + 2KNO3(aq)
In this equation, 2 moles of KCl solution will produce 1 mole of PbCl2.
To calculate the number of moles of PbCl2 produced, we use the formula:
Molarity = number of moles (n) ÷ volume (V)
0.101 = n/0.46
n = 0.046mol of KCl
If 2 moles of KCl solution will produce 1 mole of PbCl2
Then, 0.046mol of KCl will be react to produce (0.046 × 1/2) of PbCl2
0.046 × 1/2 = 0.023mol of PbCl2
To find the mass of PbCl2 using mole = mass ÷ molar mass
Molar mass of PbCl2 = 207.2 + 35.5(2)
= 207.2 + 71
= 278.2g/mol
0.023 = mass/278.2
mass = 6.3986g
Answer:
Can you help me with other question please
Question of the day
Seeds obtain their energy (food) directly from the soil as soon as they are planted.
True or False?
Answer:
false
Explanation:
it gets nourishment from the storage tissues in the seeds, when it develops into a young plant with roots, then it takes nutrients from the soil
An atom starts with 20 electrons and 20 protons; after a reaction, it has 18 electrons and 20 protons.
Answer:
(+20) + (-18) = +2
Explanation:
Describe the kinds of potential energy that are stored by a car driving on a hill.
Answer:
The internal combustion engine in the car converts the potential chemical energy in gasoline and oxygen into thermal energy which is transformed into the mechanical energy that accelerates the vehicle (increasing its kinetic energy) by causing the pressure and performing the work on the pistons.
Explanation:
Now balance the chemical reaction by providing the correct coefficients:
carbon + fluorine gas yields
carbon tetrafluoride
[?] C+[?]F2 → [?]CF4
A helium balloon with a volume of 5.0 L and a pressure of 105 kPa at 25°C floats up high in the sky where the pressure is 850 mm Hg and the temperature is -15°C. What is the new volume of the balloon?
Answer:
volume 2- 4.011 L
Use this equation to calculate the specific heat capacity of each metal:
cmetal =
c water = sp. heat capacity of water (4.18 J/gC)
m water = mass of the water in the cup
T water = change in water temperature
m metal = mass of the metal
T metal = change in metal temperature
What is the specific heat for the aluminum wire?
What is the specific heat for the steel wire?
What is the specific heat for the lead pellets?
Answer:
What is the specific heat for the aluminum wire?
0.82
What is the specific heat for the steel wire?
0.47
What is the specific heat for the lead pellets?
0.25
Explanation:
Answer:
What is the specific heat for the aluminum wire?
0.82
What is the specific heat for the steel wire?
0.47
What is the specific heat for the lead pellets?
0.25
Explanation:
This is the person above me. All credits go to them.
From the balanced reaction below, when you have 3.33 moles of (NH4)2Cr2O7, how many grams of N2 will be produced
Answer:
[tex]m_{N_2}=93.3gN_2[/tex]
Explanation:
Hello there!
In this case, for this stoichiometry-based problem, it is firstly necessary to realize that the decomposition of ammonium dichromate is given by:
[tex](NH_4)_2Cr_2O_7(s)\rightarrow N_2(g)+4H_2O(l)+Cr_2O_3(s)[/tex]
Thus, since the mole ratio between ammonium dichromate and the gaseous nitrogen (molar mass = 28.02 g/mol) is 1:1, we can compute the produced mass of the latter via stoichiometry as shown below:
[tex]m_{N_2}=3.33mol(NH_4)_2Cr_2O_7*\frac{1molN_2}{1mol(NH_4)_2Cr_2O_7}*\frac{28.01gN_2}{1molN_2}\\\\ m_{N_2}=93.3gN_2[/tex]
Best regards!
The following diagram on the left represents the copper nitrate solution in the half‑cell before the galvanic cell starts to operate. In the following diagram on the right, draw a representation of the solution in the same half‑cell after the galvanic cell has been operating for some time and is still producing a voltage.
Before reaction : 4 Cu2+ molecules and 8NO3-
Answer:
There is too much here for me to attempt in one sitting, but I will get you started and give suggestions that may help you proceed on your own.
a) As far as I can tell, you didn't provide the reduction potentials in the table below. So, I looked them up and find them to be
Cu2+ +2e- ==> Cu(s) Eº = +0.34 V
Zn2+ + 2e- ==> Zn(s) Eº = -0.76 V
Net ionic equation: Cu2+(aq) + Zn(s) ==> Cu(s) + Zn2+(aq)
b) Eºcell = 0.34 V + 0.76 V = 1.10 V
c) ∆Gº = -nFEº where n = number of electrons transferred (2) and F = 96,485 C/mol e- and Eº = 1.1 V
d) Again, there is no diagram
e) same
f) Use the Nernst equation Ecell = Eºcell - 2.303RT/nF log Q where R = 8.314; T = Kelvin; F = Faraday const. and Q = reaction quotient, i.e. products/reactants
g) the cell voltage is an intensive property. That should help you answer this part of the question
Explanation:
its not much but i hoped this helped
Texas hill country is largely composed of soft limestone rock. When exposed to carbonic acid in rainwater, limestone can deteriorate and weaken. What affect does this process have on the landforms of Texas hill country?
Answer:
The answer is "It leads to the formation of underground caves"
Explanation:
Texas Hill Land is popular for its rolling hills, good wine, and authentic food. Its Texas Hill Property appeal is no mystery, recognized as being one of the top vacation destinations in the World. Texas Hill Structure is primarily mostly of weak calcareous stone. Calcium may worsen or degrade if exposed to carbon dioxide in rainwater. This practice affects the land of the Texas smoky Mountains leading to the formation of underwater groves.
The probability?????????????????
what is the only thing that stops gamma rays?
The Answer is LEAD ......................
A gas system has an initial number of moles of 0.693 moles with the volume unknown. When the number of moles changes to 0.928 moles volume is found to be 7.98 L. What was the initial volume in mL?
Answer:
The initial volume in mL is 5959.2 mL
Explanation:
As the number of moles of a gas increases, the volume also increases. Hence, number of moles and volumes are directly proportional i.e
n ∝ V
Where n is the number of moles and V is the volume
Then, n = cV
c is the proportionality constant
∴n/V = c
Hence n₁/V₁ = n₂/V₂
Where n₁ is the initial number of moles
V₁ is the initial volume
n₂ is the final number of moles
and V₂ is the final volume.
From the question,
n₁ = 0.693 moles
V₁ = ?
n₂ = 0.928 moles
V₂ = 7.98 L
Putting the values into the equation
n₁/V₁ = n₂/V₂
0.693 / V₁ = 0.928 / 7.98
Cross multiply
∴ 0.928V₁ = 0.693 × 7.98
0.928V₁ = 5.53014
V₁ = 5.53014/0.928
V₁ = 5.9592 L
To convert to mL, multiply by 1000
∴ V₁ = 5.9592 × 1000 mL
V₁ = 5959.2 mL
Hence, the initial volume in mL is 5959.2 mL
Define Evaporation.
Thanks
Answer:
evapouration is a type of vaporization that occur on the surface of liquid as it change into the gas phase.
hope it helps.
Evaporation happens when a liquid turns into a gas. It can be easily visualized when rain puddles “disappear” on a hot day or when wet clothes dry in the sun.
where is the magnitude of force of magnetism the greatest
Answer:
The strength of the field varies depending on its location around the magnet. The magnetic field of a bar magnet is strongest at either pole of the magnet. It is equally strong at the north pole when compared with the south pole.
Explanation:
The disinfectant hydrogen peroxide (H2O2)
decomposes to form water and oxygen gas.
How much O2 will result from the decomposition of 7.6 mol of hydrogen peroxide?
Answer in units of mol.
Answer: amount of O2 is 3.8 moles
Explanation: reaction. 2 H2O2 -> 2 H2O + O2
Two moles H2O2. Produces one ole Oxygen
A single atom of an element has 11 protons, 11 electrons, and 12 neutrons. Which element is it?
OV
Na
Mg
Se
Save and Frit
Answer:
Na
Explanation:
Sodium
5 Which two elements are combined in magnesium oxide?
Answer:
magnesium and oxygen
Explanation:
Identify Acid, Base, Conjugate acid, and base pairs in the following: HPO2 + NH" -> H-PO, + NH, Conjugate Acid ,HPO 2 Acid NH, ΝΗ, Base H PO Conjugate Base I need answers now
Answer:
no ablo inglés porfavor amigos
gas
LA of certain mass occupies a volume of 650 cm3 under
a pressure of 760mmHg. Calculate the pressure under which
the volume of the
gas
cent
of its original volume
will be reduced by 10 per
Answer:
844.4cm³
Explanation:
Using Boyle's law equation;
P1V1 = P2V2
Where;
P1 = initial pressure (mmHg)
P2 = final pressure (mmHg)
V1 = initial volume (cm³)
V2 = final volume (cm³)
According to the information in this question,
V1 = 650cm³
P1 = 760mmHg
P2 = ?
V2 = 10% reduction of V1
10% of 650 = 10/100 × 650
65
V2 = 650 - 65 = 585cm³
Using P1V1 = P2V2
P2 = P1V1 ÷ V2
P2 = (760 × 650) ÷ 585
P2 = 494000 ÷ 585
P2 = 844.44
final pressure (P2) = 844.4cm³
How many moles of oxygen are required to react with 12 moles of FeS2?
4FeS2 + 11O2 → 2Fe2O3 + 8SO2
find the empirical formula for
42.05g of nitrogen, 95.95 of oxygen
and
7.33g of lanthanum, 2.96g of oxygen
Answer:
[tex]NO_2[/tex] and [tex]La_2O_7[/tex]
Explanation:
Nitrogen:
[tex]\frac{42.05}{14}=3[/tex]
Oxygen:
[tex]\frac{95.95}{16}=6[/tex]
Ratio:
[tex]3:6=1:2[/tex]
So empirical formula becomes [tex]NO_2[/tex]
-----
Lanthanum:
[tex]\frac{7.33}{139}=0.0527[/tex]
Oxygen:
[tex]\frac{2.96}{16}=0.185[/tex]
Ratio:
[tex]0.0527:0.185=1:3.5=2:7[/tex]
So empirical formula becomes [tex]La_2O_7[/tex]
The temperature of 335 g of water changed from 24.5oC to 26.4oC. How much heat did this sample absorb? C for water = 4.18 J/goC
Answer: The sample absorbed 3061.565J
Explanation:
Given that
Mass of water = 335g
Initial temperature = 24.5°C
Final temperature = 26.4°C
Heat absorbed by the sample is given as = mass x specific heat of water x temperature change
Heat absorbed,q=mCΔt
The specific heat of water,C = 4.81J/g°C
Therefore, Heat absorbed,q = 335 x 4.81h x (26.4 - 24.5) = 3061.565J
Answer:
2660.57 J
Explanation:
26.4 - 24.5 = 1.9
335 x 4.18 x 1.9 = 2660.57 J
That is the correct answer.
What is a limitation for using solar energy to meet global energy needs?
Answer:
The sun provides more than enough energy to meet the whole world's energy needs, and unlike fossil fuels, it won't run out anytime soon. As a renewable energy source, the only limitation of solar power is our ability to turn it into electricity in an efficient and cost-effective way.
For a reaction which change can increase the rates of reaction?
Answer:
temperature!!!
Explanation:
Reactant concentration, the physical state of the reactants, and surface area, temperature, and the presence of a catalyst are the four main factors that affect reaction rate.
How is evaporation related to molarity?
Answer:
Molarity is the amount (in mole) of solute in a solvent. If the solute is very volatile, then it will evaporated from the solution as temperature rising. So the amount of solute is decreasing, causing the molarity decreasing. If the solvent itself volatile, then the molarity will increase.
(Looked up the answer for you)
The relationship between evaporation and molarity is; the rate of evaporation of will decrease as the molarity increases
What is evaporation and molarity?
Molarity (M) is defined as the amount of a substance in a certain volume of solution. Molarity can also be defined as the number of moles of a solute per liters of a solution.
Now, the rate of evaporation of will decrease as the solute concentration increases due to the fact that for the same surface area for evaporation, as the concentration of the solute increases, less water molecules will get exposed to escape from the water surface.
Read more about Evaporation and Molarity at; https://brainly.com/question/14718840
Does anyone know the simplest way to find the rate constant in rate law chemistry?
Answer:no I don’t sorry
Explanation:
If you can solve these thank you I will mark brainly.ASAP
Answer:Number 2 might be the second one
Explanation:
Carlotta notices that the words of a book are blurry, but a sign across the road is not. What might correct Carlotta’s vision?
a diverging lens, to fix her farsightedness
a diverging lens, to fix her nearsightedness
a converging lens, to fix her farsightedness
a converging lens, to fix her nearsightedness
hurry plz
Answer:
C.
Explanation:
Un convertidor catalítico acelera la reacción del monóxido de carbono con oxígeno para producir dióxido de carbono. ¿De qué manera cada uno de los siguientes cambios afectaría la velocidad de reacción que se muestra aquí? Sustente 2CO (g) + O2(g) → 2CO2(g) a). Quitar el catalizador. B). Eliminar parte de O2(g)
Answer:
a. Disminuye.
b. Disminuye.
Explanation:
¡Hola!
En este caso, considerando que tenemos una reacción en la cual se podría asumir que tanto la concentración de monóxido de carbono y la de oxígeno contribuye a la velocidad de reacción, de acuerdo a la siguiente cinética elemental:
[tex]r=k[CO]^2[O_2][/tex]
Al aplicar los siguientes cambios, resultaría:
a. En este caso, bien sabemos que la velocidad de reacción es aumentada al adicionar un catalizador ya que la constante de velocidad aumenta al disminuir la energía de activación; no obstante, al retirar el catalizador, la energía de activación aumentaría y por consiguiente la velocidad de reacción disminuiría.
b. En este caso, dado que la relación entre el oxígeno y la rapidez de reacción es directamente proporcional, es possible para nosotros determinar que al eliminar parte del oxígeno, la concentración disminuye y por ende la velocidad de reacción también.
¡Saludos!
When a mixture of iron powder and sulphur is heated it glows more brightly than that of iron filings and sulphur.Explain this observation
Answer:
I don't know
Explanation:
mixture of iron powder and sulphur heated it glows because sulphur and iron are more reactive metals that they shine and sulphur can react with water produce fire it's write