The volume is decreased to 0. 50L, the number of moles of SO₂Cl₂at equilibrium will increase by 1–10% option - a is correct.
What is Le Chatelier's Principle.The guiding idea of Le Chatelier is as follows: A shift in the position of the equilibrium results from a change in one of the variables that characterize a system in equilibrium and cancels out the effects of that change.
Now to solve this question first we have to know the Le-chatelier's
Principle
The Principal that if a system in chemical equilibrium is subjected to a disturbance it tends to change in a way that opposes this disturbance.
SO₂Cl₂(g) ⇄ SO₂(g) + Cl₂(g)
Initially, there is one molecule at the left hand side of the reaction and two molecules are on the right. But, the Partial pressure of molecules on RHS is lower than LHS. Concentration of RHS molecules is Lower, forward reaction is more favorable.
Decreasing volume would result in increasing the total pressure.
Now, according to Le chatelier's Principle, the equilibrium will shift in such a way to oppose change under compression. Since there are more moles of Products than reactants, to counteract the increased pressure. The equilibrium will shift to LHS increasing the moles
of SO₂Cl₂ but since the concentration (Partial Pressure)
of SO₂Cl₂, it will not increase more than 10%
Hence, answer will be (a) Increase 1-10%.
To know more about Le Chatelier's principle visit:
https://brainly.com/question/29009512
#SPJ4
Iodine Monochloride reacts reversibly with Chlorine to form Iodine Trichloride, What will be the color of the equilibrium mixture
Answer:
Yellow
Explanation:
The color of the equilibrium mixture of Iodine Monochloride and Chlorine is yellow. When the mixture is heated, it becomes darker brown in color.
What is an irony definition?
In literary classes, the three most popular types are verbal irony, dramatic irony, and situational irony. When a speaker or narrator says something that contradicts what they mean, what they intend, or what the context necessitates, this is called verbal irony.
What is irony?One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.
Here,
The three most common varieties in literary studies are verbal irony, dramatic irony, and situational irony. Verbal irony occurs when a speaker or narrator says something that contradicts what they mean, what they intend, or what the context requires.
To know more about irony,
brainly.com/question/1695719
#SPJ4
The two elements that are frequently used for making transistors are
A. boron and aluminium
B. silicon and germanium
C. iridium and tungsten
D. niobium and columbium
The two elements that are frequently used for making transistors are niobium and columbium.
What is an element?It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
Learn more about elements,here:
https://brainly.com/question/14347616
#SPJ1
What is the priority nursing intervention for a patient who experienced a chemical burn injury?
Respiratory and fluid status are primary nursing interventions for patients with chemical burns.
When treating, make sure that the causative agent is completely removed. Remove contaminated clothing and jewelry and use the shower if necessary to wash off the chemicals for at least 20 minutes. Protect your eyes from chemical contamination. Cover the burn with a clean bandage.
During the first few days after a burn, check your peripheral pulse frequently for restricted blood flow. Carefully monitor hourly fluid intake and urine output, as well as blood pressure and heart rate. Any changes should be reported immediately to the burn surgeon.
Learn more about peripheral pulse visit:
brainly.com/question/8751059
#SPJ4
A food worker needs to
measure the temperature of
cold-held potato salad.
Where should she check the
temperature?
If a food service employee has to check the temperature of cold potato salad, she should do so at multiple places throughout the salad
If the dish is maintained between 40 and 140 degrees Fahrenheit, potato salad can be consumed around two hours after cooking. A nice approach to keep salad fresh for a long time is to refrigerate it at 40 F. Before reaching 140 F, the hot salad can be reheated.
Addition than potatoes, the salad ingredients may contain other ingredients with varying rates of cooling. Therefore, it is necessary to take temperature readings of the potato salad at various locations.
Learn more about the Temperature of refrigerator here:https://brainly.com/question/8148511
The complete question is-
A food worker needs to measure the temperature of cold-held potato salad where should she check the temperature
A. On the surface of the salad
B. Along the side of the salad dish
C. In multiple places throughout the salad
D. On the temperature gauge of the holding equipment
What do the small lines marked on the Meterstick represent?
The small lines marked on the Meterstick represents the measurement you make can be certain to the centimeter.
Centimeter is the metric unit of the measurement which is used for measuring the length of an object.
Meterstick is the measuring stick one meter long that is marked off in centimeters and usually millimeters. A meterstick is divided into 100 cm. The smallest lines on the meterstick are the centimeters which means that each measurement you make can be certain to the centimeter. It is used to measure the things in meters and centimeters. For example: Length of a table or the width of a bag can be measured by using a meterstick.
To know more about length here
https://brainly.com/question/30100801
#SPJ4
In the following pair, which species would you expect to be the stronger Lewis acid?
a Cu+
b Cu2+
from the given pair, Cu 2+ is the specie that would you expect to be the stronger Lewis acid- Cu 2+
A Lewis acid is a chemical species that can accept a pair of electrons to form a covalent bond. It is named after Gilbert N. Lewis, who first proposed the concept in 1923. In general, a Lewis acid can be any atom, ion or molecule that has an empty orbital that can accept an electron pair from a Lewis base. The Lewis base is a species that can donate a pair of electrons to form a covalent bond.Examples of Lewis acids include metal cations, such as Al3+ and Fe3+, and neutral molecules that have a vacant orbital, such as BF3 and AlCl3. Inorganic compounds like H+ and boron trifluoride (BF3) are also examples of Lewis acids. It is important to note that the Lewis acid-base theory is an extension of the Bronsted-Lowry acid-base theory. This theory only considers the transfer of protons, but Lewis theory consider electron pair transfer.
To learn more about Lewis acid here:
https://brainly.com/question/15570523
#SPJ4
The transfer of energy from one region of the atmosphere to another is of great importance in meteorology for it affects the weather. Calculate the heat needed to be supplied to a parcel of air containing 1. 00 mol air molecules to maintain its temperature at 300 K when it expands reversibly and isothermally from 22 dm3 to 30. 0 dm3 as it ascends
Energy transfer from one region of the atmosphere to another is critical in meteorology because it affects the weather.
What is Meteorology?
Meteorology is the science of studying the atmosphere and its phenomena such as weather, climate, and air pollution. It is a branch of the atmospheric sciences and studies the physical processes that make up the atmosphere and how the atmosphere affects the Earth and its inhabitants.
The amount of heat needed to be supplied to the parcel is given by the equation:
Q = nRT∆V
Where n is the number of moles of air, R is the ideal gas constant, T is the temperature in Kelvin and ∆V is the change in volume.
Therefore, the amount of heat needed to be supplied to the parcel is given by:
Q = (1.00 mol)(8.314 J/molK)(300 K)(30.0 dm3 - 22.0 dm3)
Q = 4, 573.2 J.
This is important because it demonstrates the amount of energy that must be supplied in order to keep the parcel of air at a constant temperature as it expands. Without this energy, the temperature of the parcel would decrease as it expands, resulting in a change in its weather patterns.
Hence, the amount of heat needed is: Q = 4, 573.2 J.
To know more about Meteorology,
https://brainly.com/question/11304547
#SPJ4
What is the function of a climograph?
Answer:
A climograph is a graphical representation of the climate of a particular location over a period of time. It typically shows the average temperature and precipitation for a specific location over the course of a year, with the temperature plotted on the y-axis and the months of the year plotted on the x-axis.
The primary function of a climograph is to provide a visual representation of the climate of a particular location, which can be useful for understanding the weather patterns and temperature ranges that are typical for that location. Climographs can also be useful for comparing the climate of different locations, as they provide a convenient way to see how temperature and precipitation patterns differ from one place to another.
What happens to the molecules in the room as they change from a liquid to a gas?
When a liquid changes to a gas, the molecules in the room gain enough energy to break the bonds that hold them together in the liquid state.
What are Molecules?
Molecules are the smallest unit of matter that still has the properties of a particular substance. They are made up of two or more atoms that are bonded together. Molecules can be covalent, meaning the atoms in the molecule share electrons, or ionic, meaning one atom has donated electrons to the other.
This energy comes from an increase in temperature, which causes the molecules to move faster and farther apart. As the molecules move around and expand, they fill the room with a vapor or gas.
To know more about molecules,
https://brainly.com/question/26044300
#SPJ4
The solid has a mass of 180 g. What is the density of the solid? Show your work. Be sure to use correct units of measurement. HELP NEEDED ASAP!!!!
Answer:
I'm telling the teacher on u man stop cheatingIdentify the Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ? Pt(NH3)4,2+(aq)
a) Pt2+
b) NH3
c) Pt(NH3)4,2+
The Lewis acid in the following reaction: Pt2+(aq) + 4NH3 (aq) ?Pt(NH3)4,2+(aq) is : a) Pt2+.
What do you understand by a Lewis acid?Platinum ion (Pt2+) ( P t 2 + ) is a Lewis acid in the given reaction because it accepts pair of electron from ammonia.
A Lewis acid is any substance, such as H+ ion, that can accept a pair of nonbonding electrons. In other words, Lewis acid is an electron-pair acceptor. Lewis acid is chemical species that has an empty orbital which is capable of accepting electron pair from Lewis base to form a Lewis adduct.
To know more about Lewis acid, refer
https://brainly.com/question/12326649
#SPJ4
What are the two factors that affect the arrangement of particles in a substance?
The two factors that affect the arrangement of particles in a substance are kinetic energies and intermolecular forces.
In chemistry, all the substances are composed of tiny particles which are in constant motion.
The substance which is made up of atoms, ions or molecules, all the particles possess kinetic energy and keep moving in all direction. On the other hand, intermolecular forces are also present in a substance which keeps the particles together within their boundaries and doesn't let them go far away. In this way substances maintain their shape, arrangement and properties.
In sum, two factors play a crucial role in maintaining the properties of a substance: Kinetic energy and intermolecular forces.
If you need to learn more about substance click here:
https://brainly.com/question/24647756
#SPJ4
How many times more acidic is a solution with a pH of 2 compared with one with a pH of 5 Explain.
pH is a logarithmic scale.This implies that the acidity (H + concentration) changes by 10 times for each pH variation of one digit. For instance, a pH 4 solution contains 10 times more H + than a pH 5 solution. Since a pH 3 solution is 100 times more acidic than a pH 5 solution, it will contain 100 times more hydrogen ions (H +).
What is the pH scale?A water-based solution is described by its pH value. In general, an acidic solution is one with a small pH value, and an alkaline solution is one with a larger pH value (more basic). Since the pH scale is symmetrical around 7, a solution with a pH of 7 is completely neutral (neither acidic nor basic). Figure 1 displays a few instances of typical compounds and where they fall on the pH scale.
The concentration of hydrogen ions (H+) in a solution is directly measured by the pH value of the solution. Acids have high H+ concentrations, which results in low pH levels. There is hardly any H+ in bases. Large pH values, greater than pH 7, are present in basic liquids.
Learn more about pH scale here: https://brainly.com/question/1596421
#SPJ1
Fe(OH)3
⎯⎯→
Fe2O3
⎯⎯→
Fe
⎯⎯→
FeCl2
⎯⎯→
Fe(OH)2
Answer:
decomposition reaction
Ex: Mg + 2HCl—-> MgCl₂ + H₂ If 4.48L of H₂ gas at STP is
produced in 40 sec, what is the reaction rate in mol/sec?
Answer:
The reaction rate in mol/sec is 0.005.
Explanation:
To determine the reaction rate in mol/sec, you need to first determine the number of moles of H₂ gas produced in the reaction. The volume of a gas at STP (standard temperature and pressure) is directly proportional to the number of moles of the gas, so you can use the volume of H₂ gas produced to calculate the number of moles.
At STP, 1 mole of a gas occupies a volume of 22.4 L. Therefore, the number of moles of H₂ gas produced in the reaction can be calculated as follows:
moles H₂ = 4.48 L / 22.4 L/mol = 0.2 mol
To determine the reaction rate in mol/sec, you need to divide the number of moles of H₂ gas produced by the time it took for the reaction to occur:
reaction rate (mol/sec) = 0.2 mol / 40 sec = 0.005 mol/sec
So, the reaction rate in mol/sec is 0.005.
A 1. 15 x 104 mg block of metal has the following dimensions: 0. 5839 inches by 0. 531 inches, by 0. 4981 inches. Determine the density of the block in g/cm3. Using the provided list of metals and their respective densities, what is the metal's identity
The block has a density of 7.3 g/ml. The density is the same as for tin. Tin is the metal's true identity.
Absolute population and particle density are the two main types of density. Relative density, also called as coarse aggregate, is the ratio of a substance's density to the volume of a reference substance. The reference substance is often water.
The density of a substance is a measurement of its thickness in relation to its volume. A product will float in a solution if its density is lower than the water's, while it will sink if it has a higher density.
Density of the block can be calculate as follows:
Volume of metal = 1xb×h
I = 0.5839 in
b = 0.531 in
h = 0.4981 in
volume = 0.5839×0.531×0.4981
=0.1544363
=2.53ml
mass of metal =1.84×10⁴ mg
=18.4 g
density = g/ml
=18.4/2.53
=7.3 g/ml
from its density we can conclude the block of metal is Tin
To know more about density visit:
brainly.com/question/29775886
#SPJ4
Chlorine dioxide, ClO2, si a reddish-yellow gas that is soluble in water. In basic solution it gives ClO3- and ClO2- ions. 2ClO2(aq) + 2OH-(aq) ?
ClO3-(aq) + ClO2- (aq) + H2O. To obtain the rate law for this reaction, the following experiments were run and, for each, the initial rate of the reaction of ClO2 as determined. Obtain the rate law and the value of the rate constant
Chlorine dioxide is a powerful oxidizing agent and disinfectant used to sanitize and disinfect water, air, surfaces, and medical equipment.
What is Chlorine?
Chlorine is a chemical element found in the halogen group on the periodic table. It has the atomic symbol Cl, and its atomic number is 17. Chlorine is a pale green gas at room temperature, and it is highly reactive. Chlorine is widely used in water treatment and in the production of cleaning products, plastics, and pesticides.
The rate law for this reaction is rate = k[ClO2][OH-], where k is the rate constant. To calculate the rate constant, we can use the following equation:
k = (rate2 - rate1)/([ClO2]2 - [ClO2]1)([OH-]2 - [OH-]1)
Substituting the values for experiments 1 and 2, we get:
k = (0.00276 - 0.0248)/((0.020 - 0.060)(0.030 - 0.030)) = -0.142
The value of the rate constant is k = -0.142 mol/((L s)mol2).
To calculate the initial rate of reaction in experiment 4, we can use the following equation:
rate = k[ClO2][OH-]
Substituting the values for experiment 4, we get:
rate = -0.142(0.040)(0.060) = -0.0043 (mol/((L s))
To know more about Chlorine,
https://brainly.com/question/24218286
#SPJ4
What is the density of object A (give 2 sig figs)?
The mass of the object compared to its volume
How do you calculate an object’s density?The density of an item is defined as its mass divided by its volume. Density is commonly expressed in grams per cubic centimeter (g/cm3). Remember that grams are a unit of mass and cubic centimeters are a unit of volume (the same volume as 1 milliliter).
When multiplying or dividing, the result should have the same number of significant digits as the number in the computation that has the fewest. This is the volume measurement with only two sig figs in this case, hence the density should be given as 2.9 g/cm3. The density of an item is the ratio of its mass to its volume. Density is defined as density = mass/volume, or D = m/v.
To learn more about density to refer:
https://brainly.com/question/29775886
#SPJ1
Why does the water creep up the paper? Explain this. Draw the molecular interactions associated with the macroscopic observation.
( I only need the drawing to be honest and I would really appreciate it if you could explain it)
Capillary action involves the hydrogen bonding in water.
What is capillary action?We have to note that when we are talking about capillary action, what we mean is the movement of water up the paper. We know that this movement of water would have a lot to do with the kind of intermolecular interaction that is going on.
Note that the water is composed of polar O-H bonds that can be able to interact with the -OH bonds that can be seen in the cellulose that is water and this accounts for the capillary action in water.
Learn more about capillary action:https://brainly.com/question/13228277
#SPJ1
PLEASE HELP ASAP!!!!
A law summarizes a set of observations about an experiment.
What exactly does the word law mean?Chemical law: Most of the properties and the atomic structure of the elements vary periodically when the elements are arranged in the order of their atomic numbers.
A sound explanation for observations is referred to as a theory. A summary of the relationship between variables constitutes a scientific law. A controlled method of testing a hypothesis is through an experiment.
The fundamental chemistry laws in chemistry are considered to be the following three: the mass conservation principle. the principle of proportional equality. A multiple proportions law.
To know more about chemical law visit:
https://brainly.com/question/29640690
#SPJ1
How many moles in 28 grams of UO22- ?
The amount, in moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.
Moles determinationThe mole of a substance is the ratio of the mass of the substance and the molar mass of the substance. This can be mathematically expressed as:
Mole = mass/molar mass
Molar mass of [tex]UO_2[/tex] = 238 + (16x2) = 270 g/mol
Thus, the number of moles in 28 grams of [tex]UO_2[/tex] would be:
Mole = 28/270 = 0.1037 mol
In other words, the number of moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.
More on moles determination can be found here: https://brainly.com/question/14256491
#SPJ1
How many moles in 28 grams of UO2?
Who first identified the element radium? charles richard drew enrico fermi jonas salk marie curie
Marie Curie is credited with the discovery of radium. In 1898, she and her husband Pierre Curie discovered the element while experimenting with pitchblende, an ore containing uranium. They isolated a new substance, which they named radium, after the Latin word for ray.
What is uranium?Uranium is a naturally occurring element that is found in rocks and soil. It is a dense, silvery-white metal that has the highest atomic weight of all elements. Uranium is slightly radioactive and produces energy when it undergoes nuclear fission. It is an important source of energy generation and is used in nuclear reactors to produce electricity. Uranium also has a variety of other uses, such as in military applications, medical imaging, and industrial processes. It is a nonrenewable resource, and its supply is limited. Due to its radioactive nature, uranium must be handled with caution and special safety precautions must be taken to protect against the radiation it
To learn more about uranium
https://brainly.com/question/29234132
#SPJ4
Answer: its D- Marie Curie
Explanation: I got it right on the test! hope this helps :)
What does the sun shape indicate?
The Sun is a close second in terms of object radii. It would be so spherical if shrunk to the size of a beach ball that the distance between its widest and narrowest diameters would be significantly smaller than the width of a human hair.
What does the sun symbolize?Our world is greatly influenced by the sun, which controls the weather, ocean currents, seasons, and climate as well as enabling plant life through photosynthesis. Life on Earth would not live without the heat and light provided by the sun.
Because they developed and collapsed under the force of their own gravity, the Sun and the majority of other big objects in space, including stars, planets, and large moons, are spherical. When our Solar System first formed, it was a massive, whirling cloud of gas and dust that gradually shrank due to gravity.
Thus, The Sun is a close second in terms of object radii.
To learn more about the sun, follow the link;
https://brainly.com/question/17376727
#SPJ1
The fluid-filled interior compartment of the thylakoid network is referred to as the:
A. cytoplasm.
B. intermembrane space.
C. lumen.
D. grana.
E. stroma.
The fluid-filled interior compartment of the thylakoid network is referred to as the: Lumen
The thylakoid lumen is an aqueous phase that is continuously enclosed by the thylakoid membrane. It is essential for photophosphorylation during photosynthetic activity. Protons are hyped across the thylakoids into the lumen during the light-dependent reaction, making it acidic down to pH 4. The lumen in the chloroplast is referred to as the stroma. The stroma is the whitish fluid that surrounds the grana (thylakoids stacks) within the chloroplast. A lumen is the chloroplast membrane that surrounds space. Light energy is captured by photosystems found in thylakoid membranes. The thylakoid membrane contains enzymes required for photosynthesis's light-dependent reactions. Hydrogen ions are pumped into the thylakoid space, or lumen, during these reactions.The thylakoid space has an acidic pH due to the high concentration of hydrogen ions.
Learn more about chloroplast here:
https://brainly.com/question/11136550
#SPJ4
What is iupac name of this compound
Answer:
Explanation:
The lupac name of this compound is 2-Oxohexanoic acid. This compound is composed of two oxygen atoms, six carbon atoms, and one hydrogen atom. The parent chain is made up of six carbon atoms, and the functional group is a carboxylic acid group (COOH)
Has 13 protons and 14 neutrons what is its mass number?
An atom that has 13 protons and 14 neutrons will have mass number 27.
Rutherford demonstrated that an atom's nucleus, which is made up of protons and neutrons, contains the vast bulk of the atom's mass. The total number of protons and neutrons in an atom is referred to as the mass number. The number of protons(atomic number) and neutrons and their sum can be used to compute it.
We know that,
Mass number = Number of protons + Number of neutrons
= 13 + 14 = 27.
The mass number is 27.
Therefore an atom that have 13 protons and 14 neutrons will have mass number 27.
Learn more about mass number at https://brainly.com/question/14089559
#SPJ4
Iron objects such as storage tanks and underground pipelines can be protected from corrosion by connecting them through a wire to a piece of : Ag
Pb
Sn
Mg
Cu
Iron objects such as storage tanks and underground pipelines can be protected from corrosion by connecting them through a wire to a piece of Mg.
General corrosion happens when the majority or even all atoms on such a metal surface become oxidized, causing the surface to corrode completely. The majority of metals were easily oxidised, which means they frequently lose oxygen electrons (among other elements) in the air either in water. Oxygen joins with the metal to produce an oxide as it becomes reduced (gains electrons).
A refined metal usually transformed naturally by corrosion into a safer stable chemical form, including its oxide, hydroxide, and sulphide. By reacting chemically and/or electrochemically with their surroundings, materials slowly degrade. Additionally, it gradually eliminates the element using chemical processes.
To know more about corrosion
https://brainly.com/question/30057568
#SPJ4
Are used for energy storage to build structures and as signal molecules to help cells communicate with each other
Yes, carbohydrates are used for energy storage to build structures, and as signal molecules to help cells communicate with each other.
Carbohydrates and functionsCarbohydrates are molecules that consist of carbon, hydrogen, and oxygen atoms and can be broken down by the body to provide energy. They are used to build the structural components of cells, such as the cell walls and membranes, and are also used as signal molecules between cells. As signal molecules, they can help cells communicate with each other and respond to changes in the environment.
Learn more about Carbohydrates: https://brainly.com/question/797978
#SPJ4
what are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?
The two portions on this module for which we can broaden unit elements to do dimensional analysis with chemical materials are volume and mass.
volume is a degree of the quantity of three-dimensional space occupied by using an object or substance. it's miles regularly measured in liters, cubic centimeters, or cubic meters. volume is used to measure the potential of a field, the dimensions of an object, or the quantity of liquid or gas in a given space. it's also used to determine the mass of an item, because the density (mass in line with unit quantity) is often acknowledged.
the 2 portions of volume and mass are critical for doing dimensional analysis with chemical substances because they help to measure the amount of a substance in distinct gadgets. extent is vital for measuring the quantity of liquid materials, and mass is critical for measuring the quantity of strong substances. each of these portions are vital for accurate and specific measurements of chemical substances, making them crucial for dimensional analysis.
To know more about chemicals click here
https://brainly.com/question/26487468
#SPJ4