PLEASE HELPPP MEEE :((​

Answer:

Explanation:

The length of the string determines the frequency of the sound waves. Shorter length strings will cause the string to vibrate faster which causes faster frequency and a higher pitch. Longer length strings have the opposite effect, in which frequency is slowed down causing lower pitch. This higher pitch creates a perceived brightness of the sound which can be categorized as being a better sound quality than that of a lower-pitched message. Therefore, we can say that yes, it does affect the sound produced.

Answer: D. Quantitative, Independent

Explanation:

Based on the information given in the question, the response variable is quantitative while the sampling is independent.

Independent samples refers to the samples which are randomly selected in such a way that the observations aren't dependent on the values of the other observations.

Quantitative variables refers to the numerical variables which can be in form of percents, counts, or numbers.

Since the city council randomly selects 1000 married couples from the city, then the answer is "Quantitative, Independent".

Answer:

the speed in -y

Explanation:

For this exercise we must use the right hand rule. The motion of a positive charge is given by.

Thumb points in the direction of speed

fingers extended in the direction of the magnetic field, + z axis

the palm in the direction of the force, as the charge is negative in the opposite direction of the force, axis + x

therefore the thumb is in the direction - y

the speed in -y

Answer:

Temperature is a measure of the average kinetic energy of the particles in an object. So, the answer will be B.

[tex]\huge \mathscr\colorbox{yellow}{AnSwEr}[/tex]

[tex] \huge\bold{T}[/tex]he speed of sound is maximum in solids. The speed of sound depends on the density of the medium through which it travels.The higher the density of the medium, the faster the propagation of sound. Since the density of solids is greater than that of liquids and gases, sound travels faster in solids. Also, the molecules in the solid medium are closer together than in liquids or gases, which allows sound waves to travel faster through it.

[tex] \huge \fbox \red{Hope This Helps You ❤}[/tex]

Answer:

Convex lens

Explanation:

hope this helps

Answer:

convex lens

Explanation:

A converging lens is also called a convex lens because it makes parallel light rays passing through it Bend Inward and meet at a spot just beyond the lens known as the focal point.

Answer:

efficiency of a machine is less than 100% because some part is energy is utilized to overcome some opposing forces like friction which is wasted as heat ,sound energy etc

Explanation:

[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]

In geometry, the area can be defined as the space occupied by a flat shape or the surface of an object. The area of a figure is the number of unit squares that cover the surface of a closed figure.

The resulting wave has the largest possible amplitude when Wave-1 and Wave-2 are exactly in step ... their peaks both happen at the same time and their troughs both happen at the same time.

This means that Wave-1 and Wave-2 have the same frequency, and the phase shift from one wave to the other is zero.

When all of that happens, the amplitude of the resulting wave is the sum of the amplitudes of Wave-1 and Wave-2.  If Wave-1 and Wave-2 have the same amplitude, then the resulting wave will have double that amplitude.

Answer:

Distancia = 42.5 metros

Explanation:

Dados los siguientes datos;

Velocidad del sonido = 340 m/s

Tiempo = 8 segundos

Para encontrar la distancia desde la que se escuchó el sonido;

Distancia = velocidad/tiempo

Sustituyendo en la fórmula, tenemos;

Distancia = 340/8

Distancia = 42.5 metros

Answer:

p = 6.64 cm

Explanation:

For this exercise we use the equation of the constructor

          [tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]

where f is the focal length, p and q are the distance to the object and the image, respectively

They tell us the focal length f = 2.2 cm and that the image as far as it can go is q = 3.29 cm, let's find the position of the object that creates this image

          [tex]\frac{1}{p} = \frac{1}{f} - \frac{1}{q}[/tex]

          1 / p = 1 / 2.2 - 1/3.29

           1 / p = 0.15059

           p = 6.64 cm

therefore the farthest distance from the object is 6.64 c

Answer: The mutual inductance of these solenoids is [tex]2.88 \times 10^{-7} H[/tex].

Explanation:

Given: Length = 50.0 cm (1 cm = 0.01 m) = 0.50 m

[tex]N_{1}[/tex] = 6750

[tex]N_{2}[/tex] = 15

Radius = [tex]\frac{0.120 cm}{2} = 0.6 cm = 6 \times 10^{-4} m[/tex]

As inner of a solenoid resembles the shape of a circle. So, its area is calculated as follows.

[tex]Area = \pi \times r^{2} = \pi \times (6 \times 10^{-4})^{2}[/tex]

Formula used to calculate mutual conductance of two solenoids is as follows.

[tex]M = \frac{\mu_{o} \times A \times N_{1} \times N_{2}}{l}[/tex]

where,

M = mutual conductance

A = area

[tex]\mu_{o}[/tex] = relative permeability = [tex]4 \pi \times 10^{-7} Tm/A[/tex]

[tex]N_{1}[/tex] = no. of coils in outer solenoid

[tex]N_{2}[/tex] = no. of coils in inner solenoid

l = length

Substitute the values into above formula as follows.

[tex]M = \frac{\mu_{o} \times A \times N_{1} \times N_{2}}{l}\\= \frac{4 \pi \times 10^{-7} Tm/A \times \pi (6 \times 10^{-4})^{2} \times 6750 \times 15}{0.5 m}\\= 2.88 \times 10^{-7} H[/tex]

Thus, we can conclude that the mutual inductance of these solenoids is [tex]2.88 \times 10^{-7} H[/tex].

Answer:

68.6 J

Explanation:

Applying,

P.E = mgh............... Equation 1

Where P.E = Potential Energy of the basket, m = mass of the basket, g = acceleration due to gravity of the basket, h = height of the basket

From the question,

Given: m = 3.5 kg, h = 2.00 m

Constant: g = 9.8 m/s²

Substitute these values into equation 1

P.E = 3.5×2×9.8

P.E = 68.6 J

Hence the potential energy of the basket is 68.6 J

Answer:

R = 28.125 ohms

Explanation:

Given that,

The voltage of a bulb, V = 4.5 V

Current, I = 0.16 A

We need to find the resistance of the filament. Using Ohm's law,

V = IR

Where

R is the resistance of the filament

So,

[tex]R=\dfrac{V}{I}\\\\R=\dfrac{4.5}{0.16}\\\\R=28.125\ \Omega[/tex]

So, the resistance of the filament is equal to 28.125 ohms.

Answer:

.....where's the model-

Work is done when you lift an object to a certain height. If the force exerted is greater than the weight of the object, input work is greater than the output work. Then the extra energy goes in overcoming the gravitational acceleration and heating up of body etc

Answer:

Wavelength = [tex]\lambda_p = 3.986 * 10^{-6}[/tex] m

Explanation:

As we know

Fringe width (w) = [tex]\frac{D*\lambda}{d}[/tex]

where

[tex]\lambda[/tex] is the wavelength

D is distance between source and screen

d is the distance between two slits

[tex]\frac{D}{d} = \frac{y}{\lambda}[/tex]

[tex]\frac{D}{d} = \frac{y_r}{\lambda_r} = \frac{y_p}{\lambda_p}\\\frac{y_r}{\lambda_r} = \frac{y_p}{\lambda_p}\\\lambda_p = \frac{y_p* \lambda_r}{y_r} \\\lambda_p =\frac{6.30 * 10^{-3} * 632.8 * 10^{-9}}{6 *10^{-3}} \\\lambda_p = 3.986 * 10^{-6}[/tex]m

Answer:

Power = 24.41Watts

Explanation:

Find the diagram attached

Power output  = Force * distance/Time

Given

Force = 120lb

Distance = 9inches

Time = 5sec

Since

1lb = 4.4482216153 N

120lb  = 120 * 4.4482216153

120lb = 533.787N

9in to meters

9in = 0.0254*9

9in = 0.2286N

Power = 533.787*0.2286/5

Power = 24.41Watts

Answer:

Less

Explanation:

Weight is a force measurement. The object's mass is 5kg not its weight. To find its weight you have to take the mass of an object and multiply it by the acceleration of gravity. The acceleration of gravity is greater on earth than on the moon so therefore the object will weigh less on the moon.

Answer:

2

Explanation:

Answer:

Mater's Mass is the Answer

Answer:

Explanation:

The one above is incorrect, and I know this is late. Even if it doesn't help you I hope it helps people in the future! YES I AM TALKING ABOUT YOU FUTURE PEOPLE!! I know this is the answer because I have taken 5.11 Quiz: Uncrewed Spacecraft in K12. There will only be the questions and correct answers below.

1. Which planetary body was Spirit designed to explore?

Mars.

2. What is the name of the most distant manmade object in space? (Credit: shathaadnan64/lak521)

Voyager 1.

3. Which group was designed to study Saturn? (Credit: Brainly User/snowballandtigoya1xa

Voyager 1, Huygens, and Cassini.

4. Why are scientists interested in exploring Mars?

Possible evidence of life.

5. What do interplanetary space missions study?

Planets in the solar system.

Have an amazing day!!

Answer:

B

Explanation:

i took the test

Answer:

100 A.

Explanation:

From the question given above, the following data were obtained:

Electrochemical equivalent (Z) = 0.0012 g/C

Mass (M) = 36 g

Time (t) = 5 mins

Current (I) =?

Next, we shall determine the charge. This can be obtained as follow:

Electrochemical equivalence (Z) = 0.0012 g/C

Mass (M) = 36 g

Charge (Q) =.?

M = ZQ

36 = 0.0012 × Q

Divide both side by 0.0012

Q = 36 / 0.0012

Q = 30000 C

Next, we shall convert 5 mins to s. This can be obtained as follow:

1 min = 60 s

Therefore,

5 mins = 5 × 60

5 mins = 300 s

Finally, we shall determine the current. This can be obtained as shown below:

Charge (Q) = 30000 C

Time (t) = 300 s

Current (I) =?

Q = It

30000 = I × 300

Divide both side by 300

I = 30000 / 300

I = 100 A

Therefore, the current is 100 A.

Answer:

We should not try to park the car because its rest length is greater than the space available.

The car seems to be approximately equal to the friend (L = 3.16 m). Due to this reason he is sure to park.

Explanation:

We should not try to park the car because its rest length is greater than the space available.

The friend is sure about parking because the car appears short in length to him. For this, we will solve Einstein's length contraction formula from theory of relativity:

[tex]L = L_o\sqrt{1-\frac{v^2}{c^2}}[/tex]

where,

L = Relative length observed by friend = ?

L₀ = rest length = 6 m

v = relative speed = 85% of speed of light = 0.85c

Therefore,

[tex]L = (6\ m)\sqrt{1-\frac{(0.85c)^2}{c^2}}[/tex]

L = 3.16 m

Hence, the car seems to be approximately equal to the friend. Due to this reason he is sure to park.

Answer:

dino :)

Explanation:

Answer:

The rotation rate is 15.3 rad/s.

Explanation:

maximum voltage, V = 120 V

Magnetic field, B = 1.5 T

length, L = 10.2 cm

width, W = 12.8 cm

Number of loops, N = 400

Let the rate of rotation is w.

The maximum voltage is given by

V = N B A w

120 = 400 x 1.5 x 0.102 x 0.128 x w

w = 15.3 rad/s

Answer:

4210 W

Explanation:

We'll begin by calculating the energy required in lifting the water from the depth. This can be obtained as follow:

Mass (m) = 1200 Kg

Height (h) = 10 m

Acceleration due to gravity (g) = 9.8 m/s²

Energy (E₁) =?

E₁ = mgh

E₁ = 1200 × 9.8 × 10

E₁ = 117600 J

Next, we shall determine the energy required to project the water at 15 m/s. This can be obtained as follow:

Mass (m) = 1200 Kg

Velocity (v) = 15 m/s

Energy (E₂) =?

E₂ = ½mv²

E₂ = ½ × 1200 × 15²

E₂ = 600 × 225

E₂ = 135000 J

Finally, we shall determine the power of the motor. This can be obtained as follow:

Total energy (E) = E₁ + E₂

= 117600 + 135000

= 252600 J

Time (t) = 1 min = 60 s

Power (P) =?

P = E/t

P = 252600 / 60

P = 4210 W

Therefore, the power of the motor is 4210 W.