please help me...
1. oak
2. catrpiller
3. Blue jay

Answer:

Boyle's Law: When the pressure of a gas increases, the volume of the gas will decrease as long as the temperature and amount of gas are constant.

So basically pressure is inversely proportional to Volume, when one increases, the other decreases, vice versa.

Equation: [tex]P_{1} V_{1} = P_{2} V_{2}[/tex]

Charles Law: When the temperature of a gas increases, the volume of a gas will also increase if the pressure and amount of gas are constant.

So basically Temperature and volume are directly proportional.

Equation: [tex]\frac{V_{1}}{T_{1}} = \frac{V_{2} }{T_{2} }[/tex]

Gay Lussac's Law: When the temperature of a gas increases, the pressure of a gas also increases when volume and the amount of gas remain constant.

Basically, Temperature and Pressure are directly proportional.

Equation: [tex]\frac{P_{1}}{T_{1}} = \frac{P_{2} }{T_{2} }[/tex]

Avogadro's Law: The most intuitive gas law. When you increase the amount of gas, the volume will also increase.

Meaning the moles (amount of gas) is directly proportional to volume.

Equation: [tex]\frac{V_{1} }{n_{1} } = \frac{V_{2} }{n_{2} }[/tex] (n stands for moles)

There is a combined gas law and ideal gas law but those are just the gas laws mentioned above but combined together. These should be everything.

Answer:

Boyle Law is when pressure and volume have a reverse relationship when temperature is the same.Charles law is basically when volume and temperature have a relationship when the pressure is the same.Lussac Law is I think just when I pressure and temperature is directly tied together when the volume stays the same.I dont think there is any "avogadro law", there is only pressure volume and temperature.

Please give brainliest thanks :D

Answer:

Explanation : Reptiles are cold blooded animals, have scales on their body (instead of hair or fur) and are usually egg laying. (certain viper types and boas give birth to live young). So that is what makes animals reptiles.

Reptiles are cold-blooded creatures that often lay eggs and have scales on their bodies rather than hair or fur. (Some types of vipers and boas give birth to live young).

Due to these reasons animals are reptiles.

Thus, it can be concluded that animals such as snakes and tortoises are called reptilians.

To know more about reptiles, refer to the below link:

https://brainly.com/question/2284471

#SPJ2

Answer:

Like another name?

Aerobic cellular respiration is also called aerobic metabolism, cell respiration, and oxidative metabolism.

Explanation:

cyanoacrylate

When cyanoacrylate polymerizes, the cyanoacrylate sticks together on an atomic level, and it becomes solid. Super Glue solidifies in all the microscopic crevices of an object that it moved into when it was a liquid, and it can form chemical bonds with any anions in the object.

Sugars. The food we eat is then broken down into ATP.

Answer:

The SunI

Explanation:

B. At-200

In beta decay the atomic number increases by 1

Answer: 1. Dependent, Independent The dependent variable responds to the independent variable and goes on the Y-axis.

Explanation: The independent variable is controlled or manipulated by the experimenter. For example, someone's age might be an independent variable. Other factors (such as what they eat, how much they go to school, how much television they watch) aren't going to change a person's age.The dependent variable is what you are measuring. For example, a test score could be a dependent variable because it could change depending on several factors such as how much you studied, how much sleep you got the night before you took the test, or even how hungry you were when you took it.

How that helps. :)

The dependent variable responds to the independent variable and goes on the Y-axis. Therefore, option A is correct.

In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables are so-called because, during an experiment, their values are examined on the assumption or presumption that they are governed by the values of other variables.

the dependent variable on other measurable variables As a result of an experimental manipulation of the independent variable or variables, these variables should change.

What you track in the experiment and what is impacted by it are both considered dependent variables. The independent variable affects the dependent variable's behavior. Because it "depends" on the independent variable, it is known as a dependent variable.

Thus, option A is correct.

To learn more about the dependent variable, follow the link;

https://brainly.com/question/1479694

#SPJ2

Answer:

C

Explanation:

A system is often defined as a procedure (a way to outline steps). C makes the most sense here.

I belive that your answer would be False

hi uhm

Explanation:

it's dark and lighting

Answer:

Ball and stick model is 3D and has the atoms depicted as different Coloured balls Conected to each other by "sticks"

fischer projection has the atoms on the side coming out of the plane, the atoms at the ends going behind (going away from you)

bond line notation Is the most common it does not show the C or H bonds but instead carbons are represented by the bends

The three structures of glucose represent three different models, they are ball and stick model, Fischer projection and bond line notation, respectively.

Glucose is a type of simple sugar (carbohydrate) that does not further hydrolyze to give monosaccharides.

Therefore, the three glucose structures reflect three distinct models: the ball and stick model, the Fischer projection, and the bond line notation, respectively.

Learn more about Glucose here:

https://brainly.com/question/30548064

#SPJ5

The rate constant for the decomposition of ethanol on an alumina surface is 24.00 × 10²⁵ M.

The rate law is: rate = 24.00 × 10²⁵ M/s

The integrated rate law is: [C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

If the initial concentration of C₂H₅OH was 1.25 × 10²² M, the half-life is 2.60 × 10⁻⁵ s.

The time required for all the 1.25 × 10²² M C₂H₅OH to decompose is 5.21 × 10⁻⁵ s.

Let's consider the decomposition of ethanol on an alumina surface.

C₂H₅OH(g) ⇒ C₂H₄(g) + H₂O(g)

The plot of [A] vs time (t) resulted in a straight line, which indicates that the reaction follows zero-order kinetics.

The slope, 24.00 × 10²⁵ M/s, represents the rate constant, k.

It is a chemical reaction in which the rate of reaction is constant and independent of the concentration of the reacting substances

The rate law for zero-order kinetics is:

rate = 24.00 × 10²⁵ M/s

The integrated rate law for zero-order kinetics is:

[C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

Is the time for the amount of substance to decrease by half.

If the initial concentration of C₂H₅OH was 1.25 × 10²² M, we can calculate the half-life [t(1/2)] using the following formula.

t(1/2) = [C₂H₅OH]₀ / 2 × k

t(1/2) = (1.25 × 10²² M) / 2 × (24.00 × 10²⁵ M/s) = 2.60 × 10⁻⁵ s

We can calculate the time required for all the 1.25 × 10²² M C₂H₅OH to decompose using the integrated rate law.

[C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

0 M = 1.25 × 10²² M - 24.00 × 10²⁵ M/s × t

t = 5.21 × 10⁻⁵ s

The rate constant for the decomposition of ethanol on an alumina surface is 24.00 × 10²⁵ M.

The rate law is: rate = 24.00 × 10²⁵ M/s

The integrated rate law is: [C₂H₅OH]t = [C₂H₅OH]₀ - 24.00 × 10²⁵ M/s × t

If the initial concentration of C₂H₅OH was 1.25 × 10²² M, the half-life is 2.60 × 10⁻⁵ s.

The time required for all the 1.25 × 10²² M C₂H₅OH to decompose is 5.21 × 10⁻⁵ s.

Learn more about zero-order kinetics here: https://brainly.com/question/13314785

Answer:

plastics, Styrofoam, paper, rubber, glass and dry air.

Explanation:

Answer:

c

Explanation:

steel is a good conductor therefore,a steel necklace is your answer

mark my brainliest if i make sense enjoy the rest of your day!

Answer:

No. While gold would not react with a silver nitrate solution, nickel would.

Explanation:

Refer to the metal reactivity series.

Reactivity: [tex]\text{Gold} < \text{Silver} < \text{Nickel}[/tex].

Gold is positioned after silver in the reactivity series, meaning that gold is typically less reactive than silver. Thus, gold would not react with a solution of silver ions to produce silver metal.

However, since nickel is positioned before silver in the reactivity series, it is expected that nickel would react with silver ions in this solution to produce silver metal.

Thus, if the silver nitrate solution comes into contact with the two rings, the nickel ring would likely react with the solution, the gold ring would not.

Answer:B

Explanation:

Answer:

A. Draw a conclusion

Explanation:

correct me if I'm wrong :>

Answer:

I think B) electronegativity is the correct answer.

Electronegativity is the property which is  used to determine the degree of polarity between two bonded atoms. Therefore, the correct option is option B.

Polarity is the dispersion of electrical charge over the atoms linked by a chemical bond. Bonds between identical atoms, such as H2, are electrically homogeneous in the sense that both hydrogen atoms are electrically neutral, but bonds between different atoms are electrically inequivalent.

Electronegativity is the property which is  used to determine the degree of polarity between two bonded atoms. The relative electronegativities of the elements determine the polarity of a bond. Electronegativity is the ability of an element's atom to attract electrons to itself when it is part of a compound.

Therefore, the correct option is option B.

To know more about polarity, here:

https://brainly.com/question/3248676

#SPJ2

Answer:: We're asked to find the molar concentration of the NaCl solution given some titration data.

Explanation:

Answer:

Molecules don’t have to collide with each other in order to experience intermolecular forces.

Molecules with permanent dipoles, held in fixed orientation, such as water molecules in the solid state (ice), interact with a potential proportional to the inverse cube of distance. This intermolecular force always exists, no matter how far apart the molecules are; every water molecule interacts with every other water molecule. However, because it diminishes rapidly with distance, it tends to only be important at short distances. (In contrast, the potential between two ions goes as 1/r, and that between an ion and a dipole goes as 1/r^2.)

The van der Waals forces, of which London dispersion forces are the most important, are described by a potential proportional to the inverse sixth power of distance. Theoretically, those forces are always operating between any two atoms or molecules, but again, only become important at short distances.

Explanation:

hope this helps

Answer:

Black powder has 3 main ingredients: Sulfur ([tex]S[/tex]), charcoal ([tex]C_{7}H_{4}O[/tex]), and potassium nitrate ([tex]KNO_{3}[/tex]).

Charcoal is basically just burnt wood and potassium nitrate can easily be displaced.

Keep in mind that this is BLACK POWDER and not actual gunpowder. The difference between the both is significant since gunpowder has a lot more refining processes it has to go through to be actually used in firearms and such.

The percentage composition of black powder should be 75% Potassium Nitrate, 10% Sulfur, and 15% charcoal.

Should be noted that black powder is not a safe compound to deal with, as static friction could ignite it.

There are other alternatives to Black powder such as nitroglycerin (used in dynamites) which is way more powerful and useful in doing mines and exploration but is an extremely tricky and reactive substance to work with.

I do hope this is just for educational purposes because you need to be certified to even just experiment with this (and there are laws to synthesize such as well, which I won't take any responsibility for)

Answer:

sulfur, charcoal and potassium nitrate

Explanation:

Payback

To prepare 500 mL of a 2.75 molar solution of NaCl, measure 80.44 g of NaCl, place it in a 500 mL volumetric flask and fill it with water to the mark.

We'll begin by calculating the number of mole of NaCl in the solution

Mole = Molarity x Volume

Mole of NaCl = 2.75 × 0.5

Mole of NaCl = 1.375 mole

Next, we shall determine the mass of 1.375 mole of NaCl.

Mass = mole × molar mass

Mass of NaCl = 1.375 × 58.5

Mass of NaCl = 80.44 g

Therefore, to prepare 500 mL of a 2.75 molar solution of NaCl, measure 80.44 g of NaCl, place it in a 500 mL volumetric flask and fill it with water to the mark.

Learn more about molarity: https://brainly.com/question/6685468

Answer:

C = 30

Explanation:

C = (86 - 32)/1.8

C = (54)/1.8

C = 30

Answer: 50 M

Explanation:

Mass

Formula used

Answer:

try this

Explanation:

I searched it but I don't know

B. silver tarnishing

The number of moles of silver, Ag, that are in 7.54 × 10²³ atoms of silver is 1.25 moles

From the question,

We are to determine the number of moles of silver, Ag, that are present in 7.54 × 10²³ atoms of silver

From the formula

[tex]Number\ of\ moles =\frac{Number\ of\ atoms}{Avogadro's\ constant}[/tex]

Avogadro's  constant = 6.022 × 10²³  atoms mol⁻¹

and

From the given information

Number of silver atoms = 7.54 × 10²³ atoms

Putting the parameters into the formula, we get

Number of moles of silver present = [tex]\frac{7.54\times 10^{23} }{6.022\times 10^{23}}[/tex]

Number of moles of silver present = 1.2520757 moles

Number of moles of silver present ≅ 1.25 moles

Hence, the number of moles of silver, Ag, that are in 7.54 × 10²³ atoms of silver is 1.25 moles

Learn more on calculating number of moles here: https://brainly.com/question/15839520

dolphin and whales use echolocation

Answer:

due to warm temperature

Explanation:

Explanation:

There is water present in liquid form instead of liquid nitrogen on the outer side of the can because of the temperature present in the surrounding environment. The temperature around the can is little warm which is favourable for the water but not for the liquid nitrogen. The liquid nitrogen present in liquid state when the temperature of the surrounding is too cold. if it is warm, the liquid nitrogen starts boiling and converts into gaseous state so that's why the warmer temperature is responsible for the presence of water not the liquid nitrogen.

Answer:

Cis-2-pentene or Z-2-pentene