so de fanga gu se si gage humang we sapa shata phoni we heo sang pai​

Answer: The factor that lead to cyclopropane being less stable than the other cycloalkanes is the presence of a RING STRAIN.

Explanation:

In organic chemistry, the end carbon atoms of an open aliphatic chain can join together to form a closed system or ring to form cycloalkanes. Such compounds are known as cyclic compounds. Examples include cyclopropane, cyclobutane, cyclopentane and many among others.

Cyclopropane is less stable than other cycloalkanes mentioned above because of the presence of ring strain in its structural arrangement. The ring strain is the spatial orientation of atoms of the cycloalkane compounds which tend to give off a very high and non favourable energy. The release of heat energy which is stored in the bonds and molecules cause the ring to be UNSTABLE and REACTIVE.

The presence of the ring strain affects mainly the structures and the conformational function of the smaller cycloalkanes. cyclopropane, which is the smallest cycloalkane than the rest mentioned above, contains only 3 carbons with a small ring.

Explanation:

Energy is essential to life and all living organisms. The sun, directly or indirectly, is the source of all the energy available on Earth. Our energy choices and decisions impact Earth's natural systems in ways we may not be aware of, so it is essential that we choose our energy sources carefully

Answer:

(d) the ion with 24 electrons, 30 neutrons, and a 3+ charge ... (b) the ion with 36 electrons, 35 protons, and 45 neutrons.

Answer:

Decanitrogen is molecular

Explanation:

Answer:

Dec a nitrogen is Molecular

Explanation:

hey mate i hope it will help you...!

Answer:

The three freezing points will all be slightly different. It is given that a water solution has a freezing point of zero degrees Celsius, so water would have a freezing temperature below that. Salt will lower the freezing point, the more that is added.

Explanation:

Detritivore

Explanation:

they eat the dead things

Answer:

The solid-liquid line in the water phase diagram has a negative slope, whereas for most other substances it has a positive slope.

The ice has a lower density as compared to water still they have in the solid phase.

In the solid-liquid line in the water phase diagram it contains the negative slope. While the most other substance should have the positive slope.

Also, when the pressure is applied so the higher density should be favored. In the water, the highest density phase should be likely the liquid water.

Learn more about liquid here: https://brainly.com/question/17109464

Answer:

true

Explanation:

because an organism have many roles in food web

Answer:

[tex]pH=9.32[/tex]

Explanation:

Hello there!

In this case, according to the given scenario, it turns out necessary for us to realize that the addition of NaOH consumes the conjugate base, NH4Cl, and produces more base, NH3; that is why the reaction taking place is:

[tex]NH_4^++OH^-\rightarrow NH_3+H_2O[/tex]

Thus, the reacting moles of ammonium and hydroxide ions are:

[tex]n_{NH_4^+}=0.0800L*0.188mol/L=0.01504mol\\\\n_{OH^-}=0.0200L*0.100mol/L=0.00200mol[/tex]

Thus, the resulting moles of ammonium and ammonia are respectively:

[tex]n_{NH_4^+}=0.01504mol-0.00200mol=0.01304mol\\\\n_{OH^-}=0.0800L*0.163mol/L+0.00200mol=0.01504mol[/tex]

Then, by using the Henderson-Hasselbach equation and recalling the pKb of ammonia (4.74), we first calculate the pOH as follows:

[tex]pOH=pKb+log(\frac{n_{NH_4^+}}{n_{NH_3}} )\\\\pOH=4.74+log(\frac{0.01304mol}{0.01504mol} )\\\\pOH=4.68[/tex]

And finally the pH:

[tex]pH=14-4.68\\\\pH=9.32[/tex]

Regards!

Answer:

A mixture of sulfuric acid and nitric acid will produce small quantities of the nitronium ion (NO2 ): The nitronium ion has a central nitrogen atom with a positive charge double bonded to two oxygen atoms on both sides. Each oxygen atom carries two lone pairs of electrons. Does the nitronium ion have any significant resonance structures?

Explanation:

The structure of nitronium ion is shown below:

Any molecule to exhibit resonance, it should have alternating double bonds.

Resonance is the phenomenon in which the structure of a molecule can be represented in two or more forms and each form is called canonical form.

The canonical forms do not differ in the position of atoms and they differ only in the position of double bonds.

For the given molecule, there are no alternating double bonds.

Hence, nitronium ion does not exhibit any significant resonance structures.

Answer:

the number of gas molecules in the sample

Answer:

32.1 g

Explanation:

3CaCl₂ + 2AlF₃ → 3CaF₂ + 2AlCl₃

First we convert 36.5 g of AlF₃ into moles, using its molar mass:

36.5 g ÷ 133.34 g/mol = 0.274 mol AlF₃

Then we convert 0.274 moles of AlF₃ into moles of CaF₂, using the stoichiometric coefficients of the reaction:

0.274 mol AlF₃ * [tex]\frac{3molCaF_2}{2molAlF_3}[/tex] = 0.411 mol CaF₂

Finally we convert 0.411 moles of CaF₂ into grams, using its molar mass:

0.411 mol * 78.07 g/mol = 32.1 g

Answer:

Enzyme ? ...............

Answer:

A

Explanation:

Answer:

[tex]Y_A=92.1\%\\\\Y_B=89.6\%[/tex]

Explanation:

Hello there!

In this case, according to the given chemical equation for the reaction for the production of potassium permanganate, we can see a 2:2 mole ratio of this product to the starting manganese (II) oxide, which means, we can calculate the theoretical yield of the former via stoichiometry:

[tex]m_{KMnO_4}=50.0gMnO_2*\frac{1molMnO_2}{86.94gMnO_2}*\frac{2molKMnO_4}{2molMnO_2} *\frac{158.034gKMnO_4}{1molKMnO_4} \\\\m_{KMnO_4}=90.9gKMnO_4[/tex]

Now, we are able to compute the percent yields, by using the actual yield each scientist got:

[tex]Y_A=\frac{83.67g}{90.9g} *100\%=92.1\%\\\\Y_B=\frac{81.35g}{90.9g} *100\%=89.6\%[/tex]

Regards!

Answer:

Total number of gum drops = 10 + 17 +18

= 45

Explanation:

[tex] \frac{10}{45} \times 100 \\ = 22.222222\ \ \% \\ 22\% \: gum \: drops \: \\ to \: 2 \: sf[/tex]

Answer:

42000km

Explanation:

Average Speed (v) can be calculated using the formula as follows:

Average speed = distance (d) ÷ time (t)

According to this question, a space shuttle travels around the Earth at a constant speed of 28000 km/hr in 90 minutes.

Since 60 minutes = 1 hr

90 minutes = 90/60

= 3/2 or 1.5hours.

Using speed = distance/time

Distance (km) = speed × time

Distance = 28000 km/hr × 1.5hr

Distance = 42000km

Answer:

3×10⁵ N/m²

Explanation:

From the question given above, the following data were obtained:

Force (F) = 450 N

Area (A) = 0.0015 m²

Pressure (P) =?

Pressure is simply defined as the force per unit area. Mathematically, it is expressed as:

Pressure (P) = Force (F) / Area (A)

P = F/A

With the above formula, we can obtain the pressure exerted by the man on the ground. This can be obtained as follow:

Force (F) = 450 N

Area (A) = 0.0015 m²

Pressure (P) =?

P = F/A

P = 450 /0.0015

P = 3×10⁵ N/m²

Thus, the pressure exerted by the man on the ground is 3×10⁵ N/m².

Answer:

Ions.

Explanation:

Ions are the free moving, charged particles in a molten mixture of aluminum oxide and cryolite because the liquid state loosely held the molecules and the the molecules can easily move from one place to another. These ions helps in the conduction of electricity in the solution due to its free movement so we can say that ions are the charge particles that moves freely in the mixture of aluminum oxide and cryolite.

The free moving, charged particles in a molten mixture of aluminium oxide

and cryolite are known as Ions.

Ions are referred to an atom or compound which possesses an electrical

charge.The charge could be positive or negative and the positive ions are

called cations while the negative ions are referred to an anions.

Ions are usually free moving, take part in chemical reactions and help to

conduct electricity as a result of them being transferred from one point to

another.

Read more on https://brainly.com/question/7222067

Answer:

The given electronic configuration is long hand notation.

Explanation:

Long-hand notation of representing electronic configuration is defined as the arrangement of total number of electrons that are present in an element.

Noble-gas notation of representing electronic configuration is defined as the arrangement of valence electrons in the element. The core electrons are represented as the previous noble gas of the element that is considered.

The given electronic configuration of potassium (K):  

The above configuration has all the electrons that are contained in the nucleus of an element. Thus, this configuration is a long-hand notation.

[tex]CuCl_2+2NaNO_3 \rightarrow Cu(NO_3)_2 + 2NaCl[/tex]

Answer:

pH = 11.3

Explanation:

From the question given above, the following data were obtained:

Concentration of hydronium ion [H₃O⁺] = 4.950×10¯¹² M

pH =.?

The pH of a solution is defined by the following equation:

pH = –Log [H₃O⁺]

Thus, with the above formula, we can obtain the pH of the solution as follow:

Concentration of hydronium ion [H₃O⁺] = 4.950×10¯¹² M

pH =.?

pH = –Log [H₃O⁺]

pH = –Log 4.950×10¯¹²

pH = 11.3

Answer:

49.5J/°C

Explanation:

The hot water lost some energy that is gained for cold water and the calorimeter.

The equation is:

Q(Hot water) = Q(Cold water) + Q(Calorimeter)

Where:

Q(Hot water) = S*m*ΔT = 4.184J/g°C*54.56g*(80.4°C-59.4°C) = 4794J

Q(Cold water) = S*m*ΔT = 4.184J/g°C*47.24g*(59.4°C-40°C) = 3834J

That means the heat gained by the calorimeter is

Q(Calorimeter) = 4794J - 3834J = 960J

The calorimeter constant is the heat gained per °C. The change in temperature of the calorimeter is:

59.4°C-40°C = 19.4°C

And calorimeter constant is:

960J/19.4°C =

Answer:

D. length × width

Explanation:

eg. 30 cm(length) × 20cm(width) = 600cm²

Explanation:

First you must calculate the number of moles in this solution, by rearranging the equation. No. Moles (mol) = Molarity (M) x Volume (L) = 0.5 x 2. = 1 mol.

For NaCl, the molar mass is 58.44 g/mol. Now we can use the rearranged equation. Mass (g) = No. Moles (mol) x Molar Mass (g/mol) = 1 x 58.44. = 58.44 g.

Answer:

Number of moles : Mass (g) ÷ relative atomic mass

Answer:

The most intense line in the emission spectrum for sodium appears at a wavelength of 589 nm.

What color would you expect to observe when a solution that contains sodium ions is heated strongly in the flame of a Bunsen burner?

Explanation:

Put a clean wire loop in a solid sample of the compound containing sodium ions, then keep it on the blue flame of the Bunsen burner.

The color of sodium ions in the Bunsen burner shows charactrestic yellow color.

Answer:

See explanation and image attached

Explanation:

A Grignard reagent is an alkyl magnesium halide. If it reacts with ethyl formate, an intermediate is formed as shown.

This intermediate can undergo water hydrolysis to form a diol, ethanol and MgBrOH.

Oxidation of the diol obtained now yields the corresponding alkanal which in this case is ethanal.

The scheme of the reaction is shown in the image attached to this answer.

Answer:

the answer is the first one

Na+