Some natural and synthetic materials are made of long repeating units. What are these best referred to as?



O Links (left) and chains (right)
O Molecules (left) and macromolecules (right)
O Solutes (left) and solutions (right)
O Monomer (left) and polymer (right)

The ratio of the carbon to other atoms would be 2.49375:3.9901:1.000 and the empirical formula of the compound would be  [tex]C_2H_8O[/tex]

The compound contains C, H, and O according to the following information:

C = 4.9875 mol

H = 7.9802 mol

O = 2.00 mol

In order to obtain the empirical formula of the compound, divide the mol of each atom by the smallest mol. In this case, the smallest mol is 2.00

C = 4.9875/2.00

  = 2.49375

H = 7.9802/2.00

    = 3.9901

O = 2.00/2.00

   = 1.0000

Thus, the ratio of carbon to the rest of the atoms present in the compound is 2.49375:3.9901:1.000

In order to find the empirical formula of the compound, the mole of each atom needs to be approximated to the nearest whole number.

C = 2

H = 8

O = 1

Thus, the empirical formula of the compound is [tex]C_2H_8O[/tex].

More on empirical formulas can be found here: https://brainly.com/question/14044066

#SPJ1

The true statement is that 363 kJ of heat is evolved in the process.

We know that a reaction has to do with the combination of the reactants in order to yield the products. We can see the thermochemical balanced reaction equation of the process as it was written in the question. A thermochemical equation is the type of equation that includes the energy that is absorbed or evolved in the reaction equation.

Now we can see that the reaction shows the combination of hydrogen and oxygen to give two molecules of water. This is a gas phase reaction and heat is given out according to the thermochemical reaction equation.

From the reaction equation;

If 2 moles of hydrogen evolves 484 kJ of energy

1.5 moles of oxygen evolves  1.5 moles *  484 kJ /2 moles

= 363 kJ

Learn more about thermochemical reaction:https://brainly.com/question/5102780

#SPJ1

Answer: -207936x>112+2x+83

Taking into account the definition of density, the length of each side of the cube is 4 cm.

In other words, density is a quantity that allows to measure the amount of mass in a certain volume of a substance.

The expression for the calculation of density is:

density= mass÷ volume

From this expression it can be deduced that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.

In this case, you know that:

Replacing in the definition of density:

2 g/cm³= 128 g÷ volume

Solving:

2 g/cm³× volume= 128 g

volume= 128 g÷ 2 g/cm³

volume= 64 cm³

The volume of a cube is equal to the measure of its side to the cube. That is to say:

Volume = side x side x side = side³

So, the length of each side of the cube can be calculated as:

64 cm³= side³

∛64 cm³= side

4 cm= side

In summary, each side of the cube has a measure of 4 cm.

Learn more about density:

brainly.com/question/14401256

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

This isn't chemistry but I believe the answer is D, before a suspect in custody is questioned.

Hope this helped.

Answer: D

Explanation:

The words "You have the right to remain silent.” means Evan is being read his Miranda rights, option C.

Miranda rights are warnings issued by law enforcements to individuals in custody to protect their rights as part of the criminal procedure rule. These rights were created in 1966 consequently by the Miranda vs Arizona supreme court case.

The Miranda warning contains the words "You have the right to remain silent. Anything you say or do may be used against you in the court of law. You have the right to an attorney.” When the police officers read this to Evan, it was his Miranda rights.

Learn more on rights here: https://brainly.com/question/1261546

#SPJ1

The element selected is carbon and the isotopes are carbon-12, carbon-13, and carbon-14.

The number of protons, electrons, and neutrons for each isotope of carbon are as follows:

The isotope notation for each is¹²₆C, ¹³₆C, and ¹⁴₆C.

The carbon-14 isotope is used in the radioactive dating of substances.

Isotopes are atoms of the same element that differ from each other in their masses.

Isotopes of the same element have different masses as a result of the difference in the number of neutrons in the nucleus of the atoms of the element.

The existence of isotopes of elements accounts for why the atomic masses of elements are not whole numbers.

Learn more about isotopes at: https://brainly.com/question/12694278

#SPJ1

Radiation is produced when unstable or radioactive atoms through the process of becoming stable. We refer to this process as radioactive decay over time. Two protons and two neutrons are lost from the nucleus as a result of alpha decay.

An unstable nucleus releases radiation and changes into the nucleus of one or more additional elements during a nuclear decay process, also known as radioactive decay.

The ensuing offspring nuclei are less energetic and heavier than the parent nucleus that underwent decay, making them more stable.

For example, by producing an alpha particle, the unstable uranium-238 nucleus naturally decays into a thorium-234 nucleus. The most prevalent radioactive decay processes are decay, emission, decay, positron emission, and electron capture.

Thus, Radiation is produced when unstable or radioactive atoms through the process of becoming stable.

To learn more about  nuclear decay reaction follow the link below;

https://brainly.com/question/2312116

#SPJ1

Answer:

2 of the children's feet will be webbed, and the other 2 will have paws.

Explanation:

The dominant genes of the Mother will override the recessive genes of the Father, since there isn't 2 of the recessive genes, except for on the other 2 children. If there was a dominant gene, it would have at least 1 capital letter, and that dominant gene would prevent the recessive (lowercase) letter from showing up.

Answer: Between non-metals

Explanation:

The molecular formula is (CH2O)5 when the scale factor is 5 and the empirical formula is CH2O.

Considering the question given above, the following data were obtained:

Empirical formula is CH₂O

Molar mass of compound = 150 g/mol

Scaling factor (n) =?

Empirical formula × n = molar mass

[CH₂O]n = 150

[12 + (2×1) + 16]n = 150

[12 + 2 + 16]n = 150

30n = 150

Divide both sides by 30

n = 5

Therefore, the scaling factor is 5

Learn more about empirical formula at:

https://brainly.com/question/14044066

#SPJ1

Answer:

The scale factor is 5. The formula is CH2O.

Multiply each by 5.

So:

C (there is only one)= 1×5

H (there are 2)= 2×5

O(there is only one)= 1×5

Equalling= C5H10O5

The net ionic equation of the reaction as it is shown have been given here by the equation; [tex]Cu^+(aq) + Cl^-(aq) ---- > CuCl(s)[/tex]

The term net ionic equation has to do with the equation that shows the manner in which we are able to convey the information that concerns the ions that do not undergo a change in the reaction.

In this case, we have the reaction that occurs between ammonium chloride and copper II acetate which would produce a copper I chloride and an ammonium acetate product. The net ionic equation would now be;

[tex]Cu^+(aq) + Cl^-(aq) ---- > CuCl(s)[/tex]

Learn more about net ionic equation:https://brainly.com/question/15466794

#SPJ1

The state of matter with no definite volume and no definite shape is gas.

Matter is anything that has mass and occupies space.

There are three main physical states in which matter can exist. Each of these physical states has unique properties that are used to identify them.

The three physical states of matter are:

Learn more about states of matter at: https://brainly.com/question/3998772

#SPJ1

The standard potential for the galvanic cell at 25°C is 1.98 V.

A galvanic cell or an electrochemical cell is a cell that converts the chemical energy of the reactions occurring within it to electrical energy.

The galvanic cell is able to convert chemical energy to electrical energy as a result of the redox reactions occurring within the cell.

The standard potential for the given galvanic cell at 25°C is calculated as follows

Standard reduction potentials:

Ti³⁺ + 3e⁻ ---> Ti; E° = − 1.21 V (anode)

Fe³⁺⁺+ e⁻--> Fe²⁺ ; E° = 0.77 volts (cathode)

Eºcell = 0.77 V - (-1.21 V)

Eºcell = 1.98 V

Learn more about the standard potential of a cell at: https://brainly.com/question/19036092

#SPJ1

Ancient Martian riverbed channels were formed by molten lava rather than by liquid water.

Flowing lava can carve and carve paths like water-eroded riverbeds and canyons, and could explain at least one of the winding channels on Mars' surface. Many waterways on Mars were carved by water, but not all. Lava can also flow, creating features similar to stream channels. However, lava functions in many different ways.

Scientists have known since the Mariner 9 mission in 1972 that volcanic structures cover most of the surface of Mars. These features include vast lava flows, vast lava plains, and the largest known volcanoes in the solar system. Massive torrents of water carry rocks and rocks torn from upstream springs. These scratch and abrade the canal floor, creating long lines that floodwaters can wash away and expand.

Learn more about Flowing lava here:-https://brainly.com/question/28434097

#SPJ9

The nuclear equation for the Alpha decay of a radioactive Radium-226 isotope is ²²⁶₈₈Ra → ²²²₈₆Rn + ⁴₂He

The sun of the mass numbers of the reactant equal the sum of the mass numbers of the product and radium 226 decay by alpha particles radiation to an inert gas and radon 222 which also decay by alpha particle radiation and due to the short half life of radon 222 there is high probability it will decay in the body and alpha particle is a helium nucleus it contain 2 proton an 2 neutron foe mass number of 4 and during alpha decay an atomic nucleus emit an alpha particles and it transform into an atom with atomic number 2 less and mass number 4 less

And the radium 226 decay through alpha particles emission to form radon 222 according to the equation ²²⁶₈₈Ra → ²²²₈₆Rn + ⁴₂He

Know more about Alpha decay

https://brainly.com/question/17227810

#SPJ1

Thus, radium-226 decays through α-particle emission to form radon-222 according to the equation:

The volume occupied by the given mass of iron is 0.83 [tex]cm^{3}[/tex].

The term specific gravity has to do with the ratio of the density of an object to the density of water. We must note that density of water is the bench mark that have been used to obtain the densities of every other substances hence it was assigned a density of 1.00 g/ [tex]cm^{3}[/tex].

Now we know from the question that;

Density of water =  1.00 g/ [tex]cm^{3}[/tex]

Specific gravity of iron = 7.87

Mass of the iron = 6.50 g

Density of iron = Specific gravity * density of water =  7.87 * 1.00 g/ [tex]cm^{3}[/tex]

=   7.87 g/ [tex]cm^{3}[/tex]

Given that;

Density = mass/volume

volume = mass/Density

volume = 6.50 g/7.87 g/ [tex]cm^{3}[/tex]

Volume = 0.83  [tex]cm^{3}[/tex]

We can see that from the calculations, the density of the iron as is clear in the procedure is 7.87 g/cm3  and it has a volume of 0.83 cm3 .

Learn more about density:https://brainly.com/question/15164682

#SPJ1

Conducting an autopsy means Jacob is basically dissecting human  bodies to determine how someone died.

An autopsy, also known as a post-mortem examination, is a specialized surgical procedure used to determine the cause and manner of death. The cause of death is generally the medical reason explaining why a patient passed. The manner of death is usually the circumstances surrounding the death.

What we learn from autopsies allows clinicians to better understand the disease processes, accurately diagnose diseases, improve therapy, and also potentially aid other patients who are currently suffering from a similar disease. There are many reasons why families choose to pursue having an autopsy done. Consent for an autopsy includes diagnostic, education, quality improvement, and research.

It is mostly used by the law enforcements as well to know also catch the culprits.

To know more about Autopsy

https://brainly.com/question/14403044

#SPJ1

83.246 ounces of silver is required to make the silver figure.

It is given that 10.49 g/cm^3 is the density of silver at Room temperature and the volume of Silver is 225cm^3.

To prepare silver of 225cm^3 of volume, we require the following:

Density = Mass/Volume

Mass = Density x Volume

Amount of silver = 10.49x225

Amount of silver = 2360.25 g

We know that,

100g = 3.5274 ounces

Then,

= 3.5274/100

= 0.035274 ounces of silver.

The mass of silver required in ounces = 2360.25 x 0.035274

The mass of silver in ounces = 83.246 ounces.

Therefore the mass of silver needed in ounces is 83.246 ounces. Through this conversion, the amount of any substance can be converted from kilograms to ounces.

To know more about pounds, click below:

https://brainly.com/question/25973294

#SPJ9

The percentage error of the above question is -2.03%.

The percentage error is defined as the approximation error which is present in data value is the discrepancy between an some approximation and exact value to it. This error can also be expressed as a relative error or an absolute error. An approximation error can occur because of the measurement error or computing machine precision.

Make sure in numerator the units off all the digit must be same.

Mathematically, we defined as

Percentage error = (change in value / original value) × 100

(-267.6 - (-273.15) )

= 0. 020

= 2. 020/ (-273.15) × 100

= -2. 03 %

Thus, we concluded that the percentage error of the above question is -2.03%.

learn more about percentage error:

https://brainly.com/question/6269728

#SPJ1

In silicon dioxide the number of the covalent bonds are there between each silicon atom with oxygen atoms is four.

In the silicon dioxide the total number of covalent bond is four between the each silicon atom with the oxygen atoms. The covalent bond is form when the two atoms mutually share the electrons and bond together. the compound which form covalent bond is called as covalent bond. the silicon dioxide form covalent bond because the electronegative difference between silicon and the oxygen is not much.

Thus, In silicon dioxide the number of the covalent bonds are there between each silicon atom with oxygen atoms is four.

To learn more about covalent bond here

https://brainly.com/question/10777799

#SPJ9

Answer:

V2 = 0.075 L

Explanation:

P1= first pressure 

P2= second pressure 

V1= first volume 

V2= second volume 

P1V1 = P2V2=
(0.20 atmospheres)(15 L) = (40 atmospheres)V2=

V2 = (0.20 atmospheres)(15 L)/(40 atmospheres)=

V2 = 0.075 L

Answer:

A). Water

PLEASE GIVE BRAINLIEST THANK YOU!!!

Answer:

water

Explanation:

Answer:

Condensation

Explanation:

We can see that H2O is formed when the two molecules join together, which is a characteristic of Condensation polymerization

The net ionic equation is :

Ba²⁺  +  2OH⁻ +  2H⁺  +  SO₄²⁻   ---->   BaSO₄  +  2H₂O

The balanced molecular equation is given as:

Ba(OH)₂   +  H₂SO₄   ----> BaSO₄  +  2H₂O

The net ionic equation is the equation in which we breaking up into ions and cut off the spectator ions that is the ion which is common in both side , we get :

complete ionic equation first :

Ba²⁺  +  2OH⁻  +  2H⁺  +  SO₄²⁻  ---->    BaSO₄  +  2H₂O

now. there are no spectator ion so net ionic equation is same :

Ba²⁺  +  2OH⁻ +  2H⁺  +  SO₄²⁻   ---->   BaSO₄  +  2H₂O

Thus, The net ionic equation is :

Ba²⁺  +  2OH⁻ +  2H⁺  +  SO₄²⁻   ---->   BaSO₄  +  2H₂O

To learn more about net ionic equation here

https://brainly.com/question/15466794

#SPJ9

Answer:

below

Explanation:

From periodic table this is dysprosium

Lewis structure of CH₃-CCH and then hybridization states for the three central atoms is sp³sp³ and sp

A Lewis structure is a very simplified representation of the valance shell electron in a molecule and it is used to show how the electron are arranged around individual atom in a molecule and in propyne there is 3 carbon and in that one carbon is triply bonded so this triply bonded carbon is sp and 2 singly bonded are sp³ hybridized

And the Lewis structure of propyne are

Know more about hybridization

https://brainly.com/question/17102269

#SPJ1

Answer:

Surface tension due to cohesion

Explanation:

Water molecules are polar meaning they have dipoles. The hydrogen end is partially positive while the oxygen end is partially negative. This is because oxygen with high atomic mass attracting most of the molecule's electron cloud to its end.

Due to this phenomenon water molecules act like little magnets that attract each other. The attraction of the molecules forms hydrogen bonds with each other. This is called cohesion (attraction of similar molecules).  Due to this, water is able to create a surface tension that acts like a ‘skin’ and can support some weight (including its own weight) without collapsing.

Read more on Brainly.com - https://brainly.com/question/13216792#readmore

Answer:

Cohesion of water

Explanation:

cohesion means sticking together so Before it overflows, the water forms a dome-like shape(rounded) above the rim of the glass. This dome-like shape forms due to the water molecules' cohesive properties, or their tendency to stick to one another.