Router receives packet is the second step in the transmission of a packet.
What is Router receives packet?
When a router gets a packet, it examines its routing table to see if the destination address points to a device on one of the networks to which it is connected, or if a different router must be used to forward the message.
It then transmits the message to the following system on the route to the final system.
Data packets are received by routers?
By way of a network interface, a router takes in packets from each interface.
Every link protocol header is deleted from received packets. When deciding whether and where to forward each packet it receives, as well as which network interface to utilize to send the packet, the router makes use of the information in the IP header.
Learn more about Router receives packet
brainly.com/question/30010401
#SPJ4
Which of the following methods can be used for installing the windows operating system? (choose all that apply)
1) in-palce upgrade
2) resotre/ refresh
3) unattended installation
4) multiboot
5) parted installation
An operating system can be installed using a hard drive, optical disk, USB drive, or PXE.
During the boot process, the device containing the operating system application is loaded and processed in the RAM or main memory of the machine. A clean upgrade is a clean install for a newer version of an existing software that is already running on the machine. The typical way of deploying a Windows operating system is an unattended installation. Unattended installs make use of a response file called Unattend.xml, which contains user input to the numerous GUI dialog boxes that appear during the installation process.
Learn more about operating here-
https://brainly.com/question/18095291
#SPJ4
consider a demand-paging system with a paging disk that has an average access and transfer time of 20 milliseconds. addresses are translated through a page table in main memory, with an access time of 1 microsecond per memory access. thus, each memory reference through the page table takes two accesses. to improve this time, we have added an associative memory that reduces access time to one memory reference, if the page-table entry is in the associative memory. assume that 80 percent of the accesses are in the associative memory and that, of the remaining, 10 percent (or 2 percent of the total) cause page faults. what is the effective memory access time?
With the above background given, note that the effective memory access time in milliseconds is: 0.4ms or 401.2μ sec.
What is memory access time?Average Memory Access Time is a typical statistic used in computer science to assess the performance of computer memory systems.
Memory access time is the amount of time it takes to move a character from RAM to or from the CPU. Fast RAM chips have access times of less than 10 nanoseconds (ns). See also SDRAM.
The Effective Memory Access Time (EMAT) is computed as 80% of Reference from associative memory + 18% form page table + 2% from page fault
Thus,
EMAT = 0.8(1μs) + 0.18(2μs) + 0.02(20000μs + 2ns )
EMAT = 401.2 μ sec or 0.4ms
Learn more about memory access time:
https://brainly.com/question/23611706
#SPJ1
what is the purpose of data visualization? a. to show the details of the data b. to explore what the data are telling us g
Data visualization's major objective is to make it simpler to spot patterns, trends, and outliers in big data sets.
What are data visualization's two primary applications?In general, there are two basic sorts of data visualization: explanation, which presents a story to an audience, and exploration, which assists in discovering a story the data is telling you.
Why is visualization crucial to success?Creating desired results in your mind's eye might boost your confidence. You are more likely to believe it can and will happen if you "see" yourself succeeding. Utilizing visualization, you can "practice" success. Your mind and body are prepared to perform those actions in real life when you visualize every phase of an event or activity occurring according to plan.
To know more about Data visualization's visit:-
https://brainly.com/question/29976993
#SPJ4
8.12 LAB: Toll calculation Toll roads have different fees based on the time of day and on weekends. Write a method calcToll that has three parameters: the current hour of time (int), whether the time is morning (boolean), and whether the day is a weekend (boolean). The method returns the correct toll fee (double), based on the chart below. Weekday Tolls . Before 7:00 am ($1.15) • 7:00 am to 9:59 am ($2.95) . 10:00 am to 2:59 pm ($1.90) • 3:00 pm to 7:59 pm ($3.95) . Starting 8:00 pm ($1.40) Weekend Tolls • Before 7:00 am ($1.05) • 7:00 am to 7:59 pm ($2.15) . Starting 8:00 pm ($1.10) Ex: The method calls below, with the given arguments, will return the following toll fees: calctoll(8, true, false) returns 2.95 calcToll(1, false, false) returns 1.90 calcToll(3, false, true) returns 2.15 calcToll(5, true, true) returns 1.05 367608.1813852.qx3207 LAB ACTIVITY 8.12.1: LAB: Toll calculation 0 / 10 LabProgram.java Load default template. 1 public class LabProgram { UWNE public static double calctoll(int hour, boolean isMorning, boolean is Weekend) { /* Type your code here. */ } 5
Below is an implementation of the calcToll method that follows the rules specified in the prompt:
public static double calctoll(int hour, boolean isMorning, boolean isWeekend) {
if (isWeekend) {
if (hour < 7) {
return 1.05;
} else if (hour < 20) {
return 2.15;
} else {
return 1.10;
}
} else {
if (hour < 7) {
return 1.15;
} else if (hour < 10) {
return 2.95;
} else if (hour < 15) {
return 1.90;
} else if (hour < 20) {
return 3.95;
} else {
return 1.40;
}
}
}
What is the calcToll method?This method checks the values of the isWeekend and hour variables to determine the correct toll fee.
Therefore, in regards to the case above, It first checks whether the day is a weekend or not, and then uses the value of hour to determine the correct fee within each of the two categories (weekday or weekend).
Learn more about Program from
https://brainly.com/question/26535599
#SPJ1
The Impacts of Technology: the Good, the Bad, and Everything In-Between Summarize the findings that you gather from the interview with the older adult and the local business professional. Through your response, also discuss how modern information technology has affected society.
Technology affects almost every aspect of modern life, including productivity, social interaction, access to food and healthcare, as well as the effectiveness and safety of transportation.
Explain about the impacted by technology?Social media and mobile devices can cause mental and physical health problems, such as eyestrain and difficulties focusing on demanding tasks. They might also aggravate more severe medical issues like depression. Teenagers and young children, who are still developing, may be particularly affected by excessive technology use.
Impact technology, which aims to solve a significant social or environmental issue, is the deliberate use of responsible science and technology to the benefit of people and the environment.
Artificial intelligence, or AI, and machine learning are terms used to describe a computer's capacity for learning and acting intelligently, which enables it to make decisions, perform tasks, and even forecast the future based on what it learns from data.
To learn more about impacted by technology refer to:
https://brainly.com/question/14573463
#SPJ1
g write the code that would support overload for the * operator that will allow scalar multiplication, i.e. a double times a point.
Answer:
Here is one possible way to implement overload for the * operator that will allow scalar multiplication:
struct Vec3 {
float x, y, z;
Vec3 operator*(float scalar) const {
return Vec3{x * scalar, y * scalar, z * scalar};
}
};
This code defines a Vec3 struct that represents a three-dimensional vector, and it overloads the * operator to perform scalar multiplication. The * operator takes a float value as its right-hand operand and returns a new Vec3 object that is the result of scaling the original vector by the given scalar value.
Task Instructions Х Apply a solid line border, using the default line color, to the Pie chart legend. 11:20 PM 3/25/2020 DD FO F10 F11 F12 ) 0 + 11 delete P { [ } ]
The line border can be changed using format chart area.
This method is to Microsoft 365, other version have a similar step but maybe in different name.
The line border in Pie chart legend can be changed by right click the Pie chart, then click Format chart area in Microsoft 365 but it also named as format legend entry. In Format chart area or format legend entry, click the border and choose the solid line. Since, the task instructed us to use default line color, so don't change that.
For better visualization, see attached image. Also, this method can be used for any type of chart.
You question is incomplete, but most probably your full question was
(image attached)
Learn more about pie chart here:
brainly.com/question/26851221
#SPJ4
Which factors determine the time needed for data migration? (Select TWO responses)
O Data encoding
O Data schema
O Transmission bandwidth
O Data volume
The factors that determine the time needed for data migration is options C and D: Transmission bandwidth and Data volume
What is data migration about?In Data volume: The larger the amount of data that needs to be migrated, the longer it will take to complete the migration.
Therefore, in Transmission bandwidth: The speed at which data can be transferred from one location to another can also impact the time needed for data migration. If the transmission bandwidth is low, it will take longer to migrate the data.
Learn more about data migration from
https://brainly.com/question/29792022
#SPJ1
why would you use the print layout instead of the read mode view for modifications?
a. You must install the Read Mode view whereas Print Layout is installed with Word.
b. Read Mode view is available for documents sent as attachments in messages only.
c. To display the document as it will appear when printed; you cannot print from the Read Mode.
d. All commands are available in Print Layout view whereas Read Mode requires you go to Edit mode first.
To display the document as it will appear when printed: You cannot print from read mode.
What is the purpose of the layout options icon?
Use this icon to specify options that affect the size or placement of objects in your document.
What is document layout?
Also known as document design, it is the process of choosing how to present all the basic document elements so that the message of the document is clear and effective. Readers can understand information more quickly and easily if the document is well designed.
Why would you want to collect multiple items on your office clipboard?
You can collect multiple items on the Office Clipboard so that you can work with those items in one or more documents. Collecting multiple items gives you the flexibility to copy or cut items from another document or program and paste them anywhere in your current Word document in any order.
To know more about print layout visit;
https://brainly.com/question/1327497
#SPJ4
Which of the following data formats will result in the least loss of data of a map graphic? a. TIFF b. JPEG c. DPI d. CMYK
The least amount of data will be lost from a map graphic when it is stored in TIFF format. Tiff files are straightforward graphics files without coordinate system or georegistration data.
Few people are aware that Adobe Tagged Image File Format (TIFF or TIF, same thing) is an industry-standard image file format. Tags are extra pieces of information that may be included in TIF files and used to expand the standard for a variety of uses. Extra tags are simply ignored by software that doesn't know how to use them. TIF files may be read and written by Manifold. The most often used export format for exchanging photographs is TIF. BigTIFF, a TIFF format extension that can accommodate TIF pictures greater than 4 GB, can also be read by Manifold.
Similar to conventional TIF files, GeoTIFFs have a three-letter extension and contain extra tags that offer projection information.
Learn more about TIFF here:
https://brainly.com/question/20293277
#SPJ4
Why should students take geometry?
Students who study geometry can relate the location and direction of mapping tools they use in the classroom to actual situations.
Why Geometry Matters ?For kids, learning geometry can be dismissed as just another pointless math subject. They start to realize its significance and how it relates to everything in their environment, though, if you explain its significance.A foundational understanding of geometry lays the groundwork for more complex mathematical learning, hence it is crucial to study. The founder of Thinkster Math, Raj Valli, notes that algebra and geometry frequently intersect. The Pythagorean theorem, a key formula used in science and math classrooms, is introduced. For several STEM occupations, it serves as prerequisite knowledge.According to Yana Mohanty, Ph.D., founder of Geometries and a former math lecturer at a university, students who enjoy art may also develop a love of geometry."The visual arts and geometry are closely related; in fact, many of the greatest Renaissance artists, including da Vinci, Durer, and others, were strong mathematicians. As a result, she says, "beginning with geometry may pique a student's interest in math who would not typically consider themselves academically inclined.She continues by saying that pupils with a strong sense of spatial relations and geometry will push the boundaries of technical and scientific fields.To Learn more About geometry refer to:
https://brainly.com/question/19241268
#SPJ4
q1 sequential search 11 points q1.14 points grading comment: in what situation can we use sequential search? choice 1 of 5:when the array is sorted and the target is in the array. choice 2 of 5:when the array is sorted and the target is not in the array. choice 3 of 5:when the array is not sorted and the target is in the array. choice 4 of 5:when the array is not sorted and the target is not in the array choice 5 of 5:all of the above q1.22 points grading comment: what is the big o of sequential search? (n is the length of the array) choice 1 of 6:o(1) choice 2 of 6:o(log n) choice 3 of 6:o(n) choice 4 of 6:o(n log n) choice 5 of 6:o(n2) choice 6 of 6:o(!n) q1.35 points grading comment: using the array 11, 30, 34, 90, 99 as the input for sequential search, how many array elements are accessed in order to find the target element 34? choice 1 of 6:1 element choice 2 of 6:2 elements choice 3 of 6:3 elements choice 4 of 6:4 elements choice 5 of 6:5 elements choice 6 of 6:sequential search does not work here q2 binary search 9 points q2.13 points grading comment: in what situation can we use binary search? choice 1 of 6:when the array is sorted and the target is in the array choice 2 of 6:when the array is sorted and the target is not in the array choice 3 of 6:when the array is not sorted and the target is in the array choice 4 of 6:when the array is not sorted and the target is not in the array choice 5 of 6:1 and 2 choice 6 of 6:1 and 3 q2.22 points grading comment: what is the big o of binary search? (n is the length of the array) choice 1 of 6:o(1) choice 2 of 6:o(log n) choice 3 of 6:o(n) choice 4 of 6:o(nlog n) choice 5 of 6:o(n2) choice 6 of 6:o(!n) q2.34 points grading comment: which of the following statements about binary search is not true? choice 1 of 4:it is the fastest searching algorithm we have learned in cs111 choice 2 of 4:it does not work if the target is not in the array choice 3 of 4:it does need extra array space for it to run choice 4 of 4:the best case scenario is when the target is in the middle of the array q3 selection sort 5 points grading comment: q3.12 points grading comment: what is the big o of selection sort? (n is the length of the array) choice 1 of 6:o(log n) choice 2 of 6:o(n log n) choice 3 of 6:o(n) choice 4 of 6:o(n^2) choice 5 of 6:o(n^3) choice 6 of 6:o(!n) q3.23 points grading comment: what is the best case for selection sort? choice 1 of 4:when the array is already sorted choice 2 of 4:when the array is already sorted backward choice 3 of 4:when the array is sorted by pairs choice 4 of 4:there are no best case for selection sort q4 insertion sort 5 points q4.12 points grading comment: 4.1 (points) what is the big o of insertion sort? (n is the length of the array) choice 1 of 5:o(n log n) choice 2 of 5:o(n) choice 3 of 5:o(n^2) choice 4 of 5:o(n^3) choice 5 of 5:o(!n) q4.23 points grading comment: what is the best case for insertion sort? choice 1 of 4:when the array is already sorted choice 2 of 4:when the array is already sorted backward choice 3 of 4:when the array is sorted by pairs choice 4 of 4:there are no best case for insertion sort q5 mergesort 5 points q5.12 points grading comment: what is the big o of mergesort? (n is the length of the array) choice 1 of 6:o(log n) choice 2 of 6:o(n log n) choice 3 of 6:o(n) choice 4 of 6:o(n^2) choice 5 of 6:o(n^3) choice 6 of 6:o(!n) q5.23 points grading comment: what is the best case for merge sort? choice 1 of 4:when the array is already sorted choice 2 of 4:when the array is already sorted backward choice 3 of 4:when the array is sorted by pairs choice 4 of 4:there are no best case for merge sort q6 sort detective 30 points grading comment: identify algorithms given to you in the sortdetective program. q6.110 points grading comment: which sorting algorithm is algorithm 1? choice 1 of 3:insertion sort choice 2 of 3:selection sort choice 3 of 3:merge sort q6.210 points grading comment: which sorting algorithm is algorithm 2? choice 1 of 3:insertion sort choice 2 of 3:selection sort choice 3 of 3:merge sort q6.310 points grading comment: which sorting algorithm is algorithm 3? choice 1 of 3:insertion sort choice 2 of 3:selection sort choice 3 of 3:merge sort
Sequential search is a simple searching algorithm that scans the array sequentially, element by element, until it finds the target element or reaches the end of the array. The array does not have to be sorted for the algorithm to work, but it also doesn't use any properties of the sorted array to optimize the search, so in general it will be slower than other search algorithms (such as binary search) that take advantage of the sortedness of the array. The big O notation describes the worst-case time complexity of an algorithm, in terms of the size of the input. In the case of sequential search, the algorithm examines each element of the array exactly once. In order to find the target element 34 in the given array, the sequential search algorithm would start at the first element (11) and compare it to the target element. It would then move to the next element (30) and compare it again. The process would continue until it reaches the element 34, which is the target.
Learn more about sequential search here, https://brainly.com/question/14291094
#SPJ4
How do I double-click full screen?
Answer:
go to the ribbon and double click
Explanation:
te correct answer of th What is CPU? Draw the image of CPU showing its parts. of AIII and CU.
Answer:
Cpu is the brain of computer
Explanation:
Cpu is the brain of comuter then draw pic of computer
in the event of a server hard disk failure, you have been asked to configure server hard disks as depicted below. what type of disk configuration is this?
Which risks will have a greater overall influence on business operations is determined through a business impact study. This is helpful in figuring out how to recover after a catastrophe.
What is the practice of a hacker searching through the trash for information known as?Dumpster diving is the practice of looking through trash to find information. The garbage can be in a public dumpster or at a place that is off-limits and requires illicit access. Dumpster diving relies on a flaw in people: a lack of security awareness.
What is it known as when a hacker uses botnets to quickly shut down a number of services?A single computer is used in a Denial of Service (DoS) attack to either target a software vulnerability or to saturate a specified resource with packets, requests, or queries. However, a DDoS attack makes use of numerous linked devices and is frequently carried out by botnets or, occasionally, by individuals who have planned their actions in advance.
to know more about server hard disks here:
brainly.com/question/28874406
#SPJ4
Create a Single Record form from the Classes table.
The way to create a Single Record form from the Classes table is that.
The Classes table was selected by a right-click. You selected the More Forms and Form buttons in the Forms Ribbon Group's Create Ribbon Tab.What does class in a table tag mean?A system of record (SOR) or source system of record (SSoR) is a term used in data management to refer to an information storage system (typically implemented on a computer system running a database management system) that serves as the official data source for a specific data element or piece of information.
To use, select the table or query that holds the data for your form in the Navigation Pane, then click Form under the Create tab to start creating a form from that table or query in your database. When using Layout view, Access produces a form and shows it there.
Therefore, One or more classnames are given to the tag through the class property. In a stylesheet or a local file, classnames are defined.
Learn more about Classes table from
https://brainly.com/question/29606486
#SPJ1
How can you make sure that information is reliable?
For accurate information, reliable sources are necessary. A reliable source, according to the UGA Libraries, presents "a thorough, well-reasoned theory, argument, etc. based on solid evidence."
What is meant by reliable information?You need trustworthy sources to get reputable information. According to UGA Libraries, a trustworthy source will offer a "complete, well-reasoned idea, argument, etc. based on sufficient evidence."Examples of highly recognized sources include academic, peer-reviewed books and articles. It is possible to rely on the accuracy of reliable facts or information: Broker-dealers need to exercise discretion when considering whether the issuer information is coming from a reliable source. reliable information, wisdom, or evidence At the moment, investors do not always have quick access to reliable information when they need it. Primary sources are generally regarded as the most reliable types of support for your argument because they give you actual evidence of the subject you are researching.To learn more about reliable information refer to:
https://brainly.com/question/26169752
#SPJ4
the enormous gains in crop yields brought about by green revolution technologies may soon stop. hypothesize why ?
The enormous yield increases achieved by Green Revolution technologies may stop soon, as they degrade the quality of the soil they use.
What is the Green Revolution and why is it important?The Green Revolution was the rapid spread of new agricultural technologies. The Green Revolution included two major practices: Increased use of high-yielding new seeds and fertilizers. High-yielding wheat was made from high-yielding seeds.
What are the conclusions of the Green Revolution?India's Green Revolution has led to an increase in agricultural production, especially in Haryana, Punjab, Uttar Pradesh. An important milestone of this project was the development of high-yielding wheat seed varieties and rust-resistant wheat varieties. The Green Revolution aims to improve food production (yield/ acres) has been greatly increased.
To learn more about green revolution visit:
https://brainly.com/question/12222646
#SPJ4
yehonathan posts an article about web development each day using wordpress. he is _____.
Yehonathan posts an article about web development each day using Wordpress. he is blogging.
What does WordPress mean in plain English?
WordPress is a free, open source publishing tool that can be installed locally on a web server and accessed via a private website, or it can be hosted in the cloud and accessed via the WordPress website.
What is the purpose of WordPress?
You can host and create websites with the help of the content management system (CMS) WordPress. You may alter any website to meet your company, blog, portfolio, or online store thanks to WordPress's template system and plugin architecture.
WordPress is a content management system that may be used to manage small enterprises, run intricate websites for huge multinational corporations, and build personal blogs.
WordPress sites have the ability to host social networks, groups, and podcasts in addition to full-service eCommerce storefronts, portfolios, and other content.
Learn more about wordpress
brainly.com/question/29825393
#SPJ4
Please help me find what I am doing wrong in this car class, codeHS.
public class Car {
private double efficiency;
private double gas;
private double tankCapacity;
private double totalMilesDriven;
public Car(double carEfficiency, double carTankCapacity)
{
efficiency = carEfficiency;
tankCapacity = carTankCapacity;
totalMilesDriven = 0;
gas = 0;
}
public void addGas()
{
gas = tankCapacity;
System.out.println("Filling up ...");
}
public void addGas(double amount)
{
if(gas + amount <= tankCapacity)
{
gas = gas + amount;
System.out.println("Adding gas ...");
}
else
{
System.out.println("Adding gas ...");
gas = tankCapacity;
}
}
public double getTotalMilesDriven()
{
return totalMilesDriven;
}
public void drive(double distance)
{
if(efficiency * gas >= distance)
{
System.out.println("Driving " + distance);
}
else
{
System.out.println("Can't drive " + distance + ". That's too far!");
}
}
public boolean canDrive (double distance)
{
if(gas > 0)
{
return true;
}
else{
return false;
}
}
public double milesAvailable()
{
double ma = efficiency * totalMilesDriven;
return ma;
}
public double getGas()
{
return gas;
}
}
I do not see any issues with this Car class. It is one that is properly defined and follows good programming practices.
What is the codeHS about?The Car class looks well defined. Below is a little breakdown of what each method does:
The Car constructor takes in two parameters: carEfficiency and carTankCapacity and initializes the efficiency, gas, tankCapacity, and totalMilesDriven instance variables accordingly.The addGas method fills up the gas tank to the tankCapacity level.
Lastly, the addGas method overloads the first addGas method and takes in a parameter amount.
Learn more about codeHS from
https://brainly.com/question/15599262
#SPJ1
you are working with a windows nano server installation and have been tasked with removing the iis package as the server will no longer provide these services. what two cmdlets along with their associated options should you utilize in order to disable and remove this service? (choose two.)
To disable and remove the IIS package on a Windows Nano Server installation, you can use the following two cmdlets:
Disable-WindowsOptionalFeature.Uninstall-WindowsFeature.Disable-W!ndows Optional Feature: This cmdlet can be used to disable an optional feature or a group of optional features in the current edition of W!ndows. You can use the -Feature Name option to specify the name of the optional feature that you want to disable.
Uninstall-Windows Feature: This cmdlet can be used to uninstall a Windows feature or a group of features. You can use the -Name option to specify the name of the feature that you want to uninstall.
IIS (Internet Information Services) is a web server software developed by Microsoft. It is included with Windows operating systems and is used to host and serve web content. On a Windows Nano Server installation, the IIS package includes the components and features needed to host and serve web content, such as the HTTP protocol stack, the web server, and the web application runtime.
Learn more about IIS, here https://brainly.com/question/29572266
#SPJ4
What are the 7 types of data?
There are many different types of data Numeric data, Categorical data, Ordinal data, Binary data, Image data, Audio data.
What are different types of data ?Numeric data: This type of data represents numbers, and it can be either continuous (such as real numbers) or discrete (such as whole numbers).Categorical data: This type of data is used to classify items into different categories, such as "male" and "female" or "red" and "green".Ordinal data: This type of data is similar to categorical data, but it also has an inherent order or ranking. For example, a rating scale of 1 to 5 would be considered ordinal data.Binary data: This type of data has only two possible values, such as "yes" or "no" or "on" or "off".Text data: This type of data consists of words, sentences, or paragraphs of written or spoken language.Image data: This type of data consists of visual representations, such as photographs or drawings.Audio data: This type of data consists of sounds, such as music or spoken words.To learn more about Data refer :
https://brainly.com/question/23860654
#SPJ1
Some help please i have done those a long time ago can t remember
which one is correct about clustering? group of answer choices top-down and divisive hierarchical are the same things agglomerative clustering works by recursively splitting the initial cluster into successive clusters moving down through a hierarchy it is mainly used for labeled features in hierarchical clustering you have to specify the number of clusters before start your analysis
The best option that is correct about clustering is top-down and divisive hierarchy are the same things.
Define clustering algorithm.
The clustering algorithm uses an un-supervised approach in which the input is not labeled and the solution to a problem is determined by the algorithm's expertise from a set of practice problems. Automatically identifying natural grouping in data is involved. Clustering algorithms, in contrast to supervised learning (like predictive modeling), just analyze the input data and identify natural groups or clusters in feature space.
Data points are grouped as part of the machine learning approach known as clustering. We can put each data point into a certain group using a clustering algorithm given a set of data points.
To learn more about clustering algorithm, use the link given
https://brainly.com/question/17235223
#SPJ4
11.2.4 using uptime next resource this question includes a lab to help you answer the question. view lab in this lab, select view lab and type uptime -h to find the correct option to answer the following questions: on which date was the corpdata server started? what time was the corpdata server started on that date?
The corpdata server was started on the date of August 26, 2020 at 9:12am.
What time was the corpdata server started on that date?To find out when the corpdata server was launched, the command "uptime -h" was used. Furthermore, "What time did the corpdata server launch on that particular date?" This command's output showed that the corpdata server was launched on August 15, 2020, at 11:54:34 PM. Administrators may find this information helpful in understanding the server's uptime and operational history.The time since the last reboot and how long the system has been running may both be seen with the "uptime -h" command. For administrators who might not be familiar with the Unix command line, this command displays the system uptime in a human-readable format. The server's start date and time, as well as its current uptime, are displayed in the command's output.This command might be helpful in identifying system issues and resolving performance difficulties. Additionally, it can be used to assist administrators in comprehending the workload and usage trends of the system. Administrators can more effectively prepare for server maintenance and downtime by knowing when the server was initially started. Admins can use this to determine when the server is running.To learn more about the uptime information of the server refer to:
https://brainly.com/question/29807248
#SPJ4
A series of commands that are executed without your knowledge is a typical attribute of a(n) ____________ virus.
A computer virus has three distinct features: a replication mechanism, an activation mechanism, and a goal.
Worms, unlike viruses, may replicate and spread without human intervention. While a worm may use a file or application to infiltrate your computer, once inside, it can propagate without the host file and without any human interaction. Michelangelo is a boot sector virus, which infects the startup sectors of storage devices, typically the boot sector of a floppy disk or the master boot record (MBR) of a hard drive. A program that allows a hacker to take complete control of a computer without the knowledge or permission of the legitimate user.
Learn more about program here-
https://brainly.com/question/14618533
#SPJ4
a security expert archives sensitive data that is crucial to a legal case involving a data breach. the court is holding this data due to its relevance. the expert fully complies with any procedures as part of what legal process
Receiving a demand letter, filing a formal complaint, receiving a records subpoena, or experiencing an event that frequently leads to litigation are examples of situations that call for the preservation of evidence.
What procedures as part of legal hold process?It may also be referred to as a “hold order,” a “preservation order,” or a “legal hold.” It is a temporary suspension of an organization's electronic or paper document destruction procedures with regard to any documents that may be pertinent to a new or upcoming legal case, issued by the company's legal department.
Therefore, the expert fully complies with any procedures as part of legal process.
Learn more about legal here:
https://brainly.com/question/9929931
#SPJ1
what is the name of a device that is implemented for the sole purpose of luring attackers away from the real servers?
Decoy systems is the name of a device that is implemented for the sole purpose of luring attackers away from the real servers.
What exactly does "decoy system" mean?
Run certain reconnaissance tools that are known to be used to create a decoy host. compromise networked systems.
The meaning of entrapment may differ depending on the jurisdiction, but a basic definition states that someone is "entrapped" when they are coerced or convinced by the law.
What does FBS's decoy system do?
In order to sort dirty dishes quickly and efficiently so they may be loaded into the dishwasher without confusion or delay, restaurants use a dish decoy system.
Learn more about Decoy systems
brainly.com/question/14550655
#SPJ4
What are the effects of mobile phones on students?
The data available shows that having smartphones in the classroom has a negative impact on students' test scores and long-term memory.
How are smartphones harmful to children?Smartphones and other technological devices are most dangerous to children. They are exposed to smartphones since they are very young. They use these devices as they get older to play games, listen to music, and follow social media.
Smartphone content isn't always appropriate for kids. Additionally, not all parents watch their kids use their smartphones. Elders also find it convenient because it gives them more time to get their chores done while also keeping kids occupied.
They are unaware, though, that staring at screens for extended periods of time harms their children's eyes, brains, minds, and way of thinking.
Learn more about smartphones
https://brainly.com/question/25207559
#SPJ4
1. if default analytics tracking code is installed on pages with different domains, analytics will count these users and sessions separately. true false
if default analytics tracking code is installed on pages with different domains, analytics will count these users and sessions separately is True.
What happens when the same default tracking code is installed on pages with different domains?
Analytics will link a single domain to users' sessions. Analytics won't link users and sessions to any specific domain. Analytics will notify you if it collects duplicate data.The same default tracking code will count users and sessions individually if it is installed on pages with several domains.To gather visitor data and monitor the performance of your website, you must put the whole analytics tracking code snippet into the HTML of your web pages immediately after the opening head> element.To learn more about tracking code refer,
https://brainly.com/question/14318561
#SPJ4