Suppose a runner completes a 10K (10.0 km) road race in 45 minutes and 35 seconds.

What is the runner's average speed in miles per hour?

Answer: D

Explanation: Cause im always right

The product of the single displacement reaction between Al₂S₃ and Li are Li₂S₃ and Al because metals replaces metals.

Displacement reactions are those, in which one or two species are displaced from a reactant by the reagent. There are two types of displacement reactions namely single displacement and double displacement.

In single displacement reactions, one atom or group from a reactant is replaced by other group. In double displacement, two group of different reactants are exchanged each other.

The reaction between Al₂S₃ and Li is written below:

[tex]\rm Li + Al_{2}S_{3} \rightarrow Li_{2}S_{3} + 2 Al[/tex]

Here, metal Li replaces metal Al. Thus, option A is correct.

To find more on displacement reactions, refer here:

https://brainly.com/question/29307794

#SPJ1

ELISA (enzyme-linked immunosorbent assay) does not allow for rapid screening and quantification of the presence of antigen in a sample.

Enzyme linked immunosorbent assay is the immunosorbent test that is connected with enzymes. For identifying the antibody in the blood, a standard laboratory test is performed.

The body's immune system creates an antibody when it recognizes harmful substances which is also known as antigens. The most common assay for detecting or diagnosing viral infection or particularly infection with blood-borne viruses which includes HBV, HCV, HIV, and HTLV, is the enzyme linked immunosorbent assay (ELISA). The basis of ELISA testing is interaction of  antigen-antibody.

Learn more about ELISA from the link given below.

https://brainly.com/question/13252906

#SPJ4

Considering the definition of percent yield, the percentage yield of the reaction is 68.18%.

To determine the efficiency of a reaction, the percent yield is used, which describes the ratio of the actual yield to the theoretical yield.

The percent yield is calculated as the experimental yield divided by the theoretical yield multiplied by 100%:

percent yield= (actual yield÷ theoretical yield)× 100%

where:

In this case, you know:

Replacing in the definition of percent yield:

percent yield= (15 g÷ 22 g)× 100%

Solving:

percent yield= 68.18%

Finally, the percentage yield is 68.18%.

Learn more about percent yield:

brainly.com/question/14408642

#SPJ1

A net ionic equation for the reaction is :

Cu(s)  + 2H⁺(aq) ---->  Cu²⁺(aq)  + H₂(g)

The reaction of Cu with HBr is given as :

Cu(s) + HBr(aq) --->  CuBr₂(aq)   +  H₂(g)

to balance the equation multiple 2 in HBr , we get the balance equation :

Cu(s) + 2HBr(aq) --->  CuBr₂(aq)   +  H₂(g)

write the complete ionic equation :

Cu(s)  + 2H⁺(aq)  +  2Br⁻(aq) ----->  Cu²⁺(aq)  + 2Br⁻(aq) + H₂(g)

now, cancel out the spectator ion from the equation, spectator ions are the same ion in the reactants and product side, we get :

Cu(s)  + 2H⁺(aq) ---->  Cu²⁺(aq)  + H₂(g)

Thus, this is the net ionic equation of the reaction.

To learn more about net ionic equation here

https://brainly.com/question/26392265

#SPJ4

The theoretical yield of the reaction between 6.20 g of carbon with excess oxygen is 22.7 g. The actual yield is given 8.35 g. Thus, the percent  yield is 36.7 %.

Percent yield of a reaction is the ratio of its actual yield to the theoretical yield multiplied by 100. The theoretical yield is calculated from the balanced chemical equation of the reaction.

One mole or 12 g of C gives one mole of carbon dioxide. Molar mass of CO₂ is 44 g/mol. Thus, the mass of carbon dioxide that can be produced from 6.20 g of C is :

= (6.20 × 44 ) / 12 g = 22.73 g.

The actual yield of CO₂ is 8.35g only. Thus, its percent yield is calculated as :

percent yield = 8.35 g/ 22.73 g × 100 = 36.7 %.

To find more on percent yield, refer here:

https://brainly.com/question/2506978

#SPJ1

The new concentration (molarity) of the solution is 0.5M.

According to this question, Sam pipettes dilutes 10ml of a 1.5 M AgNO3 solution with water until the final volume is 30 ml.

Formula =

C1V1 = C2V2

Where;

1.5 × 10 = 30 × C2

15 = 30C2

C2 = 15/30 = 0.5M

Therefore, the new molarity of the solution is 0.5M.

What is concentration in chemistry?

A measure of the concentration of a chemical variants, in peculiar of a solute in a solution, in terms of amount of object per unit volume of solution is called concentration. Its also called molarity, amount concentration or substance concentration.

To know more about concentration, visit:-

https://brainly.com/question/21841645

#SPJ1

The new pressure is 1.78 atm.

What Are The Gas Laws

The gas laws were developed in the early 17th century to help scientists determine volumes, amounts, pressures, and temperatures when it comes to gas-related issues. Three fundamental laws—Charles' Law, Boyle's Law, and Avogadro's Law—make up the gas laws (all of which will later combine into the General Gas Equation and Ideal Gas Law). The relationship between pressure, temperature, volume, and amount of gas is found using the three basic gas laws.

At initial, the pressure (Pi) is 0.80 atm.
At initial, the temperature (Ti) is (20+273)K that, is 293 K
The final temperature (T2) is (380+273)K that, is 653 K
Then, at constant volume:

P1/T1 = P1/T2
0.80/293 = P2/653
P2= 1.78

Therefore, the new pressure (P2) is 1.78 atm

To know more about Boyle's Law, click the given link

https://brainly.com/question/12817429

#SPJ1

The light -dependent stage of photosynthesis contain the absorption of light via  pigments consisting chlorophyll and the switch of electrons from water to generate ATP and NADPH. These reactions arise in the  thylakoid membranes of the chloroplasts and also are referred to as the Hill response or the electron transport chain. Key phrases related to the light dependent stage are:

The light-independent reactions of photosynthesis, additionally referred to as the Calvin cycle or the carbon fixation cycle, contain the conversion of carbon dioxide into glucose and different natural compounds by the usage of the energy saved in ATP and NADPH. These reactions arise in the stroma of the chloroplasts. Key phrases related to the mild-unbiased reactions include:

Read more about photosynthesis at:

brainly.com/question/26494694

#SPJ4

Answer:

Oxidation is the loss of electrons or an increase in the oxidation state of a chemical or atoms within it.

Iron is oxidized to form the iron oxide known as rust.

The limiting reagent is O₂.

Reagents are substances used to facilitate or accelerate chemical reactions. They can be either synthesized in the laboratory or found naturally. Reagents can also serve as catalysts, solvents, buffers, surfactants, and/or scavengers. They are essential components of most chemical processes, enabling scientists and engineers to control and manipulate reactants and products. Reagents are also used to detect, measure, and identify substances in a variety of analytical procedures.

a. The limiting reagent is O₂. This is because there is less moles of O₂ than P4, so O₂ will be used up faster and will be the first reactant to be completely used up.
b. 24.2 mol of O₂ will react with 8.24 mol of P4, producing 16.16 mol of P₂O5 (s).
c. 16.16 mol of P₂O5 (s) will produce 143.1 g of P₂O5 (s). This is calculated by using the molar mass of P₂O5 (s): 143.1 g/mol.

To learn more about reagent
https://brainly.com/question/26905271
#SPJ1

Answer:

H-Cl reperesents polar bond.

Explanation:

Because H and Cl atoms have diffrent dipole moment so they cannot cancel out each other.

Strong nucleophile Sodiumbutyne reacts with 4-bromobutanol to produce a nucleophilic substitution reaction.

Nucleophilic substitution reaction is defined as a series of reactions where a positively charged electrophile is attacked by an electron-rich nucleophile to remove a leaving group.

This causes the mass of the product to increase with the addition of more carbon atoms. The strong base sodiumbutyne reacts with the alcohol's hydrogen to produce an acid-base reaction. Consequently, lower mass product alkyne is formed.

Thus, strong nucleophile Sodiumbutyne reacts with 4-bromobutanol to produce a nucleophilic substitution reaction.

To learn more about nucleophilic substitution reaction, refer to the link below:

https://brainly.com/question/4699407

#SPJ1

The important technique not for experiment is performing a flame test.

One of the most frequently employed analytical techniques in chemistry is the flame test. It is primarily used to observe and examine the presence of specific elements in the given compound or salt.

The flame test typically looks for the presence of metal ions in a compound.

Every element has a different flame test because each element's ions have unique characteristics depending on their emission spectrum.

This distinction can be seen in the color of the flames that are produced when burning salt that contains metal ions.

It should be noted that atoms, not ions, are present in the emission spectrum of each element that determines the flame color in this case.

The visible color lines that are seen in flame tests are frequently the result of the electrons in the ions undergoing a transformation.

To learn more about flame test -

https://brainly.com/question/6357832

#SPJ4

the correctly describes the factor that lead to a ligand being strong field is [Co(en)3]^3+  .

Enable Complete Solution (Free)CN- is the right response.Major points.The strongest field ligand among the offered ligands is the CN- (negative) ligand, which has the highest value of.

So, we anticipate that the metal-ligand orbital overlap will be correlated with the ligand field strength.Thus, weak field ligands are anticipated for ligands that bind through highly electronegative atoms like O and halogens, whereas strong field ligands are often expected for ligands that bind through C or P.N-binding ligands have intermediate binding energies.

To know more about spectrochemical series visit:

https://brainly.com/question/28294176

#SPJ4

The molecular formula of the given compound will be C₃H₅O₂Cl.

The empirical formula can be described as the simplest ratio of the number of different atoms in a compound. The molecular formula gives the actual number of each different atom of each element present in a molecule.

The molecular formula is generally a multiple of the empirical formula of a compound.

Given the molar mass of the compound is 108.5 g/mol

The empirical formula of the compound is C₃H₅O₂Cl.

The empirical formula mass = 12 × 3 + 5×1 + 2×16 + 35.5 = 108 g

Therefore, n = 108/108 = 1

The molecular formula = (C₃H₅O₂Cl)₁ = C₃H₅O₂Cl

Learn more about the empirical formula, here:

brainly.com/question/14044066

#SPJ1

117 grams of NaCl are needed to prepare 0.500 L of a 4.00 M  NaCl solution.

needed to prepare 0.500 L

to find the molecular mass of NaCl from the periodic table.

The mass of Na is about 22.99 g and Cl is about 35.45 g.

The total mass of NaCl is 22.99 + 35.45 = 58.44 g.

Now we need to use the conversion factor from the definition of a mole : 1 mole NaCl = 58.44 g NaCl

We do not have moles yet so we need to find the moles from using molarity and 0.500L.

To find moles from molarity the equation is : moles = volume (L) x Molarity (moles/L)

So we substitute 0.500 L x 4 (moles/L) = 2 moles NaCl

Now we have moles and can convert them to grams :

2 moles x (58.44 g / 1 mole) = (2 x 58.44) / 1

116.88 grams NaCl

≅ 117 grams NaCl.

117 grams of NaCl are needed to prepare 0.500 L of a 4.00 M NaCl solution.

To learn more about molarity refer,

https://brainly.com/question/26873446

#SPJ1

The acidic hydrogen atom in any carboxylic acid is attached to oxygen atom in the cooh group.

Carboxylic acids are organic compounds containing a carboxyl group, which is a functional group consisting of a carbonyl group (C=O) bonded to a hydroxyl group (–OH). They are found in nature in the form of fatty acids, amino acids, and carbohydrates. Carboxylic acids are often used in the production of polymers, fabrics, solvents, and surfactants. They have a wide range of applications, from pharmaceuticals to food additives. Carboxylic acids are also used in the production of chemical intermediates and as precursors to other compounds. Carboxylic acids are distinguished from other acids by the presence of a carbon atom bonded to an oxygen atom and a hydroxyl group. The acidic properties of carboxylic acids are due to the presence of the carboxyl group, which is highly polar and can form hydrogen bonds with other molecules.

To learn more about carboxylic acid
https://brainly.com/question/26855500
#SPJ4

The measured cell potential would be decreased to 0.01% if the salts are the conducting and spontaneous with a standard potential 0.59eV.

The potential difference between two half cells in an electrochemical cell is measured as the cell potential, or Ecell. The electrons ability to move from one half cell to the other is what causes the potential difference.

Due to the fact that the chemical reaction is a redox reaction, electrons can move between the electrodes. When one substance is reduced while another is oxidized, a redox reaction takes place.

As a result of losing one or more electrons during oxidation, the substance gains a positive charge. On the other hand, the substance picks up electrons during reduction and becomes negatively charged.

Cell potential = E-e

=2.18-4.19=-1.01eV

The difference between the potential for the reducing agent to become oxidized and the potential for the oxidizing agent to become reduced will determine the cell potential, which is relevant to the measurement of the cell potential.

A specific value can be assigned to the cell potential because the cell potential (Ecell) is measured in voltage (V).

Standard reduction potential =Ecell/2

=1.18/2=0.59eV

To study more about electrochemical cell -

https://brainly.com/question/12034258

#SPJ4

The number of moles of gas in the given sample is equal to 3.324 mol.

The ideal gas law can be demonstrated as an equation representing the behavior of a perfect gas. The product of the volume and pressure (P) is equal to the multiplication of the gas constant (R), moles of gas, and absolute temperature.

The ideal gas equation for a gas can be written as shown below:

PV = nRT

Where n is the moles, P is the pressure,  V is the volume of the gas,  T is temperature and R is the gas constant.

Given, the volume of gas, V = 76.87 L

The temperature of the gas, T = 40.04°C =  40.04 + 273 = 313.04 K

The pressure of the gas, P = 1.11 atm

Substituting the values T, V, R, and P in the gas equation, we will get:

The number of moles of the given gas sample, n = PV/RT

n = 1.11 ×76.87/(0.082 × 313.04)

n =3.324 mol

Learn more about ideal gas equation, here:

brainly.com/question/3637553

#SPJ1

Answer: hahahaha okay this is the explanation:

Explanation:

To find the value of x in the empirical formula PbC₂Hx, we can use the percentage compositions of carbon and hydrogen to determine the mole ratios of C and H in the compound.

First, we need to convert the percentage compositions of C and H to mass compositions. To do this, we can divide the percentage compositions by the atomic masses of C and H:

C: 29.7% / 12.01 g/mol = 2.47 g C/mol C

H: 6.19% / 1.01 g/mol = 6.11 g H/mol H

Next, we can divide the mass compositions of C and H by their respective atomic masses to get the number of moles of C and H:

C: 2.47 g C / 12.01 g/mol = 0.206 mol C

H: 6.11 g H / 1.01 g/mol = 6.03 mol H

Since there are 2 moles of C and x moles of H in the compound, we can set up the following equation:

2 mol C / 0.206 mol C = x mol H / 6.03 mol H

Solving for x, we get:

x = 6.03 mol H * 2 mol C / 0.206 mol C

= 29.4 mol H

Since x represents the number of moles of H, the closest integer value is 29. Therefore, the value of x in the empirical formula PbC₂Hx is 29, and the correct answer is D) 20.

The amount of solution (g or mL) that contains each of the following amounts of solute is 11.56 grams.

What is amount of solute?

The amount of a solute that will dissolve in a specific amount of solvent to create a saturated solution is the solute's solubility.

The amount of solution is calculated as

[tex]% of m/m=\frac{x}{y} mass[/tex][tex]% of m/m= \frac{mass}{mass}[/tex]% of m/m= mass of LiNO3/mass of solution.100

mass of solution=mass of LiNO3/[tex]% of m/m=\frac{x}{y} mass[/tex][tex]% of m/m= \frac{mass}{mass}[/tex]% of m/m.100

Therefore, mass of solution is calculated as

= 5.2 grams.100/45%

= 11.56 grams Solution LiNO3.

Hence, the amount of solution (g or mL) that contains each of the following amounts of solute is 11.56 grams.

To learn more about amount of solute from the given link.
https://brainly.com/question/28905274
#SPJ1

There are several factors that can contribute to the speed of an object, including its mass, shape, and the surface it is moving on. In general, slimmer objects tend to go faster than objects with more structure because they offer less resistance to movement, which allows them to accelerate more quickly and reach higher speeds.

One factor that can affect the speed of an object is its mass, or the amount of matter it contains. All other things being equal, an object with a lower mass will tend to be faster than an object with a higher mass, because it has less matter to move and therefore requires less energy to accelerate.

Another factor that can affect the speed of an object is its shape, or the way it is structured. Slimmer objects tend to be more streamlined, meaning they have a shape that allows them to move through the air or water with less resistance. This can allow them to go faster than more structured objects, which may have a shape that creates more drag or resistance to movement.

Finally, the surface an object is moving on can also affect its speed. For example, an object moving on a smooth, flat surface may be able to go faster than an object moving on a rough or uneven surface, because the smooth surface offers less resistance to movement.

Overall, the speed of an object is determined by a combination of these and other factors, including the force applied to the object and the level of resistance it encounters. Slimmer objects tend to go faster than objects with more structure because they offer less resistance to movement, which allows them to accelerate more quickly and reach higher speeds.

The importance of knowing chemical reactions to engineers is this information can be utilized to improve reactor design or operating circumstances such as feed flow rate and feed mix.

Breaking carbon-carbon bonds between the reactant molecules (particles) and creating new bonds between atoms in product particles are examples of chemical reactions (molecules). The number of atoms is the same before and after the chemical transition, but the number of molecules changes.

Therefore, chemical reactions are important to engineers because they can be used to improve reactor design or operating conditions such as feed flow rate and feed mix.

To learn more about chemical reactions, refer to the link:

https://brainly.com/question/20880185

#SPJ1

A carbohydrate with two sugar units would be a(n) oligosaccharide. Correct answer: letter D.

This is because an oligosaccharide is a carbohydrate that contains two to ten sugar molecules, making it a carbohydrate with two sugar units.

Are a type of organic compound found in living things. They are composed of carbon, hydrogen and oxygen in the ratio of C:H:O = 1:2:1. Carbohydrates are the main source of energy for the body and are found in many foods, such as:

They can be further divided into simple carbohydrates, such as sugar, and complex carbohydrates, such as starch.

Learn more about carbohydrates:

https://brainly.com/question/336775

#SPJ4

The options B, C and D, are the statements that correctly describe van der Waals radii.

Van der Waals radii are an important concept in chemistry, as they provide insight into how atoms interact with one another. Put simply, van der Waals radii are the distance between two covalently bonded nuclei. These radii are used to determine how close any two molecules can approach each other, and this information is essential for understanding how atoms in a molecule interact and behave.

In general, van der Waals radii increase from left to right across a period in the periodic table. This means that atoms located on the left-hand side of the table have smaller radii than those located on the right-hand side. This is due to the fact that the number of electrons in each atom increases as you move across the period.

Additionally, the van der Waals radius for a given atom is always larger than its covalent radius. This is because the van der Waals radius takes into account the non-bonded interactions between atoms, which can be attractive or repulsive.

Learn more about Van der Waals radii:

https://brainly.com/question/17998146

#SPJ4

Answer:

C

Explanation:

[tex]\frac{1}{6}L[/tex] or 166.667 ml of water must be evaporated in order to make this solution 3M.

When the problem states "250ml of 1M Ca(OH)₂", it means that you have 250ml of a solution that contains 1 mole of solute (Ca(OH)₂) for each liter of the solution.

In order to make a 1M solution be a 3M solution, we'll have to remove some of the solvent liquid, in order to make it more concentrated.

The original molarity is: M= Moles of solute (n) / Liters of solution (v).

Since the problem states that the original molarity is 1M, we have 1 mole of solute per liter of solution in the original solution. Therefore, initial molarity is: [tex]M=\frac{1mol}{1liters}=\frac{0.250mol}{0.250L}[/tex]

250ml= 0.250 L.

As you may see, in order to make the molarity fraction equal 3M, we'll have to multiply the numerator by 3 or divide the denominator by the same number:

[tex]M=\frac{0.250mol}{0.250L/3}=\frac{0.250mol}{\frac{1}{12} L}[/tex]

The amount of solution evaporated is given by the difference between the denominator of the molarity of the original expression and the new expression:

[tex](0.250-\frac{1}{12})\\ \\(\frac{3}{12}-\frac{1}{12})L\\ \\\frac{2}{12} L\\ \\\frac{1}{6} L[/tex]

[tex]\frac{1}{6}L[/tex] or 166.667 ml of water must be evaporated in order to make this solution 3M. The ending product will have the following molarity:

[tex]M=\frac{0.250moles}{\frac{1}{12} L} =3M[/tex].

A stimulus has opened the voltage-gated sodium channel in an area of a neuron's plasma membrane. As a result, sodium rushes into the neuron and diffuses to adjacent areas; this in turn results in the opening of voltage-gated sodium channels in the adjacent areas. Thus, option "c" is correct.

When the potential in the membrane rises above the threshold energy, the natrium voltage-gated sodium channels will be opened. The opening of the natrium voltage-gated sodium channels will allow the movement of sodium to the cells. This happens because the concentration of sodium outside the cell is much higher than inside the cells, the sodium will flow into the cells.

Learn more about voltage-gated sodium channels from the link given below.

https://brainly.com/question/12418395

#SPJ4

The state symbols for the reactants, products, and addition are as follows: Mg(s) + H2SO4 (aq) MgSO4 (aq) + H2 (g), where the sole reactants are H+(aq) and Fe (s). H2 is the offered product (g).

Energy is released and the molecules of hydrogen and oxygen can join to generate either water or hydrogen peroxide when the molecules of H2 and O2 are mixed and allowed to react.

The substance or substances to the left of the arrow in a chemical equation are the reactants. Reactants are substances that are present at the beginning of a chemical reaction. The substance or substances to the right of the arrow are products.

To know more about products visit:-

https://brainly.com/question/22852400

#SPJ4