sample of pure boron contains only isotope X and isotope Y.

A nucleus of X has more mass than a nucleus of Y.
[o[4].[4] The sample is ionised, producing ions each with a charge of +1.6 x 10°C.

The specific charge of an ion of X is 8.7 x 10°C kg".

Calculate the mass of an ton of X.

[1 mark]
h
mass of ion = kg

[4].[2] Determine the number of nucleons in a nucleus of X.
mass of a nucleon = 1.7 x 1077 kg
[2 marks]
h
number of nucleons =
[o[4].[3] Compare the nuclear compositions of X and Y.
[2 marks]
[o[4].[4] lons of Y have the same charge as ions of X.
State and explain how the specific charge of an ion of X compares with that of an
ion of Y.
[2 marks]

At 0 °C, combine 200 grams of ice with 1000 grams of liquid. The following relational models overall final composition of a mixture at 6.7 °C:

Atoms from various elements are chemically mixed in a predetermined ratio to form a compound. When there is no biochemical combination or reaction, two or more chemicals are combined to form a mixture. Different elements are found in compounds in fixed ratios organised in predetermined ways by chemical bonds.

A mixture is a chemical that has a varied composition, indicating that it is made up of different sorts of molecules or atoms. These might have intermolecular bonds or bonds among molecules, but these are far weaker than the bonds created when elements combine to form compounds.

To know more about composition of the mixture visit:

https://brainly.com/question/26835405

#SPJ4

Answer: 3 (c)

Explanation: The only force acting on the object is the force of gravity, mg, which acts straight downward. Even though the object has horizontal velocity, there is no horizontal force after the object is done being thrown.

the refrigeration capability, in tons, is 4.905 tons, the coefficient of performance, in kW, is 4.17 KW, and the compressor power, in kW, is 4.1336 KW.

Electrical Expense = HP *.746 * hours * Kw cost * motor efficiency. As an illustration, consider a 50 HP compressor that consumes $.06 per Kwh of electricity and has a 90% efficiency electric motor. $5,172.26 is the yearly cost for 50 HP multiplied by.746 over 2,080 hours.

In order to create energy which can be kept in a tank for later use, air compressors work by applying pressure to atmospheric air. Similar to an open balloon, when the compressed air is purposefully released, pressure builds up, transforming the potential energy into productive kinetic energy.

To know more about compressor visit;

https://brainly.com/question/28963656

#SPJ4

Answer:

39.04 J

Explanation:

Definition of work

[tex]W=fd[/tex]

[tex]W=[/tex] Work

[tex]f=[/tex] force

[tex]d=[/tex] displacement

In this case,

[tex]f=6.4[/tex]

[tex]d=6.1[/tex]

[tex]W=6.4*6.1[/tex]

[tex]W=39.04[/tex]

Answer:

Below

Explanation:

When the switch is closed the circuit is complete....the coil in the circuit will act as a solenoid magnet and draw the iron in thus raising the sign.

For the chain: linear density =ρ, length =l. The chain is placed on a smooth plane. The speed of the chain when the left end leaves the plane is the same as its initial speed, which is zero.

Generally, To determine the speed of the chain when the left end leaves the plane, we need to consider the forces acting on the chain and use Newton's second law to find the acceleration of the chain.

The forces acting on the chain are the force of gravity and the normal force from the plane. The force of gravity is downward and is equal to the weight of the chain, which is given by the equation:

Fg = mg

where m is the mass of the chain and g is the acceleration due to gravity. The normal force from the plane is upward and is equal to the force of gravity, since the chain is stationary at this moment.

Newton's second law states that the acceleration of an object is equal to the net force acting on it divided by its mass. Therefore, the acceleration of the chain is given by:

a = (Fg - Fn)/m = (mg - mg)/m = 0 m/s^2

Since the acceleration of the chain is zero, the speed of the chain does not change as it drops.

Read more about speed

https://brainly.com/question/28224010

#SPJ1

CQ not found

it take the ant   68.9 seconds to get across  the other edge of a long strip.

If the ant is moving at a constant speed, the velocity vector will have the same magnitude at any point, and can be decomposed in two vectors, along directions perpendicular each other.

So then, if we choose these directions coincident with the long edge of the paper, and the other perpendicular to it, the components of the velocity vector, along these axes, can be calculated as the projections of this vector along these axes.

We only are interested in the component of the velocity across the paper, that can be calculated as follows:

vₓ = v* sin θ, where v is the magnitude of the velocity, and θ the angle that forms v with the long edge.

We know that v= 0.6 cm/s, and θ = 40º, so we can find vₓ as follows:

vₓ = 0.6 cm/s x sin 40 º

Vx = 0.6 cm/s x 0.7451 =  0.447 cm/s

Applying the definition of average velocity, we can solve for t:

time =  30.8 cm/ 0.447

time = 68.9 seconds

Learn more about average velocity at:  https://brainly.com/question/17444459

#SPJ1

The ratio of k is equal towards the temperature constant for such reaction constants at a certain temperature, and the values of the rate constants for the forward or reverse reactions are concentrations at that temperature.

A forward response is a reversible reaction wherein products are created from reactants so it moves from left to right. A reversible reaction that moves from right to left is referred to as a backward reaction since reactants are created from products.

In some oxidation processes, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D.

To know more about  reversible reaction visit:

https://brainly.com/question/16614705

#SPJ4

The values of the rate constants for the forward or reverse reactions are concentrations at that temperature, and the ratio of k is equal towards the temperature constant for such reaction constants.

Why is a reaction reversible?

A chemical reaction that is reversible occurs when the reactants generate products, which then combine to return the reactants to their original state.

When the rate of the forward reaction and the rate of the reverse reaction are equal, equilibrium is reached. At equilibrium, the concentrations of all the reactants and products are fixed. The amount of reactant to product in a chemical reaction can be compared to derive the equilibrium constant, which is used to predict chemical behavior. The rate constants are fixed at some temperature.

To learn more about equilibrium constant use link below:

https://brainly.com/question/19340344

#SPJ4

(a) The normal force on the sled is 490 N.

( b ) The sleds acceleration in the horizontal direction is 0.52 m/s².

The normal force on the sled is the upward force on the sled due to weight of the sled acting downwards.

The normal force on the sled is calculated as follows;

N = mg

where;

N = 50 kg x 9.8 m/s²

N = 490 N

The acceleration of the sled is calculated by applying Newton's second law of motion as shown below;

Fx = ma

F cosθ = ma

a = Fcosθ / m

where;

a = ( 30 N x  cos30 ) / ( 50 )

a = 0.52 m/s²

Thus, the acceleration of the sled is a function of net force and mass of the sled.

Learn more about normal force here: https://brainly.com/question/28788588

#SPJ1

Mgsin, As a result, at a state of dynamic equilibrium, the frictional force exerted on a mass sliding down an incline is proportional to the object's weight times the sine of the incline angle.

In contrast to velocity, which describes the speed and direction of such an object's movement, speed is the speed of moves along a path. Alternatively, velocity is a vector while speed is a scalar quantity.

A motion or activity has velocity when it moves quickly. Another term for speed is celerity, which is also a synonym. The measurement of an object's rate and direction of positional change is known as its velocity in physics.

To know more about Velocity visit:

https://brainly.com/question/18084516

#SPJ4

The range of a projectile is the horizontal distance the projectile travels from the time it is launched to the time it comes back down to the same height at which it is launched.

Answer:

Explanation:

The horizontal displacement of the projectile is called the range of the projectile. The range of the projectile depends on the object's initial velocity.

Answer:

The weight of an object is a measure of the force of gravity on the object. It is calculated by multiplying the mass of the object by the acceleration due to gravity. On Earth, the acceleration due to gravity is approximately 9.8 meters per second squared (m/s^2).

Therefore, to calculate the weight of the Mars rover Spirit on Earth, we can use the formula:

weight = mass * acceleration due to gravity

In this case, the mass of the Mars rover is 836 kg, and the acceleration due to gravity on Earth is 9.8 m/s^2. Plugging these values into the formula, we get:

weight = 836 kg * 9.8 m/s^2

This simplifies to:

weight = 8194.8 kg*m/s^2

The weight of the Mars rover Spirit on Earth is approximately 8195 kg*m/s^2.

This argument is valid because the bar is a homogeneous linear conductor, and the magnetic field around it must be constant.

A magnetic field is a region of space in which a magnetic force is exerted on any magnet, electric current, or magnetic material. It is created by an electric current, such as the electric current in a wire. It is also created by the motion of electric charges, such as those found in an electromagnet. The strength of the magnetic field increases as the electric current increases. The direction of the magnetic field is determined by the direction of the electric current.

The field at any point along the bar is proportional to the current passing through it, which remains constant for a homogeneous conductor. Therefore, the field at any point along the bar must be the same as at the midpoint, just with a larger magnitude. This implies that the average effective magnetic field along the bar is five times larger than the field at the midpoint.

To know more about magnetic field click-

https://brainly.com/question/14411049

#SPJ4

He explains two components of intelligence: the "g" factor (general ability) and the "s" factor (specific ability). The "g" factor of a person's general mental tasks, while the "s" factor is solely intellectual skills.

certain g and s abilities. According to Spearman's two-factor theory, intelligence is divided into two categories: general intelligence ("g") and specific ability ("s"). Spearman proposed that the "s" component was particular to a certain feature of intelligence to account for variations in performance on various tasks.

S component Individual factors, or empirically the tiniest subclusters of intercorrelations or common variance, are identified in several intelligence tests (specific). The most recent update was on September 30, 2022. Features of the "S" Factor: It is absorbed and learned from the surroundings. Within a single person, it varies from activity to activity. Each person has a different level of "S" ability.

to know more about intelligence here:

brainly.com/question/15020507

#SPJ1

The remote PIC should be aware of the wind gust because of a)  the rapid change in direction and speed which causes turbulence.

The wind gust is a sudden short-term increase in wind speed. According to US weather observation practice, a gust is reported when the maximum wind speed reaches at least 16 knots and the difference between the maximum wind speed and the light wind speed reaches at least 9 knots. Wind forces can disrupt a building's load path or pierce the building's skin. Doors and windows can burst in really high winds. In other cases, nearby debris can be caught in the wind and flung into the building's envelope.

Learn more about the wind gust in

https://brainly.com/question/459236

#SPJ4

All of the magnetic domains in an unmagnetized item, such as the original piece of metal in our experiment below, point in different directions.

When a metal gets magnetized, as when it is rubbed with a strong magnet, all like magnetic poles line up and point in the same direction. Atoms in ferromagnetic materials form formations known as domains. A domain is an internal region of a material in which groups of magnetic moments spontaneously align in the same direction. When the external field is withdrawn, the domain walls are pinned in their new orientation, and the aligned domains generate a magnetic field. This is what happens when a ferromagnetic material is "magnetized" and transformed into a permanent magnet.

Learn more about magnetic here-

https://brainly.com/question/3160109

#SPJ4

Kinetic energy gained by the falling ball is equal to the change of potential energy is because mechanical energy remains conserved ,it only converts from one form to another form.

The mechanical energy stays rationed when just inner powers follow up on the body and no outside powers are in real life. It implies that motor and potential might continue to change all through the excursion. Be that as it may, their total is steady at each point.

The forces are moderate, i.e., they don't rely upon the way of the moving article and are just subject to the beginning and last position. For instance, the gravitational power is moderate in nature, though the opposition presented via air is non-moderate in nature as it relies upon the way.

From the diagram,we can see that object has potential energy =mgh because of height h.When it was dropped from height h potential energy starts decreasing and kinetic energy starts increasing because of velocity attained by the body.Since mechanical energy is conserved,therefore kinetic and potential energy is equal.

To know more about potential energy, visit here:

https://brainly.com/question/9349250

#SPJ4

one of released energy for each coulomb of charge that travels across electrodes with a one volt potential difference. V joule, J/C is the correct way to describe this relationship.

A tool that transfers electricity from just an instrument to something like a patient for therapy or surgery. Examples include a tiny metal plate or needle. In order to help recorders diagnose certain problems, electrodes can also transport electrical impulses from the heart, brain, muscles, skin, or other physiological regions.

An electrode is a conductor for electricity that establishes electrical contact with nonmetallic components of a circuit, like an electrolyte, a semiconductor, or a vacuum. This may also go by the names anode or cathode if it is a part of an electrochemical cell.

To know more about electrodes visit:

https://brainly.com/question/17060277

#SPJ4

nB = 1.5290 for light having a 435.8 nm air wavelength. The difference, lA - lB, in their wavelengths inside the glass is 221.4nm.

The refractive index of a medium is defined as the speed of light in a vacuum (c) divided by the speed of light in the medium (v). This can be expressed mathematically as:

= n

= c / v

The wavelength of light in a medium is related to its frequency (f) and its speed in the medium (v) according to the following equation:

= lambda

= v / f

where lambda is the wavelength of the light in the medium.

We can use these equations to find the difference in the wavelengths of the two types of light inside the glass. Letting lA and lB represent the wavelengths of the light with wavelengths 656.3 nm and 435.8 nm inside the glass, respectively, we can set up the following equation:

for nA

= nA

= c / v

= c / (f x lA)

for nB

= nB

= c / v

= c / (f x lB)

Dividing the eq. we know:

=> nA / nB = (f x lB) / (f x lA)

= lB / lA

Inserting the known values for nA, nB, and lA, we get:

=> 1.5160 / 1.5290 = lB / 656.3 nm

Solving for lB, we find that lB = 434.9 nm.

The difference in the wavelengths inside the glass is then:

=> lA - lB = 656.3 nm - 434.9 nm

= 221.4 nm

Therefore, the difference in the wavelengths of the two types of light inside the glass is 221.4 nm.

To know more about wavelength please refer: https://brainly.com/question/27557868

#SPJ4

Answer:

The equation for the velocity component in the x-direction is : vx(t) = v(0) Cosθ.

Explanation:

here v(0) is the initial velocity

The water purification procedure, such as filtration, sedimentation, distillation, etc.

Analysis of the reduction in microbes that is enough to protect against the transmission of pathogens in water is debated below. Chlorination is the most widely used method for disinfecting water supplies in the United States.

The most efficient way to desalinize salt water is by using a method called distillation. This is where you boil the water and then assemble the condensation. The steam will provide fresh salt-less water for you to drink.

So we can conclude that Chlorination is the activity of adding chlorine to drinking water to kill parasites bacteria and viruses.

Learn more about water here: https://brainly.com/question/1313076

#SPJ1

The x is the number of hours. want to determine the probability (P) x >= 13 To convert it to a percentage, multiply it by 100, yielding 84.13%.

Probability is simply the likelihood of something occurring. When we are uncertain about the result of an event, we might discuss the probabilities of several outcomes—how likely they are. Statistics is the study of occurrences guided by probability. If x is N(14,1), it can be transformed to N(0,1) using z = (x - mean) / standard deviation and the probability can be calculated using a conventional normal probability table.

P(x > 13)

= P(z > (13 - 14)/1)

= P(z > -1)

= 1 minus P(z -1)

= 1 minus 0.1587

= 0.8413

To convert it to a percentage, multiply it by 100, yielding 84.13%.

Learn more about conventional here-

https://brainly.com/question/28222820

#SPJ4

As soon as something is liberated from rest, it enters free fall. AND An orbiting satellite is subject to the gravitational pull of a planet.

Rising and falling ocean tides are a result of the moon's gravitational pull. Strong movement or a natural propensity toward something or someone, whether or whether it is related: A lot of research has been done on their gravitational pull toward harmful conduct.

Any two mass-bearing objects are drawn together by the gravitational pull. Since the gravitational force never attempts to push masses away, it is said to as attractive since it constantly seeks to draw masses together.

To know more about Gravitational visit:

https://brainly.com/question/3009841

#SPJ4

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

What is acceleration?

In mechanics, acceleration is the rate of change of an object's velocity with respect to time. Acceleration is a vector quantity (as long as it has magnitude and direction). The direction of an object's acceleration is given by the direction of the net force acting on that object.

For example, if a vehicle starts from rest (zero velocity in the inertial frame) and moves in a straight line while increasing speed, the vehicle accelerates in the direction of travel. When the vehicle turns, it experiences acceleration in a new direction and changes its motion vector. Acceleration in the vehicle's current direction of travel is called linear (or tangential, in the case of circular motion) acceleration, and the passenger perceives that response as pushing back into the seat.

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

To know more about acceleration visit:

https://brainly.com/question/460763

#SPJ4

Answer:

let the first point be a second be b third be c fourth be d and last point be e.

The point a and d are incorrect. because tye plotting of the is incorrect

Answer:

ω = (K / M)^1/2   fundamental frequency for Simple Harmonic Motion

ω = (49 kg-m / (sec^2 - m) * 7.2 kg)^1/2 =  2.61 /sec

F = -K A    Hooke's Law and spring constant

A = 7.2 kg * 9.80 m/s^2 / 49 n/m = 1.44 m       amplitude

V =  ω A = 2.61 / sec * 1.44 m = 3.6 m/s        maximum speed

The total voltage in the circuit is 8 V. Then, the current passing through the resistor R3 is 1.95 A. The power supply to this resistor by the batteries is 15.6 W.

According to Ohm's law, the voltage through a closed circuit is the product of the current passing through the circuit and resistance through it.

Hence, V = I R.

Given that the resistance through the resistor R3 = 4.10 Ω

The voltage across each batteries = 4 V

Total voltages =  4 + 4 = 8V

Current = voltage/ resistance

             = 8 V/ 4.10 Ω

             = 1.95 A.

Power through a circuit is the product of current and voltage through it.

P = I V

Power supplied to R3 = 1.95 A × 8 V = 15.6 W.

Therefore, the power supplied by the batteries to the resistor R3  is 15.6 W.

To find more on Ohm's law, refer here:

https://brainly.com/question/1247379

#SPJ1

The scenario that involves at least one chemical change happening is your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam. The correct option is D.

When bonds between molecules or atoms are created, disrupted, or both, chemical changes result. This implies that a substance with a particular set of properties—such as melting point, color, flavor, etc.—becomes a substance with a different set of characteristics.

Three essential chemical components are used in the production of jam: Acids, sugar, and pectin.

Therefore, the correct option is D, Your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam.

To learn more about chemical change, refer to the link:

https://brainly.com/question/29923908

#SPJ1