Answer
stuck on dis too
Explanation:
The cost to rent a new sports car from a rental company is $550 per month. Which input/output (I/O) model correctly shows the domain and range of this situation where c, the total cost to rent the car is a function of m, the number of months that it is rented?
Draw a correctly labeled production possibilities curve for an economy producing capital goods and consumer goods, assuming constant opportunity costs.
The graph known as the production possibilities curve (PPC) illustrates all the possible output combinations that can be created using the available resources and technology. The PPC, also referred to as the production possibilities frontier (PPF), depicts scarcity and tradeoffs.
What is the production possibilities curve?The PPF is a curve that is based on data of two variables that represent resources between two goods, so the data can be changed to observe how factors like scarcity, growth, inefficiency and other factors can affect production.
Changes in the total number of production factors that are currently available or technological advancements may be the cause of an outward or inward shift in the PPF.
Learn more about PPC on:
https://brainly.com/question/29392873
#SPJ1
The following table gives the velocity of a vehicle at different moments in time. What is the average acceleration for the vehicle from t=3 to t=10?
The following table gives the velocity of a vehicle at different moments in time. The average acceleration for the vehicle t = 3 to t = 10 is 5 m/s².
What is average acceleration?The rate of change in velocity, or the change in velocity per unit of time, is known as average acceleration. The square of the distance over time is used to measure acceleration.
Average is read as a symbol with a bar over it, so a bar represents average acceleration.
Avg. acceleration = change in velocity V(t)-Vh) /change in time (t2 - t1)
Avg. acceleration = V (10) - v (3) / t2- t1
Avg. acceleration: 40-5 / 10-6
Avg acceleration 35 / 7
Avg. acceleration 5 m/s²
Therefore, the average acceleration for the vehicle is 5 m/s².
To learn more about average acceleration, refer to the link:
https://brainly.com/question/17352997
#SPJ1
Take the data of the output of your organisation summarise them with some tool (like bar chart, pie chart, etc.) and discuss the result. Give your opinion to improve the results in the future.
Answer:
Learning Outcomes. Create a frequency table, bar graph, pareto chart, pictogram, or a pie chart to represent a data set; Identify features of ineffective
Explanation:
Learning Outcomes. Create a frequency table, bar graph, pareto chart, pictogram, or a pie chart to represent a data set; Identify features of ineffective
The tools involved in learning outcomes may significantly include a frequency table, bar graph, Pareto chart, pictogram, or pie chart in order to represent a data set and recognize features.
What is an example of any data that uses these tools?An example of data that uses these tools may include the number of boys and girls in the school with respect to their categories, i.e. unreserved, other backward classes, scheduled castes, scheduled tribes, etc.
According to the context of this question, tools like bar graphs, pie charts, pictograms, etc. are constructed on the basis of the collection of data and information with respect to the given categories. The result in the future can be improved with the help of utilizing several other technologies along with computer programs.
Therefore, the tools involved in learning outcomes may significantly include a frequency table, bar graph, Pareto chart, pictogram, or pie chart in order to represent a data set and recognize features.
To learn more about Learning outcomes, refer to the link:
https://brainly.com/question/20461060
#SPJ2
The country with the most restrictive plastic bag ban is ?
Answer:
Vanuatu because I searched it up and it says its the leading way in the reduction of plastic consumption are the people of Vanuatu
Ap Human Geography Unit 4 FRQ question 1
Political geographers analyze political systems at all levels—from local and regional politics to national politics and international politics—using the geographical perspective. Political geographers investigate topics including voting trends, representation, and territorial organization at small sizes.
What is political?A political viewpoint is a belief or point of view that has some influence on matters dealt with by the government. Political affiliation includes belonging to or identifying with a specific political party, supporting a specific candidate, or identifying in some way with a political cause.
A political party brings together people who share similar political beliefs. Parties that participate in elections strive to get as many of their members as possible elected to a representative body, such as parliament or a city council.
Despite differences in school regulations, most institutions provide students who score a 3 or better on the AP Human Geography exam placement and/or credit. Given how challenging this subject is, getting a high mark on it impresses college admissions officers in particular.
Therefore, Political geographers investigate topics including voting trends, representation,
Learn more about political here:
https://brainly.com/question/10369837
#SPJ1
“I have a customer who is very taciturn m”
“I have a customer who is very taciturn: "He won't speak with you?" (Option B)
What does it mean to be Taciturn?Taciturn means being habitually untalkative or reluctant to speak. A person who is taciturn is typically quiet and reserved, and may not speak much or engage in conversation readily. Taciturnity can be a personality trait or a temporary state of being and can be due to various factors such as shyness, introversion, or a reluctance to reveal personal thoughts or feelings.
Being taciturn does not necessarily imply a lack of intelligence or social skills, and people who are taciturn can still be friendly and engaging when they do speak.
To handle customers who are taciturn, it may be helpful to approach them in a friendly and non-threatening manner and give them space to speak at their own pace.
Learn more about customers:
https://brainly.com/question/13472502
#SPJ1
Full Question:
Coworker: "l have a customer who is very taciturn."
Does he have trouble knowing when to stop talking?He won't speak with you?It is great that he is so willing to purchase our products!I wonder why he won't return to the store.It is too bad that he won't purchase any of our products.At 25°C a plant cell containing 0.4 M glucose is placed in a beaker containing a 0.5 M glucose solution exposed to the
open air. The plant cell is in equilibrium with this solution. What is the plant cell's pressure potential? Box your
answer.
The pressure potential of a plant cell is a measure of the osmotic pressure inside the cell. It is determined by the concentration of solutes inside the cell compared to the concentration of solutes in the surrounding solution.
In this case, the plant cell contains 0.4 M glucose and is placed in a 0.5 M glucose solution. This means that there is a higher concentration of glucose outside the cell than inside the cell. As a result, water will tend to move from the surrounding solution into the cell, increasing the pressure inside the cell.
How do you calculate pressure potential of the plant?To calculate the pressure potential of the plant cell, you can use the following formula:
Pressure potential = (-i) x R x T x ln(Ci/Co)
where:
- i is the van't Hoff factor, which is the number of particles produced by the dissociation of the solute in solution. For glucose, the van't Hoff factor is 1.
- R is the universal gas constant, which is 8.314 J/mol*K.
- T is the temperature in Kelvin. At 25°C, the temperature is 298 K.
- Ci is the concentration of solute inside the cell (0.4 M in this case).
- Co is the concentration of solute in the surrounding solution (0.5 M in this case).
Plugging in the values, we get:
Pressure potential = (-1) x 8.314 J/mol*K x 298 K x ln(0.4 M/0.5 M)
= -5.6 J/mol
The pressure potential of the plant cell is -5.6 J/mol. This negative value indicates that the pressure inside the cell is lower than the pressure outside the cell, which is due to the higher concentration of solute outside the cell. This osmotic pressure difference drives water to move into the cell, increasing the pressure inside the cell.
Therefore, the correct answer is as given above
learn more about pressure potential: https://brainly.com/question/10970371
#SPJ1
Briefly explain how the concepts below could be used to help a child stop throwing temper tantrums.
- Extinction (operant conditioning)
- Positive reinforcement
- Modeling
- Negative reinforcement
- Shaping
- Extinction (classical conditioning)
Blackjack is a popular card game where cards are assigned various point values. "Face-cards" and tens are the only cards worth 10 points. Each round begins with a player being dealt two cards.
The table below is a partially completed probability distribution for the random variable Y, where Y is the number of 10-point cards a player gets at the beginning of a round.
Find the missing probability in the table.
Blackjack is a popular card game where cards are assigned various point values. The missing probability in the table is 0.475. The correct option is c.
What is probability?Simply put, the probability is the likelihood that something will occur. When we don't know how an event will turn out, we can discuss the likelihood or likelihood of several outcomes. Statistics is the study of events that follow a probability distribution.
The end goal is to get all three distributions to equal 1.
0.435 + 0.09 = 0.525
Subtract that from 1, and you will get 0.475
Therefore, the correct option is c, 0.475.
To learn more about probability, refer to the link:
https://brainly.com/question/30034780
#SPJ1
The question is incomplete. Your most probably complete question is given below:
0.525
0.565
0.475
0.91
Answer:
0.435
Explanation:
khan
Uplift and weathering are two of the processes that shape the features of the Earth. How are they different and how are they similar?
Answer:
an uplift-weathering hypothesis is a “proposal that chemical weathering is an active driver of climate change, rather than just a negative feedback that moderates climate". uplift-weathering hypothesis both discuss how chemical weathering is a negative feedback that moderates climate; however, the uplift hypothesis tries to say that chemical weathering is the active driver for climate change and not just a negative feedback
Explanation:
Answer:
an uplift-weathering hypothesis is a “proposal that chemical weathering is an active driver of climate change, rather than just a negative feedback that moderates climate". uplift-weathering hypothesis both discuss how chemical weathering is a negative feedback that moderates climate; however, the uplift hypothesis tries to say that chemical weathering is the active driver for climate change and not just a negative feedback
Explanation:
1+1= __
Please aide me in the completion of this problem.
Answer:
1+1=2
Explanation:
This a addition in math
Hope it helps you
Answer:
This is a really tough question, but I'll try my best!
First, let's understand the 1
1 (one, also called unit, and unity) is a number and a numerical digit used to represent that number in numerals. It represents a single entity, the unit of counting or measurement. For example, a line segment of unit length is a line segment of length 1. In conventions of sign where zero is considered neither positive nor negative, 1 is the first and smallest positive integer.[1] It is also sometimes considered the first of the infinite sequence of natural numbers, followed by 2, although by other definitions 1 is the second natural number, following 0. The fundamental mathematical property of 1 is to be a multiplicative identity,[2] meaning that any number multiplied by 1 returns that number. Most if not all properties of 1 can be deduced from this. In advanced mathematics, a multiplicative identity is often denoted 1, even if it is not a number. 1 is by convention not considered a prime number; although universal today, this was a matter of some controversy until the mid-20th century.
Now let's understand the mathematics & properties of 1
Mathematics:
Mathematically, 1 is:
in arithmetic (algebra) and calculus, the natural number that follows 0 and the multiplicative identity element of the integers, real numbers and complex numbers;
more generally, in algebra, the multiplicative identity (also called unity), usually of a group or a ring.
Formalizations of the natural numbers have their own representations of 1. In the Peano axioms, 1 is the successor of 0. In Principia Mathematica, it is defined as the set of all singletons (sets with one element), and in the Von Neumann cardinal assignment of natural numbers, it is defined as the set {0}.
In a multiplicative group or monoid, the identity element is sometimes denoted 1, but e[2] (from the German Einheit, "unity") is also traditional. However, 1 is especially common for the multiplicative identity of a ring, i.e., when an addition and 0 are also present. When such a ring has characteristic n not equal to 0, the element called 1 has the property that n1 = 1n = 0 (where this 0 is the additive identity of the ring). Important examples are finite fields.
By definition, 1 is the magnitude, absolute value, or norm of a unit complex number, unit vector, and a unit matrix (more usually called an identity matrix). Note that the term unit matrix is sometimes used to mean something quite different.
By definition, 1 is the probability of an event that is absolutely or almost certain to occur.
In category theory, 1 is sometimes used to denote the terminal object of a category.
In number theory, 1 is the value of Legendre's constant, which was introduced in 1808 by Adrien-Marie Legendre in expressing the asymptotic behavior of the prime-counting function. Legendre's constant was originally conjectured to be approximately 1.08366, but was proven to equal exactly 1 in 1899.
Properties:
Tallying is often referred to as "base 1", since only one mark – the tally itself – is needed. This is more formally referred to as a unary numeral system. Unlike base 2 or base 10, this is not a positional notation.
Since the base 1 exponential function (1x) always equals 1, its inverse does not exist (which would be called the logarithm base 1 if it did exist).
There are two ways to write the real number 1 as a recurring decimal: as 1.000..., and as 0.999.... 1 is the first figurate number of every kind, such as triangular number, pentagonal number and centered hexagonal number, to name just a few.
In many mathematical and engineering problems, numeric values are typically normalized to fall within the unit interval from 0 to 1, where 1 usually represents the maximum possible value in the range of parameters. Likewise, vectors are often normalized into unit vectors (i.e., vectors of magnitude one), because these often have more desirable properties. Functions, too, are often normalized by the condition that they have integral one, maximum value one, or square integral one, depending on the application.
Because of the multiplicative identity, if f(x) is a multiplicative function, then f(1) must be equal to 1.
It is also the first and second number in the Fibonacci sequence (0 being the zeroth) and is the first number in many other mathematical sequences.
The definition of a field requires that 1 must not be equal to 0. Thus, there are no fields of characteristic 1. Nevertheless, abstract algebra can consider the field with one element, which is not a singleton and is not a set at all.
1 is the most common leading digit in many sets of data, a consequence of Benford's law.
1 is the only known Tamagawa number for a simply connected algebraic group over a number field.
Thus, I can conclude that 1 + 1 is indeed equal to 2
10. In dimension drawings, the dimensions writ-
ten on the drawing are
a. for reference only
b. on a larger scale
c. inaccurate
d. the actual dimensions
Answer:
d. the actual dimensions.
Explanation:
In Engineering, it is a standard and common practice to use drawings and models in the design and development of buildings, tools or systems that are being used for proffering solutions to specific problems in different fields such as banks, medicine, telecommunications and industries.
Hence, an architect or design engineer make use of drawings such as pictorial drawings, sketches, or architectural (technical) drawing to communicate ideas about a plan (design) to others, record and retain informations (ideas) so that they're not forgotten and analyze how different components of a plan (design) work together.
Architectural drawing is mainly implemented with computer-aided design (CAD) software and it's typically used in plans and blueprints that illustrates how to construct a building or an object.
Additionally, architectural drawings such as a section view in a general plan, show in detail how the areas of a building relate to each other, as well as accurately illustrating the actual (true) shape and size of a building in the design and development process.
In dimension drawings, the dimensions written on the drawing are the actual dimensions and the drawings are then made using a scale to reduce the drawing in same proportion.
Explain the failures of compromise and the mounting sectional rifts that led to the Civil War.
(a) In 2–3 sentences, explain how the war represented an extension of earlier and ongoing conflicts.
(b) In 2–3 sentences, explain how the war resolved—or failed to resolve—the issues at the root of the war.
Use the excerpt from Clay’s Resolutions of 1850 to answer the question.
It being desirable, for the peace, concord, and harmony of the Union of these States, to settle and adjust amicably all existing questions of controversy between them aris- ing out of the institution of slavery upon a fair, equitable and just basis: therefore,
1. Resolved, That California, with suitable boundaries, ought, upon her application to be admitted as one of the States of this Union, without the imposition by Congress of any restriction in respect to the exclusion or in- troduction of slavery within those bound- aries.
2. Resolved, That as slavery does not exist by law, and is not likely to be introduced into any of the territory acquired by the United States from the republic of Mexico, it is in- expedient for Congress to provide by law either for its introduction into, or exclusion from, any part of the said territory; and that appropriate territorial governments ought to be established by Congress in all of the said territory , not assigned as the boundaries of the proposed State of California, without the adoption of any restriction or condition on the subject of slavery.
…
5. Resolved, That it is inexpedient to abolish slavery in the District of Columbia whilst that institution continues to exist in the State of Maryland, without the consent of that State, without the consent of the people of the District, and without just compensation to the owners of slaves within the District.
6. But, resolved, That it is expedient to prohibit, within the District, the slave trade in slaves brought into it from States or places beyond the limits of the District, either to be sold therein as merchandise, or to be trans- ported to other markets without the District of Columbia.
7. Resolved, That more effectual provision ought to be made by law, according to the requirement of the constitution, for the restitution and delivery of persons bound to serv- ice or labor in any State, who may escape into any other State or Territory in the Union. And,
8. Resolved, That Congress has no power to promote or obstruct the trade in slaves be- tween the slaveholding States; but that the admission or exclusion of slaves brought from one into another of them, depends exclusively upon their own particular laws.
Answer:
(a) The Civil War represented an extension of earlier and ongoing conflicts over the issue of slavery, as well as other sectional differences between the North and South. The Clay's Resolutions of 1850 attempted to address some of these conflicts and find a compromise, but ultimately failed to resolve the underlying issues that led to the war.
(b) The Civil War ultimately failed to resolve the issues at the root of the conflict, including slavery and states' rights. The war ended with the defeat of the Confederacy and the abolition of slavery, but many of the underlying issues and tensions between the North and South persisted for many years after the war. The Reconstruction period following the war attempted to address some of these issues, but was ultimately unsuccessful in fully reconciling the differences between the regions.
The Civil War was a continuation of earlier and ongoing battles between the North and South over the subject of slavery as well as other sectional issues.
What was Civil War?The Clay's Resolutions of 1850 made an effort to address some of these disputes and reach an agreement, but they ultimately failed to address the fundamental problems that caused the war.
In the end, the Civil War failed to overcome the problems that led to the fight, such as slavery and states' rights.
Even though the Confederacy was defeated and slavery was abolished after the war, many of the underlying problems and tensions between the North and South continued for many years after the conflict.
Therefore, The Civil War was a continuation of earlier and ongoing battles between the North and South over the subject of slavery as well as other sectional issues.
To learn more about civil war, refer to the link:
https://brainly.com/question/11874600
#SPJ1
Family influence has a large impact on individuals suffering from somatoform disorders, especially if there is a ___
with the same diagnosis.
A. Female Relative
B. Male relative
C. Parent
D.Sibling
Answer:
C. Parent
Explanation:
Answer:
A. Female Relative
Explanation:
Answer on edge
Why is audience awareness important when writing instructions?
1. It helps the writer determine slang that is popular with readers.
2. It allows the writer to consider the exact needs for readers.
3. It lets the writer identify illustrations that engage readers.
4. It allows the writer to analyze the buying behavior of readers.
Answer:
4 I would say is the answer
Can someone revise my English essay on the scarlet letter. Respond if interested, and your actually a good writer.
Answer:
I don't mind reviewing it and helping you with your grammar!
Explanation:
Question 1 (5 points)
(01.03 LC)
Who came to the Mississippi River Valley to convert Native Americans to Catholicism, but did not try to change their customs? (5 point
a
Ob
O c
Od
Spanish missionary
Dutch conquistador
British indentured servant
French missionary
Answer:
French Missionary
Explanation:
An airline claims that the mean flight time between City X and
City Y is 38 minutes. After taking many flights,
a local business group believes that the claim is unrealistic and
that the actual mean flight time is greater than
38 minutes. If the group conducts a study to investigate its
belief, which of the following hypotheses should be
tested?
If the group conducts a study to investigate its belief, the hypotheses that should be tested is this:
H₀ : μ = 38ΗΑ : μ > 38What is a testable hypothesis?A testable hypothesis is a form of speculation that can be evaluated so that it can be proven as true or false. Given the question above, we can see that there is speculation that the real average flight time between the two cities is greater than 38 minutes. Thus, we now have a null and alternate hypothesis.
While the null hypothesis would assume the equals sign and is the main claim to be tested, the alternate hypothesis is the true claim when the null is not true. This is accurately represented by the values:
Learn more about the null and alternate hypothesis here:
https://brainly.com/question/13045159
#SPJ1
HELP NOW, PLEASE. WILL MARK BRAINLIEST
ONLY ON B-E, PLEASEEE
Include correctly labeled diagrams, if useful or required, in explaining your answers. A correctly labeled diagram must have all axes and curves clearly labeled and must show directional changes. If the question prompts you to “Calculate,” you must show how you arrived at your final answer.
Soybeans are produced and sold in a perfectly competitive market. The fertilizers used in soybean production generate a negative externality by seeping liquid contaminants into local rivers.
(a) Draw a correctly labeled graph of the soybean market, and show each of the following.
(i) The marginal private cost, labeled MPC
(ii) The marginal social cost, labeled MSC
(iii) The marginal social benefit, labeled MSB
(iv) The market equilibrium quantity, labeled QC
(v) The socially optimal quantity, labeled QS
(vi) The area of the deadweight loss, shaded completely
(b) Assume the government sets a binding price floor such that the quantity demanded in the market is between QS and QC.
(i) What will happen to the quantity produced?
(ii) Will the price floor reduce the deadweight loss? Explain.
(c) Assume instead of a price floor, the government decides to impose a lump-sum tax. What will happen to the socially optimal quantity? Explain.
(d) Assume instead of a lump-sum tax, the government decides to impose a per-unit tax equal to the marginal external cost.
(i) On your graph in part (a), indicate the new market equilibrium quantity, labeled QN.
(ii) What will happen to the deadweight loss? Explain.
(e) If this market were a monopoly with identical cost conditions, would the monopoly’s profit-maximizing quantity be greater than, less than, or equal to QC?
comment on the follow following line this way, and that, she peers and sees silver fruit upon silver trees
Take the data of the output of your organisation summarise them with some tool (like bar chart, pie chart, etc.) and discuss the result. Give your opinion to improve the results in the future.
Answer: A bar chart depicts numeric values against distinct categories in a two-axis plot. On one axis, the category levels are listed. For each category, one bar is plotted, and its length along the other axis corresponds with the numeric value associated with the category. The example bar plots below show how an app’s user base is divided among different device types. Note that a bar chart can be oriented in two ways, with the bars oriented vertically or horizontally.
A pie chart shows how some total amount is divided among distinct categories as a circle (the namesake pie) divided into radial slices. Each category is associated with a single slice whose size corresponds with the category’s proportion of the total. The figure below plots the same data as above, but using the pie chart form instead. While the example above demonstrates how the same data can be plotted in multiple ways, do not make the mistake of thinking that they are always interchangeable. With a bar chart, there is freedom on the numeric value axis to choose whatever values you’d like. For numeric values that indicate metric totals or data point counts, the sums across groups will tend to be equal to the sum across the data as a whole. In cases like this, a pie chart is just as valid as a bar chart as a visualization choice.
However, if the numeric values indicate some other statistic where the sum across groups does not equal the statistic ignoring groups, that’s when we run into problems. Examples include taking the average of a metric (e.g. average spend by user type) or if we look at proportions that are independent (e.g. proportion of survey respondents who use each of the polled apps). A bar chart is fine for this case, but a pie chart falls short. Since the circular shape implies that slices are parts of a whole, it is too easy for a reader to mistake a sum of slices as a representative of some sort of total. Interested in exact contribution from each group: Ignoring the presence of additional annotations, it can be difficult to tell what proportion of the whole each slice occupies. While it might be easy to make a judgement when a slice takes up a multiple of 1/3 or 1/4, it’s much harder to pin down a smaller value or one in between. This is fine if we want to be able to take away judgments like “more than half” or “about a third”, but for finer-tuned messages, the visualization doesn’t stand on its own.
Multiple slices have similar values: Since pie charts usually don’t have markings around their circumference, it can be hard to compare the groups of similar size. While it’s a good convention to sort the slices, this is not a guaranteed step in pie chart creation. Without annotations, at best we can say that the two groups are similarly-sized but not which one is larger.
Too many slices: If there are too many slices, then it’ll probably run into the problem of either there being similarly-sized slices (see the above) or slices that are too small. Those small slices can be difficult to read and color distinctly. If the proportions are needed, then axis values can be in terms of proportion rather than the natural units. It is also easier to detect small differences from bar heights, even if they are placed out of order. When there are lots of categories, it’s relatively easy to find additional space for more bars, especially if they are plotted horizontally.
When a pie chart should be used
That isn’t to say that a pie chart has no place in visualization: it can be effective when conveying findings to others. The one major benefit to the pie chart is that it immediately sells the idea of a part-to-whole comparison. With a bar chart, it may not be immediately clear how much each bar contributes to the whole, or that it’s the kind of comparison that is of interest, unless the bar units are in terms of proportions or percentages. In that latter case, additional annotations are needed anyways to note both an absolute value as well as the relative value.
On the other hand, a pie chart is familiar and suits our aesthetic sensibilities. Especially if we care only about one or two slices, a pie chart can help highlight the story around those parts. When slices are around the small fractions (1/3, 1/4), those takeaways can be easily conveyed by a pie. Combining uninteresting or small slices into an ‘other’ group can clean up the information that a pie chart needs to display. A bar chart might be better in the general case, but if you need to present findings to others, a pie chart might end up being more effective and appealing.
am i correct??
plz help
Answer:
yes I think brain should be removed because our sense organs are
eyesnoseearskintongueBased on the first paragraph identify one argument made in the classic narrative of the columbian encounter
Based on the first paragraph, one argument made in the classic narrative of the Columbian encounter as well as other questions is given below
What are the argument?a) One assertion made by the classic account of the Columbian encounter was that European control over Amerindian people in America resulted in wars between Europeans. The arguments of the new generations of historians have, however, been supported by the development of the microscope to see and study diseases.
b) Because the "younger breed of historians" would examine this in relation to European Imperialism and see the impact of European diseases like Smallpox that would afflict places like the Modern United States due to the European Immunity, but Lack of Native Protection, the development of diseases in the sixteenth century would support the assertions of the "new generation of scholars" in the second paragraph.
Lastly, in question c) While the few diseases that did exist in America did not significantly affect Europeans, they were transferred to America from Europe and were exceedingly lethal to the natives, providing Europeans an advantage in the biological race.
Learn more about argument from
https://brainly.com/question/22399388
#SPJ1
See full question below
Use the passage below to answer all parts of the question that follows.
“The classic narrative [of the Columbian encounter] can be summarized as follows: At the end of the fifteenth century Christopher Columbus discovered America, adding to the world two continents populated sparsely with ‘savages.’. . . . Then the conquistadores, few in number but courageous, conquered the Amerindian civilizations, which, for all their temples and gold, were evidently no more than paper tigers. . . . British, French, Dutch, and other European soldiers, merchants, and settlers did much the same thing in those parts of the New World not yet claimed by the Iberians. The history of the New World subsequently became the struggle of European imperialist powers for domination, and Amerindians ceased to be important. . . .
[A new generation of historians, however, took] a fresh look at the origins of European imperialism, [examining] perhaps elements less dramatic than gold and God and heroes. . . . [According to these historians], in 1492 two systems, one of the Old World and the other of the New World, collided. The Old World peoples had some distinct advantages in the biological competition that followed. . . . The decisive advantage of the [European] invaders of America was not their plants or animals—and certainly not their muskets and rifles, which Amerindians eventually obtained in quantity—but their diseases. . . . These were the most lethal of the invaders of the New World in the sixteenth century.”
a) Based on the first paragraph, identify ONE argument made in the “classic narrative” of the Columbian encounter.
b) Explain ONE development in the sixteenth century that would support the arguments of the “new generation of historians” in the second paragraph.
c) Describe ONE way in which the “biological competition” referred to in the second paragraph contributed to European imperialism in the Americas.
(I know its a lot but im using all my points I have just for this one question, thank you)
PLEASE HELP FAST!!!!!! I AM BEING TIMED!!!!!
8. In the last sentence of the third paragraph (lines 19–22), the speaker shifts focus from
A. the present actions of the colonists to the former actions of the British
B.how the British ministry has operated to how the British throne has functioned
C. how the colonists have engaged with the British to how the British have reacted to the colonists
D. the positive features of negotiations with the British to the negative aspects of diplomacy
E. the chaotic colonial politics to the oppressive British politics
Answer:
b
Explanation:
Answer:
C. how the colonists have engaged with the British to how the British have reacted to the colonists
Explanation:
IT's most definitely C!!!
What happens to light waves after they enter the eye?
put correct answers plzz
Helppp
Answer:
The answer is C.
what's the answer to life?
Answer:
Life is for the living not the dead. Life is what you make it to be.
Explanation:
LIVE
Contextualization: When were Jim Crow Laws passed? How long did Jim Crow laws last?
Note that Jim Crow laws were passed in the late 1800s, after the Reconstruction era following the American Civil War.
These laws were state and local laws that enforced racial segregation and discrimination against black Americans, and they were in place for about 100 years, until the mid-1960s.
The Jim Crow era ended with the Civil Rights Movement and the passage of the Civil Rights Act of 1964 and the Voting Rights Act of 1965, which made discrimination on the basis of race, color, religion, sex, or national origin illegal.
Who was Jim Crow?Thomas Dartmouth ("Daddy") Rice, an itinerant white performer, is supposed to have created the role of Jim Crow around 1830. Rice was not the first performer to assume rags and blacken his face with burnt cork in order to give a sarcastic exaggerated copy of an African American, but he was the most renowned, and his popularity helped create minstrelsy as a popular theatrical tradition that thrived from around 1850 to 1870.
By the late 1830s, "Jim Crow" had become a derogatory word for African Americans, but it was perhaps not as widespread or as hostilely scornful as some other terms.
Learn more about Jim Crow:
https://brainly.com/question/21634190
#SPJ1
Answer:
Explanation:
it lasted form 1895 to 1964
Choose the artwork from this chapter that you have the most trouble relating to visually or conceptually. Write a statement “justifying” this artwork to the best of your ability. Pretend you are taking a family member to a museum and he or she asks you to explain what this work is about. Rather than simply saying, “I don’t get it, either,” come up with what you would say to help this person understand.
Answer:
Without more context or information about the artwork in question, it is difficult for me to provide a justification for a specific piece of art. Art can be challenging to understand or relate to, and that is a normal and valid response. It is important to remember that art is a form of self-expression and can be interpreted in many different ways, and there is often no one "correct" interpretation.
If you are having trouble understanding a specific artwork, it might be helpful to try to learn more about the artist's background, the historical and cultural context in which the artwork was created, and the techniques and materials used to create the piece. You could also try looking at the artwork from different angles or distances, or try to imagine what the artist might have been thinking or feeling while creating the piece.
It is also important to remember that it is okay to not fully understand or relate to every piece of art that you encounter. Art can be a very personal and subjective experience, and it is perfectly normal to have different reactions to different works.
Explanation:
Which of the following is most likely to occur if a single price monopolist is replaced by a perfectly competitive market? A.)price will increase b .) the deadweight loss will decrease c.) profits will increase d.) output will decrease e.) the firms cost curves will shift upward
If a single price monopolist is replaced by a perfectly competitive market, the deadweight loss will decrease.
What is a deadweight loss?The term deadweight loss describes the expense incurred by society when there is an imbalance between supply and demand. It is a market inefficiency brought on by the inefficient distribution of resources. A product's deadweight loss can only ever be zero, not negative.When the supply is perfectly inelastic or when the demand is perfectly elastic, there is no deadweight loss. The gap between the production and consumption of any given good or service, including taxes, is referred to as deadweight loss in economics. When the quantity produced compared to the quantity consumed differs from the optimal concentration of excess, deadweight loss is most frequently present. So, option B is correct.To learn more about market, refer:
https://brainly.com/question/22202239
#SPJ1
Can someone create a code in JAVASCRIPT Only that creates a changing leaves project that completes this prompt
Every time a web page does more than simply sit there and display static information for you to look at displaying timely content updates.
What is JavaScript?JavaScript is probably involved. JavaScript is a scripting or programming language that enables you to implement complex features on web pages. It is the third tier of the layer cake made up of common web technologies,
The markup language we use to structure and define the meaning of our web content is called HTML.
JavaScript is a scripting language that lets you do just about everything, including creating dynamically updated content and managing multimedia. It is remarkable what you can accomplish with a few lines of JavaScript code.
Therefore, Every time a web page does more than simply sit there and display static information for you to look at displaying timely content updates.
To learn more about Javascript, refer to the link:
https://brainly.com/question/30034250
#SPJ1
CULINARY! On Cooking: Textbook of Culinary Fundamentals 6e
Discuss two recent culinary movements and their impact on the way food is served in restaurants today.
Answer:
1. Farm-to-Table: The farm-to-table movement has become increasingly popular in recent years and has had a major impact on the way food is served in restaurants. This movement focuses on using locally-sourced, fresh and seasonal ingredients in the preparation of dishes. By serving food that is sourced and grown close to the restaurant, more attention can be given to the quality and flavor of the ingredients. This movement has also pushed restaurants to be more mindful of the environmental impact of their ingredients and has encouraged them to partner with local farms and producers.
2. Molecular Gastronomy: Molecular gastronomy is a relatively new culinary movement that has gained popularity in the past few years. This movement focuses on experimenting with ingredients and cooking techniques in order to create new and interesting textures, flavors, and presentations. This movement has allowed chefs to take a scientific approach to cooking, finding ways to transform and manipulate ingredients in order to create dishes that are visually appealing and unique. By using modern cooking techniques such as sous vide, spherification, and foams, chefs have been able to create dishes that are both visually stunning and delicious.