Please help me this is worth allot

Answer:

Answers below--

Explanation:

1. F/Force

2.H/Contact force

3.A/Non-contact force

4.C/electric force

5.D/gravity

6.I(i)/magnetic force

7.J/kilogram

8.G/newton

9.B/friction

10.E/lubricant

Answer:

470.4N

Explanation:

Given parameters:

Mass of the skydiver = 48kg

Unknown:

Force she exerts as she is falling to the ground  = ?

Solution:

The force she exerts while falling to the ground is her weight;

    Weight  = mass x acceleration due to gravity

Acceleration due to gravity  = 9.8m/s²  

  Weight  = 48 x 9.8  = 470.4N

Answer:

The new force is 2/3 of the original force

Explanation:

Coulomb's Law

The electrical force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between the two objects.

Written as a formula:

[tex]\displaystyle F=k\frac{q_1q_2}{d^2}[/tex]

Where:

[tex]k=9\cdot 10^9\ N.m^2/c^2[/tex]

q1, q2 = the objects' charge

d= The distance between the objects

Suppose the first charge is doubled (2q1) and the second charge is one-third of the original charge (q2/3). Now the force is:

[tex]\displaystyle F'=k\frac{2q_1*q_2/3}{d^2}[/tex]

Factoring out 2/3:

[tex]\displaystyle F'=\frac{2}{3}k\frac{q_1*q_2}{d^2}[/tex]

Substituting the original force:

[tex]F'=\frac{2}{3}F[/tex]

The new force is 2/3 of the original force

Answer:

Its obviously number D

Explanation:

When it comes to environmental benefit, Reducing emission of pollutants does the best job.

Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.

The elements, molecules, and particles that contribute to pollution are known as pollutants; life can be injured by exposure to these substances, and their impacts on people and plants are widely documented.

There are several ways that pollutants can enter the environment, both naturally and through human activity.

Depending on the type of pollution, what happens to it once it is released into the air, soil, or water supply.

Therefore, Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.

To learn more about pollutants, refer to the link:

https://brainly.com/question/28519286

#SPJ2

Answer:

Chemical energy is converted to thermal energy and electrical energy.

Explanation:

Answer:

Which identifies the energy transformations that take place in Anna’s body as this process takes place?

Mechanical energy is converted to kinetic energy, which is then converted to potential energy.

*******Chemical energy is converted to thermal energy and electrical energy. *******CORRECT*******

Electrical energy is converted to chemical energy and thermal energy.

Mechanical energy is converted to potential energy which is then converted to kinetic energy.

Explanation:

Feb 2021 Edge 100% test

Answer:

Vf = final velocity = 1.96 [m/s]

Explanation:

To solve this problem we must use the following equation of kinematics.

[tex]v_{f}^{2}=v_{o}^{2}-2*g*x[/tex]

where:

Vf = final velocity [m/s]

Vo = initial velocity = 9.98 [m/s]

g = gravity acceleration = 9.81 [m/s²]

x = vertical distance [m]

[tex]v_{f}^{2}=(9.98)^{2}-2*9.81*4.88\\v_{f}^{2} = 99.6-95.74\\v_{f}=\sqrt{3.8544}\\v_{f}=1.96[m/s][/tex]

Note: The negative sign of the gravity acceleration means that the gravity acceleration is pointing in the opposite direction of the movement.

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 2 × 9.8

We have the final answer as

Hope this helps you

Answer:

B. 7

Explanation:

Fluorine has 7 valence electrons in its orbitals.

The valence electrons are electrons in the outermost shell of an atom. Every element has a certain amount of valence electrons.

Answer:

7

Explanation:

Answer:

Answer:

Explanation:

When the mass

m

is being accelerated with an acceleration of

a

,we can say the net force acting in the direction of acceleration is

F

=

m

a

here,it is given that only one force

F

was applied to cause this acceleration, and also given,

m

=

2

K

g

,

a

=

2

m

s

−

2

So,

F

=

2

⋅

2

=

4

N

Answer:

4N

Explanation:

given formula solution

m=2kg F=ma F=2kg×2m/s^2

a=2m/s^2 =4N

Answer:

property of low melting point

Explanation:

When too much current flows through the low resistance element of the fuse, the element melts and breaks the circuit

Answer:

B

Explanation:

objects are conductors with unbalanced charges

Answer:

D & A

Explanation:

Answer:

B

Explanation:

Speed is distance divided by time.

Answer:

[tex]6.18\:\mathrm{m/s}[/tex]

Explanation:

The momentum of an object is given by [tex]p=mv[/tex].

Plugging in values, we have:

[tex]218=35.2v,\\v=\frac{218}{35.2}=\fbox{$6.18\:\mathrm{m/s}$}[/tex].

Answer:

I think it's B, not quite sure tho.

Answer:

If the sun's mass were to double without pushing or pulling on the Earth, then the Earth's orbit will change to an ellipse which brings it out to our current radius but spends most of its time closer to the sun. The tides would probably get even stronger then, particularly when our orbit takes us closer to the sun.

Explanation:

Answer:

50 Mph.

Explanation:

According to the National Severe Storms Laboratory, winds can really begin to cause damage when they reach 50 mph. But here’s what happens before and after they reach that threshold, according to the Beaufort Wind Scale (showing estimated wind speeds): - at 19 to 24 mph, smaller trees begin to sway.

Answer:

[tex]V_{B/A}=2i+2k[/tex]

Explanation:

The relative velocity can be calculated by means of the difference between vector B minus vector A.

[tex]V_{A}=i+2j-3k\\V_{B}=3i+2j-k\\V_{B}-V_{A}=(3-1)i + (2-2)j+(-1-(-3))k\\V_{B/A}=2i+2k[/tex]

can you please show a picture

Answer: Only foam rubber is compressible material

Explanation:

The pillow is made up of foam rubber which can be compressed easily due to the soft compressible rubber with hands on application of pressure on the surface. The shape of pillow regain its original shape when the pressure is withdrawn from the pillow. If the same activity is performed on the piece of rectangular block of wood and plasticine. Then the rectangular block of wood cannot be compressed with hand as it is a solid body. Plasticine is a putty like material. It is a clay like material and it can be compressed with hand but when the pressure is withdrawn the plasticine does not regain its shape back.

Answer:

Answer: The angle between force and displacement should be θ = 90° for minimum work. The angle between force and displacement should be θ = 0° for maximum work.

Answer:

KITTEEENNSSSSS last one is what i got for critsmas KlikBot Hexagon Special Pack

Explanation:

Answer:

Electrical force is directly proportional to the product of the charges on the two objects.

Explanation:

The electric force between two charges is given by :

[tex]F=\dfrac{kq_1q_2}{d^2}[/tex]

Where

k is electrostatic constant

q₁ and q₂ are charges

d is the distance between charges

It can be very clear that the electric force is directly proportional to the product of charges and inversely proportional to the square of the distance between them.

Hence, the correct option is (a) "Electrical force is directly proportional to the product of the charges on the two objects".

Answer:

The torque necessary to bring the wheel to rest in 40 seconds is 10.4 N·m

Explanation:

The question is with regards to rotational motion

The rotary motion parameters are;

The mass of the wheel = 50 kg

The radius of the wheel = 0.4 m

The rate of rotation of the wheel = 480 rpm

The time in which the wheel is to be brought to rest = 40 s

The rotational rate of the wheel in rotation per second is given as follows;

480 r.p.m = 480 r.p.m × 1 minute/(60 seconds) = 8 revolution/second

1 revolution = 2·π radians

Therefore, we have the angular velocity, ω, given as follows;

ω = 2·π × 8 revolutions/second ≈ 50.3 rad/s

The angular acceleration, α, is given as follows;

[tex]\alpha = \dfrac{\Delta \omega}{\Delta t} = \dfrac{\omega _2 - \omega_1}{t_2 - t_1}[/tex]

Whereby the wheel is brought to rest from its initially constant rotational motion in 40 seconds, we have;

ω₁ ≈ 50.3 rad/s, ω₂ = 0 rad/s, and t₂ - t₁ = 40 seconds

Plugging in the values for the variables of the equation for the angular acceleration, "α", we get;

[tex]\alpha = \dfrac{0 - 50.3 \ rad/s}{40 \ s} \approx 1.3 \ rad/s^2[/tex]

The torque on the wheel, τ, is given as follows;

τ = m·r²·α

Where;

m = The mass of the object = 50 kg

r = The radius of the wheel = 0.4 m

α = The acceleration of the wheel ≈ 1.3 rad/s²

Therefore;

τ = 50 kg × (0.4 m)² × 1.3 rad/s² ≈ 10.4 N·m

The torque necessary to bring the wheel to rest in 40 seconds = τ ≈ 10.4 N·m.

Answer:

-10.048 N m

Explanation:

Answer: impulse and momentum

Explanation:

Impulse and momentum-  two quantities can be expressed using the same units. Hence, option (4) is correct.

In physics, the term "impulse" is used to characterize or measure the impact of force operating gradually to alter an object's motion. It is often stated in Newton-seconds or kilograms per second and is denoted by the symbol J.

Because a body with momentum cannot be halted, it must be forced to move in the opposite direction for a predetermined amount of time. The harder it is to stop, the more momentum there is. Consequently, more force must be applied and more time must be spent to stop the body.

Mathematically,

impulse = force· time

= mass × acceleration × time

= mass × ( change in velocity/time) × time

= mass ×  change in  velocity

=  change in momentum.

Hence, both Impulse and momentum have same unit.

Learn more about impulse here:

https://brainly.com/question/16980676

#SPJ2

Answer:

A

Explanation:

Answer:

VR = [tex]\frac{Radius of the wheel}{Radius of the axle}[/tex]

Explanation:

Velocity ratio (VR) of a machine is a term that compares the distance moved by effort put into the machine to the distance moved by the load.

A wheel and axle is a device for lifting of a load through a height. It is made up of two circular parts called wheel and axle. Its velocity ratio (VR) can be determined by:

VR = [tex]\frac{Radius of the wheel}{Radius of the axle}[/tex]

For a practical wheel and axle, the diameter of the wheel is greater than the diameter of the axle.

Answer:

4m

Explanation:

800/200