0.22 moles
Explanation:Moles are a measurement used in chemistry that describes the amount of an atom based on the number of atoms. One mole is equal to [tex]6.022*10^{23}[/tex], which is the number of atoms in 12 grams in Carbon-12.
Mass of Copper
Before finding the moles of copper, we need to know the mass. We are told that a door handle is 140g, but only 10% is copper.
To find 10% for 140 we can multiply 140 * 0.1.
140 * 0.1 = 14This means there are 14 grams of copper.
Moles of Copper
Now, we can use dimensional analysis to convert grams to moles. To do this we need to know how many grams of copper are in 1 mole. This number is called the molecular mass and can be found on the periodic table. This number is usually directly below the element's symbol and is the only number with decimal points (not all periodic tables will have the exact same molecular mass because the number can change, but they will be close).
The molecular mass for copper is 63.55. Next, we can set up a dimensional analysis conversion. Dimensional analysis is when you multiply some value by a ratio of 2 different values with 2 different units. This may sound confusing but it makes more sense when you do it.
[tex]14 g*\frac{1 mole}{63.55g}[/tex]When setting up an expression like this, make sure that the units cancel out so you are only left with the one you want. Units will cancel out if one is in the numerator of a ratio and the other is in the denominator.
Next, multiply this out (which is equivalent to dividing 14/63.55)
[tex]14 g*\frac{1 mole}{63.55g} = 0.22 moles[/tex]So, when rounded to significant figures, there are 0.22 moles in 14 grams of copper.
Name the following carboxylic acid
COOH
A. 3-ethyl-2-methylheptanoic acid
B. 2-ethyl-1-methylhexanoic acid
C. 2-methyl-3-ethylheptanoic Acid
The name of the carboxylic acid would be 2-methyl-3-ethylheptanoic acid.
Naming or carboxylic acids
Carboxylic acids are named based on the longest carbon chain and the counting starts from the carboxylic acid's functional group.
Thus, in this case, the compound would be a heptanoic acid because the longest chain towards the functional group has 7 carbons.
This means 2 branches exist in the compound. The first one has a single carbon while the second one has 2 carbon atoms. This means they are methyl and ethyl groups respectively.
The branches are located on the second and third carbon on the main chain. Thus the compound's name is 2-methyl-3-ethylheptanoic Acid.
More on naming organic compounds can be found here: https://brainly.com/question/14490090
#SPJ1
Which indicator most likely suggests that a chemical change is taking place?
change in size
change of color
Ochange of state
O change in shape
Answer:
change of color
Explanation:
One or more of the following events can indicate that a chemical reaction has occurred: The reaction flask's interior has undergone a color shift. A change in color and the appearance of bubbles are two indications of a chemical shift. The correct option is B.
A large variety of various observable characteristics, such as color change, energy change (temperature change or light produced), gas production, precipitate formation, and property change, can be used to detect chemical reactions.
An indicator is a chemical substance that modifies color when an acid or base is present. Indicators are often mildly acidic or basic in nature and originate from plant pigments.
Thus the correct option is B.
To know more about indicators, visit;
https://brainly.com/question/30890652
#SPJ5
The following data was collected when a reaction was performed experimentally in the laboratory. Reaction Data Reactants Products Fe2O3 Al Al2O3 Fe Starting Amount in Reaction 3 moles 5 moles ? ? Determine the maximum amount of Fe that was produced during the experiment. Explain how you determined this amount.
The maximum amount, in grams, of Fe that would be produced during the experiment, will be 280 grams
Sotichiometric calculationFrom the equation of the reaction:
[tex]Fe_2O_3 + 2Al -- > 2Fe + Al_2O_3[/tex]
The mole ratio of [tex]Fe_2O_3[/tex] to Al is 1:2.
But 3 moles and 5 moles of reactants respectively started the reaction. Thus, Al is limited in availability and will determine the amount of products that will be produced.
The mole ratio of Al and Fe is 1:1, therefore, a maximum of 5 moles of Fe will be produced from the reaction.
5 moles Fe = 5 x 56 = 280 grams
More on stoichiometric calculations can be found here: https://brainly.com/question/27287858
#SPJ1
HELPPPPPP 25 POINTS Which of the following recommendations would be the best option to reduce the effects of the feedback loop pictured above?
Question 24 options:
Run the the air conditioning unit for a longer time to cool the surrounding air.
Build city building in a close grid pattern to disperse the heat energy.
Use energy sources that do not release greenhouse gases into the atmosphere.
Answer:
Use energy sources that do not release greenhouse gases into the atmosphere.
Explanation:
If you use energy that does not release greenhouse gases such as CO2 then the heat won't be trapped in our environment, thus less chances of global warming. Option A is nonsense, B does not make sense either. C is the only valid way.
Calculate the mass (in grams) of 3.85 x 1024 carbon atoms.
Round your answer to two decimal places.
Answer:
You can get to the answer in two steps:
calculate: 3.40⋅1022 atoms = x mol ?
using Avogadro's constant.
calculate: x mol = ? grams,
using the atomic mass of Helium.
Step 1
Avogadro's constant says that 1 mole of any atom contains 6.022⋅1023 atoms. In this case you have 3.40⋅1022 atoms:
3.40⋅1022atoms6.022⋅1023atomsmol = 5.65⋅10−2mol
Step 2
The atomic mass of helium (He) will give you the weight of one mole of this molecule: 1 mol = 4.00 gram:
4.00gmol⋅5.65⋅10−2mol = 0.226g
So the 3.40⋅1022 helium atoms weigh 0.226 gram.
What is the relationship between the enthalpy (AH) and entropy (AS) of a
reaction that is spontaneous at higher temperatures but not at lower
temperatures?
The relationship between the enthalpy (ΔH) and entropy (ΔS) of a
reaction that is spontaneous at higher temperatures but not at lower
temperatures is +ΔH, - Δs.
Relationship between enthalpy and entropy
The relationship between enthalpy (ΔH) and entropy (ΔS) is given by Gibs free energy.
ΔG = ΔH - TΔs
When ΔH < 0 and Δs < 0, ΔG = -ve (-ΔH, - Δs) (for lower temperature)
Also, when ΔH < 0 and Δs = +, ΔG = -ve (-ΔH, +Δs) (for all temperature)
When ΔH > 0 and Δs < 0, ΔG = -ve (+ΔH, - Δs) (for higher temperature)
Thus, the relationship between the enthalpy (ΔH) and entropy (ΔS) of a
reaction that is spontaneous at higher temperatures but not at lower
temperatures is +ΔH, - Δs.
Learn more about enthalpy here: https://brainly.com/question/14047927
#SPJ1
A sample of P2Cl5 contains 179 g of phosphorous, how many grams of chlorine are present? Please show step by step thx!
Answer:
About 512 g.
Explanation:
We are given a sample of P₂Cl₅ that contains 179 grams of phosphorus, and we want to determine the grams of chlroine that is present.
Thus, we can convert from grams of phosphorus to moles of phosphorus, moles of phosphorus to moles of chlorine, and moles of chlorine to grams of chlorine.
From the formula, there are two moles of P for every five moles of Cl. The molecular weights of P and Cl are 30.97 g/mol and 35.45 g/mol, respectively. Hence:
[tex]\displaystyle 179\text{ g P} \cdot \frac{1\text{ mol P}}{30.97\text{ g P}} \cdot \frac{5\text{ mol Cl}}{2\text{ mol P}} \cdot \frac{35.45\text{ g Cl}}{1\text{ mol Cl}} = 512\text{ g Cl}[/tex]
In conclusion, there is about 512 grams of chlorine present in the sample.
Alternatively, we can mass percentages. The mass percent of phosphorus in P₂Cl₅ is:
[tex]\displaystyle \% \text{P} = \frac{2(30.97)}{5(35.45) + 2(30.97)} = 25.90\%[/tex]
Because there are 179 grams of phosphorus, the total amount of sample present is:
[tex]\displaystyle \begin{aligned} 25.90\% \cdot m_T & = 179\text{ g P} \\ \\ m_T & = 691.1 \text{ g}\end{aligned}[/tex]
Therefore, the amount of chlorine present is 691.1 g - 179 g, or about 512 g, in agreement with our above answer.
Lab: Plate Boundaries and Movement Lab Report.
A Plate Boundaries and Movement Lab Report is a report that shows the records of all the data relating to the movement of Plate Boundaries and their movements.
What are Plates in this context?A tectonic plate is also described or referred to as a Lithosperic Plate. In Geography, it is described as a slab of rock that is not shaped regularly.
In most cases, it comprises continental and oceanic lithosphere.
Why is it crucial to record the movement of plates and their boundaries?Plate Boundaries and their movement are largely linked to volcanic activities and earthquakes. This means that they can be used to predict when any of the above-mentioned events may happen.
Learn more about plate boundaries at:
https://brainly.com/question/21668651
#SPJ1
Name the two geometrical isomer of hydrocarbon
Answer:
alkenes and cyclic compounds
what is the formula to find the volume of a marble
Individual marble:
4/3_?_ R^3Answer:
Individual Marble
Use the formula 4/3_?_ R^3, to solve for the volume. Here, R is the radius, or half of D. ^3 means the radius is cubed.
Explanation:
This is an impossible formula. If it were real, determine the molar mass of:
Cr4(PO4)3
Answer:
Molar Mass (Cr₄(PO₄)₃): 492.894 g/mol
Explanation:
First, collect the individual molar masses of each element. These values are found on the periodic table under each respective element.
Chromium (Cr): 51.996 g/mol
Phosphorus (P): 30.974 g/mol
Oxygen (O): 15.999 g/mol
The quantity of each element is determined by the subscript next to it. If their is a subscript directly to the right of a set of parentheses, multiply each element within the parentheses by the subscript.
Chromium (Cr): 4
Phosphorus (P): 1 x 3 = 3
Oxygen (O): 4 x 3 = 12
Finally, the total molar mass of the compound is the collective molar masses of each element times the quantity of each element.
Molar Mass (Cr₄(PO₄)₃): 4(51.996 g/mol) + 3(30.974 g/mol) + 12(15.999 g/mol)
Molar Mass (Cr₄(PO₄)₃): 492.894 g/mol
where would you find water on the ph scale?
Answer: between 6.5 and 8.5
Explanation:
As shown in my science book it appears in the ph scale
Sugar (C12H22011) is a molecular substance. Which of the following properties would you expect it to
have?
a. conducts electricity in water
b. doesn't dissolve in water
c. held together by opposite charges
d. low melting point
What is the boiling point of liquid c when the
Answer:
100 degree is the answer of given statement
Three elements, A, Q, and Z, have the molar masses indicated in the table below. Given a compound with a composition of 15.66% A and 84.34% Z by mass, what is the empirical formula of this compound?
element symbol molar mass
A 15.45 g/mol
Q 20.05 g/mol
Z 41.62 g/mol
Answer:
AZ₂
Explanation:
The formed compound will not contain Q because mass percentages, %A and %B, form 100% of the compound.
Steps
Change % of each element into grams.Convert grams of each element into moles by dividing grams by molar mass.Divide all moles by the smallest number of moles.If the moles are all whole numbers, then you’re done and that’s your empirical formula.If not, multiply all moles by number such that everything is a whole number.Solving
We have 15.66g of A and 84.34g of ZMoles of A, n(A) = 15.66/15.45 = 1.01 molesMoles of Z, n(Z) = 84.34/41.62 = 2.02 molesA = 1.01/1.01 = 1 and Z = 2.02/1.01 = 2Therefore, the empirical formula is AZ₂What is the pH of a 4.2 x 10^-3 solution of HCl?
Answer:
pH = 2.38
Explanation:
Recall that HCl is a strong acid and hence dissociates completely into H⁺ and Cl⁻ ions. Thus, the solution's H⁺ concentration is equivalent to the acid concentration. That is, [H⁺] = 4.2 × 10⁻³ M.
Therefore, the pH of the solution is:
[tex]\displaystyle \begin{aligned}\text{pH} & = -\log[\text{H}^+] \\ \\ & = -\log (4.2\times 10^{-3}) \\ \\ & = 2.38\end{aligned}[/tex]
Answer:
HCl + H[tex]\\ 2[/tex]O —> Cl- + H[tex]\\ 3[/tex]O+
pH = -log [H[tex]\\ 3[/tex]O+] = -log [4.2 x 10^-3] = 2.38
—
We assume that hydrochloric acid will undergo complete dissociation in water to give stoichiometric H3O+ ion, according to the given reaction.
—
Have a nice day!!
A 3.24-gram sample of NaHCO3 was completely decomposed in an experiment.
2NaHCO3 → Na2CO3 + H2CO3
In this experiment, carbon dioxide and water vapors combine to form H2CO3. After decomposition, the Na2CO3 had a mass of 2.19 grams.
Determine the mass of the H2CO3 produced.
Calculate the percentage yield of H2CO3 for the reaction. Show your work or describe the calculation process in detail.
PLEASE HELP, WILL MARK BRAINLIEST!!!
Mass of H2CO3 = 1.05g
Givens: NaHCO3 = 3.24
Na2CO3 = 2.19
Mass of H2CO3 = mass of NaHCO3 - mass of Na2CO3
Mass of H2CO3 = 3.24g - 2.19g
Mass of H2CO3 = 1.05g
How do you find the mass number?The number of protons and the number of neutrons combine to determine the mass number of an element. Mass number = proton + neutron. If you want to calculate the number of neutrons an atom has, you can simply subtract the number of protons or atomic numbers from the mass number.
Divide the mass of a substance in grams by the molecular weight. This will give you the number of moles of the substance in a particular mass. For 12 g of water, (25 g) / (18.015 g / mol) = 0.666 mol.
Learn more about decomposition reaction here: https://brainly.com/question/27300160
#SPJ2
Complete the chart on the characteristics of bonds
Answer:
Face value. Corporate bonds normally have a par value of $1,000, but this amount can be much greater for government bonds.
Interest. ...
Coupon or interest rate. ...
Maturity. ...
Issuers. ...
Rating agencies. ...
Tools and tips.
Explain the relashionship between carbon dioxide, the human population and use of fossil fuels.
Answer:
More people means more demand for oil, gas, coal and other fuels mined or drilled from below the Earth's surface that, when burned, spew enough carbon dioxide (CO2) into the atmosphere to trap warm air inside like a greenhouse
Explanation:
hope this helps
pls mark brainliest
A substance was analyzed and found to have a pH of 3 and turn blue litmus paper to red. The substance is most likely
The electron configuration of an element is shown below.
1s^22s^22p^5
Name the group this element belongs to in the periodic table and explain your answer. Based on the electron configuration, explain how many electrons it is likely to receive from the atom of another element during the formation of a bond.
Answer:
Fluorine 1s2 2s2 2p5
Explanation:
it is likely to receive 1 electron
https://brainly.com/question/26010375
In the periodic table, this element belongs to the 17th group. As a result, the element has a tendency to gain one electron during bond formation in order to achieve octet.
What is octet state?According to the octet rule, atoms are most stable when their valence shells contain eight electrons. The eight electrons that fill an atom's outermost shell are known as octets.The octet rule is significant because it predicts how atoms will bond based on their valence electrons' outer shells. Atoms form a certain number of bonds in order to share electrons with other atoms, resulting in an octet of eight electrons. For example, the outer shell of oxygen contains only six electrons.electronic configuration is:
[tex]1s^22s^22p^5[/tex]
The given element contains two electrons in the 2s orbital and five electrons in the 2p orbital. As a result, the energy level with n = 2 is the outermost energy level in this case. As a result, the element has 2 + 5, or 7 valence electrons. Elements with 7 valence electrons are classified as belonging to periodic table group 17.The element has 7 valence electrons, so it requires one more electron to achieve the stable octet state. As a result, the element has a tendency to gain one electron during bond formation in order to achieve octet.To learn more about octet rule, refer:
https://brainly.com/question/3876801
#SPJ2
Ionic bonds form between which two types of elements?
Answer:
Cation and anion.
Cation is a positive ion.
Anion is negative ion.
E.g.: NaCl, CaF2, KBr
Calculate the molarity of 0.060 moles NaHCO3 in 1500. mL of solution
Answer:
= 0.4 M
Explanation:
data:
moles = 0.060 moles
volume = 1500 ml
= 1500 / 1000
= 1.5 dm^3
solution;
molarity = [tex]\frac{no. of moles}{volume in dm^3}[/tex]
= 0.060 / 1.5
molarity = 0.4 M
3. How many grams are there in 5.5 mole of Sulfur [S=32].
Answer:
176g
Explanation:
Given :
moles = 5.5
molar mass (sulfur ) = 32u
given mass = ?
Solution:
mole = given mass/molar mass
5.5 = given mass/ 32
5.5×32=given mass
176 g = given mass
A balloon contains 7.2 L of
He. The pressure is reduced
to 2.00 atm and the balloon
expands to occupy a volume
of 25.1 L. What was the initial
pressure exerted on the
balloon?
Given:
Unknown:
Formula:
Solution:
Final Answer:
Apply Boyles law
P1V1=P2V27.2(2)=25.1P214.4=25.1P_2P_2=0.57atmRemember
If Volume is four times increased pressure is 4 times decreased
Which of the following indicates an endothermic reaction? I will mark as brainliest if correct.
Answer:
A + B → C + D + heat
Explanation:
A. A+B+heat⇒C+D
In an endothermic reaction, the system requires energy/heat, the enthalpy change is positive.
Which word equation shows lithium oxide being formed from the reaction between oxygen and lithium? oxygen lithium oxide right arrow. lithium lithium oxygen right arrow. lithium oxide oxygen lithium right arrow. lithium oxide lithium oxide right arrow. lithium oxygen
Answer:
lithium lithium (or 2lithium) + oxygen ->
Explanation:
Your welcome
In CuCl2(aq), the solvent is _____.
Answer: water
Explanation:
In aqueous solutions, water is the solvent.
When a solution is saturated, and additional solid solute is added, what happens?
Answer:
super saturation takes place.
Using the periodic table, which of the elements below would be a poor conductor of electricity, be a gas, and may have a color?
a. Zinc
b. Cobalt
c. Chlorine
d. Calcium