Answer:
A and D takes much slower
Explanation:
Here, we want to select, out of the four given reactions, the one that is slower than the other two
The answers in these case are reactions 1 and 4 ( A and D)
The two reactions show what is called rust (as directly seen in reaction 4)
When we speak of rust, we simply mean a reaction that occurs over time
For example, non coated roofings of houses doesn’t get to change color at an instant
The color degradation that occurs is something that takes some time from the initial time they were used to roof the house
Hence, from these analogy, we can see that these reactions need an an external support to thrive or to come into existence
These external supports are natural forces and they contributing efforts occur over time and cannot be seen immediately
These reactions are thus ones that take much slower time than conventional laboratory reactions in the case of the formation of the precipitate or a reaction that requires a low flash point temperature such as that of black powder to produce such explosive effects
So in conclusion, what we are saying is that the two selected reactions are subjected to the availability of some conditions and may take time to manifest and these absolutely differentiates them from reactions that are spontaneous such as the one having an explosive effect or the other one leading to the formation of a precipitate which takes far less times
What is the percentage of water in the following compound? Answer using three significant figures.
Sodium carbonate decahydrate, Na2CO3 • 10H2O
% by mass H2O
Answer:
63.0
Explanation:
on edge
What is the relative placement of the Moon, Earth, and Sun during a lunar eclipse?
1.The Sun, Earth, and Moon are aligned with the Earth in the middle and the Moon furthest away from the Sun.
2.The Earth and Sun are aligned with the Moon at a right angle to Earth.
3The Moon and Sun are aligned with the Earth at right a right angle to the Moon.
4The Sun, Earth, and Moon are aligned with the Moon in the center and the Earth furthest away from the Sun.
Answer:
have a good day
Explanation:
1.The Sun, Earth, and Moon are aligned with the Earth in the middle and the Moon furthest away from the Sun.
Which is the molar mass of BF3?
Hello, can someone please help me with this science question I have? because my class starts in 5 mins and I didn't finish it and no one else is answering my last question. Thanks! BTW the subject is science.
Answer:
Yes they can
Explanation:
But they need pretestino fromadverse temperatures and they need nutrients and also oxygen around the roots
Use your knowledge of modern atomic theory and bonding to explain each of the following experimental observations. (Your explanations should be specific.) Refer to both substances when comparing. Within a family such as the alkaline earth metals, the ionic radius increases as the atomic number increases. The radius of the bromine atom is smaller than the radius of the bromide ion, Br-1. The first ionization energy of aluminum is lower than the first ionization energy of magnesium.
Answer:
(1) In the modern day periodic table the atomic size is increasing when we move down the group and it decreases when we move along the period from left to right. that's why Within a family such as the alkaline earth metals, the ionic radius increases as the atomic number increases. Alkaline earth metals have loosely held electrons which results in its increased size.
(2) The radius of the bromine atom is smaller than the radius of the bromide ion, Br-1 this happens because bromine is a non metal, and it also has a high electronegativity among other group elements as halogen group has high electronegativity. when the bromine acquires one extra electron and forms [tex]Br^-[/tex] ion, the configuration of bromine earlier was [tex]1s^22s^22p^63s^23p^64s^23d104p^5[/tex] but on addition of the electron the p shell will now have 6 electrons resulting in [tex]1s^22s^22p^63s^23p^64s^23d104p^6[/tex]the newly added electron repels the former neutral orientation and as a result of repulsion the size increases.
(3) The first ionization energy of Aluminum is lower than that of the first ionization energy of magnesium because magnesium has fully filled [tex]3s^2[/tex] orbital whereas Aluminum has one electron in the 3p orbitals, fully filled 3s orbitals has strongly held by the nucleus in case of Mg whereas 3p orbitals is shielded from the nucleus therefore it becomes easy to take out 3p electron that 3s electron.
When atoms form ions, they usually _______________ or _______________ enough electrons to achieve the electron ____________________ of a noble gas. Metal atoms ______________ electrons while nonmetal atoms _____________ electrons. The electron dot symbols for
Answer:
when atoms form ions ,they Usually loss or gain enough electrons to achieve the electron Configuration of a noble gas .
Metal atoms loss electrons while non Metal atoms gain electrons .
When atoms form ions, they usually loose or gain enough electrons to achieve the electronic configuration of a noble gas. Metal atoms loose electrons while nonmetal atoms gain electrons.
What is electronic configuration?Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/29757010
#SPJ5
Which allotrope of phosphorus has less ignition temperature?
Answer:
kid poop i only did this for no reason
Explanation:
Which of the following is not a sign that chemical reaction has taken place?
a. temperature change
b. formation of a liquid
c. color change
d. formation of a gas
Answer:
a
Explanation:
uh process of elimination
Temperature change, phase change to liquid or gas are all physical changes not chemical reactions. A color change indicates a chemical reaction has taken place.
What is a chemical change?Chemical changes are taking place by the breaking or making of chemical bonds. It results in the formation of a new product which is having different properties than the initial substances.
Physical changes does not involve any change in chemical bond. Phase changes, change in size, shape, conductivity, solubility etc. are physical changes. A change in temperature phase conversion into gas or liquid are all physical changes.
A change in color indicates that a new product is formed there. For example reddish brown rust is iron oxide formed by the reaction of Fe with oxygen. Therefore, option c is correct.
Find more on chemical changes:
https://brainly.com/question/2591189
#SPJ6
3. What mass of water vapor condenses if 435 kJ of heat are released in the process? a a 10.79 b 982 g C 1.30 x 10 g d 1939
Mass of water vapor = 193 g
Further explanationGiven
435 kJ of heat are released
Required
mass of water vapor
Solution
The heat to change the phase can be formulated :
Q = mLf (melting/freezing)
Q = mLv (vaporization/condensation)
Lv for water = 2256 kJ/kg or 2256 J/g or 40.7 kJ/mol
So the mass of water vapor :
[tex]\tt m=\dfrac{Q}{Lv}\\\\m=\dfrac{435000~J}{2256~J/g}\\\\m=192.8\approx 193~g[/tex]
The measure of the speed of the moving or
vibrating particles is called the
Answer:
Temperature
Explanation:
It's called temperature.
This is because, in any substance an increase in temperature means that the particles on the average will move with greater speeds, or that they have greater kinetic energy while a decrease in temperature means that the particles on the average will move with lesser speeds, or that they have lesser kinetic energy.
balance the equation KCIO3 → KCl + O2
Answer:
3kcl+ 02
Explanation:
in this way we can balance the chemical equation
How many atoms are in a 0.50 g sample of helium
What is the relationship between Force and Velocity?
Affect/Effect
Cause/Blame
Claim/Reasoning
Cause/Effect
Answer:
Cause/ effect relationship.
Explanation:
because the force is the cause of energy that is present and velocity is the effect (speed) that is present.
is the lorax story relevant today society?
Answer:
well i would say yes because how the factory made the air bad and how they all were fighting just about a tree
Explanation:
Answer: LOL XD no because of CO/VID
Explanation: BRAINLIEST PLS LOL
A pure substance is one that_____
a. Has been filtered
b. is an element or compound
c. If found in nature
d. Has been cleaned
Answer:
gimme points
Explanation:
What is the mass shown?
(Sorry u cant really see!)
In 0.4 mole of H2S, how many atoms of H are there?
Answer:
8
Explain
H: Ignoring the coefficient, we know there's 5+3=8 atoms
Ahhh helpppp:))))))))))
Answer:
HKOB
Explanation:
hope it helps
How many moles of oxide are in 0.050 g of Iron(III) oxide?
Answer:
0.00031311017345051
2b. 12 grams of C8H18 react with oxygen to produce carbon dioxide and water. How many grams of CO2 are produced?
12.4
13.5
11.6
37.1
Other:
Answer:
37.1g are produced
Explanation:
The combustion of C₈H₁₈ is:
C₈H₁₈ + 25/2O₂ → 8CO₂ + 9H₂O
Where 1 mole of C₈H₁₈ produce 8 moles of CO₂
To find the mass of CO₂ that is produced we need to convert the mass of C₈H₁₈ with molar mass. Then, with the chemical equation, we can find the moles of CO₂ and its mass, as follows:
Moles C₈H₁₈ -Molar mass: 114.2g/mol-
12g C₈H₁₈ * (1mol / 114.2g) = 0.105 moles of C₈H₁₈
Moles CO₂:
As 1 mole of C₈H₁₈ produce 8 moles of CO₂, 0.105 moles of C₈H₁₈ produce:
0.105 moles of C₈H₁₈ * (8moles CO₂ / 1mole C₈H₁₈) = 0.84 moles of CO₂
Mass CO₂ -Molar mass: 44.01g/mol-:
0.84 moles of CO₂ * (44.01g / mol) = 37.0g of CO₂ ≈
37.1g are producedQuestion are you smart well if you are then ANSWER THIS
whats in the middle of April and march?
What do you have to do to make a nut eating animal to like you?
AND why are you reading this?
Answer:
to get more points and to i have no clue what that answer is
Answer:
R is in the middle of March and April, feed it nuts right?? I'm reading this because I needed points to do my math homework.
Explanation:
If a 50kg car is pulling a 30kg car, how much force would be required to accelerate the cars at 2m/s/s?
Answer:
160N
Explanation:
The force required to accelerate the two cars can be calculated thus:
F = m × a
Where;
F = force (Newton)
m = mass (kg)
a = acceleration (m/s²)
However, according to the question, a 50kg car is pulling a 30kg car, which means that the mass of the two cars is 50kg + 30kg = 80kg.
a = 2m/s²
F = ma
F = 80 × 2
F = 160N
20 POINTS PLEASE HURRY At the center, 6 unmarked red balls are interspersed with 4 blue balls marked with plus signs. A green cloud with 2 concentric white lines surrounds the center, with 2 small green balls marked with minus signs on the inner white line and 2 small green balls marked with minus signs on the outer white line.
How many neutrons does this atom have?
4
6
10
14
Answer:
6
Explanation:
because newtrons dont have a charge so the red ones in the middle count those and you get 6
Answer:
The answer is 6
Explanation:
At what rate does magma deep below Earth's surface cool? What size of crystal results from magma cooling deep below Earth's surface?
O A. Slowly, large crystals form
B Quickly, large crystals form
C. Slowly, small crystals form
D. Quickly, small crystals form
Answer:
i think it is A
Explanation:
i got this answer from a good friend
The magma deep below Earth's surface cool slowly.Large crystals form results from magma cooling deep below Earth's surface. Therefore, option A is correct.
What is magma ?Magma is the molten or semi-molten natural material that gives rise to all igneous rocks. Magma can be found beneath the Earth's surface, and evidence of magmatism has been discovered on other terrestrial planets and natural satellites.
When magma slowly cools deep within the crust, the resulting rock is known as intrusive or plutonic. Because of the slow cooling, crystals can grow large, giving intrusive igneous rock a coarse-grained or phaneritic texture. Individual crystals in phaneritic texture can be seen with the eye.
Intrusive igneous rocks form when magma slowly cools and solidifies beneath the Earth's surface. Large, well-formed crystals are found in intrusive igneous rocks such as granite, gabbro, diorite, and dunite.
Thus, option A is correct.
To learn more about the magma, follow the link;
https://brainly.com/question/16940653
#SPJ6
What group is not assigned electron affinities on the periodic table?
Answer:
Explanation:
halogen group
Electron affinities are negative numbers because energy is released. The elements of the halogen group (Group 17) gain electrons most readily, as can be seen from their large negative electron affinitie
Answer:
tbh i liked how u ghosted me
Explanation:
which of the following compressed air?
a)car tyres be)Aerosol cans c)Air guns d)all of these
Answer:
option A.car tyres be
Explanation:
Name and draw the lewis dot diagram for CuO
Answer:
lewis dot diagram for cuo is a bulletin dot above cu
Explanation:
Molecular Formula : CuO
name : Copper Oxide or cupric oxide
GIVING BRAINLIEST!
Please define the following in your own words:
law of conservation of matter
Answer:
Matter says that the amount of matter stays the same, even when matter changes form. Sometimes it may seem that matter disappears during a science experiment, but this law tells us that matter cannot magically appear or disappear, it simply changes from one form to another.
Explanation:
brainliest?
Answer: Hope this helps:)
The Law of Conservation of Mass dates from Antoine Lavoisier's 1789 discovery that mass is neither created nor destroyed in chemical reactions. In other words, the mass of any one element at the beginning of a reaction will equal the mass of that element at the end of the reaction. The law of conservation of matter states that in any given system that is closed to the transfer of matter, the amount of matter in the system stays constant. The law of conservation of matter says that in chemical reactions, the total mass of the products must equal the total mass of the reactants. French chemist A. Lavoisier laid the foundation to the scientific investigation of matter by describing that substances react by following certain laws. These laws are called the laws of chemical combination. Matter says that the amount of matter stays the same, even when matter changes form. Sometimes it may seem that matter disappears during a science experiment, but this law tells us that matter cannot magically appear or disappear, it simply changes from one form to another. Matter can change form through physical and chemical changes, but through any of these changes, the matter is conserved. The same amount of matter exists before and after the change—none is created or destroyed. This concept is called the Law of Conservation of Mass.
What is the mass of 2.25 mol of the element Iron (Fe)?
Choose the correct set up from the given choices.
a. You would divided 2.25 mol by (55.84 mol divided by 1 gram)
b. You would multiply 2.25 mol by (1mol divided by 55.84 g)
c. You would multiply 2.25 mol by (55.84g divided by 1 mol)
d. You would divide 2.25 mol by (1 mol divided by 55.84g)
Mole measure the number of elementary entities of a given substance that are present in a given sample. To find mass of 2.25 mol of the element Iron (Fe), we multiply 2.25 mol by (55.84g divided by 1 mol). Therefore option c is correct option.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance.
Mathematically,
Mole of Fe element= mass of Fe element÷ Molar mass of Fe element
mass= Mole of Fe element ×Molar mass of Fe element
Substituting the given values in above formula we get
mass= 2.25 mol× 55.84 g/mole
mass= 2.25 mol× 55.84 g/mole
To find mass of 2.25 mol of the element Iron (Fe), we multiply 2.25 mol by (55.84g divided by 1 mol).
Therefore option c is correct option.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
serup is which solution
Answer:
dilute solution . . . . . . .
Explanation:
. .
Answer:
dilute soloution
Explanation:
dilute soloution as it dissolves