The force as a function of displacement of a moving object is presented by the graph. How much work is done when the object moves from 5 m to 8 m? *

Answer:

Explanation:

If we ignore wind resistance, the time needed for the hay to drop from vertical rest is

t = √(2h/g) = √(2(300)/9.81) = 7.82 s

d = vt = 80.0(7.82) = 626 m before passing over the cow.

Answer:

d.

Explanation:

Radiometric dating is a method of dating geological/ archaeological specimens by determining the relative proportions of particular radioactive isotopes present in a sample. Carbon dating is a form of radiometric dating, but, in choice b, you're not comparing the carbon to the rock. One would compare ¹⁴C levels within the organic compound, just as one would compare radioactive isotope levels in a rock.

Answer:

[tex]\frac{a_{d}}{a_{i}} = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

Explanation:

Always draw a diagram!

Up the incline:

[tex]Fr_{max}[/tex] = maximum friction

[tex]Fr_{max}[/tex] = μk

k = R = mg.cos(45) = mg.sin(45)

Resolution of forces parallel to the slope:

F (Fp in the diagram) = force of propulsion

g = gravity

[tex]F - Fr_{max} = ma_{i}[/tex]

[tex]F -[/tex] μ.mg.cos(45) [tex]= ma_{i}[/tex]

Down the decline:

Resolution of forces:

[tex]mg.sin(45) - Fr_{max} = ma_{d}[/tex]

[tex]mg.sin(45) -[/tex] μ.mg.cos(45) [tex]= ma_{d}[/tex]

Then, find the ratio:

[tex]\frac{ma_{d}}{ma_{i}} = \frac{mg.sin(45) - mu.mg.cos(45)}{-F + mu.mg.cos(45)} \\\\ \frac{a_{d}}{a_{i}} = \frac{k - k.mu}{-F + k.mu} \\\\ = \frac{k(1 -mu)}{-F + k.mu}[/tex]

Potentially, there is no need to consider F in this situation, in which case:

[tex]\frac{a_{d}}{a_{i}} = \frac{k(1 -mu)}{k.mu} \\\\ = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

Answer:

Explanation:

Ignoring friction, the acceleration will double

F = ma

2F = m(2a)

Answer:

Explanation:

Conservation of momentum

a) the man and skateboard move to the right.

b) His speed depends on the reference frame of the ball speed.

If the speed of the ball is 10 m/s relative to ground and the man's final speed is v, then.

(75 + 20)(0) = 20(10) + 75(v)

v = -200/75 = -2.6666...

|v| = 2.7 m/s relative to the ground

This is the likely answer they are seeking.

If the ball is thrown with a speed of 10 m/s relative to the man

(70 + 20)(0) = 20(v + 10) + 75v

20v + 200 = - 75v

          200 = - 95v

               v = -2.105... m/s velocity or a speed of

              |v| = 2.1 m/s relative to ground

and the ball has a velocity of 10 - 2.1 = 7.9 m/s relative to ground.

The initial temperature of the metal bolt is 80.8 °C

We'll begin by calculating the heat absorbed by the water.

Q = MCΔT

Q = 0.15 × 4184 × 4

Q = 2510.4 J

Finally, we shall determine the initial temperature of the metal bolt.

Q = MC(T₂ – T₁)

–2510.4 = 0.050 × 899 (25 – T₁)

–2510.4 = 44.95 (25 – T₁)

Clear bracket

–2510.4 = 1123.75 – 44.95T₁

Collect like terms

–2510.4 – 1123.75 = –44.95T₁

–3634.15 = –44.95T₁

Divide both side by –44.95

T₁ = –3634.15 / –44.95

T₁ = 80.8 °C

Thus, the initial temperature of the metal is 80.8 °C.

Learn more about heat tranfer:

https://brainly.com/question/26034272

The mass of block 1 will be 1.99 kg.The tension force is applied along the whole length of the wire, pulling energy equally on both ends.

The tension force is described as the force transferred through a rope, string, or wire as it is pulled by opposing forces.

Given that,

Mass of block 1=? kg

The coefficient of the kinetic friction,μ=0.200

Now consider the weight component in the uphill direction.The weight is found as;

[tex]\rm W=m_1gsin \theta[/tex]

The force is balanced in the vertical direction as;

[tex]\rm T=F_f-W[/tex]

When the force of friction is;

[tex]\rm F_F=\mu_k N[/tex]

[tex]\rm F_f=(m_1 gcos \theta)[/tex]

Substitute the value in the vertical balanced equation;

[tex]\rm T=m_1gsin(27.5)^0-\mu_kmgcos27.5^0[/tex]

[tex]\rm T-m_2g=0\\\\T=m_2g[/tex]

[tex]\rm (10.1) g=m_1g(0.699-0.2 \times(-0.714) ) \\\\ (10.1) g=m_1g (0.699+0.1428) \\\\\ (10.1) g= m_1 \times 0.8418 \\\\ m_1 =11.99 \ kg[/tex]

Hence the mass of block 1 will be 1.99 kg.

To learn more about the tension force refer to the link;

https://brainly.com/question/2287912

#SPJ2

Answer:

3,958.8 mi

Explanation:

A force of 50 N was applied to an object with a mass of 5 kg, then the acceleration of the object will be 10 m/s².

The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.

Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well. The definition of acceleration is the change in velocity vector over a time interval divided by the time interval.

There are several types of acceleration :

According to the question, the given values are :

Force, F = 50 N

Mass, m = 5 kg

Force = m × a

a = 50 / 5

a = 10 m/s².

Hence, the acceleration of the object will be 10 m/s².

To get more information about acceleration :

https://brainly.com/question/2303856

#SPJ2

If the speed of the magnet is doubled, the induced voltage is twice as great

Faraday's law of induction states that whenever relative motion exists between a coil and magnetic field, a voltage will induce in the circuit and this voltage is proportional to the rate of change of the flux. The expression for the motional emf is as follows:

ε=Blv

Here, ε is the motional emf, B is the magnetic field, l is the length of the conductor, and v is the velocity at which the magnetic field changes.

The induced voltage by the moving magnet is directly proportional to the speed of the magnet. Therefore, an increase in the speed of the magnet will increase the induced voltage.

If the speed of the magnet is doubled, the induced voltage is twice as great

Find out more at: https://brainly.com/question/13369951

Answer:

An ammeter has a zero offset error. This fault will affect. neither the precision nor the accuracy of the readings. only the precision of the readings.

The accuracy of the present measurement will be impacted by an ammeter's zero offset inaccuracy, but the precision of the measurement will not change.

Resistance is the obstruction of electrons in an electrically conducting material.

voltage = current ×resistance

How accurate measurement or reading is may be determined by its accuracy. The measurements will be off because of zero inaccuracy.

Thus, The precision of the measurement would not alter if an ammeter made a mistake with its zero offsets, but the accuracy of the current measurement would be decreased.

To learn more about resistance, refer to the link;

brainly.com/question/14547003

#SPJ2

The amount of work done by the hairdryer is equal to 450 Kilojoules.

Given the following data:

To determine the amount of work done by the hairdryer:

Mathematically, the work done by an object with respect to power and time is given by the formula:

[tex]Work\;done = power \times time[/tex]

Substituting the given parameters into the formula, we have;

[tex]Work\;done = 750 \times 600[/tex]

Work done = 450,000 Joules

Note: 1000 Joules = 1 Kilojoules.

Work done = 450 Kilojoules.

Read more: https://brainly.com/question/13818347

Answer:

Explanation:

F = kx = 65 N/m(0.94 m) = 61.1 = 61 N

The initial velocity of the 3250 Kg mass is 2.1 m/s. The distance covered by the larger mass in 5s is 4.7 cm.

In this problem, we have to apply the law of conservation of linear momentum. Note that;

Momentum before collision = Momentum after collision

m1u1 + m2u2 = m1v1 + m2v2

(2150 × 10) + (3250u1) = (2150 + 3250)5.22

21500 + 3250u1 = 5400 × 5.22

3250u1  = 28188 - 21500

u1 = 28188 - 21500/3250

u1 = 2.1 m/s

2) Again from the principle of conservation of linear momentum;

(0.40 × 3.5) + (0.60 × 0) = (0.40  × 0.70) + (0.60 × v2)

1.4 = 0.28 + 0.60v2

1.4 - 0.28 =  0.60v2

v2 = 1.87 cm/s

Using;

s = 1/2 ( u + v)t

s = 1/2(0 + 1.87) × 5

s = 4.7 cm

Learn more: https://brainly.com/question/8898885

Answer:

I hope you liked my answer. Thank You!

[tex]\huge\color{pink}\boxed{\colorbox{black}{Answer ☘}}[/tex]

12 mC

We are given that...

[tex]C_{1} = 4mF \\ V_{1} = 50v \\ C_{2} = 6mF \\ V_{2} = 30v \\ \\ we've \: to \: find \: the \: final \: charge \: on \: the \: 6mF \\capacitor \:- \\ \\ we \: know \: that ,\: \\ Q = CV \\ \\ using \: the \: formula \: \\ Q_{1} = 4 \times 50 = 200mC \\ Q_{2} = 6 \times 30 = 180mC \\ \\ total \: charge , \: Q_{1} - Q_{2} = 200 - 180 = 20mC \\ \\ let \: V \: be \: the \: final \: potential \: \\ 4V + 6V = 20mC\\ 10V = 20mC \\ V = \frac{20}{10} = 2V \\ final \: charge \: Q = CV = 6 \times 2 = 12mC[/tex]

therefore,

hope helpful~

Answer:

A. 340 meters/second

I think this is the right answer.

Answer: I think its zero-

I dont really know about this...

Answer:

Water speed Plays a key role In determining The shape of it

Answer:i am pro

kExplanation:

Answer:

Neutrons

Explanation:

Answer:

Earth's magnetic field (and the surface magnetic field) is approximately a magnetic dipole, with the magnetic field S pole near the Earth's geographic north pole (see Magnetic North Pole) and the other magnetic field N pole near the Earth's geographic south pole (see Magnetic South Pole). This makes the compass usable for navigation. The cause of the field can be explained by dynamo theory. A magnetic field extends infinitely, though it weakens with distance from its source. The Earth's magnetic field, also called the geomagnetic field, which effectively extends several tens of thousands of kilometres into space, forms the Earth's magnetosphere. A paleomagnetic study of Australian red dacite and pillow basalt has estimated the magnetic field to be at least 3.5 billion years old

The average momentum of Cart 1 during the entire time shown before the collision is 0.24 kgm/s.

The given parameters:

The average velocity of the cart 1 before collision is calculated as follows;

[tex]v = \frac{\Delta x}{\Delta t} \\\\v = \frac{0.55 - 0.31}{0.5 - 0} \\\\v = 0.48 \ m/s\\\\[/tex]

The average momentum of Cart 1 during the entire time shown before the collision is calculated as follows;

[tex]P = mv\\\\P = 0.5 \times 0.48\\\\P = 0.24 \ kgm/s[/tex]

Learn more about average momentum here: https://brainly.com/question/12979244

Answer:

Explanation:

The father of the Multitude was Abraham. And he did precede the 10 commandments. But the story really has nothing to do with the 10 commandments.

He obeyed God's Command because it was God who issued it. Abraham had complete faith in God's ability to make things come out right. The sacrifice of Isaac was a test of faith.

I would advise you to answer true, but whoever wrote the question employed a twisted kind of logic. The sacrifice of Isaac had nothing to do with the 10 commandments. Thou Shalt not murder is not really covered by this circumstance.

So true might not be the correct answer. The question is very complex and does not lend itself to a simple True/ False answer.

The region a represents the distance of the electron from the nucleus.

According to the wave mechanical model of the atom, the probability of finding an electron within a given volume element (representing the atom) is the square of the wave function psi.

Since a is the region in space where there is the greatest probability of finding the electron in the atom, it follows that distance of the electron form the atom is always a.

Learn more about the wave mechanical model: https://brainly.com/question/1382157

Answer:

Explanation:

a = F/m = 7500/2000 = 3.75 m/s²

v² = u² + 2as

s = (v² - u²) / 2a

s = (0² - 45²) / (2(-3.75))

s = 270 m

Answer:

Mechanical energy into electrical energy

Explanation:

Answer:

ExplanMechanical energy into electrical energy

SIation:

Explanation:

Downstream: you just sum the magnitude of the velocity vectors:

3km/h + 4km/h = 7km/h

Upstream: difference of the magnitudes of the velocity vectors, in absolute value:

|3km/h - 4km/h| = 1km/h

Hi there!

We can use the work-energy theorem to solve.

Recall:

[tex]\large\boxed{E_i = E_f}}[/tex]

Initial energy = final energy

The initial energy is purely potential (she starts from rest), and, if we assign the bottom of the slope as the 0 line, her energy at the bottom is purely kinetic.

PE = mgh

KE = 1/2mv²

We can begin by setting the two equal:

mgh = 1/2mv²

Cancel out the mass and rearrange to solve for velocity:

2gh = v²

v = √2gh

Plug in given values and use g ≈ 10 m/s²:

v = √2(10)(20) = 20 m/s