The resistance of a filament that carries 2 A when a 10-V potential difference across it is. A) 2 ohms. B) 5 ohms. C) 10 ohms. D) 20 ohms.

Each base is at the intersection of a square-shaped infield in baseball. 8100 square feet, 900 square yards, or 90 × 90 square feet make up the space.

Nine players occupy the diamond-shaped field that is used for baseball. There are two main areas of the field: the infield and the outfield. Four infielders and two core players cover the infield. Three outfielders cover the outfield.

In a letter dated May 26, James Cannon expressed shock that the "diamond" form is referred to as a rhombus. A baseball diamond, he pointed out, is essentially a square.

The elevated dirt area in the middle of the infield known as the hill—also known as the pitcher's mound—is where the pitcher throws. The pitcher's rubber is located directly behind the middle of the mound and is what they use to prepare and throw the ball.

To learn more about field refer to:

https://brainly.com/question/12324569

#SPJ4

When feelings of anxiety and worry become excessive, out of control, and interfere with daily life, they can develop into pathological diseases called anxiety disorders. So the correct option is (c).

Anxiety disorders are characterized by feelings of apprehension and fear, which are normal human emotions. However, when these feelings become excessive, uncontrollable, and affect daily life, they can be considered a pathological disorder. Anxiety disorders can affect a person's ability to perform daily activities, such as work or school, and can also cause physical symptoms such as insomnia, muscle tension, and fatigue. These disorders can be recurrent, but they need to be excessive, uncontrollable, and affect daily life in order to be considered pathological.

To know more about anxiety disorders please refer: https://brainly.com/question/14756327

#SPJ4

The statement is not correct the mass of the jam is 500g and the density of the jam is 0.125gm/cm³

To learn more about density refer to:

https://brainly.com/question/30127073

#SPJ4

The acceleration which is acting on the object which is moving on the ramp is same for both the motion whether is going upwards or moving downwards.

Rolling motion happens when an object roll over from a ramp or any other sloppy surface whether it is rough or smooth. many forces act on it at the same moment. also in many forces rolling tangential force and gravitational force is also acting on it at the same moment. in which the gravitational force is acting on it at a bigger pace and plays an important role in rolling of the object from the ramp or any other sloppy surface. here we can see that the only force that is making impact on the object is the gravitational force. Hence, by this information we consider that the  acceleration which is acting on the object which is moving on the ramp is same for both the motion whether is going upwards or moving downwards.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

Answer:

23.4 kg m/s

Explanation:

p = mv = 0.013kg × 1800m/s = 23.4 Kg.m/s

The current through the bottom of the wire is 0.415 A and the negative sign of the current indicates that current flows from left to right from the bottom wire.

The current through various parts of the circuit is as shown in figure.

Here we have to calculate the current I_5.

Applying Kirchoff's loop rule on each of the loops in the circuit, Consider the left triangle, for it, we have

[tex]$$\begin{aligned}& \left(I_1\right) 6 \Omega+\left(I_3\right) 12 \Omega-9 \mathrm{~V}=0 \\& \Rightarrow 6 I_1+12 I_3=9 \\& \Rightarrow I_1=\frac{9}{6}-\frac{12}{6} I_3 \\& \Rightarrow I_1=1.5-2 I_3-----(1)\end{aligned}$$[/tex]

For the centre of the triangle, we have

[tex]$$\begin{aligned}& \left(I_4\right) 24 \Omega-\left(I_3\right) 12 \Omega=0 \\& \Rightarrow I_4=\frac{12}{24} I_3 \\& \Rightarrow I_4=\frac{I_3}{2}-----(2)\end{aligned}$$[/tex]

And for the right triangle, we have

[tex]$$\begin{aligned}& \left(I_2\right) 10 \Omega+\left(I_4\right) 24 \Omega-15 \mathrm{~V}=0 \\& \Rightarrow I_2=\frac{15}{10}-\frac{24}{10} I_4 \\& \Rightarrow I_2=1.5-2.4 I_4------(3)\end{aligned}$$[/tex]

The junction rule applied at the left corner gives

I_1  =I_3+I_5

=I_5  =I_1-I_3

=1.5-2 I_3-(I_3)=1.5-3 I_3--------(4)

And applying the junction rule at the right corner,

I_4 =I_2+I_5

I_5 =I_4-I_2

=I_4-(1.5-2.4 I_4)=3.4 I_4-1.5-------(5)

Using equation (2) [tex]$I_4=\frac{I_3}{2}$[/tex], equation (5) can be written as

[tex]$$\begin{aligned}I_5 & =3.4\left(\frac{I_3}{2}\right)-1.5 \\\end{aligned}$$[/tex]==1.7 I_3-1.5

Solving equations (4) and (6), we have

1.5-3 I_3=1.7 I_3-1.5

(1.5+1.5)=(1.7+3.0) I_3

3.0=4.7 I_3

[tex]\Rightarrow I_3=\frac{3.0}{4.7} \mathrm{~A}[/tex]

Hence the current in the bottom wire is given by

[tex]I_5 & =1.7\left(\frac{3.0}{4.7}\right)-1.5 \\[/tex] =1.085-1.5 =-0.415 A

For more questions on Kirchoff's loop rule

https://brainly.com/question/30201571

#SPJ4

The final velocity of the red-blue carts system is 5 cm/s.

The final speed of the two carts, that is the red cart and the blue cart system after the collision is calculated by applying the principle of conservation of linear momentum.

Pi = Pf

m₁u₁ + m₂u₂ = v ( m₁ + m₂ )

where;

m₁u₁ + 0 = v ( m₁ + m₂ )

m₁u₁ = v ( m₁ + m₂ )

v = ( m₁u₁ ) / ( m₁ + m₂ )

The final velocity of the red-blue carts system is calculated as;

v = ( 50 kg cm/s ) / ( 5 kg + 5kg )

v = 5 cm/s

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

The complete question is below:

A red cart is moving rightward with a momentum of 50 kg cm/s when it collides with a blue cart of equal mass that is initially at rest. The two carts stick together and move to the right with the same speed after the collision. What is the final velocity of the two carts system after the collision if the mass of the blue cart is 5 kg.

If the lever is frictionless, to raise the rock a distance of 0.13 m, then the boy has to move the lever to 0.72 m.

An external force that acts upon an object results in a motion of the object, then it is called a work done upon the object by that force.

Given that the external force on a lever is 225 N and on a rock is 1250 N. The distance of motion by the rock is 0.13 m.

Hence the work done by the lever will be equivalent to the work done by the rock to move a particular distance.

Work (Lever) = Work (Rock)

F(lever) x D (lever) = F (rock) x D (rock)

225x D(lever)= 1250 x0.13

D(lever) is 0.72 m

Hence we can conclude that the distance of the motion by the lever is 0.72 m.

To know more about the work:

brainly.com/question/3902440.

#SPJ4

Answer: -39200.45 Nm^2/C^2       This is rough work

Explanation:

So, the net force will be felt on particle [tex]\sf{q_1}[/tex] approximately 15.39 N to the right.

Hi! Here I will explain the net force of three charges that interacts. Remember that this question can be solved using Coulomb's Law. Coulomb's Law states that the interaction force between two interacted charges will be proportional to the magnitude of the charges that have specific interaction but inversely proportional to the square of the value of the distance between each other. So, with this concept, we can calculate the magnitude of coulomb force with this equation:

[tex] \boxed{\sf{\bold{F = k \cdot \frac{q_1 \cdot q_2}{(r_{12})^2}}}} [/tex]

On this condition, the net force will be felt only by the first charge, so we must define the position of the first charge as a fixed one. So, we can calculate the magnitude of coulomb force concerning the first charge with this equation:

[tex] \boxed{\sf{\bold{\sum F_{q1} = k \cdot (\frac{q_1 \cdot q_2}{(r_{12})^2} + \frac{q_1 \cdot q_3}{(r_{13})^2})}}} [/tex]

With the following condition:

[See the attached image to know how to solve this problem]

So, the net force will be felt on particle [tex]\sf{q_1}[/tex] approximately 15.39 N to the right.

The time taken is 3.33 ns for light to travel 1.0 cm in a spectrophotometer.

What is time?

Time is defined as a scalar quantity that describes the progression of events in the universe. It is often considered to be the fourth dimension of spacetime, along with the three dimensions of space. Time is closely related to the concepts of causality, or the relationship between cause and effect, and is considered to be a fundamental aspect of the physical universe.

The distance light travels in 1 cm is equal to 1 cm x 10^-2 m. To find out how long it takes for light to travel this distance, we can use the formula:

time = distance / speed

Where distance is the distance light travels (1.0 cm x 10^-2 m), and speed is the speed of light in vacuum (3.0 x 108 m/s).

time = (1.0 cm x 10^-2 m) / (3.0 x 108 m/s)

time = 3.33 x 10^-10 s

To convert this time to nanoseconds (ns), we can multiply the time in seconds by 1 billion (10^9):

time = 3.33 x 10^-10 s x 10^9 ns/s

time = 3.33 ns

Therefore, the time taken is approximately 3.33 ns for light to travel 1.0 cm in a spectrophotometer.

To learn more about time from the given link:

https://brainly.com/question/26046491

#SPJ4

Answer:

6.9 m/s

Explanation:

This is a conservation of momentum problem, so the total momentum before the collision must equal the total momentum after the collision.

P = mv

m1v1 + m2v2 (before) = m1v1 + m2v2 (after)

(3250kg)(25.0 m/s) + (2820 kg)(0m/s) = (3250 kg)(19.0 m/s) + (2820 kg)(v2)

Now you can solve for the v of the car after the collision:

81250 kg·m/s + 0 = 61750 kg·m/s + (2820 kg)v2

19500 kg·m/s = (2820 kg)v2

v2 = 19500 kg·m/s / 2820 kg = 6.9 m/s

The coefficient of viscosity of a liquid can be determined from the motion of a bubble rising or falling through the liquid.

What is viscosity?

Viscosity basically is the measure of a fluid's resistance to flow. It is a measure of a fluid's internal friction, which is caused by the attraction of molecules in the fluid. Viscosity is an important physical property of fluids, as it affects the fluid's flow characteristics.

The equation for the coefficient of viscosity is given by:

2/9 r2 ρg/v.

where,

r = radius of bubble

ρ = density of liquid

g = acceleration due to gravity

v = velocity of bubble

Therefore, to calculate the coefficient of viscosity of a liquid, we need to know the radius of the bubble, the density of the liquid, the acceleration due to gravity, and the velocity of the bubble.

Hence, the coefficient of viscosity of liquid is 2/9 r2 ρg/v.

To know more about viscosity,

https://brainly.com/question/2568610

#SPJ4

The complex impedance of the 100 mH inductance when a voltage vL(t) = 10cos(2000πt) is applied to it is: j200Ω.

What is inductance?

Inductance is a property of an electrical component that describes the ability of the component to store energy in a magnetic field when electric current passes through it.

Inductance is measured in units of henrys (H). When current flows through a component with inductance, it creates a magnetic field around the component that resists changes to the current. This resistance to changes in current is called inductive reactance and is measured in units of ohms.

The complex impedance of an inductor is given by Z = jωL, where ω is the angular frequency and L is the inductance.
Therefore, the complex impedance of the 100 mH inductance when a voltage vL(t) = 10cos(2000πt) is applied to it is:
Z = j(2000π) (100 x 10-3) = j(2π) (100 x 10-3) = j200Ω

To learn about more inductance

https://brainly.com/question/7138348

#SPJ4

Since I0 is the lowest sound intensity that a person with normal hearing can detect, it is chosen as the reference point. Given that log10 1 = 0, the decibel level of a sound with an intensity of 10–12 W/m2 is = 0 dB. In other words, the human hearing threshold is zero decibels.

The reference value I0 is 10–12 W/m2, which corresponds to the threshold of hearing intensity at 1000 Hz. The Sound Intensity Level, or SIL for short, is the intensity decibel scale. The related sign, like in our text, is LI.

Much more frequently than sound intensities in watts per square meter, sound intensity levels are expressed in decibels (dB). Both the scientific literature and the public media use decibels as their preferred measurement unit. The rationale behind this decision of units has to do with how we hear. There is a reference intensity, I0 = 1012 W/m2. The lowest or threshold intensity of sound that a person with normal hearing can perceive at a frequency of 1000 Hz is specifically known as I0. The degree of sound intensity is not the same as the intensity. is a unitless quantity that informs you of the sound level in relation to a predefined standard (1012 W/m2, in this case), as it is defined in terms of a ratio.

To learn more about intensity for sound level from given link

https://brainly.com/question/14468501

#SPJ4

When two unequal masses are dropped simultaneously from the same height, then both masses will experience the same change in D: velocity.

Velocity is the prime indicator of the position and the rapidity of the object. It can be described as the distance covered by an object in a unit of time. It means that velocity is the displacement of the object in unit time. When in the case where two objects with unequal masses are dropped simultaneously from the same height, both masses will attain the same change in velocity.

You can learn more about Velocity at

https://brainly.com/question/25749514

#SPJ4

The gravitational force on the car is 23000 N, the vertical normal (support/reaction) force acting on the car is 0 N, and the horizontal force on the car's tyres from the road is 5460 N.

Mass of the car, m = 2300 kg

Force acting on the car, F = 5000 N

The initial speed of the car, u = 10 m/s

The final speed of the car, v = 14 m/s

Time, t = 20 s

The gravitational force on the car is calculated by the formula given as

F = mg

F = 2300 × 10

F = 23000 N

Now, as there is no vertical movement in the car therefore the vertical force acting on the car is 0 N.

The horizontal force on the car's tyres from the road

= force acting on the car + net force on the car

= 5000 + ma

= 5000 + 2300 × (v-u)/t

= 5000 + 2300 × (14 - 10)/20

= 5000 + 2300 × 4/20

= 5000 + 460

= 5460 N

To know more about gravitational force, here

https://brainly.com/question/24783651

#SPJ4

Answer:

To derive the formula for the pressure at a distance r from the rotation axis, you can use the principle of hydrostatic equilibrium. This states that the pressure at a point in a fluid is equal in all directions and the net force on a fluid element is equal to zero.

Consider a small cylindrical element of fluid at a distance r from the rotation axis, as shown in the diagram below. The dimensions of the element are dr in the radial direction, 2πr in the circumferential direction, and h in the vertical direction. The weight of the element is equal to the product of its volume, density, and the acceleration due to gravity: W = (2πr)(dr)(h)(ρ)(g). The pressure at the top and bottom faces of the element is P + dP, where P is the pressure at the point and dP is a small change in pressure. The forces acting on the element are the weight of the element, the pressure force at the top face, and the pressure force at the bottom face.

[asy]

unitsize(2cm);

pair P1, P2, P3, P4;

P1 = (0,0);

P2 = (1,0);

P3 = (1,1);

P4 = (0,1);

draw((-0.5,0)--(1.5,0));

draw((0,-0.5)--(0,1.5));

draw(P1--P2--P3--P4--cycle);

draw((0.5,0)--(0.5,1));

draw((0.25,0)--(0.25,1));

draw((0.75,0)--(0.75,1));

label("$r$", (0.5,1.5), red);

label("$

Caffeine dosage and time to finish a maze are independent variables, meaning that a change in one does not cause a change in the other. It is possible that caffeine dosage may have an effect on the time it takes to finish a maze, but the time it takes to finish a maze would not cause a change in caffeine dosage.

Caffeine is a stimulant that can affect the central nervous system and can have a range of effects on the body, including increased alertness, focus, and energy. When it comes to completing a maze, the time it takes to finish it could be affected by the person's level of alertness, focus, and energy. Therefore, if a person ingests a certain dosage of caffeine, it could affect the time it takes for them to finish the maze because of the effect caffeine has on the body.

On the other hand, the time it takes to finish a maze does not affect the caffeine dosage, in other words, caffeine dosage is an independent variable, it does not depend on other variables, and does not change based on the time it takes to complete a maze. It is determined by the amount of caffeine consumed.

So, in short, caffeine dosage can have an effect on the time it takes to finish a maze, but the time it takes to finish a maze does not have an effect on caffeine dosage.

Learn more about Caffeine Dosage here:

https://brainly.com/question/8554538

#SPJ4

Static stretching and passive stretching are very similar in that they both involve moving the limbs into and holding the stretch posture.

Static stretching involves the individual holding their own limbs in place, while passive stretching involves a partner assisting with the movement and holding of limbs. When you stretch to your limit and hold that position, you are engaging in a form of stretching known as static stretching. Passive stretching, on the other hand, is also a form of static stretching; however, during this technique, you remain relaxed and do not actively participate in increasing your range of motion.

To learn more about static stretching and passive stretching, click here:

https://brainly.com/question/29552211

#SPJ4

The mass of water displaced when the mass of bird bone in water and air is given, is calculated to be 43.4 g.

Given that,

Weight of bird bone in air = True weight = 47 g

Apparent weight of the bird bone when submerged = 3.6 g

The equation for apparent weight is known to be,

Apparent weight = True weight - Buoyant force

Making Buoyant force as subject, we have,

Buoyant force = 47 g - 3.6 g = 43.4 g

F b = mw × g = (m wat - m air)× g

mw = m wat - m air = 47 g - 3.6 g = 43.4 g

Thus, the mass of the water displaced is 43.4 g.

To know more about mass:

https://brainly.com/question/13073054

#SPJ4

it takes about 26 seconds for speed of light with approximate speed of 3\times10^5  kilometers per second to reach Jupiter.

To calculate the time it takes light to reach Jupiter, we need to know the distance between the Sun and Jupiter. The average distance between the Sun and Jupiter is approximately 778 million kilometers. We can use the formula distance = speed x time to calculate the time it takes for sunlight to reach Jupiter. We know that the speed of light is approximately 3x10^5 kilometers per second and the distance between the Sun and Jupiter is 778 million kilometers.time = distance / speed

time = (77810^6 km) / (310^5 km/s)

time = 26 sec (approximately)

Therefore, it takes about 26 seconds for light to reach Jupiter.

learn more about speed of light here:

https://brainly.com/question/28224010

#SPJ4

The correct option is A, B, and C. A block resting on a slope is Weight, static friction, and Normal force.

Static friction is a force that continues an item at relaxation. Static friction definition can be written as: The friction skilled while individuals try to move a desk-bound object on a surface, without surely triggering any relative movement between the frame and the surface on which it's miles.

Static friction is a form of friction force that acts on a body when there's no relative motion between the object and the surface. So, it can act even if the frame is in motion however there should be no relative motion.

A pressure acting on an item is said to be a static force if it no longer exchanges the scale, function, or route of that precise object. The pressure implemented to a structure acts as a load to that precise structure, that is why static force is likewise called a static load.

To learn more about Static friction visit here:

brainly.com/question/13000653

#SPJ4

Complete Question:

A block is resting on a slope. (Figure 3) Which of the following forces act on the block?

Check all that apply.

A). Weight

B). Static friction

C). Normal force

D). Kinetic friction

E). Force of push

Mechanical energy is used to start the Ferris wheel, providing the initial rotation and motion to the wheel.

The motion of the wheel then causes the lights along the seats to be powered, allowing them to light up as the wheel turns. The wheel is then able to generate kinetic energy as it moves, which it then uses to continue turning.

As the wheel turns, it transfers its energy from mechanical to kinetic, and this energy is used to keep the wheel moving from start to finish. Kinetic energy is also used to power the centrifugal force which keeps the riders in their seats as the wheel turns, allowing them to enjoy the ride.

Learn more about energy:

https://brainly.com/question/25959744

#SPJ4

The velocity of the object is 7.74m/s

Though it may sound sophisticated, velocity is simply the rate at which an object's location changes with regard to a frame of reference and time. Since it is a vector quantity, the definition of velocity requires both magnitude (speed) and direction.

We are given that,

Acceleration = 12m/s²

Radius = r = 5.0m

Velocity = v = ?

The velocity of the object can be calculated by the formula ,

a = v²/r

v = √ar

v = √12m/s²× 5m

v = √60m²/s²

v= 7.74m/s

Thus , the velocity of the object would be 7.74m/s.

To know more about velocity

https://brainly.com/question/29886789

#SPJ4

The seatback must be adjusted far enough for your wrist to rest on the top of the steering wheel when your arm is comfortably extended.

The majority of modern automobiles, compact trucks, and SUVs have a rack and pinion steering. This transforms the steering wheel's rotational action into the linear motion which rotates the wheels and directs your course. A steering pinion, a circular gear, is used in the system to lock teeth on a rod (the rack).

The basic device at work in steering, doorknobs, turbines, and bicycle wheels is a wheel and axle. An inclined plane wound around a cylinder is known as a screw.

To know more about Steering wheel visit:

https://brainly.com/question/12543668

#SPJ4

Answer:

Work done is 2280 Joules.

Explanation:

Work done can be found using the formula

[tex]W=Fs\\[/tex]

where:
W is work done ( in Joules)
F is force ( in Newtons)
s is displacement ( in Meters)

Assuming we are on Earth, we can find the force acting on the object using the mass with the following:

Mass × 10 = Force

12.0 × 10 = 120N

Moreover, we can find displacement by simply subtracting the final distance from the starting distance:

22.0m - 3.00m = 19.0m

Therefore,

 [tex]W = Fs[/tex]

[tex]W = 120N[/tex] × [tex]19m[/tex]

[tex]W= 2280J[/tex]

Dynamic flexibility tests are not used as often as static flexibility tests because dynamic flexibility tests involve more subjective measurements.

Static flexibility tests are more common in comparison to dynamic tests because static flexibility tests are easier to replicate. It is difficult to standardize motion-based tests such as dynamic flexibility tests between various subjects, while static flexibility tests are simple and easy to standardize it is because the metrics are fixed and not open to interpretation.

Since, dynamic flexibility tests are hard to perform because they measure the amount of stress on a muscle that is in motion. And it is difficult to assess this among multiple people and to get an accurate picture. That is why these tests are not used as often as static flexibility tests.

"

Complete question

Why are dynamic flexibility tests not used as often as static flexibility tests?

"

You can learn more about dynamic flexibility tests at

https://brainly.com/question/15720248

#SPJ4

Answer:

27s

Explanation:

Time = distance/speed

Time = 219/8

Time = 27.375 s

The absolute pressure in a car tire can found by following method:

Pressure is the force per unit area applied toward a course perpendicular to the outer layer of an item. To keep it precise, it is an amount of force following up on a unit area. The SI unit for pressure is measured in Pascals (Pa). Other non-SI units are bar and PSI. There are two types of references to quantify pressure,

                                 Gauge Pressure

                                 Absolute Pressure

Formula of Absolute pressure is given by:

                                       p(a) = p(g) + p(atm)

Where ,

p(a) is absolute pressure,

p(g) is gauge pressure and

P(atm) is atmospheric pressure

To know more about pressure visit:

https://brainly.com/question/11150083

#SPJ1