Round to the nearest whole number.

Bonnie has to drive 15 miles west and 12 miles north to get to her gym. A new road is being built that would allow her a direct route to her gym. About how many fewer miles will Bonnie travel to the gym and back home once the new road is built?​

In a matrix, the row space represents the set of all possible linear combinations of its row vectors. Since A is a 5 x 3 matrix, it can have at most 3 linearly independent row vectors. The maximum possible dimension of the row space of A is 3.

a) The maximum possible dimension of the row space of matrix A is 3. The row space of a matrix is defined as the vector space spanned by its row vectors. Since A is a 5 x 3 matrix, it can have at most 3 linearly independent row vectors. Any additional row vectors would be linearly dependent on the previous ones. Therefore, the maximum possible dimension of the row space of A is 3.

b) If the solution space of the homogeneous linear system Ax = 0 has one free variable, then the dimension of the column space of A is equal to the number of columns in A minus the number of pivot columns. The pivot columns are the columns of A that correspond to the leading entries in the row echelon form of A.

Since A is a 5 x 3 matrix, it has 3 columns. If the homogeneous system Ax = 0 has one free variable, it means that there are two pivot columns, resulting in a dimension of the column space of A equal to 3 - 2 = 1. This means that the column space of A is one-dimensional and can be spanned by a single vector.

The maximum possible dimension of the row space of a 5 x 3 matrix A is 3. If the homogeneous linear system Ax = 0 has one free variable, the dimension of the column space of A is 1.

In a matrix, the row space represents the set of all possible linear combinations of its row vectors. Since A is a 5 x 3 matrix, it can have at most 3 linearly independent row vectors. Adding more row vectors would introduce redundancy and not increase the dimension of the row space beyond 3.

The dimension of the column space of a matrix is equal to the number of linearly independent columns. In the case of the homogeneous system Ax = 0, the column space represents the set of all possible linear combinations of the columns that result in the zero vector. If there is one free variable in the system, it means that there are two pivot columns, resulting in a dimension of the column space of 1.

To find the basis for the solution space of the homogeneous system given by the equations X1 - 4x2 + 3x3 - X4 = 0 and 2x1 - 8x2 + 6x3 - 2x4 = 0, we can put the augmented matrix [A | 0] in row echelon form and identify the pivot and free variables.

By performing row operations, we can transform the augmented matrix into row echelon form:

1 -4 3 -1 | 0

0 0 0 0 | 0

From the row echelon form, we can see that the first and third columns correspond to the pivot variables (X1 and X3), while the second and fourth columns correspond to the free variables (X2 and X4).

To find the basis for the solution space, we set the free variables to 1 and the pivot variables to zero, one at a time. By doing so, we obtain the following vectors:

For X2 = 1 and X4 = 0: [4, 1, 0, 0]

For X2 = 0 and X4 = 1: [-3, 0, 1, 1]

These two vectors form a basis for the solution space of the homogeneous system. The dimension of the solution space is 2, as we have two linearly independent vectors.

Learn more about linear here:

https://brainly.com/question/31510526

#SPJ11

Answer:

(0,0) is a saddle point

(-1,-3) is a local maximum

Step-by-step explanation:

Find critical points

[tex]f(x,y)=6x^3-y^2+6xy+2\\\\\frac{\partial f}{\partial x}=18x^2+6y\rightarrow18x^2+6y=0\\\\\frac{\partial f}{\partial y}=-2y+6x\rightarrow6x-2y=0[/tex]

[tex]6x-2y=0\\3x=y[/tex]

[tex]18x^2+6y=0\\18x^2+6(3x)=0\\18x^2+18x=0\\x^2+x=0\\x(x+1)=0\\x=0,-1[/tex]

Therefore, the critical points are [tex](0,0)[/tex] and [tex](-1,-3)[/tex].

Determine value of Hessian Matrix at critical points

[tex]H=\bigr(\frac{\partial^2 f}{\partial x^2}\bigr)\bigr(\frac{\partial^2 f}{\partial y^2}\bigr)-\bigr(\frac{\partial^2 f}{\partial x \partial y}\bigr)^2\\\\H=(36x)(-2)-6^2\\\\H=-72x-36[/tex]

For (0,0):

[tex]H=-72(0)-36=-36 < 0[/tex], so (0,0) is a saddle point

For (-1,-3):

[tex]H=-72(-1)-36=72-36=36 > 0[/tex], so (-1,-3) is either a local maximum or minimum. Since [tex]\frac{\partial^2 f}{\partial x^2}=36x=36(-1)=-36 < 0[/tex], then (-1,-3) is a local maximum.

[tex]A[/tex] - picking the N

[tex]|\Omega|=8\\|A|=1\\\\P(A)=\dfrac{1}{8}=12.5\%[/tex]

The probability that inspection of machines finds no violation is 17/20 and the probability that plan above will find 2 violations is 190.

Management suspects that some of the machines are in violation of accepted standards of the product, 20 machines are under suspicion but all cannot be inspected. Suppose that 3 of the machines are in violation.The probability that inspection of machines finds no violation:

Let the probability of finding no violation be P(A)P(A) = Probability of finding no violation= 1- Probability of finding violationP(B) = Probability of finding a violation= 3/20P(A) = 1 - 3/20P(A) = 17/20The probability that the plan above will find 2 violations: Let the probability of finding two violations be P(C)We need to select two machines from 3 defective machines and 17 non-defective machines.P(C) = 20C2/3C2 × 17C0P(C) = 20 × 19/2 × 1 × 1P(C) = 190Therefore, the probability that inspection of machines finds no violation is 17/20 and the probability that plan above will find 2 violations is 190.

Learn more about  probability here:

https://brainly.com/question/31828911

#SPJ11

To convert the point (0, 1) from rectangular coordinates to polar coordinates, we need to express the point in the form (r, θ), where r represents the distance from the origin and θ represents the angle from the positive x-axis.

In rectangular coordinates, the given point is (0, 1), which lies on the positive y-axis. To convert this point to polar coordinates, we need to find the corresponding values of r and θ.
The distance from the origin to the point (0, 1) is 1, which represents the value of r in polar coordinates.Since the point lies on the positive y-axis, the angle from the positive x-axis to the line connecting the origin and the point is 90 degrees or π/2 radians. Therefore, θ = π/2.
Thus, the polar coordinates of the point (0, 1) are (1, π/2).

learn more about polar coordinates here

https://brainly.com/question/31904915



#SPJ11

From two pints (4 cups) of milk, you can make 12 servings.

To find the number of servings that can be made from two pints of milk, we first need to convert the given measurements into cups.

Given that 1 pint is equal to 2 cups, we can determine that two pints would be 2 pints * 2 cups/pint = 4 cups of milk.

The recipe states that 3 cups of milk are required to make 9 servings. This implies that each serving needs 3 cups / 9 servings = 1/3 cup of milk.

To determine the number of servings that can be made from 4 cups of milk, we divide the total amount of milk by the amount of milk required per serving:

4 cups / (1/3 cup per serving) = 4 cups * (3/1) = 12 servings.

For more questions on pints

https://brainly.com/question/27434208

#SPJ8

The probability of exactly two students being mature in a random sample of five students from the enrollment register can be calculated using the binomial probability formula. Since 22% of the students are mature, the probability of selecting a mature student is 0.22, and the probability of selecting a non-mature student is 0.78.

a) To calculate the probability of exactly two students being mature, we use the binomial probability formula:

P(exactly 2 mature students) = C(5, 2) * (0.22)^2 * (0.78)^3

To calculate C(5, 2), we use the combination formula:

C(n, r) = n! / (r!(n-r)!)

C(5, 2) = 5! / (2!(5-2)!)

       = 5! / (2!  3!)

       = (5 * 4 * 3!) / (2! * 3!)

       = (5 * 4) / 2

       = 20 / 2

       = 10

Now we can substitute the values into the expression:

C(5, 2) * (0.22)^2 * (0.78)^3

= 10 * (0.22)^2 * (0.78)^3

= 10 * 0.0484 * 0.474552

= 0.22950176

Therefore,  the probability that exactly two students are mature in Random sample of 5 is approximately 0.22950176

Where C(5, 2) represents the number of combinations of selecting 2 students out of 5. Evaluating this expression will give us the probability.

b) Similarly, for a random sample of seven students, we use the same formula:

P(exactly 2 mature students) = C(7, 2) * (0.22)^2 * (0.78)^5

To calculate C(7, 2), we use the combination formula:

C(n, r) = n! / (r!(n-r)!)

C(7, 2) = 7! / (2!(7-2)!)

       = 7! / (2!5!)

       = (7 * 6 * 5!) / (2! * 5!)

       = (7 * 6) / 2

       = 42 / 2

       = 21

Now we can substitute the values into the expression:

C(7, 2) * (0.22)^2 * (0.78)^5

= 21 * (0.22)^2 * (0.78)^5

= 21 * 0.0484 * 0.2887

≈ 0.2927

Therefore,  the probability that exactly two students are mature in a random sample of 7 is approximately 0.2927

learn more about binomial probability formula here:

https://brainly.com/question/30764478

#SPJ11

This formula calculates the lower limit for the mean at the 90% confidence level. It subtracts the product of the score (B7) and the standard error of the mean from the sample mean.

To find the score from the appropriate probability table to construct a 90% confidence interval, you can use the T.INV.2T function in Excel.

Assuming you want to calculate the confidence interval for the shipment time data provided, follow these steps:

1. In cell B7, enter the formula:

  ```

  =T.INV.2T(1-0.1, COUNT(A2:A89)-1)

  ```

  This formula calculates the score corresponding to a 90% confidence level using the T.INV.2T function. The first argument is `1-0.1` because we subtract the confidence level from 1 to get the significance level (0.1). The second argument is `COUNT(A2:A89)-1` to calculate the degrees of freedom, which is the count of data points minus 1.

2. In cell B9, enter the formula:

  ```

  =AVERAGE(A2:A89) + (B7 * (STDEV(A2:A89)/SQRT(COUNT(A2:A89))))

  ```

  This formula calculates the upper limit for the mean at the 90% confidence level. It adds the product of the score (B7) and the standard error of the mean to the sample mean. The standard error is calculated by dividing the standard deviation by the square root of the sample size.

3. In cell B10, enter the formula:

  ```

  =AVERAGE(A2:A89) - (B7 * (STDEV(A2:A89)/SQRT(COUNT(A2:A89))))

  ```

  This formula calculates the lower limit for the mean at the 90% confidence level. It subtracts the product of the score (B7) and the standard error of the mean from the sample mean.

Based on the values in cell B9 and B10, you can be 90% confident that the true mean shipment time falls within the calculated confidence interval.

Note: Make sure to adjust the cell references in the formulas based on the actual location of your data in the spreadsheet.

Visit here to learn more about mean brainly.com/question/31101410

#SPJ11

Given: The probability of event A is Pr(A) = 1/3. The probability of the union of event A and event B, namely AUB, is Pr(AUB) = 5/6. Suppose that event A and event B are independent. The probability of event B is Pr(B) = 3/4.

To find Pr(B).

Explanation: We know that, Pr(A U B) = Pr(A) + Pr(B) - Pr(A ∩ B).

As events A and B are independent,

Pr(A ∩ B) = Pr(A) × Pr(B)

Pr(A U B) = Pr(A) + Pr(B) - Pr(A) × Pr(B)

Apply Pr(A) = 1/3 and Pr(AUB) = 5/6 in the above formula as shown below.

5/6 = 1/3 + Pr(B) - (1/3) × Pr(B)

5/6 - 1/3 = Pr(B) - (1/3) × Pr(B)

Pr(B) [1 - (1/3)] = (5/6) - (1/3) × (5/6)

Pr(B) [2/3] = (5/6) - (5/18)

Pr(B) = (5/6) × (9/10)

Pr(B) = 3/4

Hence, the probability of event B is Pr(B) = 3/4.

To know more about probability, visit:

https://brainly.com/question/30669966

#SPJ11

Given AC² = (DC) We have to the term that completes the given equation is CD.

In order to complete the given equation, we must use the formula for the distance between two points in a coordinate plane.

The formula is: d = √(x₂ - x₁)² + (y₂ - y₁)²

Where x₁ and y₁ represent the coordinates of the first point and x₂ and y₂ represent the coordinates of the second point.

So, we can write the distance formula for the given line segment AD as AD = √[(D-C)² + A²]

To complete the equation AC² = (DC)(?),

we must use the Pythagorean theorem to find the value of AC.

According to the Pythagorean theorem, in a right triangle, the sum of the squares of the lengths of the legs is equal to the square of the length of the hypotenuse.

So, we can write:

AC² = AD² + CD²

Substituting the value of AD, we get:

AC² = [(D-C)² + A²] + CD²AC²

      = (D-C)² + A² + CD²

So, the term that completes the equation is CD.

To know more about coordinates, visit:

https://brainly.com/question/22261383

#SPJ11

The correct answer is: None of the mentioned.

We can start by calculating the matrix product of (5 2) and (2 6):

(5*2).(2*6) = (5*2 + 2*6) (5*6 + 2*2)

= (14 34)

We then multiply this result by a scalar "a" to get the matrix M:

M = a (14 34)

= (14a 34a)

Since M is a set of matrices in [tex]M_{2*2}[/tex], we can write it as a linear combination of the standard basis matrices:

M = x1 * (1 0) + x2 * (0 1) + x3 * (0 0) + x4 * (0 0)

+ x5 * (0 0) + x6 * (0 0) + x7 * (0 0) + x8 * (0 0)

where xi are scalars and the standard basis matrices are:

(1 0) (0 0) (0 1) (0 0)

(0 0) (1 0) (0 0) (0 1)

Since M is linearly dependent, there exist scalars not all zero such that:

x1 * (1 0) + x2 * (0 1) + x3 * (0 0) + x4 * (0 0)

x5 * (0 0) + x6 * (0 0) + x7 * (0 0) + x8 * (0 0) = 0

This implies that x1 = x2 = 0 and x3 = x4 = x5 = x6 = x7 = x8 = 0, since the standard basis matrices are linearly independent.

Therefore, the matrix M can only be linearly dependent if M = 0, which implies that a = 0 or (14a 34a) = (0 0). The first case gives us M = 0, which is linearly dependent. However, the second case leads to a = 0, which means that M = 0 and is also linearly dependent.

In conclusion, we have shown that M is always linearly dependent, regardless of the value of m. The correct answer is: None of the mentioned.

Learn more about Matrix : https://brainly.com/question/27929071

#SPJ11

Probability of an event is the measure of the likelihood that the event will occur. It is a number between 0 and 1, where 0 means the event will not occur and 1 means the event will occur.

[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]

♥️ [tex]\large{\textcolor{red}{\underline{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]

Probability is a measure of the likelihood or chance that a particular event will occur. It is a numerical value between 0 and 1, where 0 represents an impossible event and 1 represents a certain or guaranteed event.

In probability theory, the probability of event A is denoted as P(A) and is calculated by dividing the number of favorable outcomes for event A by the total number of possible outcomes in the sample space.

The probability formula is:

P(A) = Number of favorable outcomes / Total number of possible outcomes

Probability can also be expressed as a fraction, decimal, or percentage.

For example, if you have a standard six-sided die and you want to calculate the probability of rolling a 4, there is only one favorable outcome (rolling a 4) out of six possible outcomes (numbers 1 to 6). Therefore, the probability of hitting a 4 is 1/6 or approximately 0.1667 (16.67%).

Probability allows us to quantify uncertainty and make predictions based on the likelihood of different outcomes. It is a fundamental concept in various fields such as mathematics, statistics, physics, economics, and more.

The probability that one of the books chosen is the tallest book on the shelf is 0.25.
The data given in this question is,

Total number of books = 12

There is a 0.25 percent chance that one of the selected books is the tallest one on the shelf.

Given: Total number of books = 12

Therefore, n(S) = C(12,3)

= 220

Now, there is only one tallest book on the shelf.

So, only 1 book is favorable here.

Therefore, n(E) = C(1,1) × C(11,2)

= 55

So, the required probability P(E) = n(E) / n(S)

= 55/220

= 0.25

Therefore, the probability that one of the books chosen is the tallest book on the shelf is 0.25.

To know more about probability, visit:

https://brainly.com/question/13604758

#SPJ11

The area of the region bounded by the parabola[tex]x = -y^2[/tex] and the line [tex]y = x + 2[/tex] can be calculated by finding the points of intersection between the parabola and the line, The area of the region is 0 square units.

To find the area of the region bounded by the parabola[tex]x = -y^2[/tex]and the line [tex]y = x + 2[/tex], we first need to determine the points of intersection between the two curves.

Setting [tex]x = -y^2[/tex] equal to [tex]y = x + 2[/tex], we can solve for the values of y that satisfy both equations. Substituting [tex]x = -y^2[/tex] into [tex]y = x + 2[/tex], we have [tex]-y^2 = y[/tex] + 2. Rearranging the equation, we get [tex]y^2 + y + 2 = 0.[/tex] However, this quadratic equation does not have any real solutions, which means that the parabola and the line do not intersect in the real plane.

Since the two curves do not intersect, there is no enclosed region, and therefore, the area of the region bounded by the parabola and the line is 0 square units.

Learn more about region here:

https://brainly.com/question/31970699

#SPJ11

The sum of the two greatest numbers in the set is 80 - (27 + smallest number in the set).

Given that the set of five numbers has a median of 15, a range of 10, a mode of 12, and a mean of 16.The median of the set is 15. So, the third number in the set is 15.

We know that the range of a set of numbers is the difference between the largest and smallest numbers in the set.

Here, the range of the set is 10, therefore the largest number in the set can be obtained as follows:

Largest number in the set = Median + Range/2 = 15 + 10/2= 20

We also know that the mode of the set is 12, so one of the five numbers in the set is 12.

Since the mean of the set is 16, we can find the sum of all 5 numbers by the following method:

Mean of the set = Sum of all 5 numbers/5

=> Sum of all 5 numbers = Mean of the set × 5

=> Sum of all 5 numbers = 16 × 5= 80

Now, we can find the sum of the two greatest numbers in the set by subtracting the smallest 3 numbers from the sum of all 5 numbers. We know that one of the five numbers in the set is 12 and the third number in the set is 15.

Therefore, the sum of the two greatest numbers in the set is obtained as follows:

Sum of the two greatest numbers in the set = Sum of all 5 numbers - Sum of smallest 3 numbers = 80 - (12 + 15 + smallest number in the set) = 80 - (27 + smallest number in the set).

Therefore, the sum of the two greatest numbers in the set is 80 - (27 + smallest number in the set).

To know more about mode, visit the link : https://brainly.com/question/14532771

#SPJ11

The area of region R is √3 - 1 units squared.

To find the area of the region R bounded by the parabola y = 4 - x[tex]^2[/tex] and the line y = 1 in the first quadrant, we need to determine the points where these two curves intersect.

Setting y = 4 - x[tex]^2[/tex]equal to y = 1, we have:

4 - x[tex]^2[/tex] = 1

Rearranging the equation, we get:

x[tex]^2[/tex] = 3

Taking the square root of both sides, we have:

x = ±√3

Since we are considering the first quadrant, we take the positive square root: x = √3.

To calculate the area of R, we integrate the difference between the upper and lower functions with respect to x over the interval [0, √3].

Area = ∫[0,√3] (4 - x^2 - 1) dx

Simplifying the integrand:

Area = ∫[0,√3] (3 - x^2) dx

Integrating:

Area = [3x - (x^3)/3] evaluated from 0 to √3

Plugging in the limits:

Area = [(3√3 - (√3)^3)/3] - [(3(0) - (0^3))/3]

Area = [3√3 - 3]/3

Area = √3 - 1

Therefore, the area of region R is √3 - 1 units squared.

So the correct option is: √3 units squared.

Learn more about parabola

brainly.com/question/11911877

#SPJ11

Certainly! Here is a tree diagram that models the random process of selecting one 2015 Spotify user and recording their age and favorite genre (pop or non-pop).

           User Selected

             /        \

            /          \

           /            \

          /              \

    Age Recorded     Genre Recorded

      /    \           /       \

     /      \         /         \

 Pop        Non-Pop   Pop      Non-Pop

In this tree diagram, the first branch represents the selection of a user, and the second branch represents the recording of their age. The third branch represents the recording of their favorite genre, with one branch for the genre being pop and another branch for the genre being non-pop.

This tree diagram illustrates the different possibilities and outcomes that can occur when selecting a 2015 Spotify user and recording their age and favorite genre.

To know more about tree diagrams:- https://brainly.com/question/27143326

#SPJ11

To be able to test the claim it implies that  the mean blood glucose level of senior citizens is higher than 100 mg/dL at the 0.05 level of significance, so, one can carry out a one-sample t-test.

The steps to conduct the test are:

So, Rejecting the null hypothesis implies that there is ample evidence to back the argument that senior citizens' average blood glucose level is higher than 100 mg/dL. If we do not reject the null hypothesis, we cannot definitively say that the average blood glucose level is higher than 100 mg/dL.

Learn more about one-sample t-test. from

https://brainly.com/question/29583516

#SPJ4

The taxable income for Adela and James is $582,856.

Earnings of Adela last year = $48,500

Earnings of James last year = $549,706

Taxable income can be calculated as follows:

Total Wages of James and Adela

= $48,500 + $549,706 = $598,206

The Additional tax information for the year is follows:

Deductions: Interest earned: $1,200, state and local income taxes paid: $4,200, mortgage interest: $5,200, contributions to charity: $1,400, contributions to retirement plans: $3,350

Total Deductions = $15,350

Taxable income = $598,206 - $15,350 = $582,856

Therefore, the taxable income for Adela and James is $582,856.

#SPJ11

Let us know more about taxable income:https://brainly.com/question/17082686.

The real interest rate is determined by the Taylor Rule equation, which takes into account the deviation of output from potential and the deviation of inflation from the target rate.

The Taylor Rule is an economic guideline that suggests how central banks, such as the Federal Reserve, should adjust their policy interest rates in response to changes in economic conditions. It provides a framework for setting the real interest rate based on two main factors: the output gap and inflation.

The output gap represents the difference between actual output and potential output. In this case, there is an expansionary gap of 2 percent, indicating that the actual output is 2 percent above the potential output.

The Taylor Rule equation is typically expressed as follows:

Real Interest Rate = Neutral Rate + (1.5 * Output Gap) + (0.5 * Inflation Gap),

where the neutral rate is the rate that would be appropriate when the economy is at full potential, and the inflation gap is the difference between actual inflation and the target inflation rate.

Given an expansionary gap of 2 percent and inflation of 3 percent, we can substitute these values into the Taylor Rule equation to calculate the real interest rate. However, the specific values for the neutral rate and target inflation rate are not provided in the given information, so we cannot determine the exact real interest rate without that additional information.

In conclusion, without knowing the specific values for the neutral rate and target inflation rate, we cannot determine the exact real interest rate that the Fed would set based on the given information. The Taylor Rule provides a framework for policy decisions, but the actual values used in the calculation would depend on the specific economic conditions and central bank's preferences.

Learn more about interest here:

https://brainly.com/question/30955042

#SPJ11

Given that the total amount of money that Browning Investments has to invest is $4,400,000 and is divided into three categories: International stocks return 15% on their investment, standard stocks return 12%, and bonds return 8%.

Let's assume that the company has invested x dollars in international stocks.

Therefore, the investment in bonds is 3x dollars as it desires to have three times as much invested in bonds as it does in international stocks.

Since the total investment is $4,400,000, the amount invested in standard stocks is:$4,400,000 - x - 3x = $4,400,000 - 4xNow, the company earned $252,000 last year.

We know that the amount of return from International stocks is 15%, the return from standard stocks is 12%, and the return from bonds is 8%.Therefore, the return earned from International stocks is 0.15x, the return earned from standard stocks is 0.12($4,400,000 - 4x), and the return earned from bonds is 0.08(3x).The equation for total returns is:0.15x + 0.12($4,400,000 - 4x) + 0.08(3x) = $252,000Now, solve for x to find the amount invested in international stocks.0.15x + 0.12($4,400,000 - 4x) + 0.08(3x) = $252,0000.15x + $528,000 - 0.48x + 0.24x = $252,000-0.09x + $528,000 = $252,000-0.09x = -$276,000x = $3,066,667Therefore, the amount invested in international stocks is $3,066,667.The amount invested in bonds is 3x = $3,066,667 × 3 = $9,200,000And the amount invested in standard stocks is:$4,400,000 - x - 3x = $4,400,000 - $3,066,667 - $9,200,000 = -$7,866,667

Thus, it's impossible for the company to have invested a negative amount of money in standard stocks. Therefore, the answer is that the company did not invest anything in standard stocks.

#SPJ11

Browning Investments has approximately $400,000 invested in international stocks, $1,200,000 invested in bonds, and $2,800,000 invested in standard stocks.

Let x be the amount invested in international stocks.

Then the amount invested in bonds is 3x.

The remaining investment is the amount invested in standard stocks.

Thus, the sum of all investments is

[tex]x + 3x + Sx = $4,400,000[/tex],

where Sx is the amount invested in standard stocks.

Simplifying this equation gives

[tex]4x + Sx = $4,400,000[/tex].

Now we need to use the fact that the company returned $252,000 last year.

This means that their total return was equal to the sum of the returns on each investment type, which we can express as follows:

[tex]0.15x + 0.12Sx + 0.08(3x) = $252,000[/tex]

Simplifying this equation gives [tex]0.39x + 0.12Sx = $252,000[/tex]

Now we have two equations with two unknowns:

[tex]4x + Sx = $4,400,0000[/tex]

[tex]39x + 0.12Sx = $252,000[/tex]

Solving this system of equations by substitution or elimination, we get:

x ≈ $400,000 (amount invested in international stocks)

3x ≈ $1,200,000 (amount invested in bonds)

Sx ≈ $2,800,000 (amount invested in standard stocks)

Therefore, Browning Investments has approximately $400,000 invested in international stocks, $1,200,000 invested in bonds, and $2,800,000 invested in standard stocks.

To know more about international stocks, visit:

https://brainly.com/question/32327487

#SPJ11

The cost of goods purchased is the sum of the beginning inventory and the cost of goods available for sale. (b) The cost of goods sold is the cost of goods available for sale minus the ending inventory.

To compute the cost of goods purchased, we need to add the beginning inventory to the purchases. In this case, the beginning inventory is given as $60,000 and the purchases are $380,000. Therefore, the cost of goods purchased is $440,000.

To calculate the cost of goods sold, we subtract the ending inventory from the cost of goods available for sale. The cost of goods available for sale is the sum of the beginning inventory and the purchases, which is $440,000. The ending inventory is given as $80,000. Therefore, the cost of goods sold is $360,000 ($440,000 - $80,000).

To prepare the income statement, we need to consider other relevant information such as sales revenue, operating expenses, and other income or expenses. Without the complete data, it is not possible to provide a detailed income statement for 2017. The income statement typically includes the following sections: sales revenue, cost of goods sold, gross profit, operating expenses, operating income, and net income.

To learn more about income statement

brainly.com/question/14890247

#SPJ11

6. The triangle is a scalene triangle

7. The coordinates of point J are e, d

8. Te soultion to the proportion is 28

6. To classify the triangle ABC as scalene, isosceles, or equilateral, we need to check the lengths of the sides. If all three sides are different lengths, it's a scalene. If two sides are the same length, it's an isosceles. If all three sides are the same length, it's an equilateral.

First, let's find the lengths of the sides (using the distance formula):

AB = sqrt((4 - (-1))^2 + (4 - 3)^2) = sqrt(25 + 1) = sqrt(26)

BC = sqrt((8 - 4)^2 + (1 - 4)^2) = sqrt(16 + 9) = sqrt(25) = 5

AC = sqrt((8 - (-1))^2 + (1 - 3)^2) = sqrt(81 + 4) = sqrt(85)

Since all sides have different lengths, triangle ABC is a scalene triangle.

In a rectangle, opposite sides are equal and the sides are perpendicular. Given that the vertices of rectangle HIJK are H(0,0), I(0,d), K(e,0), we know that point J must be located at (e,d) to create a rectangle.

For the proportion 4/9 = m/63, the solution can be found by cross multiplying and solving for m:

4 * 63 = 9 * m

252 = 9m

m = 252 / 9 = 28.

Read more on scalene triangle here:https://brainly.com/question/30765574

#SPJ1

The answer is  T₁ = a₁ = a₂ = a₃ = -1/4, and T₂ = b₁ = b₂ = b₃ = 5/4.

The given differential equation is 2x²y" - xy' + (2x + 1)y=0. Find two linearly independent solutions of the given differential equation. The general solution of the differential equation is Y = c₁y₁(x) + c₂y₂(x), where y₁(x) and y₂(x) are the linearly independent solutions, and c₁ and c₂ are arbitrary constants.To find the two linearly independent solutions of the given differential equation of the form Y₁ = x¹(1+ a₁x + a₂x² + 3x³ +...) Y₂ = x¹(1+b₁x + b₂x² +b3x³ + ...), where r₁ > 2, we will use the method of Frobenius. On substituting y = x^r(∑_(n=0)^∞▒〖a_nx^n) 〗in the differential equation and equating the coefficients of the same powers of x, we get the recurrence relation given by a_(n+2) =(n-r+1)/(n+2)(2n-2r+3)a_(n+1) +[(n-r+1)(n-r+2)/(n+2)(n+1)]a_n, with a₀ and a₁ being arbitrary constants.The two linearly independent solutions for r₁ = 3/2 are given by Y₁ = x^(3/2)(1 - x/4 + 3x²/32 + ...), and Y₂ = x^(3/2)(1 + 5x/4 + 35x²/32 + ...).

Know more about differential here:

https://brainly.com/question/31492438

#SPJ11

The standardized test statistic is 1.891, which is greater than the critical value of 2.998 for a one-tailed test at 7 degrees of freedom and α=0.01. Therefore, we reject the null hypothesis and conclude that the proportion of children from the low-income group that drew the nickel too large is greater than the proportion of the high-income group that drew the nickel too large.

Next, we explain how we obtained this answer using the given information, formulas, and calculations.

We conduct a test at the 0.1 significance level to compare the proportions of children from two groups who drew the nickel too large. We use LL to denote the low-income group and HH to denote the high-income group.

The null hypothesis H0 is that pL = pH, where pL and pH are the proportions of children from each group who drew the nickel too large.

The alternative hypothesis H1 is that pL > pH.

We use a t-distribution table to find the critical value for a one-tailed test with 7 degrees of freedom (sample size n-1=8-1=7). The critical value is t=2.998.

The rejection region is the right tail of the t-distribution, corresponding to t-values greater than 2.998.

We use the formula[tex]z = \frac{\bar{x}-\mu}{\frac{s}{\sqrt{n}}}[/tex] to find the standardized test statistic, where [tex]\bar{x}[/tex]is the sample mean,

μ is the population mean,

s is the sample standard deviation,

and n is the sample size.

We calculate the sample proportions of children from each group who drew the nickel too large using the given data: 24/40 = 0.6 for LL and

13/35 ≈ 0.371 for HH.

We calculate the pooled proportion using the formula

p = (xL + xH) / (nL + nH), where xL and xH

are the number of children from each group who drew

To know more about  proportion, Visit :

https://brainly.com/question/31548894

#SPJ11

The function ƒ(x) is integrable on [0, 1], and the value of the integral ∫ƒ(x) dx is equal to 1.

To determine if the function ƒ: [0, 1] → R is integrable and to find the value of the integral, we need to analyze the upper and lower sums.

Given that the upper sum Un = 1+ and lower sum Ln = 1/2n, we can compare their values as n approaches infinity.

(i) To find Ln as a function of n:

Ln = 1/2n

(ii) To find Un as a function of n:

Un = 1+

As n approaches infinity, Ln approaches 0, and Un approaches 1.

(iii) Now, let's calculate the integral of g(x) dx using the upper sum and lower sum:

∫g(x) dx = Lim(n→∞) Un

Since Un approaches 1 as n approaches infinity, the integral of g(x) dx is equal to 1.

Therefore, the function ƒ(x) is integrable on [0, 1], and the value of the integral ∫ƒ(x) dx is equal to 1.

Learn more about derivative here:

https://brainly.com/question/12047216

#SPJ11

The probability that a student had a GPA between 1 and 2 in the Math 256 class, assuming a rectangular density curve with equal height for each GPA value, is 1.

Since the grade distribution is a rectangular density curve with equal height for each GPA value, the probability of a student having a GPA between 1 and 2 can be calculated as the area under the curve between these two points.

The width of the rectangle representing each GPA value is 1 (from 1 to 2), and the height is the same for each GPA value. Therefore, the probability can be calculated as the width multiplied by the height of the rectangle.

Since the height is equal for each GPA value, it cancels out when calculating the probability.

Therefore, the probability of a student having a GPA between 1 and 2 is simply the width of the interval, which is 2 - 1 = 1.

Thus, the probability a student had a GPA between 1 and 2 is 1.

To know more about probability refer here:

https://brainly.com/question/14210034#

#SPJ11

The exact value of A in the general solution is 72

From the question, we have the following parameters that can be used in our computation:

y = A + C[tex]e^{-0.5x^2}[/tex]

The differential equation is given as

y' + xy = 72x

When y = A + C[tex]e^{-0.5x^2}[/tex] is differentiated, we have

[tex]y' = -Cxe^{-0.5x^2}[/tex]

So, we have

[tex]-Cxe^{-0.5x^2} + xy = 72x[/tex]

Recall that

y = A + C[tex]e^{-0.5x^2}[/tex]

So, we have

[tex]-Cxe^{-0.5x^2} + x(A + Ce^{-0.5x^2} = 72x[/tex]

Expand

[tex]-Cxe^{-0.5x^2} + Ax + xCe^{-0.5x^2} = 72x[/tex]

Evaluate the like terms

So, we have

Ax = 72x

Divide both sides of Ax = 72x by x

A = 72

Hence, the value of A in the general solution is 72 and B is

Read more about differential equation at

https://brainly.com/question/1164377

#SPJ4

The degree of precision of a quadrature formula whose error term is [tex]h^4/120 f^(5)(E)[/tex] is 4.

In the error term [tex]h^4/120 f^(5)(E)[/tex], the [tex]h^4[/tex] term indicates the order of accuracy, and [tex]f^(5)(E)[/tex] represents the fifth derivative of the function.

Since the error term involves [tex]h^4[/tex], it means that the quadrature formula can exactly integrate polynomials of degree 4 or lower. Therefore, the degree of precision of the quadrature formula is 4.

To know more about quadrature formula, refer here:

brainly.com/question/31475940

#SPJ4

By use the one-to-one property of logarithms the value of x is given by x = ± sqrt(ln (7/9) + 2).

In the logarithmic expression of this question, i.e., In (x² − 2) + ln (9) = ln (7),

We can use the one-to-one property of logarithms to solve it.

One-to-one property of logarithms:

If b > 0 and b ≠ 1, then logb M = logb N if and only if M = N.

First, move ln(9) to the other side of the equation by subtracting it from both sides.

In (x² − 2) = ln (7) - ln(9).2.

Use the logarithmic identity ln (M/N) = ln M − ln N. In (x² − 2) = ln (7/9).3.

Take the exponential of both sides of the equation.

e^(x²-2) = 7/9.4. Solve for x.

Take the natural logarithm of both sides of the equation.

ln (e^(x²-2)) = ln (7/9).5.

Use the power property of logarithms: ln (e^(x²-2)) = x^² - 2.

So, x² - 2 = ln (7/9).6.

Add 2 to both sides of the equation: x² = ln (7/9) + 2.7.

Take the square root of both sides of the equation: x = ± sqrt(ln (7/9) + 2).

Therefore, the value of x is given by x = ± sqrt(ln (7/9) + 2).

For more such questions on logarithmic expression, click on:

https://brainly.com/question/28041634

#SPJ8