the following data were obtained for the variation of vmax with ph for a reaction catalyzed by a-amylase at 24 oc. what can you conclude about the pka values of the ionizing groups at the active site?

Starch is a covalent compound because no ions is present in it.

A covalent bond is made from the mutual sharing of one or more pairs of electrons between two atoms. These electrons in a covalent bond are simultaneously attracted by the two atomic nuclei. A covalent bond is formed when the difference between the electronegativities of two atoms is too small for an electron transfer to occur and to form ions.

Starch is composed of long chains of glucose molecules that are bonded together through covalent bonds called glycosidic bonds. As starch contains covalent bonds it it, so it is a covalent compound.

Learn more about covalent compound from the link given below.

https://brainly.com/question/10748806

#SPJ4

Answer: ur mom

Explanation:

u don’t know she could be hot

To solve this, we must know each and every concept related to friedel-crafts alkylation reaction. Therefore, the correct option is option E among all the given options.

The Friedel-Crafts synthesis is just an aromatic chemical method in which an electrophilic substitution substitution takes place. The hydrogen in benzene is replaced by an electrophile in the vicinity of a Lewis acid, like anhydrous aluminium chloride.

Friedel-Crafts Alkylation is a chemical process in which the proton of an aromatic molecule is replaced with an alkyl. This reaction happens when there is  anhydrous aluminum chloride. Anhydrous aluminium chloride can be replaced with other Lewis acids, like FeCl[tex]_3[/tex].

Therefore, the correct option is option E.

To know more about Friedel craft reaction, here:

https://brainly.com/question/28488661

#SPJ4

Answer: What is soil? In short, soil is a mixture of minerals, dead and living organisms (organic materials), air, and water.

Explanation:

Soil is a mixture of solids, liquids, and gases. Therefore, option B is correct.

Broken-down organic matter termed humus, living creatures, and broken-down rocks and minerals make up soil. Humus is nutrient-rich, squishy, and black.

Soil is a heterogeneous combination because it is made up of tiny fragments of various components. Water is an object. Water is a compound because it contains both hydrogen and oxygen. The substance oxygen is an element.

In addition to a porous phase that contains water and gases, soil consists of a solid phase made up of minerals and organic matter. The three states of soil are thus solids, liquids, and gases.

Thus, option B is correct.

To learn more about soil, follow the link;

https://brainly.com/question/23813511

#SPJ2

The correct classification of the following compounds are as follows:

Organic compound are any compound containing carbon atoms covalently bound to other atoms most commonly hydrogen, oxygen, or nitrogen.

Inorganic compounds are those not containing carbon atoms or containing carbon atoms ionically bound to other atoms.

However, not all carbon-containing compounds are organic. For example, carbon dioxide is an inorganic compound; although it has a carbon atom it has no C-C or C-H bonds.

Therefore, the classification of organic and inorganic compounds is as illustrated above.

Learn more about organic compound at: https://brainly.com/question/5994723

#SPJ1

The molarity of sugar if its 20g are dissolved in water to make volume up to 2L is calculated as 342 g/mol.

A unit of concentration expressed as the number of moles of dissolved solute per liter of solution is called molarity. If number of moles and the volume are divided by 1000, then molarity is expressed as number of millimoles per milliliter of solution.

Molarity is the moles of a solute per liters of a solution and Molarity is also called the molar concentration of a solution.

As we know, Molarity=  Mass / (Molar mass × Volume)

Hence, the concentration of sugar;

= 20/342×2

=0.029mol/L.

Now, molar mass of sugar =342 g/mol.

To know more about sugar molarity, refer

https://brainly.com/question/2973074

#SPJ4

Its structure is linear for propane. The final carbon atom is joined to the functional group OH. Isomers are variations of compounds that share the same chemical formula but have various atomic configurations. The image of propan 1 ol and propan 2 ol is attached below.

A primary alcohol having the chemical formula CH3CH2CH2OH, propan-1-ol is also known as prOH or n-PrOH. It is an isomer of 2-propanol and a colourless liquid.

Acrolein, commonly referred to as propenal or acrylic aldehyde, is a member of the enals class of chemical compounds. These have the typical chemical formula RC=C-CH=O and are alpha, beta unsaturated aldehydes, where the aldehydic C=O function is conjugated to the C=C double bond at the alpha beta position.

Thus, Its structure is linear for propane. The final carbon atom is joined to the functional group OH. Isomers are variations of compounds that share the same chemical formula but have various atomic configurations.

To learn more about propanol, follow the link;

https://brainly.com/question/17920216

#SPJ4

Pure elements has Gibbs free energy equal to 0.

The Gibbs free energy is a concept in chemistry specially of thermodynamics. The maximum amount of work that can be accomplished at a constant temperature and pressure by a closed system can be calculated using the Gibbs free energy (also known as Gibbs energy; symbol: denoted as delta G). Additionally, it offers a prerequisite for any processes like chemical reactions that might take place in such circumstances.

When a system achieves equilibrium without being pushed by an input electrolytic voltage, the Gibbs energy is the thermodynamic potential that is reduced. At the equilibrium point, its derivative w.r.t. the system's reaction coordinate vanishes.

To know more about free energy, click here,

brainly.com/question/13765848

#SPJ4

Pyruvate undergoes fermentation, which transforms it into lactic acid inside the absence of oxygen.

The breakdown of the drug occurs throughout this process. similar to how pyruvate is converted into lactic acid.

An organic acid contains lactic acid. Its chemical formula is CH 3CH(OH)COOH.

It serves as a synthesis precursor inside a number of biochemical as well as molecular synthesis industries.

The final result of the glycolysis pathway, pyruvate, is transformed into lactic acid inside the lack of oxygen.

Glycolysis

The process through which glucose gets broken down to provide energy is known as glycolysis.

Learn more about Fermentation here :-

https://brainly.com/question/13050729r

#SPJ4

The compounds in below image categorized as meso or non-meso species.

A meso compound or meso isomer is one of a group of stereoisomers, at least two of which are optically active, but not the others. This indicates that the molecule is not chiral even though it has two or more stereocenters. The mirror image of a meso compound can be "superposed" on it.

A molecule with many identical stereocenters and an identical or superimposable mirror image is referred to as a meso complex. Enantiomers: Non-superimposable mirror copies of one another, enantiomers are optical isomers.

Thus, The compounds in below image categorized as meso or non-meso species.

To learn more about meso compound, follow the link;

https://brainly.com/question/24084193

#SPJ4

An isotope is generated when two neutrons are abruptly added to an atom with 40 protons & 51 neutrons. Zirconium-93.

Zirconium-93 decays into niobium-93m (the "m" stands for metastable), which then undergoes an isomeric shift with a half-life of 14 years and emits a beta particle with such a half-life of 1.5 million years.

It is used to create furnace linings, casting bricks, abrasives, and crucibles that can survive heat shock, as well as by the glass & ceramics industries.

To know more about Zirconium-93 visit:

https://brainly.com/question/1865293

#SPJ4

The oxygen atom in the water molecule has two lone pairs, one of which could be used to form a bond with a proton and, therefore, the water molecule could act as a base in a reaction. Since water has the potential to act both as an acid and as a base, water is amphoteric.

For more answers, Contact:
https://brainly.com/app/profile/63103549/answers

In the final step of the enzyme substrate complex, the product leaves the active site of the enzyme .

The whole process of enzyme substrate complex is a temporary molecule formed when an enzyme comes into perfect contact with its substrate. Without its substrate an enzyme is a slightly different shape. The substrate causes a conformational change when the substrate enters the active site. The active site is the area of the enzyme capable of forming weak bonds with the substrate. some enzyme functions independently. This shape change can force two or more substrate molecules together or split individual molecules into smaller parts. Most reactions that cells use to stay alive require the actions of enzymes to happen fast enough to be useful. It is influenced by temperature and pH.

To learn more about Enzyme substrate complex please visit:

https://brainly.com/question/15027095

#SPJ4

Answer:

400 meters

Explanation:

Distance is the amount traveled. It doesn't matter if the runners start and end in the same place for distance, they still travel 400 meters.

The freezing point of an aqueous solution containing 17g of c2h5oh in 1000g of water −0.69 degree celcius

What is freezing point?

When the temperature of a liquid falls below its freezing point, it transforms into a solid. According to the internationally accepted definition, freezing is the solidification phase change of a liquid or the liquid content of a substance caused by cooling.

Most substances have the same melting and freezing points; however, certain substances have different solid-liquid transition temperatures. Agar, for example, exhibits hysteresis in its melting and freezing points. It melts at 85 °C (185 °F) and solidifies at 32 °C to 40 °C (89.6 °F to 104 °F).

Hence, the freezing point of an aqueous solution containing 17g of c2h5oh in 1000g of water −0.69 degree celsius

△T f = K f × m B ×w A. w B ×1000

​ =1.86× 46×100017×1000

​ =0.69

∴ Freezing point of solution =0−0.69=−0.69 degree celsius

To know more about freezing point from given link

https://brainly.com/question/24314907

#SPJ4

The mass of precipitate that should form if 7.79 g of silver nitrate in solution is reacted with excess sodium sulfide solution is 7.98 g.

A precipitate is an insoluble substance formed at the end of a chemical reaction that involves the reaction between two soluble substances.

The precipitate comes out of the solution and settles at the bottom of the reaction vessel such as a test tube.

The equation of the precipitation is given below:

2 AgNO₃ (s) + Na₂S (aq) ---> Ag₂S (s) + 2 NaNO₃ (aq)

The molar mass of AgNO₃ is 170 g

The molar mass of Ag₂S is 246 g/mol

2 * 170 g of AgNO₃ produces 246 g of Ag₂S

7.79 g of AgNO₃ will produces7.79 * 246/240 = 7.98 g of Ag₂S precipitate.

Learn more about precipitates at: https://brainly.com/question/13652772

#SPJ1

To arrange the four compounds according to lambda max, you will need to know the lambda max values for each compound. Lambda max is the wavelength at which a compound absorbs the most light, and is a measure of the compound's color.

Here is the list of compounds (as an example), arranged in decreasing order of lambda max:

Without knowing the specific lambda max values for the four compounds, it is not possible to accurately arrange them according to lambda max.

Since the question was not complete and nowhere to be found, the answer is general. However, the solution is given with an example to make it simpler for you to solve.

Learn more about arrange the compounds here: brainly.com/question/26542827

#SPJ4

The freezing point of the solution is -3.53°C.

The Chemical equation of the HBr is -

              HBr → H⁺ + Br ⁻

Initial -     1         0      0

Final -      1-α     α       α

The total moles = 1 - α + α + α

                          = 1 + α

half factor = i = Total mol / Initial mol

                      = 1 + α / 1

                      = 1 + α

Now, Evolution in freezing point

                         ΔT f = i Kf m

                          kf = 1.86                                                (given)

   m(molality = mass of solute / solvent (Kg))

                        Δ T f  = (1 + α) × 1.86 × (mass/molar mass ) / solvent

   [ α = 90/100 = 0.9 because 90% ionised]

  putting the values in above equation -

                           = (1 + 0.9) × 1.86 × (8.1 × 1000) / 81 × 100(gm)

                              ΔT = 3.53°C

    Then freezing point T f =  T° f - ΔT

                            = 0 - 3.53°C

                           T f = -3.53°C

To learn more about Freezing point from given link

https://brainly.com/question/28182670

#SPJ4

Complete Question -

What is the freezing point of a solution containing 8.1 g HBr in 100gm. water assuming the acid to be 90% ionised:

[Kf for water =1.86Kmolarity^−1 ]

The basic formula says: Speed= Distance/Time . From this formula, it is evident that speed is directly proportional to distance and inversely proportional to time.

What is speed?

In everyday use and kinematics, the velocity of an object (commonly denoted by v) is the rate of change of position over time, or the rate of change of position per unit time. Therefore it is a scalar quantity. Average velocity of an object within a time interval is the distance traveled by the object divided by the duration of the interval Instantaneous velocity is the limit of average velocity when the duration of the time interval approaches zero. Velocity is not the same as speed.

The basic formula says: Speed= Distance/Time . From this formula, it is evident that speed is directly proportional to distance and inversely proportional to time.

To know more about Speed visit:

https://brainly.com/question/13943409

#SPJ4

The IR spectrum of ethene is rather simple due to its simple structure.

The interpretation of infrared spectra involves the connection of absorption bands in the spectrum of an unknown composite with the known absorption density for types of bonds,

The right-hand part of the infrared spectrum of ethane, wavenumbers ~1500 to 400 cm-1 is examined in the fingerprint region. This is a very neat tool for interpreting IR spectra.

So we can conclude that Interpretation of the infrared spectrum of ethene​​ There are osmosis bands at ~1400 cm-1 due to scissoring H-C-H vibrations and ~3100 cm-1 from H-C-H

Learn more about spectrum here: https://brainly.com/question/21134950

#SPJ1

Answer: The place where the kinetics energy is the highest is where the ball struck the ground.

Option C) "are digested by proteases into both opiate and non-opiate peptides" is the correct response.

Like all other propeptides, the opioid propeptides is a protein precursor that must be cut into a smaller form to become active. Proteases convert the opioid propeptides into opiate and non-opiate peptides, the latter of which may or may not be active. Enkephalins, endorphins, and dynorphins, which are opiate peptides, work by blocking secondary systems, such as those that affect how pain is perceived.

The opioid receptors are essential signalling molecules in the brain that the leucine-enkephalin binds to. They include four peptide bonds in total. These are naturally occurring ligands that function as neurotransmitters and have morphine-like properties.

To learn more about Enkephalins please click on below link

https://brainly.com/question/20357854

#SPJ4

Here is a Lewis structure for the ether [tex]C_2H_5OC_2H_5[/tex]:

C

|

H-C-H

|

O-C-H

|

H-C-H

|

H

Each carbon atom has four valence electrons and each hydrogen atom has one valence electron. The oxygen atom has six valence electrons. In the Lewis structure, the valence electrons are represented as dots and the chemical bonds between atoms are represented as lines. The Lewis structure shows that there are two C-H bonds and one C-O bond in the ether molecule.

Learn more about Lewis structure: https://brainly.com/question/20300458

#SPJ4

Automobiles and trucks pollute the air with NO. At 2000.0°C, Kc for the reaction At 2000.0°C Kc = 4.100 × 10–4 and H° = 180.6 kJ.  3.3396 * 10⁻³⁰ is the value of Kc at 39.00°C.

When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.

In a chemical reaction, reactants undergo a chemical reaction and transform into products through a chemical process. For instance, when humans breathe in oxygen, it combines with glucose to create carbon dioxide, water, and energy. The response is provided below. C6H12O6 + 6O2 → 6CO2 + 6H2O + Energy.

ln ( K₂ / K1 ) = ( 1 / T1 - 1 / T₂)

K₂ is rate constant at temperture T₂

K₁ is rate constant at temperature T₁

K₁ = 4.100 × 10–4

T₂ = 321 K

ΔH = 180.6 kJ

R = 8.314 mole ⁻¹

Ln ( K₂ /  4.100 × 10–4 ) = 180.6 * 10 ³ / 8.314 ( 1 / 2273 - 1 / 312 )

=  - 60.066

K₂ = 3.3396 * 10⁻³⁰

Thus,  3.3396 * 10⁻³⁰ is the value of Kc at 39.00°C.

To learn more about reaction, follow the link;

https://brainly.com/question/3664113

#SPJ4

The Kc value for the reaction at 39 degree celsius can be determined using the Clausius - Clapeyron equation. The Kc value is obtained to be 2.3 × 10⁻⁴.

The Clausius -Clapeyron equation is used find the reaction constant at two different temperatures using the expression written below:

[tex]\rm ln \frac{K _{2}}{K_{1}} =\frac{ H^{0} }{R} [\frac{1}{T_{1}} -\frac{1}{T_{2}} ][/tex]

Where, R is the universal gas constant, H be the enthalpy of the reaction.

Given that T1 = 39 °C

T2 = 2000 °C

H° = 180.6 kJ.

K2 = 4.1 × 10⁻⁴.

Then ln ( 4.1 × 10⁻⁴/ K1) = 180.6 kJ/ 8.314 J/°C [1/39 - 1/2000]

K1 = 2.3 × 10⁻⁴.

Therefore, the Kc value at a temperature of 39 degree Celsius is  2.3 × 10⁻⁴.

To find more on Clausius - Clapeyron equation, refer here:

https://brainly.com/question/13162576

#SPJ4

There are so many types of chemical reaction reaction like combination reaction, double displacement reaction, nucleophilic substitution reaction etc. Therefore, the product formed is 2-ethyl-butan-2-ol and 3 methyl- pentan-2-ol respectively.

One nucleophile substitutes another in a family of organic reactions known as nucleophilic substitution reactions.

SN1 is a nucleophilic substitution reaction. Leaving group, a nucleophile, electrophile and a solvent are present. Two types of enantiomers can be formed in the reaction depending on the preference of the nucleophile. The first step is the slowest because a bond is being broken to form carbocation. The product is 2-ethyl-butan-2-ol. If attack is via SN2 then the product formed is 3 methyl- pentan-2-ol.

Therefore, the product formed is  2-ethyl-butan-2-ol and 3 methyl- pentan-2-ol respectively.

To Learn more about the nucleophilic substitution reaction, here:

https://brainly.com/question/28097754

#SPJ4

The freezing point depression of of 17.1 grams of sucrose in 500.0 grams of water is −0.186°C.

A solution's freezing point is lower than that of the pure solvent's.

The term "freezing point depression" is used to describe this phenomena.

DT = (Kf) is the formula for the freezing point depression (m)

The freezing point depression is represented by T f =  T° f - ΔT

The pure solvent's freezing point is T°f.

The solution's freezing point is ΔTf.

Kf is the solvent's molal freezing point depression constant.

The value of Kf is typical for the particular solvent.

Kf is measured in °C/m units.

The solution's molality is given by m.

m is the amount of solute per kilogram of solvent.

m = kilogram of solvent/moles of solute

The molecular weight of sucrose is

12(12.01) + 22(1.01) + 11(16.00) = 342.34 g/mole

The number of moles of Sucrose = 17.1 / 342.34 = 0.05moles

and the concentration of the solution in moles per kilogram of water is

0.05 moles / 0.500 kg H₂O = 0.1 molal

By taking the freezing point constant for water as 1.86

Δ T f = 1.86°C/m × 0.1 m

Δ T f = 0.186

Because the freezing point of pure water is 0°C, the sucrose solution freezes at –0.186°C.

To learn more about Freezing point depression of solution from given link

https://brainly.com/question/27184453

#SPJ4

Complete Question -

What is the freezing point depression of of 17.1 grams of sucrose

(C12H22O11) in 500.0 grams of water?

The enthalpy changes for each of the following reactions are:

The difference between total reactant and total product molar enthalpies estimated for substances in their standard states is the standard enthalpy of reaction for a chemical process. The quantity of heat evolved or absorbed in a process under constant pressure is referred to as enthalpy change. It is assigned the symbol ΔH, interpreted as "delta H".

Enthalpy is the product of internal energy and pressure multiplied by volume. We can't measure a system's enthalpy, but we can look at variations in enthalpy. The sum of internal energy (U) and the product of pressure (P) and volume (V) equals enthalpy (H) (V). The system's heat added or lost is quantified as a change in enthalpy (H), not the actual amount of heat.

To learn more about enthalpy change, here

https://brainly.com/question/29556033

#SPJ4

We are aware that one Avogadro constant (N a=6.022*1023; Na =6.022*1023 ) equals one mole of any substance. Since MM=197 g/mol --> n= 8.87 g/197 g/mol 0.450*10-2 mol in this instance.

Determine the substance's molecular weight in units of one mole, then divide the molar mass value by the molecular mass, and multiply the result by the Avogadro constant to get the required number of molecules.

Auric chloride (AuCl3) and chloroauric acid are the most prevalent gold compounds (HAuCl4). Aqua regia is a solution made by combining one component of nitric acid with three parts of hydrochloric acid (because it dissolved gold, the King of Metals).

to know more about mass here:

brainly.com/question/28180102

#SPJ1

​

​

​

​

​

​

​

In order to heat a round bottom flask in a heating mantle, plug the heating mantle into a variac or powermite.

A chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance is known as a chemical reaction.

In order to heat a round bottom flask in a heating mantle we have to plug the heating mantle into a Variac or Powermite which is typically used for controlling the temperature level. Turn the heat up gradually, and do not exceed 50-60% of the maximum output of the device, it advised to do so to avoid any electrical issues such as overloading, short-circuit etc.

Learn more about round bottom flask from the link given below.

https://brainly.com/question/13339404

#SPJ4