Read the excerpt from The Building of Manhattan.

A temporary, small narrow-gauge track system was installed on each floor as it was needed. This enabled the material to be moved from the truck at ground level onto dump carts, raised by elevator to the designated floor, wheeled onto the track, and moved quickly to the exact spot needed. Turntables built into the track allowed the carts to be shifted about in any direction.

Which question can be answered only if an illustration accompanies the text?

What did turntables built into the track allow?
How were dump carts raised to designated floors?
When was a track system installed on a floor?
What does a turntable built into a track loo

Answer:

incompressible and expandable

[tex]\\ \sf{:}\Rrightarrow Q=mc\Delta T[/tex]

[tex]\\ \sf{:}\Rrightarrow Q=1(4184)(75)[/tex]

[tex]\\ \sf{:}\Rrightarrow Q=313800J[/tex]

[tex]\\ \sf{:}\Rrightarrow Q=313.8KJ[/tex]

Answer:

No.

Explanation:

In the question, no mathematical angle is shown.

Average velocity is defined as the ratio in change in position to change in time,

v[ave] = ∆x/∆t

which on its own doesn't have anything to do with acceleration.

If acceleration is constant, the average velocity is the literal average of the initial and final velocities,

v[ave] = (v[final] + v[initial]) / 2

If this constant acceleration has magnitude a, the final velocity can be expressed in terms of the initial velocity by

v[final] = v[initial] + a*t

and plugging this into the previous equation gives

v[ave] = (v[initial] + a*t + v[initial])/2

v[ave] = v[initial] + 1/2*a*t

If the body in consideration is initially at rest, then

v[ave] = 1/2*a*t

which might be the relation you're looking for. But bear in mind the conditions I've underlined.

If acceleration is not constant and changes over time, so that the acceleration is some function of time a(t), then you can determine the velocity function v(t) by using the fundamental theorem of calculus. You need to know a particular velocity for some time to completely characterize v(t), though. For example, if you're given the initial velocity v[initial] = v(0), then

[tex]\displaystyle v(t) = v(0) + \int_0^t a(u) \, du[/tex]

or if you know any other velocity for some time t₀ > 0,

[tex]\displaystyle v(t) = v(t_0) + \int_{t_0}^t a(u) \, du[/tex]

Answer:

The first one.

If the road becomes wet or crowded, you should ___ slow down and increase your following distance_

The safe distance between vehicles traveling in column specified by the command in light of safety requirements

The slower speed will help you save gas and avoid potential accidents. You can easily eliminate chances of rear end collision by maintaining a safe distance between your car and the vehicles ahead.

hence , a) slow down and increase your following distance is a correct option

learn more about safe distance

https://brainly.com/question/4144073?referrer=searchResults

#SPJ2

When NaOH is added to water, it separates into Na+ and OH-. The hydroxyls make it more basic.

A basic solution is an aqueous solution containing more OH⁻ ions than H⁺ ions.

When NaOH as a solute is mixed into the solvent like water, it separates NaOH into Na+ and OH-. The sodium ions Na⁺ have little effect on the solution, but the hydroxyls OH⁻ ions makes the solution more basic.

Thus, NaOH form a basic solution by the presence of OH⁻ ions  into it.

Learn more about basic solution.

https://brainly.com/question/3595168

#SPJ2

Answer:

first negative and then positve

Answer:

mountains are limited in their theoretical height by several processes. First is isostasy: the bigger a mountain gets, the more it weighs down its tectonic plate, so it sinks lower. ... Bottom line: mountains can get taller than Mount Everest in earth gravity, like the Appalachians probably did—but not much taller.

Answer:

It probably won't get any taller, though. From a geological standpoint, the Appalachians haven't seen much growth in quite a while. Since the dawn of the dinosaurs about 225 million years ago, this range has been getting whittled down by weathering forces.

Explanation:

Using Newton's second law

[tex]\\ \sf\Rrightarrow F=ma[/tex]

[tex]\\ \sf\Rrightarrow 300=2m[/tex]

[tex]\\ \sf\Rrightarrow m=150kg[/tex]

Hey there!

The formula of “mass” in physics is:

m = F/a

Whereas “f” is ‘force’, “a” is ‘acceleration’, & “m” is your ‘mass’ of course.

mass = 300 Net force/2 acceleration

300 Net force/2 acceleration = m

mass = 150

Therefore, your answer is: 150 kg

Good luck on your assignment and enjoy your day!

~Amphitrite1040:)

Answer:

C or 3

Explanation:

A: no they are called sources of sound. A is incorrect.

B: It does. Many people attest to this. But this is not a property of physics.

C: A media is required is the correct answer.

D: Dogs might. In general we don't.

I would pick C

Answer:

V = 4/3 R^3

V2 / V1 = (R2 / R1)^3 = 2^3 = 8

8.00

The volume of water in the larger balloon is 8 times greater than in the smaller balloon

We'll begin by calculating the volume of each balloon.

V = 4/3 πr³

V = 4/3 × 3.14 × 3³

V = 4/3 πr³

V = 4/3 × 3.14 × 6³

Finally, we shall determine how much greater the larger balloon is to the smaller balloon

Greatness => large / small

Large / small = 904.32 / 113.04

Large / small = 8

Cross multiply

Therefore, the larger balloon is 8 times greater than the smaller balloon.

Learn more on volume of sphere: https://brainly.com/question/9178703

flat disk like shape

________________

o0o0o0o0o0o0o0o0

Answer:

So correct sentence is:

So correct sentence is:

So correct sentence is:

So correct sentence is:

Answer:

The answer is 9.4 m/s

Explanation:

Because you add 5.0 + 4.5= 9.4

Answer:

Image result for what does and does not impact magnetic force?

The magnitude of the magnetic force between them depends on how much charge is in how much motion in each of the two objects and how far apart they are. The direction of the force depends on the relative directions of motion of the charge in each case

Explanation:

The factors that affect magnetic force are magnitude of the charge, speed, magnetic field and inclination of the field.

The magnetic force on a charged particle moving in a magnetic field is determined using the following formula;

F = qvBsin(θ)

where;

Thus, the factors that affect magnetic force are magnitude of the charge, speed, magnetic field and inclination of the field.

Learn more about magnetic force here: https://brainly.com/question/13277365

Start from the top and go 7 down then go to the right 9 times and there you should fine the letter "one"

If an experiment is conducted such that an applied force is exerted on an object, a student could use the graph to determine the net work done on the object.

The  graph of the net force exerted on the object as a function of the object’s distance traveled is attached below.

For more information on work done, visit

https://brainly.com/subject/physics

Answer:

D. There is not enough information that is known or can be obtained from the graph to determine the net work done on the object.

Explanation:

it’s the answer For Ap classroom

Answer:

What do you mean? Can you please explain yourself better?

Answer: answer is c rest of explanation is in the comments

Answer:

A perfectly elastic collision conserves momentum and kinetic energy..

This question involves the concepts of the law of conservation of energy and kinetic energy.

The variables required for a computational model that predicts change in the energy of a falling object are "B.)Height, speed, mass".

According to the law of conservation of energy the change in energy can be given in the following form for a falling object:

Loss in Potential Energy = Gain in Kinetic Energy

[tex]mgh = \frac{1}{2}mv^2[/tex]

It is clear from the formula that the variables involved in the computational model are mass, height, and velocity.

Learn more about the law of conservation of energy hee:

brainly.com/question/381281?referrer=searchResults

Answer:

b) height, speed, mass

Explanation:

just took the test

Answer:

Colder.

When the temperature is high, the air in your tires takes up more volume, where as when the temperature is cold, the air takes up less volume.

The air in your tires expands more in hot weather and contracts more in cold weather, depending on the temperature.

A temperature is a unit of hotness or coldness that can be described in terms of a variety of arbitrary scales. It also indicates the direction in which heat energy will naturally flow, i.e., from a hotter body to something like a colder body.

Heat is not the same as the power of a heat engine; for instance, an iceberg has a considerably higher temp than a blazing match, but it has a far larger total thermal energy than a match.

As opposed to extensive qualities like mass or volume, which are reliant on the amount of stuff being studied, the temperature is indeed an intensive attribute, just like pressure and density.

When the temperature will decrease then the molecules get compact or come close to each other due to which the reduction in the volume will take place.

To know more about Temperature:

https://brainly.com/question/11464844

#SPJ2

Hi there!

We can use the same equation for Gravitational Force:

[tex]\large\boxed{F_g = G\frac{m_1m_2}{r^2}}[/tex]

Fg = force due to gravity (N)

G = gravitational constant

m1,m2 = masses of objects (kg)

r = distance between objects (m)

Plug in the values provided:

[tex]F_g = (6.67*10^{-11})\frac{(2500)(3000)}{8^2} = \large\boxed{7.814 * 10^{-6}N }[/tex]

[tex]\huge\bf\underline{\underline{\pink{A}\orange{N}\blue{S}\green{W}\red{E}\purple{R:-}}}[/tex]

Here we've been given,

We have to find the gravitational attraction force (Fg) = ?

The standard formula to solve is given by,

[tex]:\implies\tt{F_g = g \frac{m_1m_2}{ {r}^{2} } } [/tex]

[tex]:\implies\tt{F_g = 6.67 \times {10}^{ - 11} \times \frac{(2500 )(3000)}{ {8}^{2} } }[/tex]

[tex]:\implies\tt{F_g = 6.67 \times {10}^{ - 11} \times \frac{7500000}{64} }[/tex]

[tex]:\implies\tt{F_g = 7.814 \times {10}^{ - 6} }[/tex]

Answer:

When a person runs, their body must convert potential energy into kinetic energy. Potential energy is the energy stored within a system.When a person runs, their body must convert potential energy into kinetic energy. Potential energy is the energy stored within a system. Potential energy is used when the system uses kinetic energy to move in a horizontal direction.

In the human body, potential energy is stored in the form of chemical energy. The chemical energy comes from the food that a person consumes throughout the day. The body needs a certain amount of calories (the energy from food) in order to perform certain activities. If the runner has not consumed enough calories throughout their day, they will run out of potential energy and become tired. This is because the body is not very efficient at retaining energy. Energy cannot be created or destroyed, but it can go elsewhere. As the person runs, most of their stored energy is released in the form of thermal energy. This is why people get hot and start to sweat when they do physical activity such as running. The body is heating up because it is literally burning the calories that it has consumed in order to keep moving in a horizontal direction. The runner will sweat, because sweating is the body's natural cooling mechanism. If the runner did not have the ability to sweat, the conversion of potential energy (the chemical energy) into kinetic energy which is released as thermal energy would cause the runner's body to overheat. The chemical energy that the runner consumes in the form of calories is also released in the form of sound energy. Every time the runner's foot hits the ground, energy is leaving the runner's body as sound waves emit from the impact of the runner's foot on the ground. Because energy is being released from the runner's body with every step they take, it is important for the runner to consume enough chemical energy in the form of calories prior to their run. The runner's body needs a substantial amount of calories as a reserve so that they will have more to burn as their potential energy is released throughout the run.

Thermal energy is measured in calories. Calories are released from a given item as it burns. The amount of calories that are in something depends directly on the amount of chemical bonds that are broken and formed as it burns. For example, when a piece of wood burns, 3000 calories of thermal energy are released per gram. When an apple is burned however, it releases about 600 calories of thermal energy. Therefore, it is reasonable to assume that there is more energy available from breaking the atomic bonds in wood than from breaking the atomic bonds in an apple.

One calorie is defined as the amount of thermal energy needed to raise the temperature of one gram of water one degree Celsius. Calories burn very slowly in the human body, and as they do, kinetic energy becomes available to the runner. 1 calorie is the equivalent to 4.186 Joules of energy. So, the more calories that the runner consumes prior to running, the more energy they will have available to them throughout the run. The runner�s energy can also be measured in the form of watts, or electrical power. One calorie also translates to about 4.186 watts. So, if the runner has 500 calories available to them, they are capable of producing over 2000 watts of electrical power.Kinetic energy is equal to one half of the runner's mass times their velocity squared (KE=1/2mv^2). So, if the runner has a mass of 60 kg and wants to run at a rate of 9m/s, they will use about 2,430 Joules of energy. The runner is not able to change their mass, but they can increase or decrease their use of kinetic energy by increasing or decreasing their velocity. If the runner has not consumed a lot of chemical energy throughout their day, it would be wise for them to decrease their velocity as to decrease their kinetic energy and therefore use less of their stored potential energy.

Answer:

20 meters/sec

Explanation:

See attachment.

2m/s^2 = (v - 0)/10s

v = 20 m/s