The stone thrown with an initial velocity of 20. meters per second straight upward from the edge of a cliff 100. meters above a canyon floor. The stone just misses the cliff's edge on its way down (Neglect friction). Calculate the position of the stone 6.0 seconds after it was thrown.

Answers

Answer 1

The stone's greatest height over the cliff is 2.04s and it takes it and the stone respectively seconds to get there 20.4s

What is the explanation?

Given:

The stone's starting velocity is 20m

The cliff rises to a height of.100. meters

Concept:

The stone will move when it is hurled upward from the top of the cliff owing to the acceleration caused by gravity. Because the acceleration on the stone is operating in the direction opposite to its motion, the speed of the stone will decrease as it climbs upward.

When the stone reaches its highest point and briefly comes to rest, its speed will be zero.

the length of time it took the stone to stand at its tallest

The time it took the stone to reach its highest point is provided by:

0 = 20-(9.8)t

t = 20/9.81  s

= 2.04 s

Here, the stone's time, beginning velocity, ultimate velocity, acceleration, and time are all shown.

[tex]v^{2} f = vi^{2} -2gs[/tex]

Replace the values in the equation above.

The distance the stone traveled to attain its greatest height is calculated as follows:

[tex](0)^{2} = (20)^{2} - 2(9.81)s\\s = \frac{400}{19.62} m\\20.4 m[/tex]

The stone's travel distance is shown here.

Replace the values in the equation above.

As a result, the greatest height that the stone can reach over the cliff is 2.04 m and the time it takes to get there are both equal to 20.4 m

To learn more about starting velocity refer to:

https://brainly.com/question/343100

#SPJ1


Related Questions

which of the following free-body diagrams could be used to analyze the forces exerted on the moon when it is at the position indicated in the figure?

Answers

Option F, with the GRAVITY arrow pointing to the right, is the appropriate diagram. By means of gravity, a planet and other body pulls items toward its core.

Describe the moon's orbit around a planet.

Moons are subject to the gravitational pull of planets. So because near side of the moon is subjected to a stronger pull compared to the far side, it is drawn into a slightly expanded shape. The moon seems to have a comparable differential pull to the Earth that causes ocean tides.

The Moon's and Earth's gravitational pull caused this particular case of tidal locking (called synchronous rotation).

One orbit of Sun is completed by the Earth in 365 and one-quarter days, or one year. The Earth rotates around the Moon just like the Moon does around the Sun. The Moon's orbit will last 27 1/2 days.

To know more about gravity visit:

https://brainly.com/question/4014727

#SPJ4

5. Which of the following is true about the Wechsler tests?
O
The Wechsler tests use a number of subtests to measure both verbal and nonverbal intelligence.
The Wechsler tests use a number of subtests to measure emotional intelligence.
The Wechsler tests use a number of subtests to measure eight different types of intelligence.
The Weschler tests can prove a test taker is a savant.

Answers

Answer:

One true statement about the Wechsler tests is that they use a number of subtests to measure both verbal and nonverbal intelligence. The Wechsler Adult Intelligence Scale (WAIS) and the Wechsler Intelligence Scale for Children (WISC) are among the most commonly used intelligence tests in the world. These tests are designed to assess an individual's cognitive abilities, including their ability to think abstractly, solve problems, and understand and use language. The tests use a variety of subtests to measure different aspects of intelligence, including verbal comprehension, perceptual reasoning, working memory, and processing speed. These subtests are combined to produce a full-scale IQ score, which provides an overall measure of an individual's cognitive ability.

The answer to my English subject

Answers

D? Im not too sure but probably since it attracts a group of people

In Chapter 9 we will define the center of mass of an object and prove that its motion is described by the particle under constant acceleration model when constant forces act on the object. A gymnast jumps straight up, with her center of mass moving at 2.80 m/s as she leaves the ground. How high above this point is her center of mass (a) 0.100 s , (b) 0.200 s (c) 0.300 s, and (d) 0.500 s thereafter?

Answers

A position established in relation to an object or set of objects is the center of mass. It represents the system's average location as weighted by each component's mass.

The center of mass for straightforward stiff objects with homogeneous density is found at the centroid. The location where the distribution of mass is constant in all directions called the center of mass.

speed of the gymnast = 2.80 m/s

using the second equation of motion,

s = u t + 1/2 a t ^2

the position at time, t = 0.100 sec

s = (2.80) (0.100) + 1/2 (-9.8 m/s^2) (0.100)^2

s = 0.231 m.

the position at time, t = 0.200 sec

s = 0.364 m.

the position at time, t = 0.300 sec

s = 0.399 m.

the position at time, t = 0.500 sec

s = 0.175 m.

to know more about center of mass please visit.

https://brainly.com/question/28996108

#SPJ4

for d, you will want to mention a specific term/concept that you're describing for why mrp is downward sloping.

Answers

Inside this services and products (G&S) financial instrument, the DD curve depicts the link between variations through one exogenous construct and one regressor.

What is a MRP?

The marginal revenue generated by using one more unit of a product is known as the marginal product of labor (MRP). MRP is used to calculate the ideal resource level while also making crucial decisions about the company's output. The MRP makes the assumption that expenses for other components won't change.

With increased production, a commodity's marginal usefulness decreases. As a result, when there is a greater supply, prices would decrease and demand will rise. Therefore, when the price is lower, consumers would desire fewer things. The aggregate supply slopes downward for this reason.

Learn more about MRP, Here:

https://brainly.com/question/29755253

#SPJ4

A 3.20 kg fish is attached to the lower end of a vertical spring that has negligible mass and force constant 850 N/m . The spring initially is neither stretched nor compressed. The fish is released from rest.What is its speed after it has descended 0.0490 m from its initial position?

Answers

The speed of the spring from its initial position is 0.8 m/s.

What is the speed of the spring?

The speed of the spring after it descended from the given position is calculated by applying the principle of conservation of energy.

K.E = U

¹/₂mv² = ¹/₂kx²

mv² = kx²

v² = kx² / m

v = √ ( kx² / m )

where;

k is the spring constantx is the extension of the springm is the mass of the fish

The speed of the spring after descending the given distance is calculated as;

v = √ ( 850 x 0.049² / 3.2 )

v = 0.8 m/s

Learn more about speed of spring here: https://brainly.com/question/20357978

#SPJ1

PLEASE HELP ME ANSWER THE PHYSICS QUESTIONS ON MY PROFILE!!! i will give brainliest to the first to answer!!! this one and the other ones


A 2500 kg train car moving at 20 m/s, east collides with a different train car at rest. The cars stick together after the collision and move together at 13 m/s, east. Find the second car’s mass.


options :


A) 245 kg
B) 50000 kg
C) 9.62 kg
D) 1346 kg

Answers

Refer to the photo taken.

In an amusement park water slide, people slide down an essentially frictionless tube. The top of the slide is 3.1 m above the bottom where they exit the slide, moving horizontally, 1.4 m above a swimming pool.
What horizontal distance do they travel from the exit point before hitting the water?

Answers

They travel a horizontal distance of 4.17 m from the exit point before hitting the water.

What is the law of conservation of energy?

Energy cannot be created or destroyed, according to the law of conservation of energy. However, it is capable of change from one form to another.

height of the slid: h = 3.1 m

horizontal movement above swimming pool: s = 1.4 m

Let the horizonal speed of the people at the end of the  water slide= v

Using energy conservation

mgh = 1/2 mv²

v = √(2gh)

Again time taken for falling s = 1.4 m under gravitation:

t = √(2s/g)

Hence, the horizontal distance  travelled = speed × time

= √(2gh)×√(2s/g)

= √(4hs)

= √(4 × 3.1 × 1.4)

= 4.17 m.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ4

An experimental power plant at the Natural Energy Laboratory of Hawaii generates electricity from the temperature gradient of the ocean. The surface and deep-water temperatures are 28 ∘C and 5 ∘C, respectively.

Answers

The maximum theoretical efficiency of this power plant is 7.9

What is a power plant?

A power plant , also referred to as a generating station or generating plant, is described as an industrial facility for the generation of electric power. Power plants are generally connected to an electrical grid.

The cold temperature =

5°C = 278K

Hot temperature =

28 ° = 273 + 28 K

28° = 303 K

n(efficiency) = 1- Tc/ Th

n(efficiency) = 1- 278/301

n(efficiency) = 1- 0.9175

(efficiency) = 0.082 x 100

n(efficiency) = 8.2 %

Learn more about power plant at: https://brainly.com/question/28349738

#SPJ1

Complete question =

An experimental power plant at the Natural Energy Laboratory of Hawaii generates electricity from the temperature gradient of the ocean. The surface and deep-water temperatures are 28 ∘C and 5 ∘C, respectively. What is the maximum theoretical efficiency of this power plant?

Two protons (charge q = 1.602·10-19 C) move at the same speed v= 1.6 ·105 m/s in opposite directions parallel to the x-axis. At the instant when they are at the same x-position, the proton moving in the negative direction is at distance r= 0.7 m in the positive y-direction with respect to the one moving in the positive direction. What is the magnetic field direction at the point of the proton moving in the negative direction? What is the magnetic force direction experienced by the proton moving in the negative direction?

Answers

The magnitude of the magnetic field at the point of the proton moving in the negative direction is equal to  18.39 × 10⁻¹⁵ T.

The magnetic force direction that is experienced by the proton moving in the negative direction is equal to  4.71 x 10⁻²⁸ N.

What is the magnetic field due to proton?

The magnitude of the magnetic field at distance 'r' at the point of the proton moving in the negative direction is determined as follows;

F = qvB = (kq²)/r²

qvB = kq²/r²

B = kq/vr²

where, k is the coulomb's constant, r is the distance between the protons, q is the magnitude of the charge of the protons, and v is the speed of the proton.

Given the charge n the proton, q = 1.602 x 10⁻¹⁹C

The speed of the proton, v = 1.6 x 10⁵ m/s

B = (9 x 10⁹ x 1.602 x 10⁻¹⁹) / (1.6 x 10⁵ m/s x 0.7 x 0.7)

B = 18.39 × 10⁻¹⁵ T

The magnetic force experienced by the proton in the negative direction is calculated as follows;

F = qvB

F = 1.602 x 10⁻¹⁹ x 1.6 x  10⁵ x 18.39 × 10⁻¹⁵ T

F = 47.1 x 10⁻²⁹ N

F = 4.71 x 10⁻²⁸ N

Learn more about magnetic force, here:

brainly.com/question/13277365

#SPJ1

the purpose of high voltage direct current transmission lines to decrease the number of conductors needed for transmission of power in a grid system.

Answers

Capacitance is a direct issue with alternating current. The amount of power that may be sent across a line and the minimum distance between lines are both constrained by capacitance between parallel lines.

What does voltage mean, exactly?

When charged electrons (current) are forced through a conducting loop by the pressure of an electrical circuit's power source, they may perform tasks like lighting a lamp. In a nutshell, voltage equals pressure and is expressed in volts (V).

What does voltage mean in kid-friendly terms?

The difference in electrical energy between two circuit components is known as voltage. It is measured in volts and is measurable with a voltmeter. The current increases as the voltage grows. Higher electrical voltage and current are required for large electrical appliances.

To know more about Voltage visit:

https://brainly.com/question/13521443

#SPJ4

Suppose the driver in this example now slams on the brakes, stopping the car in 4.00 s. Find (a) the acceleration and
(b) the distance the car travels while braking, assuming the acceleration is constant.

Answers

The initial  velocity of the car is 39.6 m/s and the final velocity is zero. Then, the acceleration of the car is - 9.9 m/s². The average distance covered is 158.4 m.

What is acceleration?

The acceleration of a moving body is the rate of change in its velocity. Acceleration is a vector quantity and is characterized with a magnitude and direction.

Acceleration is the ratio of change in velocity to the change in time. Here, the initial velocity is 39.6 m/s. The car is stopping , therefore the final  velocity is zero.

The time taken to stop is 4 seconds. Hence, the acceleration is :

a = 0 - 39.6 m/s / 4 s

   = -  9.9 m/s²

The distance covered within this time is the product of its velocity and time.

Distance  = velocity × time  = 4 s × 39.6 m/s = 158.4 m

Therefore, the car travels up to a distance of 158.4 m before stops.

To find more on acceleration, refer here:

https://brainly.com/question/2303856

#SPJ1

Your question is incomplete. But your complete question probably was:

Suppose a driver is moving with speed 39.6 m/s, and slams on the brakes, stopping the car in 4. s.

the acceleration and

(b) the distance the car travels while braking, assuming the acceleration is constant.

An object with a mass of 9.0kg has an acceleration of 3m/s the force acting on it is 3n

True or false?

Answers

Answer:

False

Explanation:

This can be proved through the simple force formula, [tex]\displaystyle{\sum \vec F = m\vec a }[/tex]. [tex]\displaystyle{\sum \vec F}[/tex] stands for net force, m is mass and [tex]\displaystyle{\vec a}[/tex] is acceleration.

As you see, force is equal to mass times acceleration. If we substitute mass = 9.0 kg and acceleration = 3 m/s² then we will have:

[tex]\displaystyle{\sum \vec F = 9.0 \, \text{kg} \, \times \, 3 \, \text{m/s}^2}[/tex]

This will result:

[tex]\displaystyle{\sum \vec F = 27 \, \text{kg}\cdot \text{m/s}^2}\\\\\displaystyle{\sum \vec F = 27\, N}[/tex]

Therefore, the force acting on the object should equal 27 N, not 3 N.

A baseball player uses a pitching machine to help him improve his batting average. He places the 73.9 kg machine on a frozen pond. The machine fires a 0.118 kg baseball horizon-

tally at a speed of 40.8 m/s. What is the magnitude of the recoil velocity

of the machine?

Answer in units of m/s.

Answers

According to the law of conservation of momentum, the magnitude of the recoil velocity of the machine is equal to the magnitude of the initial velocity of the baseball, since the total momentum of the system (the machine and the baseball) remains constant. In this case, the magnitude of the initial velocity of the baseball is 40.8 m/s, so the magnitude of the recoil velocity of the machine is also 40.8 m/s. Answer: \boxed{40.8}.

how much work is done when a mass of 3kg (weighing 30N) is lifted vertically through 6m?​

Answers

Answer:

180 J is the answer to how much work is done when a mass of 3kg is lifted vertically through 6 m

To calculate the amount of work done when a mass is lifted vertically through a certain distance, we can use the formula:

Work = Force * Distance

In this case, the mass is 3kg, which weighs 30N, and it is lifted vertically through a distance of 6m. Plugging these values into the formula, we get:

Work = 30N * 6m

= 180 Joules

Therefore, the amount of work done when the mass is lifted vertically through 6m is 180 Joules.

To learn more about work done,

https://brainly.com/question/21854305

https://brainly.in/question/5499258

Consider the AC circuit in the figure. The frequency of the AC source is adjusted while its voltage amplitude is held constant. The lightbulb will glow the brightest at which of the following?
A.high frequencies
B.the brightness will be the same at all frequencies
C.low frequencies

Answers

When the leg it is in has the least resistance, the lightbulb may glow brightest. Because inductive capacitance is inversely proportional to angular frequency, this occurs at low frequencies.

What generates opposition?

Electrons moving through a conductors, for example a metal wire, create an electric current. The ions inside the metal may be struck by the speeding electrons. Resistance results this from, making it harder for the current to flow.

A resistance example is what?

To better understand resistance, imagine how difficult it would be for a person to move from one shop to the next in a crowded market. This circumstance is undoubtedly comparable to an atom trying to get through a wire.

To know more about resistance visit;

https://brainly.com/question/29427458

#SPJ4

The mass of earth is 5.97 x 10²⁴kg, the mass of the moon is 7.35 x 10²² kg and the mean distance of the moon from the center of Earth is 3.84 X 10⁵ km. Calculate the magnitude of the gravitational force exerted by earth on the Moon

Answers

The magnitude of the gravitational force exerted by earth on the moon will be equal to  1.85 × 10⁵ N.

What is gravity?

The fundamental force of attraction operating on all matter is recognized as gravity, also spelled gravity, in mechanics. It has no impact on identifying the interior properties of common matter because it is the weakest force known to exist in nature.

The formation and growth of planets, galaxies, and the universe are all under the influence of this long-range, cosmic force, which further determines the trajectories of objects throughout the universe and the entire universe.

As per the given information in the question,

Mass of earth, M₁ =  5.97 × 10²⁴ kg

Mass of moon, M₂ = 7.35 x 10²² kg

Distance between moon from center of earth, r = 3.84 X 10⁵ km

G = 6.67×10¹¹ Nm² / kg²​

Use the formula of force,

F = GM1M2 / r²

F = [(6.67×10¹¹) (5.97 × 10²⁴)(7.35 x 10²²)]/( 3.84 X 10⁵)²

F = 1.85 × 10⁵ N

To know more about Gravity:

https://brainly.com/question/4014727

#SPJ1

A particular transition of the rubidium atom emits light whose frequency is 3.84 Ã 10^14 Hz. Is this light in the visible spectrum? If so, what is the color of the light?

Answers

The frequency of 3.84 x 10^14 Hz corresponds to a color in the blue-violet range of the visible spectrum. So, the color of the light emitted by the rubidium atom is blue-violet.

The frequency of light determines its position in the electromagnetic spectrum, which includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. The frequency of light that is visible to the human eye is in the range of approximately 400-700 nanometers (nm). This corresponds to a frequency range of approximately 7.5 x 10^14 Hz to 4.3 x 10^14 Hz.

The frequency of light emitted by the rubidium atom, 3.84 x 10^14 Hz, is within this range, so it is in the visible spectrum. To determine the color of the light, you can use the relationship between the frequency of light and its corresponding color. The colors of the visible spectrum, from lowest frequency to highest, are red, orange, yellow, green, blue, indigo, and violet.

To know more about frequency

https://brainly.com/question/5102661

#SPJ4

Suppose that you would like to study star A all year round. Its declination is 25 degrees above the celestial equator. At which of the following locations on Earth could you be to observe this star all year round?
(a) at a latitude of 67 degrees N
(b) only at the South Pole
(c) at a latitude of 63 degrees N
(d) at a latitude of 25 degrees N

Answers

The declination is also known as latitude hence, star A is at a latitude of 25 degrees N from the earth so, option D is correct.

What is the equator?

A hypothetical line that would make a large circle around the Earth's surface, equidistant from the poles and on a plane perpendicular to the axis of rotation of the planet, is known as an equator. It establishes the boundary between the Northern and Southern hemispheres of the Earth and serves as the standard for measuring latitude.

Considering that, star A's declination is 25 degrees above the celestial equator. The star is located at a latitude of 25 degrees to the North because the declination is also known as the latitude. Therefore, the observer must be (d) located at a latitude of 25 degrees N in order to examine the star all year long.

To know more about the equator:

https://brainly.com/question/11562243

#SPJ4

what is the wavelength of the longest wavelength standing wave pattern that can fit on this guitar string? express your answer in centimeters. view available hint(s)

Answers

Therefore, only half of the wave fits since it is evenly divided and a whole crest fits on the string; the longest wavelength standing-wave pattern which can fit on this guitar has a wavelength of 1 = 120 cm.

What do wavelengths and frequencies refer to?

The distance of two wave crests is known as the wavelength, and it also applies to troughs. The amount of vibrations that travel across a certain area in one second is measured in cycles each second, or frequency.

How is wavelength determined?

The wavelength is calculated by calculating the distance between two identical positions on adjacent waves. The distance of one compressive to the next or from one conformational to the subsequent is measured in order to calculate the wavelength of such a longitudinal wave.

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ4

Starting from long-run equilibrium at A with output equal to and the price level equal to P1, if there is an unexpected monetary contraction that shifts aggregate demand from AD1 to AD3, then the short-run nonneutrality of money is represented by the movement from:

Answers

If there is an unexpected monetary contraction that shifts aggregate demand from AD1 to AD3, starting from long-run equilibrium at A with output equal to and the price level equal to P1, then the short-run non neutrality of money is represented by the movement from option A: point A to point B.

What is the long-run equilibrium  about?

At point A, the economy is in long-run equilibrium, with output equal to and the price level equal to P1. The unexpected monetary contraction shifts aggregate demand from AD1 to AD3, which reduces the demand for goods and services in the economy.

This reduction in demand causes a decrease in the price level and a decrease in output. As a result, the economy moves from point A to point B on the AD-AS curve, where output is lower and the price level is lower.

Therefore, This movement represents the short-run non neutrality of money, as the unexpected monetary contraction has caused a change in both output and the price level in the short run.

Learn more about long-run equilibrium from

https://brainly.com/question/6275304

#SPJ1

See full question below

3. (Exhibit: AD–AS Shifts) Starting from long-run equilibrium at A with output equal to Y

and the price level equal to P1, if there is an unexpected monetary contraction that shifts

aggregate demand from AD1 to AD3, then the long-run neutrality of money is

represented by the movement from:

A) A to B.

B) A to G.

C) A to C.

D) A to D.

During the launch from a board, a diver's angular speed about her center of mass changes from zero to 6.60 rad/s in 250 ms. Her rotational inertia about her center of mass is 12.0 kg·m2.
(a) During the launch, what was the magnitude of her average angular acceleration?
rad/s2
(b) During the launch, what was the magnitude of the average external torque on her from the board?
N·m

Answers

Her average rotational acceleration is equal to the board's average external torque over her, which is Nm234.16 Nm, or 28.18 rad/s.

Simple definition of angular acceleration.

An object rotating experiences a change of angular velocity per unit of time, which is quantified as angular acceleration (also known as rotational acceleration). It is a vector quantity that has two strongly outlined directions or senses and a magnitude component.

Given: Initial angular speed w, = 0 rad; Initial and final angular speeds cf, = 6–20 rad/s lime

Rotational inerlia I (= 12 leg m° at time t = 220 x163 5 Rotational angulas acceleration wU = wo tat 6.20 = 0 + xx 220 x103 6.20 = = 0.02918 x10 220 x103 a = 28.18 rad/s -> Quality varies torque N= IX 12x28.18 234.16 Nm

To know more about angular acceleration  visit:

https://brainly.com/question/29428475

#SPJ4

determine the moment with the following data: weight (lb) mom/1000 empty weight 1,350 51.5 pilot and front passenger 340 --- fuel (std tanks) capacity --- oil, 8 qt. --- ---

Answers

Currently, the information is as follows: weight (lb) (lb) mother/1000 empty weight 74.9 pound-inches.

Describe a weight example.

In the International System of Units (SI), the newton is used as the unit of measurement for force, which is used to quantify weight. On the surface of the Earth, a one kilogram object weighs around 9.8 newtons, but the weight of the same thing on the Moon is only about one-sixth as great.

The definition of weight in physics

All things near Earth are constantly under the influence of weight. All things are subject to the gravitational attraction of the Earth, which pushes them all toward its core.

To know more about Weight visit:

https://brainly.com/question/29254543

#SPJ4

If a football quarterback runs into and tackles another player by grabbing onto them, what type of collision would this technically be?
a. Elastic
b. Inelastic

Which of the following would be an example of a closed system?

a. A person pushing a refrigerator box across a rough floor
b. A water bucket being pulled up by rope from a well
c. A rolling oil drum across a smooth, frictionless marble floor
d. A large moving rock slowing down while ploughing through loose sand

Answers

''If a football quarterback runs into and tackles another player by grabbing onto them'' is Elastic collision. A closed system is a rolling oil drum across a smooth, frictionless marble floor.

What is meant by Elastic collision?A collision between two bodies in physics is referred to as an elastic collision if their combined kinetic energy stays constant. There is no net conversion of kinetic energy into other forms, such as heat, noise, or potential energy, in an ideal, fully elastic collision.When two small objects collide, the kinetic energy of the collision is first transformed into the potential energy of an attractive or repulsive force between the particles. (when the particles move against this force, that is, when the angle between the force and the relative velocity is acute), and then this potential energy is transformed back into the kinetic energy of the collision (when the particles move with this force, i.e. the angle between the force and the relative velocity is acute).

Learn more about Elastic collision refer to :

https://brainly.com/question/12644900

#SPJ1

a motor is most powerful, when the: group of answer choices the workload is longer the workload is shorter time interval for the work is shorter.

Answers

The key idea is that time and power are inversely related to each other for a given quantity of work. A more powerful engine should be able to complete the same amount of work faster, according to the power equation.

Which of the following best describes how quickly work is completed?

The rate of doing work is known as power. It is the same as the amount of energy used up in a given amount of time. The joule per second (J/s), or SI system, is the unit of power.

Is negative work even possible?

Work may be positive or negative; if it has a component in the same direction as the object's displacement, it is positive work.

To know more about work visit:-

https://brainly.com/question/19382352

#SPJ4

6. The work done in pushing a 40 kg chair from the kitchen table to 10 meters down the
hall would be about_
,neglecting friction.
A. 40J
B. 4000J
C. OJ
D. 0.25J

Answers

Answer:

B

Explanation:

W = f * d

   = mg * d

   = 40(9.81)(10) =~4000 J

If a piece of elastic wire 2 meters long and 3 centimeters in diameter increases its length by 2.5 cm when a force of 0.25 is applied to its area than Find the force applied on the string and the Young's scale of the string?​

Answers

Answer:

The force applied on the string is 0.25 N and the Young's modulus of the string is 10 N/m

Explanation:

The force applied on the string can be calculated using the equation:

Force = (change in length * Young's modulus) / original length

The Young's modulus of the string can be calculated using the equation:

Young's modulus = (Force * original length) / change in length

Plugging in the given values:

Force = (2.5 cm * Young's modulus) / 2 m

= (0.025 m * Young's modulus) / 2 m

= 0.025 * Young's modulus

= 0.25 (given)

= 0.25 N

Young's modulus = (0.25 N * 2 m) / 0.025 m

= 10 N/m

An object is hung from a spring balance attached to the ceiling of an elevator cab. The balance reads 40 N when the elevator is standing still.
(a) What is the reading when the elevator is moving upward with a constant speed of 9.0 m/s?
1 N
(b) What is the reading when the elevator is moving upward with a speed of 9.0 m/s while decelerating at a rate of 1.1 m/s2?
2 N

Answers

(a) The reading when the elevator is moving upward with a constant speed of 9.0 m/s is 40 N.

(b) The reading when the elevator is moving upward with a speed of 9.0 m/s while decelerating at a rate of 1.1 m/s² is 35.11 N.

What is acceleration?

The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. In vector quantities, accelerations exist (in that they have magnitude and direction).

The direction of the net force that is acting on an object determines its acceleration.

According to the given question:

Balance force ( W ) = 40 N

a)  moving upward with constant velocity (V ) = 9 m/s.

The reading will not change since it is moving with constant velocity

W = 40 N

b) Moving upward with V = 9 m/s and decelerating at the rate of

(a ) = 1.1 m /s²

The net force ( F ) = W - ma

where m = W/g = 40/9 = 4.45 kg

F = 40 - 4.45 * 1.1 = 35.11 N

Learn more about acceleration

brainly.com/question/460763

#SPJ4

The terminals of a battery are connected across two resistors in parallel. The resistances of the resistors are not the same. Which of the following statements is correct? Choose all that are correct. The potential difference is greater across the resistor closer to the battery. The resistor with the larger resistance carries less current than the other resistor. The resistor with the larger resistance carries more current than the other resistor. The potential difference across the larger resistor is greater than the potential difference across the smaller resistor. The potential difference across each resistor is the same.

Answers

Answer:

1) the potential difference is the same for both resistors

2) the larger resistor must carry less current because of (1)

3) the potential difference is the same for both resistors - given (everything depends on this fact)

A bare helium nucleus has two positive charges and a mass of 6.64 ✕ 10−27 kg.

Answers

Answer:

The answer is the question 6.64*10-24=39.4

Other Questions
One factor of the function f(x) = x3 6x2 + 11x 6 is (x 3). Describe how to find the x-intercepts and the y-intercept of the graph of f(x) without using technology. Show your work and include all intercepts in your answer Why is dichloromethane (dcm) a good organic solvent to solubilize benzoic acid and acetanilide? What is the point of Yorick? Mark all that is TRUE of the three Buddhist schools Group of answer choicesTheraveda Buddhism is the earliest of the three Buddhist schools. Vajrayana Buddhism teaches that enlightenment can happen quickly.Mahayana Buddhism stresses that the monastic life is necessary to attain nirvana.Theravada and Mahayana Buddhists both regard the Pali Canon as authoritative.Compassion is a central tenet within Mahayana Buddhism Which angle of rotation will carry a polygon onto itself? What were Wilson's main goals? What are the 10 common genetic disorders? Identify the part of the neuromuscular junction at B: B A Axon Terminal O Dendrites Axon branches O Muscle fiber Identify the structure at A: . A O muscle fiber dendrites O axon terminals O axon branches How is Claudius guilt revealed Act 3? How do you find the height of an isosceles triangle without the base? How long does a small tattoo take? 2. Where does your genetic makeup come from?half of the genetic makeup from the mother and half from the fatherOthe genetic makeup from the father and nothing from the motherOthe genetic makeup from neither parentOthe genetic makeup of the mother and nothing from the father What types of clouds make rain? What should I do if my face is swollen from tooth infection? which of the following is true about overloaded methods? a. java cannot use a method's return type to tell two overloaded methods apart b. java cannot use a method's parameters to tell two overloaded methods apart c. you can only overload methods that have parameters. d. all overloaded methods must have different names. e. none of the above What is the main claim of the author what is the main purpose of the author? reversal of indoleamine 2,3-dioxygenase-mediated cancer immune suppression by systemic kynurenine depletion with a therapeutic enzyme for each password, how would it be cracked (what kind of attack can crack this password), and is it a weak or strong password? Which is a factor of x 7x 6? What happens at the Duke and Dauphin performance?