Q2 Alice wants to find the pressure she exerts upon the floor. She measures the length and width of her shoe and multiplies them together to get a rough area. She then doubles the answer. She divides her weight in newtons by the total area she has worked out. a) Why won't her area measurement be very accurate?​

Answers

Answer 1

Answer:

The area estimate is somewhat inaccurate because the length * width of the shoe will be an inaccurate measurement of the area of the shoe that actually contacts the floor.


Related Questions

Which of the following is NOT an example of evidence that can be used to support the theory of evolution?
A. DNA evidence
B. Embryonic structures
C. Anatomical structures
D. Similar appearances in modern day organisms

Answers

D. Similar appearance in modern day organism to is the right naswer

The student notices that the electronic balance has a zero error, so it shows
mass readings that are all slightly too small.
This means that the density value is
A)incorrect and slightly too large
B)incorrect and slightly too small
C)correct because the student used three significant figures
D)correct because the mass of the block is more than zero

Answers

The student notices that the electronic balance has a zero error, so it shows mass readings that are all slightly too small. This means that the density value is incorrect and slightly too small. The correct option is B.

What is density?

The density is the ratio of the mass and the volume of the object. It is denoted by ρ.

ρ = mass/Volume = m/V

The student notices that the electronic balance has a zero error, so it shows mass readings that are all slightly too small.

As mass is directly proportional to density. The density will also be slight small when mass reading are all slightly small.

Thus, the correct option is B.

Learn more about density.

https://brainly.com/question/9215083

#SPJ1

Which form of energy is converted to electrical energy in a voltaic cell?.

Answers

Answer:

chemical energy is converted to electrical energy in a voltaic cell.

Why is the same side of the Moon always visible from Earth?


A.) The Moon does not rotate about its axis.


B.) The Moon does not revolve around Earth.


C.) The Moon takes the same time to rotate about its axis as it takes to orbit Earth.


D.) The Moon and the Earth take the same time to rotate about their respective axes.

Answers

Answer:

Explanation:

Answer

The true fact is that C is what happens in outer space.  Both rotations take 27.3 days.  

A: The exact opposite is true. It does rotate about it's axis.

B: Again this is just plain false. Given the way we observe it, the moon must be rotating around the earth.

D. they don't. 27.3 hours and 24 hours are not the same.

(
the average power transferred to the solar panels by sunlight is 26 000 w
calculate the average energy transferred to the solar panels in 30 seconde
use the equations
energy transferred = power time

Answers

Answer:

P = E / t       definition of power is energy / unit time

1 W = 1 Joule / sec      definition of 1 Watt of power

E = 2.6E4 J/s * 30 s = 7.8E5 Joules = 780,000 Joules

The average power transferred to the solar panels by sunlight is 26 000 w. The average energy transferred to the solar panels in 30 seconds is 780,000 joules.

To calculate the average energy transferred to the solar panels in 30 seconds, we can use the equation:

Energy transferred = Power × Time

Given that the average power transferred to the solar panels is 26,000 watts and the time is 30 seconds, we can substitute these values into the equation:

Energy transferred = Power × Time

Energy transferred = 26,000 × 30

Energy transferred = 780,000 watt-seconds

Since the watt-second is equivalent to the joule (J), the energy transferred to the solar panels is 780,000 joules.

Therefore, the average energy transferred to the solar panels in 30 seconds is 780,000 joules.

To know more about energy and power:

https://brainly.com/question/34423421

#SPJ5

A 950-kg car strikes a huge spring at a speed of 22m/s (fig. 11-54), compressing the spring 5.0m. (a) what is the spring stiffness constant of the spring? (b) how long is the car in contact with the spring before it bounces off in the opposite direction?

Answers

(a) The spring stiffness constant of the spring is 18,392 N/m.

(b) The time the car was in contact with the spring before it bounces off in the opposite direction is 0.23 s.

Kinetic energy of the car

The kinetic energy of the car is calculated as follows;

K.E = ¹/₂mv²

K.E = ¹/₂ x 950 x 22²

K.E = 229,900 J

Stiffness constant of the spring

The stiffness constant of the spring is calculated as follows;

K.E =  U = ¹/₂kx²

k = 2U/x²

k = (2 x 229,900)/(5)²

k = 18,392 N/m

Force exerted on the spring

F = kx

F = 18,392 x 5

F = 91,960 N

Time of impact

F = mv/t

t = mv/F

t = (950 x 22)/(91960)

t = 0.23 s

Learn more about spring constant here: https://brainly.com/question/1968517

#SPJ4

A bat strikes a 0.145 kg baseball with force of 5800 N. What acceleration does the baseball experience?

Answers

Answer:

40,000 m/s²

Explanation:

The formula is given as Force = mass × acceleration, so then acceleration = Force / mass.

Therefore...

5800 N ÷ 0.145 kg = 40,000 m/s²

5.4.2 Test (CST): Earth's Resources
Question 5 of 15
▬▬
The human population grows by about 2 percent each year, showing
growth.
OA. exponential
OB. linear
OC. cubic

Answers

The human population which grows by about 2 percent each year, is showing linear growth.

What is linear increment?

A linear increment occurs when a sequence increases gradually with a constant value.

If a population increases at the rate of 2%, the incremental rate or constant factor is 2%, thus, we can conclude that the human population which grows by about 2 percent each year, is showing linear growth.

Learn more about linear increment here: https://brainly.com/question/2511791

#SPJ1

4. A weightlifter lifts a set of weights a vertical distance of 2 meters. If a constant net force of 350 N is exerted on the weights, what is the net work done on the weights?

Answers

Answer:

700 J

Explanation:

Work = Force * Distance

Work = 350 N * 2 M = 700 J

Determine the frequency of the radar wave. [Show all calculations, including the equation and substitution with units.]

Answers

The frequency of the radar wave is 4.166 Hz.

What is wavelength?

The wavelength is the distance between the adjacent crest or trough of the sinusoidal wave. The wavelength is the reciprocal of the frequency of the wave.

Wavelength λ = 1/f

A 0.12-meter-long electromagnetic (radar) wave is emitted by a weather station and reflected from a near by thunderstorm.

The radar wave travels double the distance 0.12 m.

λ = 2 x 0.12  = 0.24 m

Then, the frequency of the radar wave is

f= 1 / 0.24

f =4.166 Hz

Thus, the frequency of the radar wave is 4.166 Hz.

Learn more about wavelength.

https://brainly.com/question/13533093

#SPJ1

How does newton’s third law of motion relate to a catapult?

PLEASE ANSWER ASAP. WILL GIVE BRAINLIEST

Answers

Answer: the force when the catapult swings has the same force as it does when coming down

Explanation:

for every reaction there is an equal opposite reaction

Yes ok it is ok an if it’s ok than you are ok and if I’m ok than your ok

A race car sits at the starting line on a racetrack. When the race starts, the car's tires exert a force on the track. According to Newton's third law of motion, WHAT PREVENTS THE RACE CAR FROM SINKING INTO THE TRACK?
A. The force of friction between the car tires and the track prevents the car from moving.
B. The track surface exerts a force that is larger and in the same direction as the force exerted by the tires.
C. A normal force that is equal in magnitude and opposite in direction to gravity pushes on the car.
D. The track exerts a force that is equal and in the opposite direction as the force exerted by the tires.

Answers

To prevent the race car from sinking into the track,  the track exerts a force that is equal and in the opposite direction as the force exerted by the tires.

What is Newton's third law of motion?

Newton's third law of motion states that force every action there is equal and opposite reaction.

That is the force exerted on an object is equal in magnitude to the reaction of the object.

Fa = - Fb

According to this law, Fa is equal to Fb in magnitude but the directions are different.

Thus, to prevent the race car from sinking into the track,  the track exerts a force that is equal and in the opposite direction as the force exerted by the tires.

Learn more about Newton's third law of motion here: https://brainly.com/question/62770

#SPJ1

HELP!
how did Mario Molina contribute to science?

i need like a mini paragraph:(

Answers

Mario Molina helped to bring about the 1987 Montreal Protocol on substances that result in depletion of the Ozone Layer.

What is ozone layer?

The topmost layer of the atmosphere which protect the harmful UV rays from the Sun to reach the Earth surface.

Mario Molina has the great contribution in science field. He tried hard and succeeded in passing an international agreement to eliminate CFCs also called as Chloro Fluoro Carbons and other ozone-depleting chemicals.

These CFCs were used in jet planes which depleted the ozone layer and a hole was observed over Antarctica.

Learn more about ozone layer.

https://brainly.com/question/14330630

#SPJ1

a carmboard 4ft x 4ft Square has the queen at the centre the queen is hit by the striker moves to the front edge, rebounds and goes inta hole behind the striking line. find the magnitude of displacement of queen a) from the centre to front edge b) from the front end edge to hole (c) from centre to hole.​

Answers

Diagonal of cardboard=displacement to hole

√4²+4²4√2

So displacement till edge

4√2/22√2

Total distance

4√2+2√26√2ft

From centre to hole displacement

2√2

You suspect that the power supply in your desktop pc is failing. you want to use a multimeter to test the power supply. which multimeter setting should you use

Answers

The multimeter setting should you use is between 11-12 volts. If the voltage is too high or too low, the power supply must be changed.

What is a multimeter?

An instrument made to measure resistance, voltage, and electric current, often across a range of values.

You think your desktop computer's power supply is malfunctioning. To test the power supply, you should use a multimeter.

Between 11 and 12 volts should be seen on the multimeter. The power supply is failing and has to be replaced if it's too high or too low.

Hence, the multimeter setting should you use is between 11-12 volts.

To learn more about the multimeter refer:

https://brainly.com/question/5135212

#SPJ1

A massless rod is attached to the ceiling by a string. Two weights are hung from the rod: a 0.4-lb weight at its left end and a 1.2-lb weight at its right end. The length of the rod is L and a string is attached (3L/4 from its left end) so that the rod (with attached weights) is horizontal. What is the tension in the string supporting the rod and the attached weights

Answers

The tension in the string supporting the rod and the attached weights is 7.11 N.

Tension in the string supporting the rod

The tension in the string supporting the rod and the attached weights is the sum of the weights supported by the strings.

T = (m1 + m2)g

where;

m1 and m2 are the two masses supported

0.4lb + 1.2lb = 1.6lb = 0.725 kg

T = 0.725 x 9.8

T = 7.11 N

Learn more about tension here: https://brainly.com/question/918617

#SPJ1

Some iron has a coefficient of linear expansion of 12 x 10-6 / o K . A 100 mm length of iron piping is heated through 20 K. The pipe extends by:

Answers

Given that the linear expansion of the pipe is 12×10¯⁶ K¯¹, the pipe extends by 0.024 mm

Data obtained from the question Original length (L₁) = 100 mmChange in temperature (ΔT) = 20 KCoefficient of expansion (α) = 12×10¯⁶ K¯¹Change in length (ΔL) =?

How to determine the new diameter

α = ΔL / L₁ΔT

12×10¯⁶ = ΔL / (100 × 20)

12×10¯⁶ = ΔL / 2000

Cross multiply

ΔL = 12×10¯⁶ × 2000

ΔL = 0.024 mm

Learn more about linear expansion:

https://brainly.com/question/23207743

#SPJ1

Which of the following energies is related to temperature change

Answers

Thermal energy is a type of energy that is related to temperature change. Details about thermal energy can be found below.

What is thermal energy?

Thermal energy refers to the internal energy of a system in thermodynamic equilibrium due to its temperature.

Thermal energy of a body is determined by the difference in temperature in the surrounding environment and the body.

Therefore, thermal energy is a type of energy that is related to temperature change.

Learn more about thermal energy at: https://brainly.com/question/11278589

#SPJ1

Photovoltaic cells: a) have become more economical to produce and use over the past 25 years. b) are the most efficient means of converting solar energy to electricity. c) are currently only used in urban areas of highly developed countries. d) have only been adapted for use in small appliances.

Answers

Photovoltaic cells are the most efficient means of converting solar energy to electricity. Option b is correct.

What is a cell?

A cell is a voltage and current-producing device that consists of a single anode and cathode separated by an electrolyte.

One or more cells can make up a battery. One cell, for example, is one AA battery.

Light intensity on a solar cell is often measured in "suns," with one sun roughly equivalent to 1 kW/m².

Concentrated sunlight improves the ratio of current generated while the device is lighted vs when it is dark, hence enhancing output voltage and efficiency.

Photovoltaic cells are the most efficient means of converting solar energy to electricity.

Hence, option b is correct.

To learn more about the cell refer to:

https://brainly.com/question/3142913

#SPJ1

Planetary Nebula/White Dwarf Stars - Little Ghost Nebula. Some red giant stars develop into planetary nebulas as their cores continue to contract, to increase in temperature, and to burn and vent the remaining gases into interstellar space. Eventually, the core collapses to the point where it is hot enough to ionize the vented gases, forming a relatively short-lived (~10,000-20,000 years) planetary nebula. The remaining core collapses into a white dwarf star. The vented materials from the planetary nebula play an important role in enriching the universe in elements with atomic weights less than 26 (forming the basis for carbon-based life like ourselves!). Which type of star will form a planetary nebula

Answers

Smaller stars, like our sun, die by ejecting their outer layers of gas into space, resulting in the formation of a planetary nebula.

How planetary nebula formed?

A planetary nebula is formed when a red giant ejects its outer atmosphere. A white dwarf is the carbon core of a star that has lost its photosphere.

This results in a one-of-a-kind and breathtaking creation known as a planetary nebula.

Smaller stars, like our sun, die by ejecting their outer layers of gas into space over a 10,000-year period, leaving behind the star's heated core.

Radiation from the white dwarf causes the gas to shine, resulting in a one-of-a-kind and stunning creation known as a planetary nebula.

The carbon core of a red giant that has evacuated its photosphere as a planetary nebula is a white dwarf.

Hence, Smaller stars, like our sun, die by ejecting their outer layers of gas into space type of star will form a planetary nebula

To learn more about the planetary nebula refer to:

https://brainly.com/question/1162533

#SPJ1

Which property of sound waves decreases as the square of the distance from the source increases? A. Pitch
B. Intensity C. Wavelength D. Speed ​

Answers

Intensity is the property of sound waves that decreases as the square of the distance from the source increases. Option B is correct.

What is a sound wave?

A sound wave is produced when a medium begins to vibrate. When an entity vibrates, a pressure wave is formed, which causes sound.

As the square of the distance from the source increases, the intensity of sound waves decreases.

Sound intensity relationship

[tex]\rm {I} = \frac{1}{r^2}[/tex]

[tex]\rm \frac{I_2}{I_1} =\frac{r_1^2}{r_1^2}[/tex]

Hence, option B is correct.

To learn more about the sound wave, refer to

https://brainly.com/question/11797560.

#SPJ1

Which would result in a judge who is sitting beside the testing ground observing the tennis ball having a speed of 7 m/s?

Answers

Considering the frames of reference, the robot has to fire backwards at a speed of 2m/s.

What is relative velocity?

The relative velocity is obtained based on the inertial frame of reference. The term velocity is always measured relatively.

Given that the inertial frame of reference is relative to the moving frame then; 7m/s - 9 m/s = -2m/s.

It then follows that the robot has to fire backwards at a speed of 2m/s.

Missing parts:

Basim’s robotics team builds a robot that travels at 9 m/s and can fire a tennis ball at a target.

Which would result in a judge who is sitting beside the testing ground observing the tennis ball having a speed of 7 m/s?

The robot fires the ball forward with a speed of 7 m/s.

The robot fires the ball backward with a speed of 7 m/s.

The robot fires the ball backward with a speed of 2 m/s.

The robot fires the ball forward with a speed of 2 m/s.

Learn more about frame of reference:https://brainly.com/question/12222532?

#SPJ1

Answer:

C. the robot fires the ball backward with a speed of 2 m/s.

Where are heavier elements, like iron or gold made?
*
1 point
In space, between the stars
in the black holes at the centers of galaxies
In the hearts of stars
They were made as part of the big bang

Answers

Answer:

In the hearts of stars:

Theory tells us the elements heavier than iron are created by novas

that is when a star explodes, and any heavier elements were once created when a star exploded.

If you had to choose a theory that best represents your own view of development, would you choose a single theory or would you select components of several different theories? what aspect of your chosen theory (or theories) make it more attractive than others

Answers

I would select components of several different theories and the aspect which will be more attractive will be the one which has similarities and accurate.

What is a Theory?

This is defined as a proposed explanation for a particular phenomenon or occurrence.

Components of several different theories will bring different dimensions and factors to the occurrence which will help in its thorough analysis.

Read more about Theory here https://brainly.com/question/11555274

#SPJ1

Which statement belongs to daltons atomic theory

Answers

Atoms cannot be broken down into smaller pieces is the statement belongs to daltons atomic theory. Option B is correct.

What is an atom?

The atom consists of matter that may be split without releasing electrical charges. It's also the smallest unit of matter with chemical element features.

The complete question is:

"Which statements belong to Dalton's atomic theory? Select all that apply.

A)Atoms cannot be created or destroyed.

B)Atoms cannot be broken down into smaller pieces.

C)All atoms of an element are identical.

D)Chemical reactions cause atoms to be rearranged."

According to Dalton's atomic hypothesis, atoms cannot be broken down into smaller bits.

Hence, option B is correct.

To learn more about the atom refer to the link;

https://brainly.com/question/1566330

#SPJ1

Which option is an example of an object that has potential energy followed by an object that has kinetic energy?

Answers

A ball held over a person's head | a ball rolling on the floor is an example of an object that has potential energy followed by an object that has kinetic energy.

What is Kinetic energy?

This is the type of energy possessed by a body by virtue of its motion or movement.

The rolling ball therefore has kinetic energy while a ball being held over a person's head has potential energy which is the energy possessed by a body by virtue of its position.

Read more about Kinetic energy here https://brainly.com/question/8101588

#SPJ1

Sherry and Ellen are talking about the factors that affect light scattering in the atmosphere. Sherry says one factor is the length of the path of sunlight. Ellen says one factor is altitude. Who is correct

Answers

Sherry who says one factor is the length of the path of sunlight is correct.

Factors affecting light scattering

There are two main factors which affects light scattering, and they include the following;

the size of the particles wavelength of the light

length of the path of sunlight is equivalent to wavelength of the light.

Thus, we can conclude that Sherry who says one factor is the length of the path of sunlight is correct.

Learn more about light scattering here: https://brainly.com/question/1381101

#SPJ1


A satellite with a mass of 120 kg fires its rocket thrusters, which give an impulse of 7440 kg-m/s. What was the total change in the velocity of the satellite — that is, what was the total AV?

A. 17 m/s
B. 88 m/s
C. 45 m/s
D. 62 m/s

Answers

From the calculation and the momentum of the body, the velocity is 62 m/s

What is momentum?

The term momentum refers to the product of mass and velocity. Now recall that the rate of change of momentum is equal to the impressed force.

Hence;

7440 kg-m/s = 120 kg * v

v= 7440 kg-m/s/120 kg

v =  62 m/s

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

A 1050 w electric toaster operates on a household circuit of 120 v. what is the resistance of the wire that makes up the heating element of the toaster

Answers

The Resistance of the wire that makes up the heating element of the toaster is 13.75Ω.

What is Resistance?

Resistance is the measure of the opposition to current flow in an electrical circuit.

S.I. Unit of resistance is ohms, symbolized by the Greek letter omega (Ω)

Also from Ohm's Law,[tex]R=\frac{V}{I}[/tex]

From power-current relation

P=VI

Also, [tex]I=\frac{P}{V}[/tex]

[tex]I = \frac{1050}{120}[/tex]

I = 8.75 A

From Ohm's Law,[tex]R=\frac{V}{I}[/tex]

[tex]R = \frac{120}{8.75}[/tex]

R = 13.75 Ω

The Resistance of the wire is 13.75 Ω

For more resistance questions visit

https://brainly.com/question/14547003

#SPJ1

when two bodies of diffrent temprature in contact, heat will ​

Answers

Answer:

When two bodies at different temperatures are placed in thermal contact with each other, heat flows from the body at a higher temperature until they both reach the same temperature.

Explanation:

Other Questions
What is the volume of a gas if 0.182 moles of the gas is at 1.99 atm and 83.4oC? Please show the work Who was the most recent president without a college degree?. PLEASE HELP NEEDS TO BE DONE IN 10 MINUTES!!! why is earth called a dyamic state how to write an essay that ends with a scene River drove for 2 hours on the freeway, then decreased their speed by 20 miles per hour and drove for 2 more hours on a country road. If their total trip was 168 miles, then what was their speed on the freeway? In which condition does barium chloride conduct electricity? And why 7/3 x (2/3 - 2/9) =I need help with this and I've looked for websites for help, no luck. Please help PART A: What does the phrase "Great Names" mean as used in paragraph 4?A. famous people celebrated by historyB. last names that signify noble ancestryC. current day political leadersD. proper nounsPART B: Which TWO phrases from the text best support your answer to Part A?A. "on the other end of the spectrum, criminals and the destitute." (Paragraph 4)B. "We've never been privileged to keep company with monarchs and presidents in themodern world." (Paragraph 4)C. "The artifacts which make up our home are a working collection." (Paragraph 5)D. "As we use and interact with them, they become our teachers." (Paragraph 5)E. "A few are Edison designs because people inevitably expect to see the Great Names ofHistory represented." (Paragraph 8)F. "Really though, we prefer the hidden stories of the past" (Paragraph 8) uizActive12358Why did the US government think internment camps were necessary during World War II?O to protect against discriminationO to protect national securityO to improve relations with JapanO to improve relations with Germany What are the structures in the nucleus that contain dna?. Determine the value of Y. Solve the equation 3(2x + 2) = 3x - 15 A. X = -7 B. X = -17/3 C. X = 3 D. X = 7 Why was it important to surround Frances borders with powerful countries? PLEASE HELP!!!!! Use the claim and evidence to complete the activity.Claim: People have many voting options if they cant get to the polls on Election Day.Evidence: People can cast their ballot early or by mail.In 12 sentences, evaluate the relevance and sufficiency of the evidence in the argument above to determine if the claim is or is not convincing. please help! please do not copy and paste i have seen the other ones Given the function f(x) = 2(3)x, Section A is from x = 0 to x = 1 and Section B is from x = 2 to x = 3.Part A: Find the average rate of change of each section. Part B: How many times greater is the average rate of change of Section B than Section A? Explain why one rate of change is greater than the other. The functoin f has zeros at -3 and 4 witch graph could represent function f During her speech, yousafzai claims that the taliban is "afraid of women" (paragraph 17). what does she mean and why does she use this specific wording? A certain atom has 22 protons and 19 electrons. This atom loses an electron. The net charge on the atom is now 4+. If this same atom with 22 protons and 19 electrons were to gain 3 electrons, the net charge on the atom would be 8. A round tube weighs 30 kg. If the tube is stood on end, it pushes down on the floor with a pressure of 20 N/m. How many square inches is the end of the tube