Answer:
c ) 29.4 psi
Explanation:
If the density of earth was twice than its actual density which is 5.51 g/mL, then at sea level the atmospheric pressure of earth in British units would be equal to 29.4 psi because increase of gravity, increase occurs in the atmospheric pressure. If we double the gravity of earth by double of the earth density, so the weight of that same mass of air will be double which leads to the doubling of the atmospheric pressure at the sea level.
2Al(s) + 3Cu(NO3) 2(ag) -> 3Cu(s) + 2Al(NO3)з(aq) why is this a redox reaction
Explanation:
The given chemical equation represents a redox (reduction-oxidation) reaction. Redox reactions involve the transfer of electrons between species, resulting in changes in the oxidation states of the elements involved. Let's analyze the oxidation states of the elements in this equation:
On the reactant side:
- Aluminum (Al) has an oxidation state of 0 since it is in its elemental form.
- Copper (Cu) in the Cu(NO3)2 compound has an oxidation state of +2.
- Nitrogen (N) in the Cu(NO3)2 compound has an oxidation state of +5.
- Oxygen (O) in the Cu(NO3)2 compound has an oxidation state of -2.
On the product side:
- Copper (Cu) in the Cu(s) has an oxidation state of 0 since it is in its elemental form.
- Aluminum (Al) in the Al(NO3)3 compound has an oxidation state of +3.
- Nitrogen (N) in the Al(NO3)3 compound has an oxidation state of +5.
- Oxygen (O) in the Al(NO3)3 compound has an oxidation state of -2.
By comparing the oxidation states of the elements before and after the reaction, we can observe the following changes:
- Aluminum (Al) undergoes oxidation, as its oxidation state increases from 0 to +3.
- Copper (Cu) undergoes reduction, as its oxidation state decreases from +2 to 0.
Since there is a transfer of electrons from aluminum to copper, this reaction is classified as a redox reaction. Aluminum loses electrons (oxidation) and copper gains those electrons (reduction).
The V/Q ratio of a normal upright lunch is 0.8, this indicates that ventilation is _______________ than perfusion.
The V/Q (Ventilation/Perfusion) ratio of a normal upright lung is 0.8, which indicates that ventilation is less than perfusion.
The V/Q ratio is a measure of the ratio between the amount of ventilation (airflow) reaching the alveoli of the lungs and the amount of blood perfusion (blood flow) in the pulmonary capillaries. In a normal upright lung, the V/Q ratio is 0.8, which means that ventilation is less than perfusion.
Ventilation refers to the movement of air into and out of the alveoli, allowing for gas exchange. Perfusion, on the other hand, refers to the blood flow in the pulmonary capillaries, which carries deoxygenated blood to the lungs for oxygenation.
A V/Q ratio of 0.8 indicates that there is relatively less airflow (ventilation) compared to blood flow (perfusion) in the lung. This can occur in certain areas of the lung where blood flow is relatively high compared to the amount of air reaching those regions. Factors such as gravity and differences in regional blood flow can contribute to this imbalance in ventilation and perfusion.
Learn more about ventilation here:
https://brainly.com/question/31440202
#SPJ11
electrolytic dissociation of ethanoic acid pls
Which lists the structures, in correct order, through which light passes when it enters the eye?
cones, pupil, lens, sclera
sclera, iris, pupil, lens
vitreous humor, lens, pupil, cornea
cornea, pupil, lens, vitreous humor
hurry plz
Answer:
cornea, pupil, lens, vitreous humor
Answer:
cornea, pupil, lens, vitreous humor
Explanation:
Which of the following is the most likely reason the oxetane derivative of thymine disrupts DNA replication? a. The oxetane derivative is not recognized by DNA polymerase. b. The oxetane derivative can form hydrogen bonds with guanine. c. The oxetane derivative lacks the functional groups to form hydrogen bonds with adenine. d. The oxetane derivative resembles uridine.
Thymine (T) and its derivatives play important roles in DNA and RNA structure and function. Oxetane derivatives of thymine can inhibit DNA replication by disrupting the hydrogen bonding that stabilizes the DNA double helix.
Option C is the most likely reason that the oxetane derivative of thymine disrupts DNA replication: the derivative lacks the functional groups to form hydrogen bonds with adenine, which it would normally pair with to form a stable base pair.Thymine derivatives have a significant effect on the properties of DNA, as they can influence the structure and stability of the DNA double helix. Thymine derivatives can cause DNA replication to stall or disrupt, as they affect the ability of DNA polymerase to accurately copy the DNA sequence. This is because DNA polymerase relies on complementary base pairing to ensure accurate replication, and the presence of thymine derivatives can interfere with this process by disrupting the formation of stable base pairs. Overall, the oxetane derivative of thymine can disrupt DNA replication by preventing proper base pairing with adenine, leading to errors in the DNA sequence that can have harmful effects.
To know more about oxetane visit:
https://brainly.com/question/29642467
#SPJ11
Calculate ΔH°298 for the process Co3O4(s) ⟶ 3Co(s) + 2O2(g) from the following information:
Co(s) + 1/2O2(g) ⟶ CoO(s) ΔH°298 = −237.9kJ
3CoO(s) +1/2O2(g) ⟶ Co3O4(s) ΔH°298 = −177.5kJ
The ΔH° 298 for the process Co₃O₄ (s) ⟶ 3 Co (s) + 2 O₂(g) is -536.2 kJ.
What is the ΔH° of the reaction?To calculate ΔH° 298 for the process:
Co₃O₄ (s) ⟶ 3 Co (s) + 2 O₂(g)
First, we reverse the second reaction and change the sign of the enthalpy change:
Co₃O₄ (s) ⟶ 3 CoO (s) + 1/2 O₂ (g) :ΔH°298 = +177.5 kJ
Multiply the first reaction by 3 to match the number of CoO(s) in the second reaction:
3 Co(s) + 3/2 O₂ (g) ⟶ 3 CoO(s) ΔH°298 = 3 * (-237.9) kJ = -713.7 kJ
Sum the reactions and their enthalpy changes to obtain the desired reaction:
3 Co(s) + 3/2 O₂(g) + Co₃O₄(s) ⟶ 3 CoO(s) + 1/2 O₂(g) + Co₃O₄ (s) ΔH°298 = -713.7 kJ + 177.5 kJ
ΔH° 298 = -536.2 kJ
Learn more about ΔH° at: https://brainly.com/question/28263454
#SPJ4
how did the report on the topic of climate change help the general public relate to the topic?
Answer:
Report of the climate change can help the people. As when people wants to go for picnics or somewhere else. They did not have any idea that what will be the climate when they go. Report of climate change help him to choose the right time for going on picnics or somewhere else.
Answer:
The report mentioned ways that people’s lives may change because of climate change, such as rising sea levels, reduced crop efficiency, and heat waves. This information may encourage the public to change the way they use energy, for example how they heat their homes or power their cars.
Explanation:
title = q9a1 The angles in a perfect tetrahedron are 109.5°, and those for a trigonal plane are 120°. Based on its Lewis structure, what would you predict for the bond angles in ammonia, NH3?
The bond angle in ammonia, NH3 is approximately 107°, which is less than the tetrahedral bond angle of 109.5°.
The bond angles in ammonia, NH3 can be predicted based on its Lewis structure.The tetrahedral molecule has bond angles of 109.5°, and the trigonal plane molecule has bond angles of 120°.The shape of ammonia, NH3, molecule can be determined using its Lewis structure. Ammonia molecule has four electrons pairs and a single bond and thus has a tetrahedral electronic geometry. The three hydrogen atoms are situated at the corners of a triangle with nitrogen in the middle. The molecular shape, which determines the bond angles, is thus trigonal pyramidal.The bond angle in ammonia, NH3 is approximately 107°, which is less than the tetrahedral bond angle of 109.5°.
Learn more about bond angle here:
https://brainly.com/question/31324226
#SPJ11
The activity of a radioisotope is 3000 counts per minute at one time and 2736 counts per minute 48 hours later. What is the half-life of the radioisotope??
a) 831hr
b)521hr
c)361 hr
d)1.44hr
The half-life of the radioisotope is approximately 14.72 hours, which is closest to option d) 1.44 hr (1 hour and 26.4 minutes).
Radioisotopes are radioactive isotopes of elements that are used in a variety of applications, including medical imaging and cancer treatment. They are also used in geology and archaeology to determine the age of rocks and artifacts. The activity of a radioisotope is the rate at which it decays, measured in counts per minute (CPM). The half-life of a radioisotope is the amount of time it takes for half of the atoms to decay.
Given that the activity of a radioisotope is 3000 counts per minute at one time and 2736 counts per minute 48 hours later, we can use the formula A = A₀ (1/2)^(t/T) to find the half-life of the radioisotope.
Where A is the activity after time t, A₀ is the initial activity, T is the half-life, and t is the time elapsed.
Substituting the values given in the problem, we get:
2736 = 3000 (1/2)^(48/T)
Dividing both sides by 3000, we get:
0.912 = (1/2)^(48/T)
Taking the natural logarithm of both sides, we get:
ln 0.912 = ln (1/2)^(48/T)
Using the rule that ln (a^b) = b ln a, we get:
ln 0.912 = (48/T) ln (1/2)
Dividing both sides by ln (1/2), we get:
ln 0.912 / ln (1/2) = 48/T
Using a calculator to evaluate the left-hand side, we get:
3.26 = 48/T
Multiplying both sides by T, we get:
3.26T = 48
Dividing both sides by 3.26, we get:
T ≈ 14.72 hours
Therefore, the half-life of the radioisotope is approximately 14.72 hours, which is closest to option d) 1.44 hr (1 hour and 26.4 minutes).
To know more about radioisotope refer here: https://brainly.com/question/13143662#
#SPJ11
molecular mass meaning in chemistry?
Answer:
Molecular mass is a number equal to the sum of the atomic masses of the atoms in a molecule.
Explanation:
The molecular mass gives the mass of a molecule relative to that of the 12 C atom, which is taken to have a mass of 12. Hence why Molecular mass is a number equal to the sum of the atomic masses of the atoms in a molecule.
which type of chemical bond occurs when atoms share electrons, as shown in this diagram? choose one: a. covalent b. metallic c. ionic d. polarity
The chemical bond that occurs when atoms share electrons is called a covalent bond. A covalent bond is a chemical bond that occurs when two or more atoms share electrons. This can happen when two or more atoms come together to form a molecule.
In a covalent bond, the electrons that are shared between the atoms are held together by a strong force. This force is called a covalent bond. The strength of the covalent bond depends on how many electrons are being shared and how strong the attraction between the atoms is. A covalent bond can be polar or nonpolar. A polar covalent bond occurs when there is an uneven sharing of electrons between the atoms. In this type of bond, one atom will have a stronger pull on the electrons than the other. This results in a partial positive charge on one atom and a partial negative charge on the other.
A nonpolar covalent bond occurs when the electrons are shared equally between the atoms. This results in no partial charges on the atoms. Overall, covalent bonds are important in the formation of many important molecules in the body and in the environment. The length and strength of a covalent bond depend on several factors. For example, the number of electrons shared between the atoms and the distance between the atoms can affect the strength of the bond. Similarly, the type of atoms involved in the bond can affect its strength.
know more about covalent bond,
https://brainly.com/question/19382448
#SPJ11
The concentration of A before the reaction below occurs is 0.069 M. If the concentration of A at equilibrium is 0.0276 M, what is the equilibrium constant? 2A (g) 2B (g) + C (g)
The equilibrium constant (Kc) for the given reaction is approximately 0.475.
In the given reaction: 2A(g) → 2B(g) + C(g), the stoichiometric coefficients of the reactants and products provide insight into the equilibrium constant expression. The equilibrium constant (Kc) expression for this reaction is: Kc = ([B]²[C]) / ([A]²)
Given the initial concentration of A as 0.069 M and the equilibrium concentration of A as 0.0276 M, we can substitute these values into the equilibrium constant expression: Kc = ([B]²[C]) / ([A]²) = ([2 * 0.0276]²) / ([0.069]² = 0.475
Therefore, the equilibrium constant (Kc) for the given reaction is approximately 0.475.
To know more about equilibrium constant, refer here:
https://brainly.com/question/30620209#
#SPJ11
state one advantage of drinking hard water rather than drinking soft water
Answer: Have a great day!
Explanation: Unlike hard water, soft water is free of harsh minerals that can damage your home and your body. In other words, it is more gentle on your body and your home. Without calcium and magnesium, soft water can prevent scale buildup around your home including your appliances and pipes.
What is a buffer used for?
A. To limit the pH change in a solution
B. To prevent an acid from dissociating
C. To neutralize the pH of a solution
D. To prevent a salt from dissolving
A buffer is primarily used to limit the pH change in a solution. Option A is correct.
A buffer is the solution which contains the weak acid and its conjugate base or weak base and its conjugate acid. It is designed to resist changes in pH when small amounts of acid or base are added to it.
When an acid or base is added to a buffer solution, the buffer components react with the added ions to minimize the impact on the solution's pH. If an acid is added, the buffer will react with the acid by accepting the H⁺ ions. If a base is added, the buffer will react with the base by donating H⁺ ions. In both cases, the buffer helps maintain the pH at a relatively stable level.
To prevent an acid from dissociating, is not accurate. A buffer does not prevent an acid from dissociating. In fact, the acid in a buffer solution is necessary to provide the conjugate base and maintain the buffer's pH buffering capacity.
To neutralize the pH of a solution, is also not accurate. A buffer does not neutralize the pH of a solution to a particular value. Instead, it resists significant changes in pH when small amounts of acid or base are added.
To prevent a salt from dissolving, is unrelated to the purpose of a buffer. A buffer is not used to prevent the dissolution of salts.
Hence, A. is the correct option.
To know more about buffer here
https://brainly.com/question/31847096
#SPJ2
make this and tell me how u like it its fat lady from hairy pawter find the pics on elgoog or use mine movie and site was changed its on scratch a web
Answer:
are u brocken
Explanation:
Which has the highest heat capacity? (Values of heat capacities and calculations are unnecessary). a. 1000 L of liquid water b. 10 g of sand c. 1 g of Iron d. 5g of glass
Option a, 1000 L of liquid water, is likely to have the highest heat capacity among the given options.
The heat capacity of a substance refers to the amount of heat energy required to raise the temperature of that substance by a certain amount. In general, substances with higher molar masses and larger numbers of atoms or molecules tend to have higher heat capacities.
Given the options provided:
a. 1000 L of liquid water has a higher heat capacity compared to the other options because water has a relatively high molar mass and specific heat capacity.
b. 10 g of sand generally has a lower heat capacity compared to water since sand has a lower molar mass and specific heat capacity.
c. 1 g of iron has a moderate heat capacity. While iron has a higher molar mass compared to sand, it typically has a lower specific heat capacity than water.
d. 5 g of glass generally has a lower heat capacity compared to water, as glass has a lower molar mass and specific heat capacity.
Therefore, option a, 1000 L of liquid water, is likely to have the highest heat capacity among the given options.
Learn more about Specific heat capacity from the link given below.
https://brainly.com/question/1105305
#SPJ4
Which choice identifies the compound's structural formula, and what information does the structural formula provide
that the molecular formula does not?
Image B represents the structural formula, and only the structural formula allows the molecular
shape to be determined because it shows the position and alignment of the atoms and bonds.
Image B represents the structural formula, and only the structural formula allows the number of
atoms of each element in the compound to be determined because it provides subscripts.
Image A represents the structural formula, and only the structural formula allows the type of
bond formed by the compound to be determined because it shows the element symbols written
in order (metals and then nonmetals).
Image A represents the structural formula, and only the structural formula allows the bond
length of each bond between the atoms of the compound to be determined because it shows the
bonds represented by a line.
Answer:
second opinion is correct
How many moles of water are consumed if 0.729 mol H
1) State the equation that represents the chemical reaction
P2O5 + 3H2O → 2H3PO4
2) State the molar ratios: 1 mol P2O5 : 3 mol H2O : 2 mol H3PO4
3) Use the proportions 3molH2O / 2 mol H3PO4
0.729 mol H3PO4 * [ 3 mol H2O / 2 mol H3PO4] = 1.094 mol H2O
Answer: 1.094 mol of water
Answer: The answer that i got for this is 1.09 give the other kid the brainliest.
Explanation:
an unknown alkene was treated with mcpba in dichloromethane, followed by work-up with h2o/h . a racemic mixture of the compound shown below was obtained. what is correct name of the starting alkene? A. (Z)-3-Methylpent-2-ene B. (E)-3-Methylpent-2-ene C. 2-Methylpent-2-ene D. 2,3-Dimethylbut-2-ene E. none of the above
Option A. Z)-3-Methylpent-2-ene is the correct name of the starting alkene
What is a starting alkeneA starting alkene refers to the initial unsaturated hydrocarbon compound used in a chemical reaction or synthesis. It is the precursor or starting material from which other compounds or products are formed through various chemical transformations.
In organic chemistry, alkene refers to a class of hydrocarbons that contain a carbon-carbon double bond. These compounds are important intermediates in many organic reactions and serve as building blocks for the synthesis of more complex molecules.
Read mote on alkene here:https://brainly.com/question/29120960
#SPJ4
how to determine the bond order from the molecular electron configurations
Bond order can be determined by counting the total number of electrons in the bonding molecular orbitals (sigma and pi orbitals), then determining the total number of bonding electrons by subtracting the number of electrons in non-bonding orbitals from the total number of electrons and dividing the total number of bonding electrons by 2.
To determine the bond order from the molecular electron configuration, you need to follow these steps:
1. Write the molecular electron configuration for the molecule by combining the atomic electron configurations of the constituent atoms. This involves filling the molecular orbitals with electrons according to the Aufbau principle and the Pauli exclusion principle.
2. Count the total number of electrons in the bonding molecular orbitals (sigma and pi orbitals). This includes the electrons in both bonding and non-bonding orbitals.
3. Determine the total number of bonding electrons by subtracting the number of electrons in non-bonding orbitals from the total number of electrons.
4. Divide the total number of bonding electrons by 2 to get the bond order.
The bond order represents the number of electron pairs shared between two atoms in a molecule. It indicates the strength and stability of the bond. A higher bond order indicates a stronger and shorter bond.
For example, let's consider the molecular electron configuration of O2:
Oxygen (O) atomic electron configuration: 1s² 2s² 2p⁴
Combining two oxygen atoms, we get the molecular electron configuration for O₂:
σ2s² σ2s² σ2p⁴ π2p⁴
Counting the total number of electrons in the bonding orbitals, we have 2 electrons in σ2s², 2 electrons in σ2p⁴, and 4 electrons in π2p⁴. So, the total number of electrons is 8.
Since all the electrons, in this case, are bonding electrons, the total number of bonding electrons is also 8.
Dividing the total number of bonding electrons by 2, we get a bond order of 4/2 = 2.
Therefore, the bond order of O₂ is 2, indicating a double bond between the two oxygen atoms.
Learn more about bond order here:
https://brainly.com/question/12447843
#SPJ4
For the reaction :
2NH 3
(g)→N 2
(g)+3H 2
(g)
if rate of disappearance of of NH 3
is 1.7 gm/sec then rate of appearance of N 2
should be:
The Required Correct Answer for the rate of appearance of N2 is 1.4 g/s.
Explanation : Given reaction is2NH3(g) → N2(g) + 3H2(g)The stoichiometric coefficients of NH3 and N2 in the balanced chemical equation are 2 and 1 respectively, which indicates that one mole of N2 is produced for every 2 moles of NH3 consumed.The rate of disappearance of NH3 is 1.7 g/s.
Number of moles of NH3 disappearing per second can be determined by the following formula:n = m/MwWhere,n = number of moles of NH3 disappearing per secondm = mass of NH3 disappearing per secondMw = molecular weight of NH3.The molecular weight of NH3 is 17 g/mol.
So,m/Mw = 1.7/17= 0.1 mole/sNow we know that 2 moles of NH3 produce 1 mole of N2. Hence, 0.1 mole/s of NH3 will produce (1/2) × 0.1 = 0.05 mole/s of N2The mass of N2 produced can be calculated by using the formula:m = n × MwThe molecular weight of N2 is 28 g/mol.So, m = 0.05 × 28= 1.4 g/s
Therefore, the rate of appearance of N2 is 1.4 g/s.
Learn more about rate of appearance of a reaction here https://brainly.in/question/56331389
#SPJ11
Too many objects inside a laboratory fume hood can disrupt the airflow and possibly compromise your safety. Which of the following are considered best practices in the use of a laboratory fume hood? Select all that apply. Then, select Submit. O Open the sash as much as possible O Work at least 25 cm inside the hood O Use fast, quick movements to limit your exposure O Place objects to one side-work on the other side O Use a raised shelf along the back of the hood
A laboratory fume hood, also known as a fume cupboard or fume cabinet, is a specially designed enclosure used in laboratories to protect workers from exposure to hazardous fumes, gases, vapors, or dust. The correct answer is:
1. Open the sash as much as possible
2. Work at least 25 cm inside the hood
4. Place objects to one side-work on the other side
5. Use a raised shelf along the back of the hood.
A fume hood typically consists of a transparent sash or door at the front that can be opened or closed, allowing access to the work area inside the hood. The hood is connected to an exhaust system that draws air through the hood, creating a negative pressure inside and preventing the escape of hazardous substances into the laboratory environment.
Opening the sash allows for better airflow and reduces the buildup of hazardous substances inside the hood. Working inside the hood ensures that you are within the protected area where airflow is present. Placing objects to one side of the hood and working on the other side helps maintain a clear and unobstructed airflow path. Using a raised shelf along the back of the hood allows for better organization of materials and equipment, keeping them within reach but away from the front of the hood.
Therefore, the correct options are:
1. Open the sash as much as possible
2. Work at least 25 cm inside the hood
4. Place objects to one side-work on the other side
5. Use a raised shelf along the back of the hood.
For more details regarding laboratory fume hood, visit:
https://brainly.com/question/10166359
#SPJ12
Best practices for using a lab fume hood include not opening the sash more than necessary, working at least 25 cm inside the hood, using slow, steady movements, arranging objects to one side, and using a raised shelf along the back of the hood. Much like fume hoods, biological safety cabinets use containment and directional airflow for safety.
Explanation:When using a laboratory fume hood, it's crucial to observe best practices to ensure safety. The best practices include:
Not opening the sash more than necessary, because it can disrupt the airflow. Working at least 25 cm inside the hood which ensures that you are adequately protected from the fumes and that the airflow is not disrupted. Using slow, steady movements rather than fast, quick ones, limiting the chances of airborne particles being generated or disrupting the airflow. Arranging objects so they don't block the airflow - it's usually better to place objects to one side and work on the other. Using a raised shelf along the back of the hood can help to optimize airflow and improve safety.
Laboratory biological safety cabinets, or BSCs, also use a similar principle of containment and directional airflow to protect lab workers and the environment from exposure to hazards. For instance, Class I BSCs use air intake filters to prevent environmental contaminants from entering the workspace and air exhaust filters to contain pathogens within the hood.
Learn more about Laboratory Safety here:https://brainly.com/question/33592496
#SPJ6
What volume of 0.062 M HCl is needed to react to completely neutralize 19.4 mL of 0.050 M Ba(OH)2? *
Answer:
31.3 mL
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2HCl + Ba(OH)₂ —> BaCl₂ + 2H₂O
From the balanced equation above,
The mole ratio of the acid, HCl (nₐ) = 2
The mole ratio of the base, Ba(OH)₂ (n₆) = 1
Finally, we shall determine the volume of the acid need for the reaction as follow:
Molarity of acid, HCl (Mₐ) = 0.062 M
Mole ratio of the acid, HCl (nₐ) = 2
Volume of base, Ba(OH)₂ (V₆) = 19.4 mL
Molarity of base, Ba(OH)₂ (M₆) = 0.050 M
Mole ratio of the base, Ba(OH)₂ (n₆) = 1
Volume of acid, HCl (Vₐ) =?
MₐVₐ / M₆V₆ = nₐ / n₆
0.062 × Vₐ / 0.050 × 19.4 = 2/1
0.062 × Vₐ / 0.97 = 2
Cross multiply
0.062 × Vₐ = 0.97 × 2
0.062 × Vₐ = 1.94
Divide both side by 0.062
Vₐ = 1.94 / 0.062
Vₐ = 31.3 mL
Thus, the volume of the acid needed is 31.3 mL
!!MARKING BRAINLIEST!! Please help this is due at midnight!! No websites please just help me! :(
Answer:
I'll do the first one for you. The reason why I'm not going to do the rest is because this is pretty simple stuff. I'll explain how I got the answer, please read it ^^ the rest of the problems should be a breeze.
1. 5.454285714285714 liters, or approx. 5.45 liters
Explanation:
P1V2 = P2V2
P1 refers to the original pressure. V1 refers to the original volume, or the amount of space the gas takes up.
P2 and V2 refer to the final pressure or volume, accordingly.
You insert the values into the equation, like so:
(8.3)(46) = (70)(x)
Now, multiply.
381.8 = 70x
Use inverse operations to find the value of x. Divide 381.8 by 70 to isolate x.
381.8/70 = x
5.454285714285714 = x
The volume of the gas when the pressure is increased to 70.0 mm Hg is approximately 5.45 liters. Don't forget about the units at the end, when you write your final answer.
Important! When pressure increases, volume decreases, and vice versa. Volume and pressure for gases are inversely proportional. So even though the pressure increased, that doesn't mean the volume increases, too.
You can check your answers easily!
Just multiply your final answer by its corresponding pressure or volume and compare it to the other. I hope that made sense. Like so:
5.454285714285714 x 70 = 381.8
8.3 x 46 = 381.8
That makes P1V2 DOES equal P2V2, and your answer is correct.
I hope this helped in time for you to submit it before the deadline! Good luck.
Tips!
For #2: I'm pretty sure the mentioning of the temperature (25.0 °C) doesn't matter. You can ignore it, it won't affect your calculations.
For #4: the standard pressure in mm Hg (millimeters of mercury) is 760 mm Hg. That's your P2.
why should atom or ions join together to form compounds?
Answer:
while atoms form together, they percentage their outermost electrons to create more sustainable strength states. This sharing bonds the atoms into an ionic shape or a molecule
Explanation:
i hope this help a little
(1) calculate the energy of the red light emitted by a neon atom with a wavelength of 703.2 nm.
The energy of red light emitted by a neon atom with a wavelength of 703.2 nm is approximately [tex]2.83 * 10^-19 J[/tex]. The correct answer is E.
To calculate the energy of the red light emitted by a neon atom with a wavelength of 703.2 nm, we can use the equation:
[tex]E=\frac{hc}{\lambda}[/tex]
where:
E is the energy,
h is Planck's constant ([tex]6.62607015 * 10^{-34) J.s[/tex]),
c is the speed of light in a vacuum ([tex]2.998 *10^{8} m/s[/tex]),
and [tex]\lambda[/tex] is the wavelength of the light.
Let's substitute the given values into the equation:
[tex]E=\frac{(6.62607015*10^ -34 J.s)(2.998*10^8 m/s)}{703.2*10^-9m}[/tex]
Calculating this expression, we find:
[tex]E=2.83*10^-19 J[/tex]
Therefore, the energy of the red light emitted by a neon atom with a wavelength of 703.2 nm is approximately[tex]2.83 * 10^-19 J.[/tex]
From the options provided, the closest answer is E) [tex]2.83 * 10^-19 J.[/tex]
To know more about Atoms
https://brainly.com/question/6258301
#SPJ4
The complete question is:
11) Calculate the energy of the red light emitted by a neon atom with a wavelength of 703 2 nm.
A) 3.54 x 10-19)
B) 4.27 x 10-19)
C) 2.34 x 10-19
D) 6,45 x 10-19 J
E) 2.83 x 10-19)
Element
H
Ba
Si
Group
1
2
6A
10
Period
3
4
The element "H" belongs to Group 1 and Period 1 of the periodic table. It is hydrogen, the lightest and most abundant element in the universe.
The element "Ba" belongs to Group 2 and Period 6 of the periodic table. It is barium, a soft, silvery-white alkaline earth metal.
The element "Si" belongs to Group 14 and Period 3 of the periodic table. It is silicon, a hard, brittle crystalline solid with a grayish color.
The element "H" belongs to Group 1 and Period 1 of the periodic table. It is hydrogen, the lightest and most abundant element in the universe. Hydrogen has one proton and one electron in its nucleus, and it is classified as a nonmetal.
It is highly reactive and can form compounds with other elements through various chemical reactions. Hydrogen plays a crucial role in the formation of water (H2O) and is used in various industrial processes, such as hydrogenation in the production of margarine and ammonia synthesis for fertilizer production.
The element "Ba" belongs to Group 2 and Period 6 of the periodic table. It is barium, a soft, silvery-white alkaline earth metal. Barium has an atomic number of 56, meaning it has 56 protons in its nucleus.
It is highly reactive and reacts vigorously with water and oxygen in the air. Barium compounds, such as barium sulfate and barium carbonate, have various applications, including in the production of pigments, glass, and fireworks. Barium is also used in medical imaging procedures, where barium sulfate is ingested or injected to visualize the gastrointestinal tract.
The element "Si" belongs to Group 14 and Period 3 of the periodic table. It is silicon, a hard, brittle crystalline solid with a grayish color. Silicon is a semiconductor and is widely used in the electronics industry for the production of computer chips, solar cells, and other electronic devices.
It has atomic number 14 and forms an important component of the Earth's crust, making up around 28% of its mass. Silicon is also a key element in the structure of many minerals, such as quartz and feldspar.
For more such questions on hydrogen visit:
https://brainly.com/question/24433860
#SPJ8
Anyone know how to do this? It’s for Chemisty
T/F if you take an antacid tablet, the ph in your stomach will increase. this means your stomach juice becomes more acidic.
If you take an antacid tablet, the ph in your stomach will increase. this means your stomach juice becomes more acidic - False
The stomach's pH will rise if a person takes an antacid pill. Antacids neutralise excess stomach acid to treat conditions like gastroesophageal reflux disease, heartburn, and acid indigestion. They usually consist of elements such as calcium carbonate, magnesium or aluminium hydroxide; when coupled with stomach acid, these elements react to form salts and water.
Antacids reduce the acidity of the stomach contents by raising the pH level and neutralising the stomach's acid. This can aid in reducing the symptoms brought on by excessive acid production. Therefore, it is untrue that taking an antacid increases the acidity of the stomach liquid.
Read more about stomach on:
https://brainly.com/question/29812006
#SPJ4
Which noble gas is expected to show the largest deviations from the ideal gas behavior? A) helium B) neon C) argon D) krypton E) xenon why
he molar volume of a gas at STP is __________ L.
A) 0.08206
B) 62.36
C) 1.00
D) 22.4
E) 14.7
The noble gas expected to show the largest deviations from the ideal gas behavior is Xenon (Xe).The molar volume of a gas at STP is 22.4 L. This is because 1 mole of gas occupies 22.4 L of volume at 0°C and 1 atm pressure
The ideal gas behavior is only possible at low pressures and high temperatures. A gas can be assumed to be ideal if its atoms or molecules are far apart and there is no interaction between them. Since noble gases are monatomic gases and their atoms are quite far apart, they are expected to behave like ideal gases.However, xenon is the largest of all noble gases, and its atoms have large sizes and masses. As a result, they experience stronger attractive forces between atoms than the other noble gases, leading to deviations from ideal gas behavior.The molar volume of a gas at STP is 22.4 L. This is because 1 mole of gas occupies 22.4 L of volume at 0°C and 1 atm pressure. Hence, the correct answer is option D) 22.4.
Learn more about noble gas here:
https://brainly.com/question/32007931
#SPJ11