please can any one answer for this question​

Please Can Any One Answer For This Question

Answers

Answer 1

Answer:

S = 1/2 g t^2        time for stone to fall distance S

S = V0 (t - 2) * 1/2 g (t -2)^2     time for stone to fall distance S with an initial speed of 30 m/s, 2 seconds later

1/2 g t^2 = V0 t - 2 V0 + 1/2 g t^2 - 2 g t + 2 g     equating distance fallen

t = 3.88 sec

Check:

S = 1/2 * 9.8 * 3.88^2 = 73.8 m

S = 30 * 1.88 + 1/2 * 9.8 * 1.88^2 = 73.7 m


Related Questions

consider the circuit shown in (figure 1). the initial current in the inductor is is(0+) = 0.

Answers

The questions is incomplete so I answered it in general way.

I= 1/L∫Vdt, where I is the current flowing through the inductor, L is the inductor's inductance, and V is the voltage across the inductor, is the formula that determines the inductor current depending on these input parameters. You will frequently come across the expanded formula I= I0 + 1/L∫Vdt.

A passive two-terminal electrical device known as an inductor, also known as a coil, choke, or reactor, stores energy in a magnetic field as electric current passes through it. Typically, an inductor is made out of insulated wire twisted into a coil.

According to Faraday's law of induction, when the current through the coil changes, the time-varying magnetic field induces an electromotive force (emf) (voltage) in the conductor. Lenz's law states that the induced voltage has an opposing polarity (direction) to the change in current that caused it. Inductors so reject any changes in the current flowing through them.

To know more about inductor

https://brainly.com/question/15893850

#SPJ4

Why do people use sonar under water?

Answers

Due to the fact that sound waves travel further in water than radar and light waves do, sonar, which stands for Sound Navigation and Ranging, is useful for exploring and mapping the ocean.

How does underwater sonar operate?

By sending ultrasonic waves into the water and listening for the returned echoes, a sonar may find these items. The distribution, density, and movement of a school of fish can be seen on the Sonar display at an angle of 360° or 180° in all directions.

Can sonar identify undersea humans?

To "see" in the water, sonar uses sound waves. To find underwater shipwrecks, bodies of people, and other objects, as well as to determine the circumstances of their drowning, sonar is a very valuable tool.

To know more about sonar, visit:

brainly.com/question/20510435

#SPJ4

According to the diagram, the approximate abundance of oxygen atoms in the galaxy is __________.
1/10 that of hydrogen
1/100 that of hydrogen
1/1000 that of hydrogen
1/10,000 that of hydrogen

Answers

According to diagram, the approximate abundance of oxygen atoms in the galaxy is 1/1000 that of hydrogen.

If we look along the vertical axis, we find that the point for oxygen lies about halfway between the points  10−4 and 10−2, near to 10−3, which is 0.001 or 1/1000. Therefore, the abundance of oxygen atoms is about 1/1000 that of hydrogen.

The general trend in elemental abundance in our galaxy: There is a general trend of increasing abundance with increasing atomic number. Exceptional rule is that elements with odd atomic numbers tend to be more abundant compared to elements with even atomic numbers. These abundances decrease smoothly from atomic number of 6 to atomic number of 20. These abundances fluctuate randomly.

To know more about galaxy here

brainly.com/question/2905713

#SPJ4

What are elements with 2 electrons called?

Answers

Elements with 2 electrons are called as Group 2 Elements.

As the name says elements with 2 electrons.

Such elements have 2 electrons in their outermost orbit, due to the presence of these 2 electrons in the outermost orbit such elements are not stable.

So, for becoming stable and completing the octet in the outermost orbit the elements need to lose their 2 electrons which are present in the outermost orbit.

Some common examples of such elements is Magnesium, Calcium, and Strontium.

The valency of such elements is 2.

As we know, valency is nothing but the number of electrons which are either lost or taken by the atom for completing their octet.

For more questions on Cations and Anions

https://brainly.com/question/29881978

#SPJ4

Can somebody answer this

Answers

Answer:

answer is c

Explanation:

....................

a circus performer is coasting in a small cart at a velocity of 3.5 m/s east. As she coasts, she collided with a small weighted juggling pin that was at rest in the ground.

Answers

The momentum of the performer and cart will decrease.  The momentum of the juggling pin increases. The overall momentum of the entire system will remain the same.

What is law of conservation of linear momentum?

According to the law of conservation of momentum, the sum of the momentum of a body before and after the collision will be equal.

m₁.u₁ + m₂u₂ = m₁ v₁ + m₂.v₂

where m₁ & m₂ is the mass of objects, u₁ & u₂ are their initial speed while v₁ & v₂ is final speed.

Given the initial velocity of the performer and cart is u₁ = 3.5 m/s

The final velocity of the performer and cart = 3.4 m/s

As the velocity of the performer and cart decreases therefore its momentum will increase.

The juggling pin was at rest initially, but its velocity increased from 0 to 6 m/s. Therefore its momentum increases.

Learn more about the law of conservation of linear momentum, here:

brainly.com/question/17140635

#SPJ1

a race car completes the final lap of a race on a 2-kilometer circular track. at the start of the lap, it crosses the line at 60 meters/second. it completes the lap 28.57 seconds later, crossing the line at 85 meters/second. calculate the displacement and average acceleration of the car along the track over the course of the final lap.

Answers

The average acceleration is (0.88 m/s2) given that (85 m/s - 60 m/s)/28.57 s.

A. The distance travelled is 0 metres, and the speed is 0.88 metres per second.

B. The distance travelled is 2,000 metres, and the speed is 1.14 metres per second.

C. The distance travelled is 0 metres, and the speed is 70.0 metres per second2.

D. The distance travelled is 2,000 metres, and the speed is 80.0 metres per second.

E. The distance travelled is 0 metres, and the speed is 0.70 metres per second2.

Displacement is a change in position over a predetermined period of time. The displacement is 0 since the initial and final positions are equal.

-

Average acceleration is the result of changing time and velocity. As a result, the average acceleration is (0.88 m/s2) given that (85 m/s - 60 m/s)/28.57 s.

Know more about acceleration at:

https://brainly.com/question/25749514

#SPJ4

Three students observe a toy car rolling across a level floor until it slows to a stop. After the observation, they make these statements: Max: "Energy is conserved, but friction turned it into heat, warming the floor and wheels." Chris: "But it stops. Energy is not conserved. The car's kinetic energy disappeared." Sam: "But energy can't just disappear. It must have become potential energy." Which student was correct?

Answers

Answer:

max

Explanation:

in this case Chris said that the car stops which means that its energy has disappear we know that this is wrong because energy can't just disappear energy can't be destroyed and Sam told that energy can't be the towards so it should have become potential energy in order for a body to be up converted into potential energy we need to change its position in respect to gravity in this case is position is not change in respect to gravity where is Max is correct because due to the production of wastage energy each energy and sound energy is produced due to friction and that's what stop the car

Which of the following statements is false? The magnetic field of a current-carrying wiredepends on the magnitude of the current. decreases inversely with the distance from the wire. is directed circularly around the wire. exists only if the current in the wire is changing.

Answers

The magnetic field produced by a conductor that is carrying current relies on the conductor's current and the point's distance from it. The magnetic field runs parallel to the wire in a perpendicular direction.

Given by r = 2 m and B = 5, the magnetic field strength created by a straight wire carrying current is 5. Inquiry 4: As seen in the diagram below, a straight conductor carrying a current of 10A is parallel to another conductor carrying a current of 5A on the other side. Since all closed-loop currents make their own magnetic fields and magnetic fields operating on closed-loop circuits may produce current, magnetism and electricity are closely related. Oersted made the discovery that electric current had a magnetic influence.

To learn more about magnetic field please click on below link

https://brainly.com/question/14848188

#SPJ4

draw the structure of the product(s) obtained when d-ribose reacts with br2/h2o/caco3

Answers

The balance of the equation 2Br2 + CaCO3 + H2O = CaBr2 + CO2 + 2HBrO is ensured by the equal distribution of each element between the reactants and the products.

Bromination can take place in a number of ways, depending on the reactant. A saturated molecule is bromine using the free radical technique. An unsaturated hydrocarbon undergoes bromination through an addition mechanism. An aromatic compound is bromined by an electrophilic substitution procedure.

Meta-bromo-benzoic acid and hydrogen bromide are the end products of the chemical reaction between bromine and benzoic acid described above. The bromine water test is a simple way to tell fructose from glucose. The glucose undergoes an oxidation reaction to produce glucuronic acid after interacting with the bromine water solution. Since bromine water has a modest oxidizing effect, fructose does not oxidize in it.

To know more about reactants

https://brainly.com/question/16856363

#SPJ4

What causes magnetic stripes to form?

Answers

Answer:

The striped magnetic pattern develops because, as oceanic crust pulls apart, magma rises to the surface at mid-ocean ridges and spills out to create new bands of ocean floor. Later, after the planet’s magnetic field flips again, the next stripe of new ocean floor aligns its polarity.

Explanation:

hope this helps!

IM BEGGING IVE LITERALLY LOST HOPE AND I REALLY NEED HELP PROPER ANSWE PLEASEEEE

Complete the values in the table, assuming that all projectiles are launched horizontally and fall
downwards with an acceleration of 9.8 ms 2. Give all your answers to 2 significant figures.
Find the time to reach target and distance fallen

Answers

Time to reach target / s---> B4.1, Distance fallen / m,----> B4.2,

What is the connection between time and acceleration?

The magnitude of the velocity change increases with lengthier acceleration. When acceleration is constant, the change in velocity is directly proportional to time. If velocity grows by a particular amount during a specific period of time, it ought to do so by an equal amount over an equal period of time.

What is the distance-time formula for acceleration?

The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2). ​

to know more about acceleration here:

brainly.com/question/2303856

#SPJ1

1.24 × 107 kilograms. Write the mass in standard notation.

Answers

The product of 1.24 and 107 kilograms expressed in standard form is 1.3268 x 10² kg.

What is standard form?

A standard form is a form of writing equations, numbers, or expressions using a certain set of rules.

Standard form is a method often used by scientists to express large number into a more condensed form, usually in power of ten.

The product of 1.24 and 107 kilograms expressed in standard form is calculated as;

1.24 x 107 kg = 132.68 kg

in standard form = 1.3268 x 10² kg

Thus, numbers expressed in standard forms makes it very easy to represent and recall the number.

Learn more about standard form here: https://brainly.com/question/19169731

#SPJ1

What does λ mean in the wave equation?

Answers

In physics, the symbol λ (lambda) is used to represent the wavelength of a wave.
What is wave equation?
Wave equation is an equation that describes the behavior of waves, such as sound and light. It is used to analyze wave patterns and their interactions. Wave equations can be used to describe the propagation of waves in different media, such as air, water, and solids. Wave equations are also used to study wave phenomena, including resonance, diffraction, interference, and scattering.
It is typically used in the wave equation, which describes the relationship between the speed, frequency, and wavelength of a wave. λ is usually represented by the Greek letter lambda and is used to calculate the speed of a wave in a medium or vacuum. λ can also be used to calculate the frequency of a wave when the speed and wavelength are known.
To know more about wave equation click-
https://brainly.com/question/25699025
#SPJ4

in an experiment with n = 6 and preal = 0.15, what is the power using a = 0.012 tail?

Answers

An experiment with an a = 0.012 tail when N = 6 & Preal = 0.15 powered  is 1.0000

A scientific experiment where you do a series of actions and carefully track their outcomes to learn new knowledge. The students will conduct basic laboratory experiments. run, do, perform, or carry out an experiment.

Because it provides scientists with a set of well-organized steps to perform in order to reply to questions or assertions about the natural world, experimentation is essential to science. Additionally, experimenting produces vital data and results that help to verify the veracity and dependability of assertions made in an endeavor to fully know the world.

To know more about experiment

https://brainly.com/question/22967013

#SPJ4

What is the ionic compound for MgBr2?

Answers

The ionic compound for [tex]MgBr_2[/tex] magnesium.

Magnesium bromide is the chemical compound known as [tex]MgBr_2[/tex].

We are aware that ionic compounds are made up of two ions, one of which is a positive-charged cation and the other a negative-charged anion. For instance, when we separate ionic compounds into their constituent ions, we obtain cations and anion.

(a), Breaking of [tex]$\mathrm{MgBr}_2$[/tex] into ions '

[tex]\left.\mathrm{MgBr}_2_(aq) \longrightarrow \mathrm{Mg}_{(\mathrm{aq})}^{2+}+2 \mathrm{Br}_{\left(a q_1\right)}{ }^2\right[/tex]

Cation formula [tex]$=Mg^{2+} (a q)$[/tex]

Anion Formula [tex]$=\mathrm{Br}^{\ominus}(a q)$[/tex]

(b) Breaking of [tex]$\mathrm{FeCl}_3$[/tex] into ions [tex]$\mathrm{L}$[/tex]

[tex]Fecl_{3(aq)}\rightarrow Fe^{3+}(aq)+3cl^-(aq)[/tex]

i.e Cation formula [tex]$=$ fe^ {+3}[/tex]

Anion formula [tex]$=cl^{\theta}(a q)$[/tex]

For more such question on ionic compound.

https://brainly.com/question/2687188

#SPJ4

what parameters do hubble's law relate to each other? galaxy rotation speed and luminosity galaxy classification and mass cepheid star period and luminosity galaxy recession velocity and distance galaxy mass and distance

Answers

The fundamental relationship between recessional velocity and distance is known as Hubble's law. The relationship between recessional velocity and redshift, excepting very small redshifts, depends on the cosmological model used.

What can we infer about the connection between distance and recessional velocity from Hubble's law?

One observational consequence of the expansion is that galaxies appear to move away from you more quickly the further they are from you. As a result, the recessional velocity and distance are related. The Hubble's Law is the name of this phenomenon.

What main principle underlies Hubble's law?

In big bang cosmology, the Hubble law postulates that galaxies move away from the Earth at a rate that is proportional to their distance.

To know more about Hubble's law visit:-

https://brainly.com/question/13705068

#SPJ4

Part A Determine the equivalent capacitance between points a and b for the combination of capacitors shown in (Figure 1). Express your answer in terms of the variables C1, C2, C3, and C4. O AO in O 2 ? Cab = Submit Request Answer

Answers

The equivalent capacitance between points a and b for the combination of capacitors shown in Figure 1 is equal to C1 + C2 + C3 + C4.

The equivalent capacitance between points a and b for the combination of capacitors shown in Figure 1 can be determined by evaluating the capacitances of each individual capacitor and then adding them together. The capacitance of C1 is directly connected between points a and b, so it is simply C1. The capacitance of C2 and C3 are in parallel, so the equivalent capacitance of these two is C2 + C3. Similarly, the capacitance of C4 is in parallel with C2 + C3, so the equivalent capacitance of the combination is C1 + C2 + C3 + C4. Therefore, the equivalent capacitance between points a and b for the combination of capacitors shown in Figure 1 is equal to C1 + C2 + C3 + C4.

Learn more about capacitance here

https://brainly.com/question/13200919

#SPJ4

How is the rule for the interaction between magnetic poles similar to the rule for the interaction between electrically charged particles?

Answers

In that, it states that similar poles repel, unlike poles attract and that the force is proportional to the inverse square of the distance between two poles.

The pushing or tugging of an object is considered to be exerting force. Whenever two things interact, push and pull are the result. Stretching and crushing are further examples of force expressions.

An external agent known as a force has the power to alter a body's state of rest or motion. There is a direction and a magnitude to it. When applying force, it is important to consider both the direction of the force and the actual application of the force.

You should emphasize this as the main point of your education at this level because a push or a pull is referred to as a force. In our daily lives, forces appear in many different ways.

Learn more about force here:

https://brainly.com/question/29096913

#SPJ4

What is the relationship between wavelength and frequency Mcq?

Answers

The equation =c/f relates wavelength and frequency. There is an inverse relationship between wavelength and frequency.

What connection exists between the frequency and wavelength of EM waves?

One crucial equation connects them all: The speed of light is equal to the frequency times the wavelength of any electromagnetic wave. If we know the other measurement, we can use this connection to calculate the wavelength and frequency of the any electromagnetic wave.

What is a wavelength differs from a frequency in ways?

The distance between the crests of two waves is known as the wavelength, which also applies to troughs. The number of vibrations that pass across a certain area in a second is the frequency, which is expressed in seconds per cycle (Hz) (Hertz). This article discusses how wavelength and frequency relate to one another.

To know more about Wavelength and frequency visit:

https://brainly.com/question/2288272

#SPJ4

value: 10.00 points The embroyblast eventually differentiates into the O zygote. O blastocyst O primary germ layers. O sperm and egg ReferenceseBook & Resources Multiple Choice

Answers

The zygote has only one cell. The embryo has many cells. A zygote is known as a zygocyte in medicine. A diploid eukaryote is the name given to the embryo. During the zygote's mitosis, an embryo is created.

A stage after the zygote stage is an embryo. Fertilization is the process that creates the zygote. Human blastocyst (day 5), also known as a blastula, is the term used to describe the hollow cellular mass that develops in the early stages of development. The blastocyst is made up of cells that form an inner cell mass (ICM, embryo blast), an exterior trophectoderm (TE, trophoblast) layer, and a blastocoel (fluid-filled cavity). The first week after conception is when the zygote stage develops. The mix of DNA in the zygote's genome is.

To learn more about zygocyte please click on below link

https://brainly.com/question/29769026

#SPJ4

What is the mass of an airplane that is flying at 246 m/s and has a momentum of 1.968 x 107 kg-m/s? Show your work.

Answers

The mass of an airplane is  79878 kg.

What is momentum?

The product of a particle's mass and velocity is its momentum. Momentum is a vector quantity, meaning it has both magnitude and direction. According to Isaac Newton's second equation of motion, the force acting on a particle equals the time rate of change of momentum.

Given that: an airplane is flying at 246 m/s and has a momentum of 1.968 x 10^7 kg-m/s.

Hence, mass of the airplane = momentum of the airplane/speed

=  (1.968 x 10^7 kg-m/s)/246 m/s

= 79878 kg.

Learn more about  momentum here:

https://brainly.com/question/24030570

#SPJ1

A microwave has a frequency of
90 GHZ. What is the energy of
electromagnetic radiation from
the microwave?

Answers

The energy of the electromagnetic radiation from the microwave is equal to 5.96 × 10⁻²³ J.

What is photon energy?

The energy carried by one photon of any electromagnetic radiation is known as photon energy. This energy is directly proportional to the frequency of electromagnetic radiations and inversely proportional to their wavelength.

To calculate the energy of the photon, we can use the following relation:

The mathematical formula of energy of photon: E = hc/λ

where E is energy, h = Planck's Constant is equal to  6.626 × 10⁻³⁴ Js and c = speed of light = 3 ×10⁸ms⁻¹, λ is wavelength of light

Given, the frequency of the electromagnetic radiation, ν = 90 GHz

ν = 90 ×10⁹ Hz

The energy of one photon microwave radiations is equal to E = hν

E = 6.626 × 10⁻³⁴Js ×  90 ×10⁹ s⁻¹

E = 596.34 × 10⁻²⁵

E = 5.96 × 10⁻²³ J

Learn more about photon energy, here:

brainly.com/question/11016364

#SPJ1

(6) Different colors of light correspond to different: (I) frequencies (II) intensities (III) wavelengths (A) I only (B) Il only (C) Ill only (D) I and IlI (E) all of the above

Answers

Answer:e all of the above

Explanation:

if the water pressure at a pump station at sea level is 4,000,000 pa, how high can the water be pumped uphill, and how fast will it flow out of a faucet at a washing station at sea level? group of answer choices 408 m; 45 m/s

Answers

At a washing station at sea level, the water is pushed 408 meters uphill and flows out of a faucet at 45 meters per second.

What is the water pump's pressure?

According to the needs of the application, the discharge water is pressured. The water is pressurized to 3000psi to 5000psi for cleaning applications. They are extremely highly pressurized in the pressure ranges of 30000psi to 50000psi for cutting purposes. Water that must be pushed in a specific length of time is called a flow rate.

How are water pumps operated?

Wastewater or sewage is gathered at a pump station and kept there in a chamber. When the level of collected sewage reaches its maximum, a high-pressure integrated pump is used to lift the sewage through a discharge system. 

To know more about water pressure visit:-

https://brainly.com/question/15188101

#SPJ4

When an object is moved from rest at a point A to rest atpoint B in a gravitational field, the net work done by thefield depends on the mass of the object and

1. the velocity of the object as it moves between A andB
2. the positions of A and B
3. both the positions of A and B and the pathtaken between them
4. the path taken between A and B only
5. the nature of the external force moving the object fromA to B

Answers

When an object is moved from rest at a point A to rest at point B in a gravitational field, the net work done by the field depends on the mass of the object (4) the path taken between A and B only.

The work done depends on the mass, acceleration due to gravitation and height. Hence, the distance between point A and point B affects the net work done by the objects.

Work done = mass X acceleration due to gravity X height

= W = mgh

where,

Mass of the object = m

Acceleration due to gravity = g

Height between the object = h

To know more about Work done:

https://brainly.com/question/14993089

#SPJ4

A mass spectrometer has a magnetic field of 5.00 mT. It is used to test an unknown particle which has a charge of 2e and is travelling at 100 m/s. If the resulting radius of curvature for the ion is measured to be 1.67 mm:

A. What is the particle's mass?
B. Which element is it? (You may require a periodic table.)

Answers

Answer:

A mass spectrometer uses a magnetic field to separate ions based on their mass-to-charge ratio. The mass of an ion can be calculated from its charge, velocity, and the radius of curvature of its path in the magnetic field, using the formula m = (qBv)/(2πr), where m is the mass, q is the charge, B is the magnetic field, v is the velocity, and r is the radius of curvature.

In this case, the magnetic field is 5.00 mT, the charge of the unknown particle is 2e, and its velocity is 100 m/s. The radius of curvature of the ion's path is measured to be 1.67 mm. Plugging these values into the formula above, we get:

m = (2e * 5.00 mT * 100 m/s) / (2π * 1.67 mm) = 0.24 g/mol

Therefore, the mass of the unknown particle is 0.24 g/mol.

To determine which element the particle is, we can use the periodic table to find an element with a mass-to-charge ratio of 0.24 g/mol. The element with the closest match is magnesium (Mg), which has a mass-to-charge ratio of 24.31 g/mol. Therefore, the unknown particle is likely to be a magnesium ion (Mg²⁺).

a lathe rotating at is used to reduce the diameter of an long section of stock metal rod from a diameter of to at a feed rate of . the force measured at the tool post was down and pulling the tool toward the workpart. what is the specific energy of this material?

Answers

If a lathe turning at a feed rate is used to decrease a long section the stock metal rod's diameter from a diameter of to, the material's specific energy M RR = 109.96 cm3/min.

In hydrology, what is specific energy?

At any cross-section section of a canal, measured just above channel bottom, the total energy per cent weight of fluid. Where y is the flow depth, v seems to be the average velocity, & g is gravitational attraction, makes up the formula for specific energy, or E.

What is a substance's particular energy?

The proportion of necessary energy (E) towards the volume of removed material is referred to as specific energy (SE) (V). This variable can be used to calculate how much energy is expended on removing material.

To know more about specific energy visit;

https://brainly.com/question/29829977

#SPJ4

Which is not a property of covalent solids?
A brittleness
B high melting point
C high lattice energy

Answers

Covalent solids exhibit low melting points and boiling points. Therefore, option B is correct.

What are covalent compounds?

In a covalent compound, the covalent bond is formed by the mutual sharing of electrons that can hold all molecules together. Shared electron pairs are difficult to give away as nuclei of two elements together share the electrons therefore these types of bonds are stronger.

A covalent network solid can be described as a chemical compound in which the atoms are bonded by covalent bonds in a continuous network. The covalent solids are generally brittle in nature.

The melting points for covalent solids are generally low while high melting points for ionic solids.

Learn more about the covalent compound, here:

brainly.com/question/12144907

#SPJ1

should the speed of the goose be increased or decreased to make the total momentum of the three birds add up to zero? verify your answer by calculating the required speed

Answers

The birds' collective momentum is in the same direction as a goose's, i.e., the right way, but the goose's momentum is more than that of two ducks.

In order to make the goose's overall momentum zero, we employ the idea of momentum to determine the lowered speed.Given that the speed of the goose is greater than the sum of the speeds of the two ducks, it is necessary to decrease the momentum of the goose in order to zero out the overall momentum.P total = Pd + Pd + Pg

       0=-2md vd + mg vg

       2md vd/ mg = v g =2 (40) (1.1) /7.6kg

       vg =1.2m/s

       when total momentum is set to zero.

​For more information on momentum kindly visit to

https://brainly.com/question/24030570

#SPJ1

Other Questions
Question 1 (1 point)The two main types of lithospheric plates are oceanic plates and continental plates. What happens along a convergent boundary between an oceanic plate and a continental plate? aThe two plates push against each other, producing a fault-block mountain. bPressure builds up, causing earthquakes to occur in the middle of the ocean. cThe oceanic plate is subducted beneath the continental plate, forming a subduction zone. dThe continental plate is subducted beneath the oceanic plate, forming a subduction zone. What is a central democracy? Which force comes into play when an object starts to move on a surface? How far apart are Y and L? Give your answer in map units. (Hint: Add the numbers of the two recombinant types, divide by the total number of offspring, and multiply by 100.) Find the equation perpendicular to y=-2x+10 through (10,7) the word part that completes the medical term meaning inflammation within the eye, end/ /itis, is Rewrite the expression as a single logarithmPlease help will give brainlist only if correct! Which formula can be used to find the nth term of the geometric sequence 1/6,1,6,36? Which of the following represents an infrastructural factor that firms must consider when selecting an FDI location?A) size and growth of national marketB) political stabilityC) availability and quality of local manufacturingD) stability of currency Does GDP cause unemployment? What is value of expression example? What is the diameter of a capillary tube in which mercury? Which of the following characteristics would you expect Al's Autos to have? Check all that apply.(A) Decision making in this company is centralized, with the CEO ultimately responsible for problem solving.(B) Employees receive extensive training specific areas, leading to the development of in-depth expertise.(C) There is extensive communication between employees in different departments of this company.(D) Employee specialization leads to increased efficiency. What are 4 types of local government structures? Categorize the compounds below as meso or non-meso species. 10th attempt See Periodic Table See Hint Items (6 images) (Drag and drop into the appropriate area below) mon Categories Meso Compounds Non-Meso Compounds Drag and drop here Drag and drop here U7 QueSLIUI 11 point Categorize the compounds below as meso or non-meso species. 10th attempt See Periodic Table See Hint Items (6 images) /Drag and drop into the appropriate area below) OH Categories Meso Compounds Non-Meso Compounds Drag and droghere activex is used by developers to create active content. true or false What is one way in which the supreme court decisions in mapp v. Ohio (1961), gideon v. Wainwright (1963), and miranda v. Arizona (1966) are similar?. The graph of the linear function passes through points (2, 44) and (5, 80). What is the equation of the function? PLEASE HELP!! I WILL MARK BRAINLIEST!!! HELPP PLEASE!! Since 1949, Beijing has been the seat of government for ________ and Taiwan has been the home to ________.A. the Chinese Communist Party; the NationalistsB. the Nationalists; the Chinese Communist PartyC. capitalist leaders; communist intellectualsD. Jiang Jieshi; Mao Zedong A local manufacturing firm produces four different metal products, each of which must be machined, polished, and assembled. The specific time requirements for each product are as follows: Machining hours Polishing hours Assembling hours Unit profit $Product 1 3 1 2 6Product 2 2 1 1 4Product 3 2 2 2 6Product 4 4 3 1 8Every week, the firm has available to it a total of 480 hours of machining time, 400 hours of polishing time, and 400 hours of assembling time.The firm has a contract with a distributor to provide 50 units of Product 1, and 100 units of any combination of Products 2 and 3 every week.Through other customers, the firm can sell any number of units of Products 1, 2, and 3. However, no more than 25 units of Product 4 can be sold in a week.How many units of each product should the firm produce each week, so that it can meet its contractual obligations, and maximize its total profit?