The moment of inertia of one piece is 125 times smaller than the moment of inertia of original bar.
What is moment of inertia?A body's resistance to having the speed of its rotation about an axis changed by the application of a torque is measured by the term "moment of inertia" in physics (turning force). The axis could be fixed or not fixed, internal or external.
Nevertheless, the moment of inertia (I), which is always specified in relation to that axis, is calculated as the sum of the products obtained by multiplying the mass of each particle of matter in a given body by the square of that particle's distance from the axis.
The moment of inertia can be compared to mass in linear momentum when calculating the angular momentum of a rigid body.
Learn more about moment of inertia
https://brainly.com/question/14460640
Calculate the B/CB/CB/C ratio for the following cash flow estimates at a discount rate of 777% per year.Item Cash FlowFW of benefi ts, $ 30,800,000AW of disbenefi ts, $ per year 105,000First cost, $ 1,200,000M&O costs, $ per year 400,000Life of project, years 20
Per year 400,000Life of project, years 20. The discount rate is the interest charge commercial banks and other financial institutions make to the Federal Reserve Bank in order to borrow short-term money. Thus, option D is correct.
What cash flow estimates at a discount rate?The formula for benefit-cost ratio is: Benefit-Cost Ratio = ∑ Present Value of Future Benefits / ∑ Present Value of Future Costs.
A project determined to have exactly equal benefits and costs B/C ratio equals precisely one). A systematic process for calculating and comparing benefits and costs of a project. Measure calculated by dividing the incremental monetized benefits related to a project by the incremental costs of that project.
Therefore, The present value of future cash flows is computed using a rate of return known as the discount rate in a discounted cash flow analysis. An examination of discounted cash flows shows. Per year 400,000Life of project, years 20
Learn more about cash flow here:
https://brainly.com/question/10776890
#SPJ1
an ic with a switching rate of and is dissipating . what will be the power dissipation if we change to and the switching rate to while keeping the activity factor the same?
The power dissipated by a specific circuit element is equal to the product of the current and voltage, or P = I V, if a current I passes through that element while a voltage V is lost in the process.
What change to and the switching rate in power dissipation?In other words, the power dissipated across the load will be at its maximum if the value of load resistance is equivalent to the amount of source resistance, or Thevenin's resistance.
Therefore, P = CV2 f, which states that dynamic power dissipation depends squarely on supply voltage and linearly on frequency, results in a cubic reduction in power consumption when both are scaled back.
Learn more about power dissipated here:
https://brainly.com/question/12803712
#SPJ1
technician a says a torsion bar is a type of shock absorber. technician b says shock absorbers slow the upward and downward movement of the vehicle after a bump. who is correct?
A torsion isn't part of the shock absorber. Hence, technician A is wrong and technician B is correct.
The suspension system allows the wheel to up and down over bumps in the road. The suspension system makes the wheels and tires to up and down to absorb the shock from bumps. The rubber tires and air in the tires also slow down the ride over hard surfaces and conform to slightly uneven and rough surfaces. Thus, technician B is correct. Meanwhile, the technician A is wrong because a torsion isn't kind of shock absorber.
Kind of shock absorbers are:
Standard telescopic shocks. Struts. Spring seat.Learn more about shock absorbers, here https://brainly.com/question/10838031
#SPJ4
technician a uses a small hole gauge and micrometer to measure the inside diameters of small bores. technician b uses a dial caliper to take depth measurements. who is correct?
Both technician A and technician B are correct.
A small-hole gauge is referred to as a measuring tool with a round expandable head. The small-hole gauge is used together with an outside micrometer to measure the inside of small holes. Thus, technician A is correct who uses a small hole gauge and micrometer to measure the 'inside diameters' of small bores.
Depth can be measured using a dial caliper in which the depth rod is inserted into the hole being measured. Hence, technician B is correct who uses a 'dial caliper' to take depth measurements.
You can learn more about small-hole gauge at
https://brainly.com/question/13025850
#SPJ4
n ideal transformer has 20 turns on its primary side and 90 turns on its secondary side. the primary side has 200 volts and 50 amps. what are the voltage and current on the secondary side
Below is the solution of the voltage and current on the secondary side when an ideal transformer has 20 turns on its primary side and 90 turns on its secondary side.
Step-by-step solution -
Given,
[tex]V_{P} = 200V\\N_{P} = 20\\N_{S} = 90[/tex]
For Transformer -
[tex]\frac{V_{P}} {V_{S}} = \frac{N_{P}} {N_{S}}[/tex]
[tex]\frac{200} {V_{S}} = \frac{20} {90}[/tex]
[tex]V_{S} = \frac{1800}{2} = 900 V[/tex]
For Ideal transformer ,
[tex]P_{OUT} = P_{IN}}[/tex]
200 x 50 = 900 x [tex]I_{S}[/tex]
[tex]I_{S}[/tex] = 100/9 A.
What is an Ideal Transformer?
A perfect transformer is one that has no losses, such as copper or core. This transformer's output power is equal to its input power. This transformer's efficiency is 100%, which means there is no power loss within the transformer.
What is a Transformer?
A transformer is a fixed electrical device that is used to transfer electrical energy between two circuits while maintaining a constant frequency and increasing or decreasing the current or voltage.
To know more about Ideal Transformer, visit: https://brainly.com/question/23870167
#SPJ4
given an aligned carbon fiber reinforced composite with a nylon 6,6 polymer matrix, which have tensile strengths of 4000 and 76 mpa, respectively, what volume fraction of fibers are needed to achieve a tensile strength of 200 mpa when a longitudinal load is applied (i.e. load is parallel to the fiber direction)?
[tex]V_{F}[/tex] (Volume Fraction) will be 0.14436 and Tensile strength weill be 620.222 MPa.
What is Tensile strength?
Tensile strength is a material's ability to withstand a pulling (tensile) force and refers to a material's breaking strength when a force capable of breaking many strands of the material simultaneously is applied at a constant rate of extension/load. It is typically expressed in units of force per cross-sectional area.
Tensile strength is the amount of load or stress that a material can withstand before stretching and breaking. Tensile strength, as the name implies, is a material's resistance to tension caused by mechanical loads applied to the material. One of the most important and widely measured properties of structural materials is their ability to resist breaking under tensile stress.
To know more about Tensile strength, visit: https://brainly.com/question/16201534
#SPJ4
in a tandem drive highway tractor with a 4s/4m abs, which axles are usually monitored and modulated?
In a tandem drive highway tractor with a 4S/4M ABS,which axles are usually monitored and modulated by option B) steer axle and rear drive axle.
What is a tandem tractor?A single axle tractor is more likely to only tow a small or medium-sized load compared to its larger counterparts, whereas most double axle or tandem axle tractors are employed to haul exceptionally heavy loads.
It is sometimes known as a tandem, double-bottom, or double-trailer truck. a very long vehicle made comprised of a tractor towing two trailers connected up in a row. a semitrailer made to attach to another component of such a rig.
Therefore, Anti-lock Brake System includes the ABS sensor, sometimes referred to as a wheel speed sensor. It tracks the wheel speed on your automobile, SUV, or truck and is found in the wheel hub. The passenger-side tail shaft housing contains the sensor.
Learn more about tractor from
https://brainly.com/question/21603150
#SPJ1
See full question below
In a tandem drive highway tractor with a 4S/4M ABS,which axles are usually monitored and modulated?
A) both tandem drive axles
B) steer axle and rear drive axle
C) steer axle and front drive axle
What does General Zaroff say that shows he thinks Rainsford is similar to him?
“I’ll tell you”
“You will be amused”
“I have done a rare thing”
“in all modesty”
Answer:
Explanation:
The phrase:
“You will be amused”
He is assuming that Rainsford will enjoy what he is about to show him because he himself enjoys it.
A catalytic converter has to be at least how hot before it begins to work?
Answer:
Normal operating temperatures of a converter are 500-800°F, and up to 1200°F when the vehicle is under heavy load.To melt the catalytic converter's substrate, the temperature inside the converter would have to exceed 2000°F.
Explanation:
technician a says that as the rotational speed of an abs monitored wheel increases, the voltage generated by the wheel speed sensor also increases. technician b says that the frequency produced by a truck abs wheel speed sensor when it is at a standstill should be close to 400 hz. who is correct?
Both the Technician A and Technician B are correct.
How is ABS monitored?As the rotational speed of an ABS-monitored wheel increases, the voltage generated by the wheel speed sensor also increases. This is because the wheel speed sensor is a type of generator that produces a voltage proportional to the speed of the wheel.
As the wheel turns faster, the sensor generates a higher voltage, which is then used by the ABS system to monitor the speed of the wheel and control the brakes as needed.
At a standstill, the wheel is not turning, so the sensor produces a very low frequency signal, typically around 400 Hz. As the wheel begins to turn, the frequency of the signal increases proportionally, providing the ABS system with a measure of the wheel's speed.
To Know More About ABS, Check Out
https://brainly.com/question/8120411
#SPJ1
floyds cycle detection algorithm advantages and disadvantages
The advantage of the Floyd algorithm is its versatility. Numerous problems can be resolved with the algorithm. A disadvantage is the algorithm is quite complex and can be difficult to understand.
What is Floyd's algorithm?Only two pointers—each moving through the succession at a different speed—are used in Floyd's method, which is a pointer-based algorithm. In reference to Aesop's story The Tortoises and the Hare, it is also known as the "turtle and the hare algorithm."
Why Floyd algorithm is used?The Floyd algorithm is applied to find that shortest route via the weighted graph between each vertex. Both direct and undirected graphs can be used with this approach, but the graph having negative cycles cannot be used. Its space complexity is O, and its time complexity is O(N-L), where N represents the number of nodes in the linked list and L is the length of the loop (1).
To learn more about Floyd algorithm visit:
https://brainly.com/question/21172316
#SPJ1
Your consulting firm is asked to design an activated carbon adsorption system to treat contaminated groundwater containing
10mg/L of benzene with a treatment goal of 99% reduction in benzene concentration before injection into groundwater. The extraction well pumps groundwater at
100gpm. The activated carbon removal capacity is expressed as the following Freundlich equation:
q(mg/g)=2C0.2, where C is the concentration (mg/L) of benzene after adsorption equilibrium. (a) What is the amount of activated carbon (kg) needed per day?(428.3 kg)
(b) If the packing density of activated carbon is 1.2 g/cm, how many 55-gallon tanks it would fill? Approximate to the nearest number exceeding the amount of activated carbon required.(∼2tanks)
(a) The amount of activated carbon (kg) needed per day is 4319.327 kg per day.
(b) If the packing density of activated carbon is 1.2 g/cm, no. of 55-gallon tanks it would fill is 18 .
What is activated carbon?An element called activated carbon or activated charcoal has pores that can trap compounds, primarily organic ones, that are present in a gas or liquid. It accomplishes this with such efficiency that it is the purifying agent that people use the most frequently.
Chains of carbon and hydrogen atoms make up the fundamental structure of organic compounds, which are produced by the metabolism of living things. All of the derivatives from the plant and animal kingdoms, including oil and the compounds made from it, are included in this group.
Adsorption is the ability of a solid to hold onto the walls of a moving molecule. Adsorbent refers to the solid, and adsorbate refers to the molecule.
No other single purification method has more applications than activated carbon, which is used to retain solids that are present in a fluid after filtration.
Learn more about activated charcoal
https://brainly.com/question/29548411
#SPJ1
c agevalue and weightvalue are read from input. declare and assign pointer mydog with a new dog object. then, set mydog's age and weight to agevalue and weightvalue, respectively.
Following is the program using pointer we use the pointer concept to solve this
Program:
#include <iostream> using namespace std;
class Dog{
public: Dog();
void Print();
int age; int weight;
}; Dog::Dog()
{ age = 0; weight = 0;
} void Dog::Print()
{ cout<<"Dog's age: "<<age<<endl; cout<<"Dog's weight: "<<weight<<endl;
} int main()
{ int ageValue; int weightValue;
cin>>ageValue; cin>>weightValue; // declare Dog pointer with a new Dog Object
Dog*myDog= new Dog(); // now setting age, weight with ageValue & weightValue respectively
myDog->age = ageValue;
myDog->weight = weightValue;
myDog->Print();
return 0;
}
What is a pointer?
A pointer is a type of variable that holds as its value the memory address of another type of variable. The * operator creates a pointer variable, which points to a data type (like an int) of the same type.
Thus using a pointer concept the program gives the estimate output
To know more on pointers follow this link:
https://brainly.com/question/28574563
#SPJ4
The Age and weight values are read from the input using c is
int agevalue;
int weightvalue;
struct Dog {
int age;
int weight;
};
struct Dog* mydog = malloc(sizeof(struct Dog));
mydog -> age = agevalue;
mydog -> weight = weightvalue;
What is input?
Input is the data that is entered into a computer system or other electronic device. It can be in the form of text, images, audio, video, or any other type of digital information. The output of the system is what the user receives as a result of the input.
To learn more about input
https://brainly.com/question/28498043
#SPJ4
Although not limited by the NEC, if a 15-amp residential circuit is to be loaded only up to its rating, how many outlets can be put on the 120-volt circuit if the outlets are rated at 120 VA per outlet? Select one: a. 15 b. 1 c. 20 d. 8 e. 9
Although not limited by the NEC, if a 15-amp residential circuit is to be loaded only up to its rating, The number of outlets that can be put on the 120-volt circuit if the outlets are rated at 120 VA per outlet are 15 (Option A).
What is a residential circuit?These are similar to the wire systems in your home, but they can be as large as the power lines outside. Power circuits are required when a considerable volume of electricity has to be transmitted and managed.
The majority of your home's typical 120-volt domestic circuits are (or should be) parallel circuits. Outlets, switches, and light fixtures are connected such that the hot and neutral wires form a continuous circuit pathway separate from the various devices that consume electricity from the circuit.
Learn mroe about the residential circuit:
https://brainly.com/question/13053867
#SPJ1
A "calorie" is a unit of energy, defined as the amount of energy needed to raise the temperature of one gram of water by one degree Celsius. The nutritional labels on food products typically tell you how many calories of digestible energy are in one serving of food, where "digestible" means that the energy stored in the chemical bonds of the molecules comprising the food can be extracted by your body. (Water for example has energy, but that energy is not chemically accessible via digestion.) To simplify understanding for typical consumers, the "calories" reported on nutritional labels actually represent kilocalories: a 170 calorie can of beer actually contains 170,000 calories of digestible energy.
i) If a student foolishly decides to binge drink 21 beers on their 21t birthday, how many gallons of water could they have heated from room temperature (24 °C) to boiling (100 C) using an equivalent amount of digestible energy in the beer? Recall that one gallon of water is roughly 8 pounds.
ii) What is this energy equivalent to in BTU? A "BTU" or British Thermal Unit is also a unit of energy, defined as the amount of energy needed to raise the temperature of one pound of water by one degree Fahrenheit
iii) If you had purchased an equivalent amount of electrical energy in kW-hr from the utility company, how much would you have to pay? Is this cheaper than buying beer?
A "calorie" is a unit of energy that is defined as the usually inform you of the number of calories of digestible energy present in one serving of food. 21 beers times 17 calories per beer equals 357 calories.
What is "calorie"?Calories are units of energy that a food or drink provides. You can usually find calorie counts listed on food items, and wearables like the best fitness trackers allow you monitor how many calories you're burning by doing different activities. Certain foods, such as fatty, fried, or processed foods, tend to have more calories. Other foods, such as fresh fruit and vegetables, tend to have fewer calories. However, some healthy fruits and vegetables can be high in calories, while low-calorie foods, such as diet soda, don’t provide any nutritional value. We need calories to give us enough energy to move around, stay warm, grow, work, think, and play. Even our blood circulation and digestion need the energy gained from calories in order to function well.To learn more about blood circulation refer to:
https://brainly.com/question/20393668
#SPJ4
AP board question.... An urban planner is designing a new urban housing development in a currently rural area near an existing city. The urban development will have five 10-story apartment buildings, two basketball courts, a playground with permeable foam pavers, a 10-acre green space with a small man-made pond, one 5-story parking deck, and direct access to the mass transit train line. Which of the following aspects in the design for this new urban development would most likely have the greatest negative environmental impact?
The five residential complexes that make up the design of this new urban development will probably have the worst effects on the environment.
What are the two primary factors causing urban growth?Natural population growth and rural-to-urban migration are the two main causes of urbanization. Small villages, towns, and cities of all sizes are affected by urbanization, which eventually results in the emergence of megacities with populations more than 10 million.
What other styles of urban planning exist?In the sections that follow, we'll go through each of the seven categories of urban planning: strategic urban planning, land-use planning, infrastructure planning, urban revitalization, master planning, economic development, and environmental planning.
To know more about development visit:-
https://brainly.com/question/28011228
#SPJ4
what is meant by the trend component of a time series? how is a linear trend different from a nonlinear trend?
The element of a time series known as a trend represents low-frequency variations in a time series after high and medium-frequency fluctuations have been removed through filtering. Plotting a linear relationship on a graph results in a straight line, but plotting a nonlinear relationship results in a curve.
What is a linear relationship?
No matter if a straight-line graph crosses the origin, the formal term for it is linear, and the relationship between the two variables is referred to as a linear relationship. A curved graph's relationship is referred to as non-linear in a similar way.
If you change one variable n times, it will affect the other variable n times in the same way. This is known as a linear relationship. To put it another way, both variables will double if you double one.
To learn more about a linear relationship, use the link given
https://brainly.com/question/29495734
#SPJ4
The corner store sells candy in ₵20, ₵30 and ₵50 packages. List all the ways in which the Candyman
can spend exactly $3.00 on candy.
Answer: I will list them down below!
Explanation:
He can buy 6, 50 cent candies.
He can buy 30, 20 cent candies.
He can buy 6, 30 cent candies and 6, 20 cent candies.
He can buy 15, 20 cent candies and 3, 50 cent candies.
He can by 3, 20 and 30 cent candies and 3, 50 cent candies.
That's it.
Hope this helps!
Determine the upper limit of the alternating shear stress, for infinite fatigue life (i.e. modified fatigue shear strength)= ___ MPa
For infinite fatigue life, the alternating shear stress maximum is equal to 0.5 MPa.
What causes the most shear stress?The maximum shear stress is the amount of shear force that can be focused in a relatively compact space. Any structural part that experiences shear force from an external force acting in a direction that is opposed to and out of alignment with internal forces
What is the stress equation?The units would predict that stress is calculated by dividing the force by the area where it was generated, and since this area ("A") can be either axial or sectional, the fundamental stress equation is " = F/A."
To know more about stress visit:-
https://brainly.com/question/25632718
#SPJ4
why do bioprocess engineers tend to maintain a fixed height to diameter ratio when scaling up reactors? how does this affect transport?
In bioreactors, effective mixing is necessary to prevent concentration gradients, which can injure mammalian cells.
We used a colorimetric approach and two pH indicators to monitor mixing times in containers with nominal contents ranging from 2 to 1500L in order to examine mixing and its scalability in cylindrical bioreactors that are orbitally shaken. The liquid height, shaking diameter, agitation rate, and container inner diameter were the four operating parameters that were tested. As the agitation rate increased, the mixing time shrank until a minimum value was obtained. To achieve the shortest mixing time when the shaking diameter was decreased, a higher agitation rate was required.
Learn more about decrease here-
https://brainly.com/question/15224197
#SPJ4
An inflow hydrograph is given for a reservoir that has a weir-spillway outflow structure. The flow through the spillway is governed by the equation ) Q = 3.75Ly3/2 (cfs), where L is the length of the weir and y is the height of the water above the spillway crest. The storage in the reservoir is governed by S = 300y (ac-ft). Using A1 = 10 hr, L = 15 ft, and So = lo = 0, route the inflow hydrograph through the reservoir using the storage indication method. Time (hr) Inflow (cfs) 12 24 36 48 60 72 84 96 108 120 132 144 156 40 35 37 125 340 575 722 740 673 456 250 140 10
A hydrograph is a graph that shows the stream flow over time. The inflow hydrograph of the given question is given below.
What is a graph?In discrete mathematics, more specifically in graph theory, a graph is a structure that amounts to a set of objects in which some pairs of the objects are conceptually "related."
The objects correspond to mathematical abstractions known as vertices (also known as nodes or points), and each of the related pairs of vertices is known as an edge (also called link or line).
In diagrammatic form, a graph is typically represented as a collection of dots or circles for the vertices and lines or curves for the edges. In discrete mathematics, graphs are one of the topics of study.
Inflow and outflow hydrograph through the reservoir using the storage indication method (see the attachment).
Learn more about hydrograph
https://brainly.com/question/29658984
#SPJ4
consider point a adjacent to the wall at mid height draw the mohrs-coulomb failure envelope in g
Shear strength Mohr-Coulomb chart According to the Mohr-Coulomb theory, as given in Eq., the shear strength () is a function of the normal stress (), internal friction angle (), and cohesion (c) (1). τ = c + (σ . Tan φ) .
The Mohr-Coulomb parameters are what?The Mohr-Coulomb parameters are calculated by choosing a linear envelope that "best-fits" a non-linear envelope over a specified range of stresses. Using the Failure range option in the materials dialog, the stress range is specified.
The Mohr hypothesis of failure is what?This theory is based on the idea that failure will happen when the greatest shear stress is greater than the maximum shear stress required for yielding in a uni-axial test. Consequences: Max,abs = Y/2 is the value that defines the failure border.
To know more about coulomb visit :-
https://brainly.com/question/15167088
#SPJ4
Can someone please help me the answer is supposed to be A but I don’t know why
We can see here that the element in the circuit that is possibly a resistor is Element B.
What is a resistor?A resistor actually known to be a electrical component or device that has two terminals through which current enters and leaves. A resistor is known to limit or regulate the flow of electrical current in an electronic circuit. Resistors are known to be used in order to also provide a kind of specific voltage for a device that is active like a transistor.
Resistors are used in electrical and electronics in order to control the flow of current, reduce current, divide voltages, adjust the level of signals and terminate transmission lines. It is used for other purposes in the electronics field.
We see here that element B selected above is a resistor. The arrow on the head is pointing downward which indicates that current is entering.
Learn more about resistor on https://brainly.com/question/13606415
#SPJ1
an ice cube with a small solid steel sphere frozen inside floats in a glass of water filled to the brim. what happens to the level of water in the glass as a result of the ice melting?
As the ice cube with the steel sphere frozen inside melts, the level of water in the glass will rise.
Why does the level of water rise?the ice cube with the steel sphere frozen inside melts, the level of water in the glass will rise because the steel sphere has a greater density than the water in the glass, so when it is frozen inside the ice cube, the ice cube will be less dense than the water and will float on the surface.
However, as the ice cube melts, the steel sphere will become exposed and will sink to the bottom of the glass, increasing the overall density of the water and causing the water level to rise.
To Know More About density, Check Out
https://brainly.com/question/15164682
#SPJ1
How would you describe good communication? Why and when do we need it?
The primary of an ideal transformer with a turns ratio n of 5 is connected to a voltage source with Thevenin parameters vTh = 10 cos2000t V and RTh = 100 Ω. Determine the average power P delivered to a 520 Ω load connected across the secondary winding.The average power P = ?? mW
According to Thevenin's Theorem, we get The average power P we get 2000 cos² 2000t
What is Thevenin’s theorem?According to Thevenin's Theorem, a voltage source connected in series with a resistor can be used to represent any two terminal linear network or circuit. Thevenin's equivalent circuit is what it is called. Independent sources, dependent sources, and resistors are all possible components in a linear circuit.Thevenin's theorem is helpful for studying electrical power systems and other circuits that have a variable resistor, or "load" resistance. With each trial value of load resistance, the circuit must be recalculated in order to ascertain the voltage across and current flowing through it.given :
a turns ratio n = 5
Thevenin parameters vTh = 10 cos2000t
RTh = 100 Ω.
resistance in secondary winding = 540 Ω.
P = V ² R.
= (10 cos2000t )² .100
= 10000 cos² 2000t
secondary coil ratio 5
p= 2000 cos² 2000t
To learn more about Thevenin's Theorem refer,
https://brainly.com/question/29801802
#SPJ4
A heat pump is used to heat a house and maintain it at 24°C. On a winter day when the outdoor air temperature is –5°C, the house is estimated to lose heat at a rate of 82000 kJ/h. Determine the minimum power required to operate this heat pump. The minimum power required to operate this heat pump is kW.
The minimum power required to operate this heat pump will be 2.17 kW.
What is the efficiency of the heat pump?The efficiency of the heat pump is given as,
η = T₂ / (T₂ - T₁) = Q / W
An intensity siphon is utilized to warm a house and keep up with it at 24°C. On a colder time of year day when the outside air temperature is - 5°C, the house is assessed to lose heat at a pace of 82000 kJ/h.
Then the minimum power is given as,
82,000 / W = (24 + 273) / [(24 + 273) - (- 5 + 273)]
W = 7811.4478 kJ/h
W = 2.17 kW
The minimum power required to operate this heat pump will be 2.17 kW.
More about the efficiency of the heat pump link is given below.
https://brainly.com/question/13016330
#SPJ1
Ramon, a software engineer at Frensen Inc., needs to develop high-quality graphic illustrations for presentation at his next team meeting. In the context of application software, he must use ____ software to accomplish thi:sA desktop publishing B spreadsheet C database D word processing
In the context of application software, he must use desktop publishing software to accomplish this. Therefore, the correct answer option is: A. desktop publishing.
What is an application software?In Computer technology, an application software can be defined as a type of software program which is designed and developed to enable end users perform a variety of tasks on a computer system such as desktop publishing (DTP).
What is Microsoft Publisher?Microsoft Publisher can be defined as a desktop publishing application software or program that is designed and developed by Microsoft Inc., in order to avail its end users an ability or opportunity to work on page layout and graphic design such as a flier or graphic illustrations for presentation.
Read more on Microsoft Publisher here: brainly.com/question/26717262
#SPJ1
Lamaellar eutectic solids form because the geometry limits diffusion distances required for solidification of alpha and beta phases. True False
Fals, Diffusion takes place across small distances due to the urgency of the phase shift, creating a fine lamellar microstructure.
The eutectic structure forms for what reason?A lamellar eutectic structure can only form if the interfacial energy between the two solids (S1/S2; S1 and S2 stand for Solid 1 and Solid 2, respectively) is lower than that of S1/Liquid and S2/Liquid. The diffusional partitioning of components results in the formation of eutectic microstructure.
What features distinguish a eutectic structure?A homogenous, solid mixture of two or more materials that forms a super-lattice is referred to as a eutectic system. The mixture either melts or solidifies at a lower temperature than the melting point of any of the constituent materials. The phrase is most frequently used to describe an alloy composition.
To know more about eutectic visit:-
https://brainly.com/question/27886492
#SPJ4
Please show all steps please
The resultant force will be F = 6i-j-14k , Therefore f1 and f2 are in cartesian form.
What is the resultant force?Rectangular components or Cartesian components are vector components that run along orthogonal axes. A vector decomposed into its rectangular components can be expressed using either the scalar notation or the Cartesian vector notation.The coordinates of the Free-body diagram points are given as
0=(0,0,0) m
A=(0.15,0,0.3) m
B=(0,-0.25,0.3) m
Therefore the position vector of OA will be.
roa = (0.15-0)i +(0-0)j +(0.3–0)k
= 0.15i +0j +0.3k
Then the position vector of OB,
rob =(0-0)i +(-0.25 - 0); +(0.3–0)k
= 0i -0.25j +0.3K
So,
The equivalent resultant force can be expressed as,
F = F1+ F2
By substituting,
6i - 3j -10k for F1, and 2j -4K for F2.
F =6i -3j -10k +2j - 4k
= 6i - 1j -14k
Hence the resultant force is F = 6i-j-14k , which is cartesian form.
To learn more about cartesian form refer to :
https://brainly.com/question/14886503
#SPJ1