Answer:
This is because we are surrounded by positive ions from electromagnetic fields generated by computers, cell phones, and other electronic devices which can impair brain function and suppress the immune system causing symptoms such as: anxiety, breathing difficulty, fatigue, headaches, irritability, lack of energy, poor concentration, nausea, and vertigo,
Explanation:
Answer:
Ions can be harmful because ions can produce dangerous indoor ozone and can waste space and electricity. Hours of negative ion exposure can produce symptoms of depression. On the other hand, ions can help improve our immune systems by strengthening our immune cells. Ions can also speed up the production of antibiotics.
A sumo wrestler is 330 pounds. How much force does the earth exert in him? Define Mass Define Weight
Answer:
a large matters of body with no shape is mass
Which is an example of an object at rest?
a. a jet flying overhead
b. a chair on a floor
c. a rabbit jumping
d. a ball hit by a bat
Answer:
b. a chair on a floor
Explanation:
All of the other objects are in motion, the jet is flying so it is not at rest, the rabbit is also moving, and a ball hit by a bat is also in motion
Which segment of this graph shows a decreasing velocity?
A. A to B
B. B to C
C. C to D
D. D to E
E. E to F
Answer:
E to F
Explanation:
The velocity decreases during segment E to F since the slope of the curve decreases with time.
Position-time graph:We have 5 segments in the given graph between position and time. Analyzing each segment we can conclude the following:
Segment A to B: the position remains constant as time increases, this means that the velocity is zero.
Segment B to C: the rate of increase in the position slowly becomes greater as time passes, which means velocity is increasing and the object is accelerating
Segment C to D: The rate of increase in the position is constant with respect to the rate of increase in time, the slope of the curve is constant, which means that the velocity is constant.
Segment D to E: same as the segment A to B, the velocity is zero.
Segment E to F: The rate of increase in the position slowly decreases with time, and the slope of the curve decreases with time, which means the velocity is decreasing.
Learn more about position-time graph:
https://brainly.com/question/13693087?referrer=searchResults
Which illustration represents the arrangement of particles in a gas?
The particles in the gas are farther apart from each other, therefore illustration (C) represents the arrangement of particles in a gas.
What are the states of matter?Matter exists in different forms in nature in which three common states are solid, liquid, and gaseous. Some substances have a definite shape and some can flow, and take the shape of their container like water, some forms of matter do not have certain shapes or sizes.
The particles in solids are highly closely packed so illustration (D) represents the particles in a solid state. The compact packing of solids means that the particles are very close to each other and do not show movement.
In liquids, the particles are some distance away from each other and they show some movements. The particles in a liquid have some kinetic energy.
In gases, the particles are farther from each other and thus their particles show large movement. The kinetic energy of particles in gases is the greatest in comparison to that of solids and liquids.
Learn more about states of matter, here:
brainly.com/question/13233345
#SPJ5
Witch one goes to witch
gas giants and ice giants
asteroids and terrestrial planets
comets and ice giants
meteoroids and asteroids
Bodies composed primarily of frozen gases
Planets composed of lighter elements compounds
bodies composed primarily of metal and rock
Rocky and metallic bodies smaller than planets
hope it helps!
A solid weight 277.5g in air and 212.5g when totally immersed in the liquid of density 0.9 g/cm³.Calculate the density of solid.
help me Asap!!
Explanation:
Here is the answer,
Lets be BF
The density of solid is 3.842 g/cm³.
What is Density ?
Density is the measurement of how tightly a material is packed together. It is defined as the mass per unit volume.
Density Symbol: D or ρ Density Formula: ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.
Weight in air = 277.5Weight in water = 212.5Displaced Weight = 277.5 - 212.5
= 65 gm
Density = 0.9 g/cm³
Mass = 65 gm
Volume = Mass / Density
= 65 / 0.9
= 72.22 cm³
Now,
Density of Solid = 277.5 / 72.22
= 3.842 g/cm³.
Hence , The density of solid is 3.842 g/cm³.
Learn more about Density here ;
https://brainly.com/question/15164682
#SPJ2
A 10 kg bowling ball and a 1 kg softball are both dropped from rest from the same height at the same time. The force of gravity on the bowling ball
Answer:
98N
Explanation:
Given parameters:
Mass of the bowling ball = 10kg
Mass of the softball = 1kg
Unknown:
Force of gravity on the bowling ball = ?
Solution:
The force of gravity on an object is the same as the weight of the body;
Weight = m x g
m is the mass
g is the acceleration due to gravity = 9.8m/s²
Weight of bowling ball = 10kg x 9.8m/s² = 98N
At the first Democratic Party convention of 1860, fifty Southern delegates refused to vote and left the convention. voted to secede from the Union. nominated their own candidate. decided to become Republicans.
Answer:
A) refused to vote and left the convention.
Explanation:
At the first Democratic Party convention of 1860, fifty Southern delegates refused to vote and left the convention
Answer:
The answer is A
Explanation:
got it right edge 2021
A box of mass m is pushed at an angle 0 by a force Fp along a frictionless surface. The box travels to right with acceleration a. What is the mass of the box?
Answer:
m = FpCos0 / a
Explanation:
it just is
A box of mass m is pulled at an angle θ by a force Fp along a frictionless surface. The box travels to the right with acceleration a
What is the mass m of the box?
Answer: m = FpCos0/a
Match each term to its definition.
Which sentence best explains the difference between potential energy and
kinetic energy?
A. Potential energy is related to an object's position, and kinetic
energy is related to its motion.
B. Potential energy is related to an object's motion, and kinetic
energy is related to its position.
C. Potential energy is related to an object's position, and kinetic
energy is related to the arrangement of its particles.
O D. Potential energy is related to an object's shape, and kinetic energy
is related to its position.
Answer:
C. Potential energy is related to an object's position, and kinetic
Explanation:
The energy contained in the small motions of the object's molecules can be broken up into a combination of microscopic kinetic energy and potential energy.
Answer:
c. potential energy is related to an object's position, and kinetic energy is related to its motion
Explanation:
The radio waves that travel through the air to our car/truck/home radios are just another type of light. Let's say that your favorite radio station is 87.9 on the FM dial. That means that those radio waves have a frequency of 87.9 MHz. (a) What are the wavelength and energy of those radio waves? (b) How fast would these radio waves travel through water?
Answer:
Explanation:
(a) Electromagnetic waves travels at the speed of light = 3.0 x [tex]10^{8}[/tex] m/s.
v = fλ
where v is the velocity of the wave, f is the frequency, and λ wavelength.
So that;
λ = [tex]\frac{v}{f}[/tex]
= [tex]\frac{3.0*10^{8} }{87.9*10^{6} }[/tex]
= 3.413 m
ii. Enegy of the wave can be determined by;
E = hf
where h is the Planck's constant and f the frequency of the wave.
E = 6.626 x [tex]10^{-34}[/tex] x 87.9 x [tex]10^{6}[/tex]
= 5.82 x [tex]10^{-26}[/tex] J
(b) Refractive index of water = [tex]\frac{velocity of light in air}{velocity of light in water}[/tex]
velocity of light in water = 1.33 x 3.0 x [tex]10^{8}[/tex]
= 3.99 x [tex]10^{8}[/tex] m/s
A man pushes a box along a flat, frictionless surface using a force of 500 N. The box was moved a distance of 2.5 m. The actual work done by the worker was _____
Answer:
Workdone = 1250Nm
Explanation:
Given the following data;
Force, F = 500N
Distance, d = 2.5m
Workdone is given by the formula;
[tex] Workdone = force * distance[/tex]
Substituting into the equation, we have
[tex] Workdone = 500 * 2.5 [/tex]
Workdone = 1250Nm
Therefore, the actual work done by the worker is 1250 Newton-meter.
The actual work done by the worker is 1250 J.
Work can be defined as the product of force and distance. The s.i unit of work is Joules
The formula of work is
W = Fd....................... Equation 1
Where W = work done by the worker, F = Force, d = distance.
From the question,
Given: F = 500 N, d = 2.5 m
Substitute these values into equation 1
W = 500×2.5
W = 1250 J
Hence, the actual work done by the worker is 1250 J
Learn more about work here: https://brainly.com/question/19129
Red: Distance = 3 x Time
Blue: Distance = 2 x Time
A student is asked to predict the time it would take for the blue marble to travel 4 meters. What is the time?
Problem 1
You push your square space cow, mass 5 kg, with a force of 10 N. what will be the acceleration of your space cow?
Answer:
2 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{10}{5} \\ [/tex]
We have the final answer as
2 m/s²Hope this helps you
wavelength of the wave if its frequency is 12.0 hertz and its speed is 1.2 meters per second?
Answer:
0.1m
Explanation:
Given parameters:
Frequency = 12hz
Speed = 1.2m/s
Unknown:
Wavelength of the wave = ?
Solution:
The wavelength of the wave can be derived using the expression below;
V = f∧
V is the speed of the wave
f is the frequency of the wave
∧ is the wavelength
So;
∧ = [tex]\frac{Velocity}{frequency}[/tex]
Now, insert the parameters and solve;
∧ = [tex]\frac{1.2}{12}[/tex] = 0.1m
. Reem took a wire of length 10 cm. Her friend Nain took a wire of 5 cm of the same material and thickness both of them connected with wires as shown in the circuit given in figure. The current flowing in both the circuits is the same. (a) Will the heat produced in both the cases be equal? Explain.
Given :
Reem took a wire of length 10 cm. Her friend Nain took a wire of 5 cm of the same material and thickness both of them connected with wires as shown in the circuit given in figure. The current flowing in both the circuits is the same.
To Find :
Will the heat produced in both the cases be equal.
Solution :
Heat released is given by :
H = i²Rt
Here, R is resistance and is given by :
[tex]R = \dfrac{\rho L}{A}[/tex]
So,
[tex]H = i^2\times \dfrac{\rho L}{A} t\\\\H = \dfrac{i^2\rho Lt}{A}[/tex]
Now, in the question every thing is constant except for the length of the wire and from above equation heat is directly proportional to the length of the wire.
So, heat produced by Reem's wire is more than Nain one.
Hence, this is the required solution.
A driver travels 225 miles in 4 hours and 30 minutes. What was his average speed in mph?
Answer:
195 is it current pls tell
When the velocity of a liquid flowing steadily in a tube increases what happens to the pressure
Bernoulli's Principle states that as the speed of a moving fluid increases, the pressure within the fluid decreases. The Bernoulli's Principle explains the behavior of an ideal fluid passing through a pipe or enclosed passageway such a pump.
Earth's ________ is the pattern of slow changes in rocks from one kind to another.
a
rock cycle
b
rock
c
mineral
d
weat
Answer:
A. Rock cycle
Explanation:
Because it really is the change of a rock from another, like ingenuous, sedimentary rock..
Energy Calculation 4. What is the gravitational potential energy of an object that has a mass of 100kg it is 10m off of the ground? The gravity on Earth is measured at 9.8N/kg
What occurs when the moon blocks the view of the sun
Neap tide
Spring tide
Solar eclipse
Lunar eclipse
Answer:
solar eclipse
Explanation:
because at that time, the moon completely covers the path and casts its shadow on earth because it is present between sun and earth's path. so, solar eclipse occurs.
hope it helps :)
Answer:solar eclipse
Explanation:
Top one is right <3
What is the best description of sound waves?
A. A source vibrates up and down, causing air molecules to move up and down perpendicular to the direction the wave is transmitted.
B. A source vibrates back and forth, causing air molecules to move back and forth in the same direction that the wave is transmitted.
C. A source vibrates up and down and back and forth, causing air molecules to move in a circular motion as the wave is transmitted.
D. A source ejects a ring of high-velocity air molecules that travel from the source to a listener.
Answer:
If im right the answer should be D
Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires. Given youngs modulus of steel = 2×10 ^−11 Pa and that of brass is 0.9×10 ^−11
Pa.
Explanation:
hope this will help u
Answer:
I'll take this one also
Un automóvil deportivo se mueve a rapidez constante viaja 110m en 5.0s si entonces frena y llega a detenerse en 4.0s ¿Cuál es su aceleración en m/s²?
Answer:
La aceleración del automovil antes de deternerse es -5.5 m/s².
Explanation:
Podemos encontar la aceleración del auto usando la siguiente ecuación:
[tex] v_{f} = v_{0} + at [/tex]
En donde:
[tex]v_{f}[/tex]: es la velocidad final = 0 (se detiene)
[tex]v_{f}[/tex]: es la velocidad inicial
a: es la aceleración=?
t: es el tiempo = 4.0 s
Primero debemos encontrar la velocidad inicial, para ellos usaremos la siguiente ecuación de moviemiento rectilíneo uniforme:
[tex] v_{0} = \frac{x}{t} = \frac{110 m}{5.0 s} = 22 m/s [/tex]
Ahora, la aceleración es:
[tex] a = \frac{v_{f} - v_{0}}{t} = \frac{0 - 22 m/s}{4.0 s} = -5.5 m/s^{2} [/tex]
El signo negativo se debe a que el auto está desacelerando.
Entonces, la aceleración del automovil antes de deternerse es -5.5 m/s².
Espero que te sea de utilidad!
A student is cooking macaroni and cheese for dinner. The student places a pot on the stove, boils water in the pot, places noodles in the boiling water, and watches the noodles float and sink in the pot. Explain the types of heat transfer that are occurring as the student cooks the noodles.
Answer:
Conduction.
Convection.
Radiation.
Question 7 of 20 A permanent magnet is placed in a coil of wire. If there is no electric current in the wire, which statement must be true? A. The magnet is moving relative to the wire. B. The magnet is not moving relative to the wire. C. The magnet is longer than the coil of wire. D. The magnet is shorter than the coil of wire.
Answer:
the magnet is not moving relative to the wire so B
Explanation:
The magnet is not moving relative to the wire if, A permanent magnet is placed in a coil of wire, If there is no electric current in the wire so, option B is correct.
What is current?Electric current is a term used to describe how much electricity flows across a circuit and how it flows in an electronic circuit. Amperes are used to measure it (A). The more electricity flowing across the circuit, the higher the ampere value.
When current flows through a coil of wire, it transforms into an electromagnet. The coil spins as a result of the electromagnet's interaction with a permanent magnet.
An electromagnet is created when current passes through a coil of wire. Because of the electromagnet's interaction with a permanent magnet, the coil spins.
Thus, The magnet is not moving relative to the wire.
To know more about current:
https://brainly.com/question/4289257
#SPJ2
Sa ma ajute cineva va rog mult Ce cantitate de apă poate fi încălzită de la temperatura t 1 = 10 0 C la temperatura finală T 2 = 293, 15 K, dacă i se furnizează căldura de 41850 J ? Se dă căldura specifică a apei : c apă = 4185
Răspuns:
1000 kg
Explicaţie:
Date date
t1 = 10 ° C
t2 = 293,15K = până la grad = 293,15-273 = 20,15 ° C
= 20 ° C aproximativ
Q = 418kJ = 418000J
c = 4180J / kg ° C
m =? Kg
Necesar:
Masa m în kg
Pasul doi:
Formulă:
Q = c * m * Δt
Q = c * m * (t2 -t1)
m = Q / c * (t2-t1)
Calculati:
m = 418000/4180 * (20-10)
m = 100 * 10 kg
m = 1000 kg
The shape of a mineral has to do with
A.
its smell.
B.
its color.
C.
the way its crystals are formed.
D.
how easy it is to scratch.
Answer:
C is the correct answer
Are three coefficients of expansion alpha bita and gamma universal constant?
Answer:
As the temperature increases, the volume of the material also increases. This is known as thermal expansion. It can also be explained as the fractional change in the length or volume per unit change in the temperature.
The relation between alpha, beta, and gamma is given in the form of a ratio and the ratio is 1:2:3 and can be expressed as:
alpha=fracbeta2=fracgamma3
Following is the relation between the three:
L = L (1 + α.ΔT)
Where, α is the coefficient of linear expansion
A = A (1 + β.ΔT)
Where, β is the coefficient of aerial expansion
V = V (1 + γ.ΔT)
Where, γ is the coefficient of cubical expansion
V = V + γV.ΔT
V = V (1 + γ.ΔT)
L3 = L3 (1 + α.ΔT)3
L3 = L3 (1 + 3α.ΔT + 3α2.ΔT2 + α3.ΔT3)
L3 = L3 (1 + 3α.ΔT)
Alpha, beta, and gamma are related to one another in the form of a ratio, and that ratio is 1:2:3, and yes they are universal constants.
What is expansion?A substance's volume expands while its mass stays constant. Heating is typically the cause of expansion. When a substance is heated, the molecular bonds separating its particles weaken, the particles move more quickly, and the substance expands as a result.
Determine the relation as shown below,
L = L (1 + α × Δ T)
here, α is the coefficient of linear expansion
A = A (1 + β × Δ T)
here, β is the coefficient of aerial expansion
V = V (1 + γ × Δ T)
here, γ is the coefficient of cubical expansion
V = V + γ × V × Δ T
V = V (1 + γ × ΔT)
L3 = L3 (1 + α × Δ T)3
L3 = L3 (1 + 3α × ΔT + 3α2 × ΔT2 + α3 × ΔT3)
L3 = L3 (1 + 3α × Δ T)
To know more about expansion:
https://brainly.com/question/28942019
#SPJ2