The shapes of the drops relate to the attractive forces between molecules in a compound. Based on their shapes, how does the attractive force between the water molecules compare with the attractive force between the oil molecules?

Answer:

2Na and 2HCl

Explanation:

The equation for the above chemical reaction is as follows:

2Na + 2HCI → 2NaCl + H2

In a reaction, the reactants are said to be those that combine together to form products. In this case, sodium (Na) and hydrochloric acid (HCl) are the reactants of this reaction

Answer:

I think it is 7.60 X 1

but if it's not srry

Answer:

Ovary

Explanation:

ovaries produce the most estrogen in females.

Answer: 30.978

Explanation:

From the equation 2 moles of Fe will result in 3 moles copper

so .325 moles Fe will result in .4875 moles Cu

Cu weights 63.546 gm per mole

.4875 moles * 63.546 gm / mole = 30.978 gm of Cu

Answer:

1.21 g of Tris

Explanation:

Our solution if made of a solute named Tris

Molecular weight of Tris is 121 g/mol

[Tris] = 100 mM

This is the concentration of solution:

(100 mmoles of Tris in 1 mL of solution) . 1000

Notice that mM = M . 1000  We convert from mM to M

100 mM . 1 M / 1000 mM = 0.1 M

M = molarity (moles of solute in 1 L of solution, or mmoles of solute in 1 mL of solution). Let's determine the mmoles of Tris

0.1 M = mmoles of Tris / 100 mL

mmoles of Tris = 100 mL . 0.1 M → 10 mmoles

We convert mmoles to moles → 10 mmol . 1mol / 1000mmoles = 0.010 mol

And now we determine the mass of solute, by molecular weight

0.010 mol . 121 g /mol = 1.21 g

Answer:

1.932 kg

Explanation:

First we convert 100.0 mL to L:

Then we calculate the mass of the substance, using the definition of density:

As the multiplication involves two numbers of 4 significant figures each, the answer needs to have 4 significants figures as well.

Answer:

I)Acetylene

II)2-Methyl-1-butanol

Explanation:

I)appears as a colorless gas with a faint garlic-like odor. Easily ignited and burns with a sooty flame. Gas is lighter than air.

Answer: The Answer would be C

Explanation: A spectrum is a Range of Wavelengths and Frequencies of Electromagnetic Radition.

The statement that describe spectrum is a range of wavelengths or frequencies of electromagnetic radiation.

Spectrum arrangement or electromagnetic radiations base on their wavelength and frequency which can be visible light, ultraviolet, and infrared light. An instrument that is use for visual observation of spectra is called a spectroscope.

Therefore, The statement that describe spectrum is a range of wavelengths or frequencies of electromagnetic

radiation.

Learn more about spectrum from the link below.

https://brainly.com/question/4901067

Answer:

I think its -8.75

Explanation:

Hope this helps!11

Answer:

44.8g

Explanation:

molar mass of k= 39, O= 16, H= 1

molecular mass of KOH= 56g/mol

N=m/Mm

0.8=m/56

m= 0.8×56

m= 44.8g

Mass is "a measure of the amount of matter that an object contains".

Matter is "any substance that has mass and takes up space by having volume".

The formula to calculate the molar mass is M = m/n

where M is molar mass

           m is mass of substance in grams

           n is no. of moles of a substance.

The molecular mass of KOH is 56.105 g/mol

molar mass of K= 39, O= 16, H= 1

M = m/n

 0.8 = m/56.105

    m = 0.8 x 56.105

     m  = 44.8g

Hence, the mass of 0.8 mol of KOH is 44.8g

To learn more about Mass here

https://brainly.com/question/23851105

#SPJ2

Answer:

Explanation:

It orbits

Solution :

The partition coefficient

[tex]$k_d= \frac{\text{(mass of caffeine in }CH_2Cl_2 / \text{volume of }CH_2Cl_2)}{\text{(mass of caffeine in water/ volume of water)}}$[/tex]

   = 9.0

A). 1 x 200 mL extraction

Let m be the mass of caffeine in water

Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = 100 - m

∴ [tex]$\frac{(100-m)/200}{m/200}=9$[/tex]

  [tex]$\frac{100-m}{m}=9$[/tex]

  [tex]$10 \ m = 100$[/tex]

[tex]$m=\frac{100}{10}$[/tex]

     = 10

Therefore, the mass remaining in the coffee is m = 10 mg

B). 2 x 100 mL extraction

First extraction :

Let [tex]$m_1$[/tex] be the mass of the caffeine in water.

Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = 100 - m

∴ [tex]$\frac{(100-m_1)/100}{m_1/200}=9$[/tex]

  [tex]$\frac{100-m_1}{m_1}=9$[/tex]

  [tex]$5.5 \ m_1 = 100$[/tex]

[tex]$m_1=\frac{100}{5.5}$[/tex]

     = 18.18

Mass remaining in the coffee after the 1st extraction [tex]$m_1$[/tex] = 18.18 mg

Second extraction:

Let [tex]$m_2$[/tex] be the mass of the caffeine in water.

Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = 18.18 - [tex]$m_2$[/tex]

∴ [tex]$\frac{(18.18-m_2)/100}{m_2/200}=9$[/tex]

  [tex]$\frac{18.18-m_2}{m_2}=9$[/tex]

  [tex]$5.5 \ m_2 = 18.18$[/tex]

[tex]$m_1=\frac{18.18}{5.5}$[/tex]

     = 3.3

Mass remaining in the coffee after the 1st extraction [tex]$m_2$[/tex] = 3.3 mg

Answer:

Production of liquid oxygen from air Oxygen is generated by liquefaction of atmospheric air in the air separation unit (ASU). Cryogenic technique is the most commonly used for producing liquid oxygen for industrial and medical applications .

Explanation:

An air separation unit (ASU) uses continuous cryogenic distillation to continuously liquefy ambient air and separate the oxygen gas.

Oxygen is the second largest abundant element in the atmosphere comprising 20.8% by volume. Despite being mostly used as a gas, oxygen is frequently stored as a liquid. Compared to high-pressure gaseous storage with a similar capacity, liquid storage is less expensive and bulkier.

A cryogenic storage tank, one or more vaporizers, and a pressure control system make up a typical storage system. The cryogenic tank is built similarly to a vacuum bottle.

The primary air compressor is where the ASU manufacturing process starts, and the product storage tanks' output is where it concludes. Moisture, carbon dioxide, and hydrocarbons are taken out of the air after it has been compressed and put through a purification system.

To find more on oxygen manufacturing, refer here:

https://brainly.com/question/1064242

#SPJ6

Answer:

FADH2 is a reducing agent.

FAD is an oxidizing agent.

Explanation:

The full form of FAD is flavin adenine dinucleotide. It is mainly a redox-active coenzyme which is associated with the different proteins and is involved with the enzymatic reactions in the metabolism.

FAD is obtained by donating or accepting electrons.

In the citric acid cycle,

succinate + FAD → fumarate + [tex]$FADH_2$[/tex]

Thus we see that FAD is an oxidizing agent while [tex]$FADH_2$[/tex] is a reducing agent.      

Petroleum  is a nonrenewable energy source. Therefore, the correct option is option B.

The sources of non-renewable energy will deplete or not be renewed within our lifetimes, or perhaps within many, many lifetimes. Coal, oil, and natural gas are the main fossil fuels used as non-renewable energy sources. The primary component of fossil fuels is carbon.

The formation of fossil fuels, which took place between 360 and 300 million years ago, is referred to as the Carboniferous Era for this reason. The formation of all fossil fuels was identical. Prior to the dinosaurs, Earth used to have a different terrain thousands of thousands of years ago. It was entirely covered in swampy forests and broad, shallow oceans. Petroleum  is a nonrenewable energy source.

Therefore, the correct option is option B.

To know more about nonrenewable energy source, here:

https://brainly.com/question/30378300

#SPJ7

Answer:

Mole = number of molecules divided by the avogadro's constant.

Molar mass of NaCI =23 + 35.5 =58.5g/mol

Mass= moles multipled by molar mass of NaCI

M

Answer:

D. Cyclic alkane

Explanation: there is no double or triple bond

The type of molecule that is shown below in the picture is a cyclic alkane. The correct option is D.

This is the compound that contain hydrogen and carbon bond. They are mono cyclic saturated hydrocarbons.

These are the atoms that replace the hydrogen atom in an organic compound.

Thus, the correct option is D. Cyclic alkane.

Learn more about cyclic alkane

https://brainly.com/question/23802223

#SPJ2

Answer:

The answer is 10cm^3

Explanation:

5x1x2=10

Mind marking me brainliest? :)

Answer:

9.07 L

Explanation:

Calculate the volume occupied at s.t.p by 6.89 g of NH₃ gas [H = 1.0, N = 14.0​].

Step 1: Given and required data

Step 2: Calculate the moles (n) of NH₃

We will use the following epxression.

n = m / M

n = 6.89 g / (17.0 g/mol) = 0.405 mol

Step 3: Calculate the volume occupied by 0.405 moles of NH₃ at STP

At STP, 1 mole of NH₃ occupies 22.4 L (assuming ideal behavior).

0.405 mol × 22.4 L/1 mol = 9.07 L

Answer:

Explanation:

Given the data in the question;

wavelength λ₁ = 853 nm = 853 × 10⁻⁹ m

wavelength λ₂ = 865 nm = 865 × 10⁻⁹ m

we determine the energy of each photons using the following expression;

[tex]E_{photon[/tex] = hc / λ

where h is Planck's constant ( 6.626 × 10⁻³⁴ J.s )

c is speed of light ( 3 × 10⁸ m/s )

For Photon with wavelength λ₁ = 853 × 10⁻⁹ m

[tex]E_{photon1[/tex] = hc / λ

we substitute

= ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / (853 × 10⁻⁹ m)

= 1.9878 × 10⁻²⁵ / 853 × 10⁻⁹

= 2.33 × 10⁻¹⁹ J

For Photon with wavelength  λ₂ = 865 × 10⁻⁹ m

[tex]E_{photon2[/tex] = ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / (865 × 10⁻⁹ m)

= 1.9878 × 10⁻²⁵ / 865 × 10⁻⁹

= 2.298 × 10⁻¹⁹ J

We know that; energy of the combined photon will be equal to the sum of energies of the two photons.

so

Energy of the combined photon = [tex]E_{photon1[/tex] + [tex]E_{photon2[/tex]

[tex]E_{combined[/tex] = 2.33 × 10⁻¹⁹ J + 2.298 × 10⁻¹⁹ J

[tex]E_{combined[/tex]  = 4.628 × 10⁻¹⁹ J

so wavelength of the new combined photon will be;

[tex]E_{combined[/tex] = hc / λ[tex]_{combined[/tex]

[tex]E_{combined[/tex]λ[tex]_{combined[/tex] = hc

λ[tex]_{combined[/tex] = hc / [tex]E_{combined[/tex]

we substitute

λ[tex]_{combined[/tex] = ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / 4.628 × 10⁻¹⁹ J

= 1.9878 × 10⁻²⁵ / 4.628 × 10⁻¹⁹

= 4.2952 × 10⁻⁷ m

= ( 4.2952 × 10⁻⁷ × 10⁹ )nm

= 429.5 nm

Therefore, Wavelength of the new 'combined' photon is 429.5 nm

Answer:

organic acid

Explanation:

Answer:

Hey mate.....

Explanation:

This is ur answer.....

Alkyl carboxylic acid

Valeric acid (pentanoic acid) is a straight-chain alkyl carboxylic acid with a very unpleasant odor. It is found naturally in the perennial flowering plant valerian (Valeriana officinalis), from which it gets its name.

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

Explanation:

element is aluminium

shells              K            L              M             N

electrons        2             8             3

The balanced reaction is

(Na3PO4)12H2O + 9(BaCl2)2H2O → 6Ba3(PO4)2 + 36NaCl + 10H2O

molar mass of (Na3PO4)12H2O = 380 g/mol

given mass of (Na3PO4)12H2O = 0.990 g

moles of (Na3PO4)12H2O = given mass/molar mass

moles of (Na3PO4)12H2O = 0.990/380= 0.0026 mole

one mole of (Na3PO4)12H2O forms 6 mole of Ba3(PO4)2

0.0026 mole of (Na3PO4)12H2O forms 0.0026×6 =

0.0156 mole of Ba3(PO4)2

mass of 0.0156 moles of Ba3(PO4)2 is = 0.0156 × 601.9 g = 9.40 gram

Answer:

6.59 g/cm³

Explanation:

Step 1: Given data

Step 2: Calculate the volume of the cube

We will use the following expression.

V = s³ = (2.54 cm)³ = 16.4 cm³

Step 3: Calculate the density of the solid

Density is an intrinsic property, equal to the quotient between the mass and the volume.

ρ = m/V

ρ = 108 g / 16.4 cm³ = 6.59 g/cm³

Answer:

Explanation:

Percolation is a natural process in which surface water is gradually filtered through the soil into aquifers. When groundwater is depleted, recycled water can be introduced into aquifers by letting it gradually filter through the soil When you hear the word “percolation,” making coffee probably comes to mind.

Answer:

It can be said that a reasonable concentration of HAt in water would be 0

Explanation:Hydrogen astatide is a chemical compound with the chemical formula HAt, consisting of an astatine atom covalently bonded to a hydrogen atom.

This chemical compound can dissolve in water to form hydroastatic acid, which exhibits properties very similar to the other four binary acids, and is in fact the strongest among them. So we can safely say that a reasonable concentration of HAt in water would be 0. However, it is limited in use due to its ready decomposition into elemental hydrogen and astatine.