The planar simple harmonic wave travels in the positive direction of x axis with wave velocity u=2m/s, and the vibration curve of the particle at the origin in cosinusoidal form is shown in the figure.
Try to find (1) the vibration function of the particle at the origin, (2) the wave function of the planar simple harmonic wave according to the origin.

The ratio of the primary turns to the secondary turns is 1/3

The correct answer to the question is Option A. 1/3

From the question given above, the following data were obtained:

Ratio = Nₚ/Nᵣ

Nₚ/Nᵣ = 225 / 675

Nₚ/Nᵣ = 1/3

Therefore, the ratio of the primary turns to the secondary turns is 1/3

Complete question:

See attached photo

Learn more about transformer: https://brainly.com/question/17921540

18,000 degrees in one second i believe

[tex]\text{Given that,}\\\\\text{Acceleration, a = -3.2 m s}^{-2}\\\\\text{Time, t = 14 sec}\\\\\text{Velocity, v = 8 m s}^{-1}\\\\\text{Initial velocity, v}_0 = ?\\\\\\v = v_0 +at\\\\\implies v_0 = v -at = 8 -(-3.2)(14) = 8 + 44.8 =52.8~ \text{m s}^{-1}[/tex]

Answer:

analyze, assess or interpret an historical event, era, or phenomenon,.

Explanation:

Secondary sources are works that analyze, assess or interpret an historical event, era, or phenomenon, generally utilizing primary sources to do so. Secondary sources often offer a review or a critique. Secondary sources can include books, journal articles, speeches, reviews, research reports, and more.

Answer:

Explanation:

a) the acceleration of the puck on the rough ice.

a = μg = 0.550(9.81) = 5.3955 = 5.40 m/s²

 (comes from μ = F/N = ma/mg = a/g)

b) the distance from the end boards the puck is when it comes to a stop.

v² = u² + 2as

0² = 12.0² + 2(-5.40)s

s = 13.3 ft

so distance from the boards is

15.7 - 13.3 = 2.4 m

by the way...that's some VERY rough ice...more like sand.

Hi there!

Impulse = Change in momentum

I = Δp = mΔv = m(vf - vi)

Where:

m = mass of object (kg)

vf = final velocity (m/s)

vi = initial velocity (m/s)

Begin by converting grams to kilograms:

1 kg = 1000g ⇒ 145g = .145kg

Now, plug in the given values. Remember to assign directions since velocity is a vector. Let the initial direction be positive and the opposite be negative.

I = (.145)(-20 - 17) = -5.365 Ns

The magnitude is the absolute value, so:

|-5.365| = 5.365 Ns

Answer:120.3676

Explanation: using the molecular calculator and molar mass of MgSO4. hope this helps!

Answer:

Don't light up the firework or put less fire

Explanation:

Using Pharaoh's serpent or "black snake" firework could be  done to slow down their reaction.

Gunpowder is typically made using three reagents: potassium nitrate, carbon, and Sulphur. These kinds of elements are used in a combustion reaction that results in this detonation explosion. You have solid reagents reacting to produce gases in the form of solid potassium carbonate, solid potassium sulphate, nitrogen gas, and carbon dioxide gas.

The numerous metal salts that are added to produce the colours spread out all of that material, which is in a super-heated state. In such extremely intense environment, the metal salts heat up and get "excited," emitting light as a result.

If you want an explosion, you need the chemical reaction to go quickly in order to release a large volume of gas in a brief period of time. You might have a chemical reaction that happens rather slowly, like the Pharaoh's serpent or "black snake" firework.

Find more about fireworks in the link:

https://brainly.com/question/16737516

#SPJ2

Answer:

Thread.

Explanation:

The most common form consists of a cylindrical shaft with helical grooves or ridges called threads around the outside.

Answer:

Divergence generally means two things are moving apart while convergence implies that two forces are moving together. ... Divergence indicates that two trends move further away from each other while convergence indicates how they move closer together.

Explanation:

The tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex]

The given parameters:

The net force on the block system is calculated by applying Newton's second law of motion as follows;

Total mass of the block-system = 2 kg + 5 kg = 7 kg

The acceleration of the block-system;

[tex]a = \frac{T_i}{7}[/tex]

The tension in the cable between the blocks, T₂, is calculated as;

[tex]T_2 = m_2 a\\\\T_2 = 2a\\\\T_2 = 2 \times \frac{T_i}{7} \\\\T_2 = \frac{2T_i}{7}[/tex]

Thus, the tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex].

Learn more about acceleration of two connected block systems here: https://brainly.com/question/25939890

Answer:

Explanation:

The balloon would require a time of

t = d/v = 13.5/ (23.6cos38) = 0.7259...s

to travel the horizontal distance.

the vertical position relative to the throw point at that time is

h = 0 + (23.6sin38)(0.7259) + ½(-9.8)(0.7259²)

h = 7.9652...

so as long as the adjacent building is at least 8.0 m higher than the student position, the balloon is in the air for 0.726 s.

If the building is shorter than 8.0 m above the student, the balloon will land on the building roof and will be in the air for a longer period of time

Answer:

2.5 meters per second

Explanation:

stops half way which is 50m and if its at a constant speed of 2.5 meters multiply that by the seconds and you get 50m

The speed depends on the distance and time. The speed before the pop is 2.5 m/s.

The speed of an object is defined as the total distance traveled by the object within a given time interval.

Given that the diameter of the roundabout is 100m. It takes you 20 sec to come to a complete stop.

While slowing down, you continue to drive in a circle and you stop halfway around the loop. It means that the half distance is 50 m. The speed is calculated as given below.

[tex]s = \dfrac {D}{t}[/tex]

[tex]s = \dfrac {50}{20}[/tex]

[tex]s = 2.5 \;\rm m/s[/tex]

Hence we can conclude that the speed before the pop is 2.5 m/s.

To know more about the speed, follow the link given below.

https://brainly.com/question/12759408.

Answer:

Explanation:

Not sure what your options are but anything that says something like

"at the block surface in contact with the ramp along the line from V to Z"  is probably a good shot.

Answer:

Explanation:

designer

illusionist

engineer

entrepreneur

salesperson

human

inventor

Answer:

False.

Explanation:

provided the distance between the forces remains the same, the force will increase with increased charge, whether attractive or repulsive.

Answer:

Explanation:

F = ma

a = F/m = 21/3 = 7 m/s²

Answer:

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Explanation:

Answer:

An electric current flows in a loop,powering bulbs or other electric COMPONENTS. The loop is an electric circuit. A circuit is made up of various components linked together by wires. The current is driven around the circuit by a power source, such as a BATTERY.

Voltage: is the energy given to each unit of charge that flows in a circuit

Current: is the amount of electric charge flowing past a point in a circuit each second

Wattage: is the amount of electrical energy a circuit uses each second

Answer:

i think your answer is this: the objects have no interactive with each other.

Explanation:

if you think about it tissue paper doesn't really have a static electrical charge if it does it is very weak so therefore cannot really attract or repel anything.

Hi there!

a.

We know that:

[tex]\Sigma F_y = 0 \\\\\Sigma F_x = 0[/tex]

Begin by determining the forces in the vertical direction:

W = weight of traffic light

T₁sinθ = vertical component of T₁

T₂sinθ = vertical component of T₂

b.

The ropes provide a horizontal force:

T₁cosθ = Horizontal component of T1

T₂cosθ = Horizontal component of T2

Thus:

0 = T₁cosθ  - T₂cosθ

T₁cosθ = T₂cosθ

T₁ = T₂

c.

Since the angles for both ropes are the same, we can say that:

T₁ = T₂

Sum the forces:

ΣFy = T₁sinθ + T₁sinθ - W = 0

2T₁sinθ = W

d.

Now, we can begin by solving for the tensions:

2T₁sinθ = W

[tex]T_1 = T_2 = \frac{W}{2sin\theta} = \frac{100}{2sin(37)} = \boxed{83.08 N}[/tex]

Explanation:

We know that the tangent velocity is 8.1 m/s. We also know that the tangent velocity can be written in the following way:

Vt = ωr with ω being the angular velocity.

We now calculate ω:

ω = Vt/r = 8.1 m/s / 27m = 0.3 rad/s

Now that we have ω we can calculate the centripetal aceleration:

a = ω^2 * r = ( 0.3 )^2 * 27 = 2.43 m/s^2

Answer:

Explanation:

                            F = ma

mgsinθ - μmgcosθ = ma

      gsinθ - μgcosθ = a

                   μgcosθ = gsinθ - a

                              μ = (gsinθ - a) / gcosθ

                              μ = (9.81sin24 - 0.245) / 9.81cos24

                              μ = 0.4178906...

                              μ = 0.418

The coefficient of kinetic friction will be equal to 0.418.

Friction is the force that prevents solid surfaces, fluid layers, and material elements from sliding against each other. There are various kinds of friction: Dry friction is the force that opposes the relative lateral motion of two in-touch solid surfaces.

Given that a 1.95 kg box sits on an incline of 24 ° with the horizontal. If the box accelerates down the incline at 0.245 m/s 2

The coefficient of kinetic friction will be calculated as,

F = ma

mgsinθ - μmgcosθ = ma

gsinθ - μgcosθ = a

μgcosθ = gsinθ - a

Solve for the value of the coefficient of friction,

μ = (gsinθ - a) / gcosθ

μ = (9.81sin24 - 0.245) / 9.81cos24

μ = 0.4178906...

μ = 0.418

Therefore, the coefficient of kinetic friction will be equal to 0.418.

To know more about the coefficient of friction follow

https://brainly.com/question/29719172

#SPJ2

Answer:

I think A

Explanation:

Which statement about diffraction is correct?

A. Sound waves bend around the corners of various obstacles.

B. Sound waves can only travel in straight lines.

C. The amplitudes of two waves combine to appear as a wave smaller than the individual waves.

D. The amplitudes of two waves combine to appear as one big wave.

Answer:When the length of a string is changed, it will vibrate with a different frequency.Shorter strings have higher frequency and therefore higher pitch.

Explanation:

look !

speed= 38m/s

start from rest= 0

Answer:

Explanation:

V = 100sin(ωt) + 150cos(ωt)

let x = ωt

V = 100sin(x) + 150cos(x)

a maximum or minimum will occur when the derivative is zero

V' = 100cos(x) - 150sin(x)

0 = 100cos(x) - 150sin(x)

100cos(x) = 150sin(x)

100/150 = sin(x)/cos(x)

0.6667 = tan(x)

x = 0.588 rad

V = 100sin(0.588) + 150cos(0.588)

V = 180.27756

as the maximum will not occur until ωt = 0.588 radians, for a cosine function we subtract that amount as a phase angle φ

V = 180.3 cos(ωt - 0.588)

or as a sine function, the phase angle lags the cosine by a difference of π/2

V = 180.3sin(ωt - (0.588 - π/2)

V = 180.3sin(ωt + 0.983)

Mathematics is a broad subject that anyone who constantly practices by learning from first principle and from example will grow in perfection of the subject as time goes by. Hence, I strongly disagree

During my schools days, I struggled learning mathematics, at the time it was difficult, I began practising and learning from text examples, with time I got a hang of it and my grade and confidence level in the subject increased.

Learn more about Mathematics here:

https://brainly.com/question/6143254

Hope you could get an idea from here.

Doubt clarification - use comment section.