The broad bands or regions located around the nucleus where the electrons are found are called energy rings.
True
False

Answers

Answer 1

It is false that the broad bands or regions located around the nucleus where the electrons are found are called energy rings.

The nucleus is the centre of an atom. Protons and neutrons are particles that make up the nucleus. Shells of electrons rotate around the nucleus. The atom is made up of a small nucleus surrounded by electrons that move. The nucleus includes protons, with a positive charge equivalent to the negative charge of an electron. Neutrons, which have almost the same mass but still no charge as protons, may also be found in the nucleus.

The nuclear powerful force extends long enough from each baryon to bind protons and neutrons together while repelling the repelling electrical force between positively charged protons. The nuclear force acting has a relatively narrow range and practically vanishes just beyond the nucleus's border.

To know more about the Electrons,  here

https://brainly.com/question/3503522

#SPJ4


Related Questions

Draw the product (s) formed by heating the following compounds in basic ethanol.
EtOH
NaOEt

Answers

the product (s) formed by heating the following compounds in basic ethanol: EtOH and NaOEt is shown in the image.The reaction product is simpler because it is determined by the condition of the reagent and the catalyst or solvent.

there are many factors that determine the product as given. When alcoholic beverages (beer, wine, and spirits) are diluted, ethanol is present. It is used topically to prevent skin infections, in pharmaceutical preparations (such as rubbing compounds, lotions, tonics, and colognes), cosmetics, and perfumes. Ethanol, also referred to as ethyl alcohol, is a colourless, flammable liquid with a strong odour. It is the alcohol found in alcoholic beverages and employed as a solvent that is generated by fermentation. Alcohols are organic molecules made up of carbon, oxygen, and hydrogen atoms. When two carbons are present, the alcohol is referred to as ethanol (also known as ethyl alcohol).

Learn more about ethanol here:

https://brainly.com/question/25002448

#SPJ4

Place the following in order of increasing magnitude of lattice energy:
K2O Rb2S Li2O
least lattice energy < --- --- ---> most lattice energy
I am really struggling with how to calculate lattice energy. So if you could, please explain how you got the answer and how that method could be generalized to other similar questions. I realize it has something to do with the charge product between the elements in the molecule, and secondary to that is the atomic radius... it's just not clicking for me to do on the fly.

Answers

Li2O > K2O > Rb2S is the order of given compounds lattice energy in the increasing order

Lattice energy is a measure of the strength of the electrostatic attraction between the positively charged cations and negatively charged anions in an ionic compound. The greater the lattice energy, the stronger the electrostatic attraction and the more stable the compound.The most common method for determining lattice energy is the Born-Haber cycle. This method uses thermochemical data of the individual steps in the formation of an ionic compound to calculate the lattice energy. However, it is often impractical to use this method in a test environment, so a more practical method that is used to compare lattice energies of different compounds is the use of the Coulomb's law which relates the lattice energy to the charge product of the cations and anions and the distance between them.

Learn more about  lattice energy here:

https://brainly.com/question/29441166

#SPJ4

Potassium Permanganate is used for purifying drinking water, because

A. it is a sterilising agent
B. it dissolves the impurities of water
C. it is a reducing agent
D. it is an oxidising agent

Answers

Answer:

D. it is an oxidizing agent

Explanation:

How many liters of. 225 M Na2S solution would be required to react completely with 81. 8 g Fe(C2H3O2)3? (The molar mass of iron (III) acetate is 233. 00 g/mol. )

Answers

0.002 liters of 225 M Na2S solution is required to completely react with 81.8 g Fe(C2H3O2)3

Starting from the balanced equation of the reaction and the molar mass of iron (III) acetate (Fe(C2H3O2)3, first the reacting moles of this compound are determined, then the amount of reacting moles of sodium sulfide (Na2S) is determined and finally the amount of solution that contains said amount of moles.

Balanced equation of the reaction

3Na2S + 2Fe(C2H3O2)3 → 6NaC2H3O2 + Fe2S3

Determination of liters of 225 M Na2S solution for a complete reaction

This determination is made in three steps:

Determination of reactant moles of Fe(C2H3O2)3Determination of the reactant moles of Na2SDetermination of the volume of solution with the number of reacting moles of Na2S

Determination of reactant moles of Fe(C2H3O2)3

If 233.00 g of Fe(C2H3O2)3 is equivalent to 1 mol of Fe(C2H3O2)3

So 81. 8 g Fe(C2H3O2)3 equals x mol of Fe(C2H3O2)3

X mol of Fe(C2H3O2)3 = 81. 8 g Fe(C2H3O2)3 x 1 mol of Fe(C2H3O2)3 / 233.00 g of Fe(C2H3O2)3

X mol of Fe(C2H3O2)3 = 0.351 mol

Determination of the reactant moles of Na2S

If 2 moles of Fe(C2H3O2)3 react with 3 moles of Na2S

Then 0.351 mol of Fe(C2H3O2)3 reacts with x mol of Na2S

X mol of Na2S = 0.351 mol Fe(C2H3O2)3 x 3 mol of Na2S / 2 mol of Fe(C2H3O2)3 = 0.526 mol

Determination of the volume of solution with the number of reacting moles of Na2S

If there are 225 moles of Na2S in 1 liter of solution

So there are 0.526 moles of Na2S in x liter of solution.

X liter of solution = 0.526 mol of Na2S x 1 liter of solution / 225 mol of Na2S = 0.0023 liters, that is, 2.3 ml

Therefore, 0.0023 liters of 225M Na2S solution is required.

Learn more about required liters of Na2S solution at https://brainly.com/question/24185902

#SPJ4

Which of the following elements can be isolated by electrolysis of the aqueous salt shown? O Phosphorus from K3PO4 (aq) O Sodium from NaBr (aq) O Aluminum from AlCl3 (aq) O ch Fluorine from KF(aq) O lodine from Nal (aq)

Answers

The following elements can be isolated by electrolysis of the aqueous salt :  Phosphorus from K3PO4 (aq).

What is electrolysis?

Electrolysis is the method used to divide water into hydrogen and oxygen. An electrolyzer is a device where this process takes place.

In chemistry and production, the electrolysis method can be used to speed up a typically non-spontaneous chemical reaction. Electrolysis is significant from a business perspective as a phase in the electrolytic cell-based separation of elements from naturally existent sources like ores.

By introducing an electric current into a substance, electrolysis alters its chemical makeup. Depending on the substance, one electron is either lost or acquired during the chemical reaction (oxidation or reduction).

To know more about electrolysis, refer

https://brainly.com/question/12994141

#SPJ4

How many liters of 30% acid must be added to 2 liters of 15% acid to result in a mixture that is 25% acid.

Answers

4 liters of 30% acid must be added to 2 liters of 15% acid to result in a mixture that is 25% acid.

To find the amount of 30% acid that must be added to 2 liters of 15% acid to result in a mixture that is 25% acid, we can use the concept of percentage concentration. The percentage concentration is defined as the ratio of the number of moles of solute (in this case acid) to the total number of moles of the solution.

Let's call x the number of liters of 30% acid to be added. Then the final volume of the solution is (2+x) liters.We know that the final concentration of the solution is 25%, so we can write the following equation:

(moles of acid in 2 liters of 15%) + (moles of acid in x liters of 30%) / (2+x) = 0.25

We can now use the percentage concentration to find the number of moles of acid in each volume of acid:

moles of acid in 2 liters of 15% = (2L * 0.15) = 0.3 moles

moles of acid in x liters of 30% = (xL * 0.30) = 0.30x molesWe can now substitute these values in the equation above:

(0.3) + (0.30x) / (2+x) = 0.25

Solving for x we can find the volume of 30% acid that needs to be added to the 2 liters of 15% acid:

0.3 + 0.30x = 0.25(2+x)

0.3 + 0.30x = 0.5 + 0.25x

0.05x = 0.2

x = 4 L. Therefore, 4 liters of 30% acid must be added to 2 liters of 15% acid to result in a mixture that is 25% acid.

learn more about acid here:

https://brainly.com/question/29796621

#SPJ4

In a lifetime, the average American uses more than a half ton (500 kg) of copper in coins, plumbing, and wiring. Copper is obtained from sulfide ores, such as chalcocite [copper(I) sulfide] by a multistep process. After initial grinding, the ore is "roasted" (heated strongly with oxygen gas) to form powdered copper(I) oxide and gaseous sulfur dioxide. How many moles of oxygen are required to roast 10. 0 mol of copper(I) sulfide?

Answers

The required moles of oxygen is 10.0 mol of [tex]O_2[/tex] (Oxygen) is required to roast 10.0 mol of CuS (copper(I) sulfide).

Because the Sulphur absorbs the impurities as fumes and reacts with the remaining ore to produce Copper metal by auto-reduction, the ore is partially roasted.

[tex]Cu_2S.Fe_2S_3+O_2→Cu_2S+2FeS+SO_2[/tex]

[tex]Cu_2S+3O_2→Cu_2O+2SO_2[/tex]

Sulfide ore is heated by a heat source in the presence of air during the roasting process. The ore or ore concentrate is treated with very well-liked air during roasting. This method is frequently used when processing sulfide ores. The sulfide that is present during roasting is changed into oxide and emitted as sulfur dioxide, a gas.

Roasting's primary purposes are to eliminate volatile impurities and oxidize the ore by turning it into oxide.

A significant copper resource is COPPER-PYRITES, often known as chalcopyrite, which is a copper iron sulfide (CuFeS2).

To roast 10.0 mol of copper(I) sulfide (CuS), the balanced equation is CuS + O2 → CuO + SO2.

For every mole of CuS that reacts, one mole of O2 is consumed. Therefore, 10.0 mol of [tex]O_2[/tex] is required to roast 10.0 mol of CuS.

To know more about the copper roasting visit :

https://brainly.com/question/15077424

#SPJ4

0.25 mol of potassium nitrate is added to enough water to make a 175 mL solution.
What is the molar concentration of potassium nitrate?

Answers

A solute is a species that dissolves within a liquid solvent to form a solution—a single, uniform mixture. The total volume of the solution can be expressed in liters.

The total amount of solute contained within can be expressed as a number of moles. The solute concentration in molarity is calculated by combining these two values. The molarity is expressed in "mol/L" according to the required calculation, though it is frequently written in "M" units.

What does molarity stand for?

The amount of a substance in a certain volume of solution is known as its molarity (M). Molarity is the ratio of a solute's moles to liters of solution. The molar concentration of a solution is another name for molarity.

To learn more about Molarity here:

https://brainly.com/question/8732513

#SPJ1

The_____gene shows up even when inherited only from one parent.

Answers

Answer:

The Alleles gene shows up even when inherited only from one parent

Explanation:

The two alleles in a gene pair are inherited, one from each parent. Alleles interact with each other in different ways. These are called inheritance patterns.

i hope this helped

2.278 x 10^-4 mol of an unidentified gaseous substance effuses through a tiny hole in 95.70 s. Under identical conditions, 1.738 x 10 ^-4 mol of argon gas takes 81.60 s to effuse. What is the molar mass of the unidentified substance

Answers

The unnamed material has a molar mass of 32 grammes per mole, and it exhales 2.278 x 10-4 molecules of an unknown gas through a minute hole in 95.70 seconds.

It takes 81.60 s for 1.738 x 10 -4 mol of argon gas to effuse under the same circumstances. The definition of molar mass is the mass in grammes of a mole of a specific chemical. The term "mole" refers to any material or compound that includes the Na number of atoms, molecules, or ions, where Na is the Avogadros number and Na = 6.023 1023. A molecule's total atomic mass expressed in grammes per mole is known as its molar mass. to figure out a molecule's molar mass

R1/R2 equals (M2/M1)1/2 2.38*10-6/2.1299*10-6 = sqrt(40/M1).

40 M1/M1 = 1.25 M2/M2 = 32 gm/mole

Learn more about molar mass here

https://brainly.com/question/12127540

#SPJ4

For each of the following balanced chemical equations, write all possible mole ratios: a. 2Ca + O2 ⎯→ 2CaO b. Mg + 2HF ⎯→ MgF2 + H2

Answers

The mole ratio of the reactants and products is

a. 2 : 1 : 2

b. 1: 2:1:1

The ratio of the mole quantities of any two compounds present in a balanced chemical reaction is known as the mole ratio. A comparison of the ratios of the molecules required to accomplish the reaction is given by the balancing chemical equation. The coefficients of each species in the reactants and products are used to calculate the mole ratio of the reactants and products. The mole ratio of the reactants and products, as demonstrated by the equation in the question, is 2: 1: 2 and 1:2:1:1 respectively.

Learn more about Mole Ratio

brainly.com/question/14676971

#SPJ4

How many bonds could each of the following chelating ligands form with a metal ion?
a. acetylacetone(acacH)
b. dirthylenetriamine
c. Salen
d. porphine

Answers

a. Acetylacetone(acacH) can form up to 4 bonds with a metal ion.

b. Dirthylenetriamine can form up to 4 bonds with a metal ion.

c. Salen can form up to 6 bonds with a metal ion.

d. Porphine can form up to 8 bonds with a metal ion.

The theoretical yield of NaBr from 2.36 mol FeBr3 is 7.08 mol NaBr. What is the percent yield if 6.14 mol NaBr were collected?

Answers

The percent yield for the reaction in this example is 100%, which is equal to the theoretical yield of NaBr from 2.36 mol FeBr3 of 7.08 mol NaBr.

What is NaBr's theoretical yield?

The lesser amount, or 13.7 g NaBr, represents the potential yield. 15.45 grams of NaBr can never be produced because after 13.7 grams of NaBr are created, the reaction runs out of NaI and stops generating NaBr product. As the limiting reactant, NaI is well-known.

How is % yield determined?

The final answer is expressed in percent by dividing the experimental yield by the theoretical yield and multiplying the result by 100. In general, the percent yield value is less than 100%,

To know more about theoretical yield visit:-

https://brainly.com/question/14966377

#SPJ1

Answer: 87%.

Explanation:

An ideal gas (which is is a hypothetical gas that conforms to the laws governing gas behavior) confined to a container with a massless piston at the top. (Figure 2) A massless wire is attached to the piston. When an external pressure of 2.00 atm is applied to the wire, the gas compresses from 6.40 to 3.20 L . When the external pressure is increased to 2.50 atm , the gas further compresses from 3.20 to 2.56 L .

In a separate experiment with the same initial conditions, a pressure of 2.50 atm was applied to the ideal gas, decreasing its volume from 6.40 to 2.56 L in one step.

If the final temperature was the same for both processes, what is the difference between q for the two-step process and q for the one-step process in joules?

Answers

Answer: -162,120J

Explanation:

Okay, so q stands for work, given by the formula q = -P∆V,

For the first round, we have 2atm (for P) and a volume change of 3.2 (6.4-3.2) for the first experiment.

Find the work: q = -2 • (3.2 - 6.4) = 6.4L/atm

For the second experiment, it is now 2.5atm, with the change in volume going from 3.2 to 2.56.

So, work is q = -2.5(2.5 - 3.20) = 1.6L/atm

Add the total work: 1.6 + 6.4 = 8L/atm

To find the Joules per L/atm, recall that a mol of gas in K is 8.31447J, while the gas constant where a liter of gas per mol in K is 0.08206L/atmK. Divide these two values, which leaves us with 101,325J

So, for the first round, multiply 8 x 101,325, which leaves us with 810,600J.

Second round: The pressure is 2.5atm, with the volume change from 6.40 to 2.56

Solve for work: q = -2.5(2.56-6.4) = 9.6L/atm

Multiply with the Joule unit found earlier: 9.6 x 101,325 = 972,720J.

To find the difference, subtract the value of the single-step process (second round) from the first round (multistep)

810600 - 972720 = -162,120J. Therefore, it takes more heat to do the single step than the multistep process.

What should we do to reduce the risk when working with concentrated acids and bases? a) Never work with it b) Work with large volumes c) Neutralize it d) Dilute them

Answers

To reduce the risk when working with concentrated acids and bases, it is important to never work with them directly, work with large volumes, neutralize them, and dilute them.

a) Never work with it - Concentrated acids and bases can be extremely dangerous and should never be handled directly.

b) Work with large volumes - In order to reduce the risk, it is important to always work with large volumes of the acid or base so that the concentration is lower.

c) Neutralize it - It is important to neutralize both acids and bases before disposing of them in order to reduce the risk of harm to people or the environment.

d) Dilute them - Diluting acids and bases by adding water can reduce their concentration, making them safer to work with.

To reduce the risk when working with concentrated acids and bases, it is important to never work with them directly, work with large volumes, neutralize them, and dilute them.

learn more about acid here

https://brainly.com/question/14072179

#SPJ4

The table shows the nature of the reactants and products formed in a certain type of chemical reaction.


Nature of Reactants and Products
Reactants Products
Ionic compound + Ionic compound Ionic compound + Ionic compound


Which of the following is true about this type of chemical reaction?
It is a single replacement reaction, and all four compounds are different.
It is a double replacement reaction, and all four compounds are different.
It is a single replacement reaction, and each compound has the same set of ions.
It is a double replacement reaction, and each compound has the same set of ions.

Answers

The reaction that has been shown in the table above is a double replacement reaction, and each compound has the same set of ions. Option D

What is a reaction?

Another word that we can use for reaction is what we call a chemical change. We know that a chemical change is the kind of change that will lead to the formation of a new product. It is an irreversible process as we can not be able to get back the reactants again.

We should note that there are various types of reactions. In a single  replacement reaction, you would notice that there is only one substance that reacts and causes a change while in the double replacement reaction, the anions that are in the compounds that underwent the reaction would just exchange anion partners and we would have two ionic products.

Learn more about reactions:https://brainly.com/question/28984750

#SPJ1

how does the pitcher plant use chemical reactions

Answers

Answer: Pitcher plant have adapted themselves to live in poor nutriet soil As they are carnivorous and feed on the insects is the major adptation for them as they does not have proper nutrients,availabilty for the growth.

Explanation:

Oil of vitriol is a substance that humankind has known of for thousands of years! Today the substance is known by it's scientific name sulfuric acid and has the molecular formula H2SO4. What is the molar mass of H2SO4

Answers

The molar mass of H2SO4 is 98.08 g/mol. It is a combination of hydrogen with molecular weight of 1g, sulfur with 32g and oxygen with 16g and the total combination is 2x1+1x32+4x16 = 98g.

Humanity has been aware of oil of vitriol for thousands of years. The chemical name for this material is sulfuric acid, and its molecular formula is H2SO4. It is made up of sulfur, oxygen, and hydrogen molecules. Strong and hygroscopic sulfuric acid (H2SO4) has oxidizing and hygroscopic characteristics. Because it was made by roasting "green vitriol" (iron(II) sulfate) in an iron retort, sulfuric acid was known as "oil of vitriol" by medieval European alchemists. Due to its oily appearance and occurrence in vitreous or glassy substances like ferrous sulphate and alum, it is also known as the "oil of vitriol."

To learn more about sulfuric acid click here https://brainly.com/question/29303579

#SPJ4

How many geometric isomers are possible for the complex [CrF3Br3]3– ?

Answers

To solve this we must be knowing each and every concept related to isomer. Therefore, two  geometric isomers are possible for the complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻.

What is isomer?

An isomer is a chemical substance that has the same number and kinds of atoms like another chemical species that differs from it in terms of attributes due to the way the atoms are organized.

Stereoisomerism includes geometric isomerism. It is sometimes referred to as E-Z isomerism or cis-trans isomerism. Geometric isomerism is caused by cyclic compounds' constrained rotation around carbon-carbon double or single bonds.  The complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻ has two  geometric isomers, one is facial and other is meridional.

Therefore, two  geometric isomers are possible for the complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻.

To learn more about isomer, here:

https://brainly.com/question/28188244

#SPJ1

What is the variable in an experiment?
A the glass tubes you use
B the questions you ask
C the thing you want to test
D the part that stays the same

Answers

im not sure but i think the answer is C

What is the exact molar mass of aspartame?

Answers

Aspartame, C14H18N2O5, has a molar mass of 294.307 grams/mol. As a result, the molecular weight of aspartame (C14H18N2O5) is equal to the molecular weights of 14 carbon atoms, 18 hydrogen atoms, 2, nitrogen atoms, and 5, oxygen atoms. As a result, aspartame (C14H18N2O5) has a molecular weight of 294.307 g/mol.

You can quickly determine the molar mass of aspartame if you have a periodic table nearby (C14H18N2O5), because combining the molar masses of the constituent atoms yields the molar mass of any molecule (or compound). Aspartic acid is known by the IUPAC name 2-Aminobutanoic acid, and its chemical formula is HOOCCH (NH 2) CH 2 COOH.

Learn more about aspartame here:

https://brainly.com/question/9352908

#SPJ4

aseous ammonia chemically reacts with oxygen gas to produce nitrogen monoxide gas and water vapor. Calculate the moles of ammonia needed to produce 1.3 mole of water

Answers

The moles of ammonia needed to produce 1.3 mole of water is 0.84 mol.

balance chemical equation for the reaction

[tex]4NH_{3}+5O_{2}- > 4NO +6H_{2}O[/tex]

In chemistry, stoichiometry is the measurement of the ratios in which different substances or elements interact. The laws of conservation of mass, energy, and weights or volumes serve as the foundation for the rules used to determine stoichiometric relationships.

stoichiometric moles of ammonia reacting = [tex]\frac{moles}{stoichiometry}[/tex]

stoichiometric moles of water reacting = [tex]\frac{1.3}{6} =0.21[/tex]

0.21 stoichiometric moles of water is given by 0.21 stoichiometric moles of water

so moles of ammonia will form = stoichiometric moles * stoichiometry

moles of ammonia will form = 0.21 * 4  = 0.84 mol

so moles of ammonia produced by reaction = 0.84 mol

Learn more about moles

brainly.com/question/26416088

#SPJ4

Which element doe not form a table ion with the ame electronic configuration a neon?
A Magneium B Fluorine C Sodium D Chlorine

Answers

Sodium does not form a stable ion with the same electronic configuration as neon.

Electronic configuration of an element describes that how the electrons are distributed in its atomic orbitals. Electronic configuration of an atoms follows a standard notation in which all electron-containing atomic subshells (with the number of electrons they hold written in superscript) are placed in a sequence.

Sodium (Na) ion has the same electronic configuration as that of neon. Both are the isoelectronic species with 10 electrons and the electronic configuration is 1s22s22p6.

Sodium has electronic configuration is 1s22s22p63s1. It loses one electron  to give Na+ ion with the electronic configuration of neon (Ne).

To know more about element here

https://brainly.com/question/13794764

#SPJ4

reasons why large quantities of electricity is used for down's cell​

Answers

1.High energy demands: Down's cells require a large amount of energy to function effectively. The process of creating and maintaining the cells requires significant energy inputs to power equipment, lighting, heating, and cooling systems.

2.Manufacturing processes: Many of the processes involved in creating and maintaining Down's cells are energy-intensive. This includes cell replication, gene manipulation, and tissue culture.

3.Complex equipment: The equipment required for Down's cell research and production is often complex and requires significant energy inputs to operate. This includes centrifuges, microscopes, and other specialized equipment used in the lab.

4.Climate control: Down's cells must be kept at specific temperatures and humidity levels to maintain their integrity. This requires the use of energy-intensive climate control systems to maintain optimal conditions.

5.Data storage and processing: With the growing amount of data generated by Down's cell research, large quantities of electricity are also needed to store and process the data.

6.Extensive research and development: Down's cells are a relatively new area of research, which means that large amounts of electricity are used to power experimentation and the testing of new techniques and methods.

To learn more about electricity:-

https://brainly.com/question/776932

4. How many molecules are in 32.6 grams of potassium oxide?
a. Go from grams to moles
b. Then moles to molecules

Answers

2.084*10^23 molecules are in 32.6 grams of potassium oxide.

What Is Molar mass ?

A chemical's molar mass is its weight in grammes for one mole. A mole is a unit used to measure how many atoms, molecules, and ions are present in a substance. The number of molecules in a mole of any substance is 6.022 x 1023.

Although the terms "molecular mass" and "formula mass," which refer to molar mass specifically for molecular compounds, are frequently used interchangeably, their definitions vary according to the most reputable sources.

Molar mass of K2O is 94.196g

Given mass = 32.6g

1 mole of K2O = 94.196g

So, 32.6g will be 32.6/94.196g

i.e. 0.346moles

1 mole of K2O = 6.023*10^23molecules of

0.346moles will be 2.084*10^23 molecules

To learn more about molar mass use link below:

brainly.com/question/837939

#SPJ1

at the left.
2. Which of the following is not a
chemical change? E
A leaves turning color
B fruit ripening
C silver tarnishing
D food coloring dissolving in water

Answers

The correct answer is D.

Answer:

D

Explanation:

there is no new substance formed

consider three identical flasks with different gases. in which flask will the molecules have the greatest average velocity

Answers

The flask A, flask B, flask C, all have equal average kinetic energy at 0°C.

What is the average kinetic energy?

The average kinetic energy of the particles in a gas is inversely related to its temperature. These particles must move more quickly as the gas warms because their mass is constant.

KE avg = 3/2RT

As a result, it is possible to state that average kinetic energy depends on temperature. As a result, as the temperature rises, the gas molecules become more energetic and move at a faster rate.

The average kinetic energy also stays the same because, in accordance with the question, the temperature is constant across all flasks.

Therefore, the average kinetic energy of flasks A, B, and C at 0°C is the same.

To know more about kinetic energy visit:

https://brainly.com/question/28207341

#SPJ4

Complete question is " Consider three identical flasks with different gases:

Flask A: CO at 760 torr and 273 K

Flask B: N₂ at 250 torr and 273 K

Flask C: H₂ at 100 torr and 273 K

In which flask will the molecules have the greatest average kinetic energy per mole?

What are the 3 types of elements?

Answers

The three types of elements are metals, non-metals as well as metalloids, there are placed in a periodic table.

In a periodic table, metals are placed in s-block and d-block. While non-metals as well as metalloids are placed in p-block. Metals are generally lustrous, malleable as well ductile in nature and are usually hard in nature while non-metals lack these properties. Metalloids are the elements whose chemical as well as physical properties lies between both metals and non-metals. Examples of metals are sodium and potassium. Examples of non-metals are carbon and phosphorus while examples of metalloids are silicon and germanium.

To learn more about elements check the link below:

https://brainly.com/question/25916838

#SPJ4

H2O2 → H2O+ ½ O2
Hydrogen peroxide decomposes to produce water and oxygen according to the equation above. An experimentally determined graph for the first-order decomposition of hydrogen peroxide is provided below.
Which of the following best identifies the rate constant k for the reaction based on the information in the plot of ln[H2O2] versus time (t)?
O k = ln[H2O2] at t = 0s
O k = ln[H2O2] at t = 500s
O k = −(slope of plot)
O k = −1/(slope of plot)

Answers

k = -1/(slope of plot) is the correct answer to identify the rate constant k for the reaction based on the information in the plot of ln[H2O2] versus time (t).

The equation for the first-order decomposition of hydrogen peroxide is H2O2 → H2O+ ½ O2The graph provided is a plot of ln[H2O2] versus time (t)The rate constant (k) is a measure of how fast a reaction occursIn the context of first-order reactions, the rate constant is related to the slope of a plot of ln[H2O2] versus time (t)

Therefore, the rate constant can be determined by finding the slope of the plot and then using the formula k = -1/(slope of plot)

Learn more about rate constant here:

https://brainly.com/question/24749252

#SPJ4

Baed on the preure information in the data table, how are the preure of light and heavy particle related to the preure of the mixed particle?

Answers

Based on the pressure information in the data table, the pressure of light and heavy particle related to the pressure of the mixed particle having same pressure and same volume.

Why do heavy and light particles experience the same pressure?

The lighter H₂ molecules will hit the walls more frequently and with less force because they move faster and collide with them more frequently. Because both light and heavy molecules hit the walls with roughly the same average kinetic energy at the same T, their pressure and consequent volume will be equal.

As the temperature increases, the particles gain energy and accelerate their motion. The movement of heavier particles is slower than that of lighter ones at the same temperature. Both the environment and the particles' mass affect their actual average speed.

To know more about pressure visit:

https://brainly.com/question/14760196

#SPJ4

Complete question is" Based on the pressure information in the data table, how are the pressure of light and heavy particle related to the pressure of the mixed particle?".

Other Questions
Write a Java program for user defined exception that checks the internal and external marks; if the internal marks is greater than 30 it raises the exception Internal mark exceeded; if the external marks is greater than 70 it raises the exception and displays the message External mark exceeded, Create the above exception and test the exceptions. Select the correct answers.Find the two words that should not start with capital letters.Im going to the Gym with James Tomorrow, Friday and Sunday. Why is the workplace changing? If investment spending increases and all other levels of spending remain constant, then aggregate:a. supply increasesb. supply decreasesc. demand increasesd. demand decreases what are the effects of colonization Thiamine hydrochloride (vitamin B1 hydrochloride, HC12- H17ON4SCl2) is a weak acid with Ka 5 3. 4 3 1027. Sup- pose 3. 0 3 1025 g of thiamine hydrochloride is dissolved in 1. 00 L of water. Calculate the pH of the resulting solution. (Hint: This is a sufficiently dilute solution that the autoion- ization of water cannot be neglected. ) Which environment would most likely produce sedimentary deposits characterized by very well-sorted, very well-rounded grains that are nearly pure quartz All budgetary changes have consequences.Describe the impact of the three largest cuts you made. How would these cuts impact the economy and the presidents reelection chances?Explain your answer in at least four complete sentences. name a solid that when burnt colourless gases are formed.One gas is strongly acidic while the other is slightly basic please help solve this its for geometry What happens in Chapter 4 of Dr Jekyll and Mr Hyde? NEED HELP ASAP DUE TMR What are the 4 characteristics of a healthy person? What was the most significant impact of World War 2? What do you think is the difference between a play and a drama 2 What is the term used to describe the author of a play 3 What is a tragic play? Ethnocentrism is assuming that one's culture is superior to other cultures.A. TrueB. False Every New Year's Day, Jennifer brings 13 candies for each of her grandchildren and 20 more candies for the adults to share.Let g represent the number of Jennifer's grandchildren and c represent the total number of candies she brings.Find the value of c when g=9. A manufacturer tests 1200 computers and finds that 9 of them have defects. Find the probability that a computer chosen at random has a defect. Round your answer to the nearest hundredth. 40 POINTS!! RESPOND QUICKLY!! Tell whether ratios form a propotion 1/4; 3/1254/10; 81/1518/24; 15/20someone help me pls:(