Explain why hydrogen is a substance.
Answer:
Hydrogen is a substance because it has mass and combined with other molecules it can make another substance such as water.
Explanation:
Which of the following are characteristics of ionic compounds? Check all that apply. have high melting and boiling points are hard can exist as solids, liquids, or gases at room temperature (25°C) are good conductors of electricity when dissolved in water
Answer:
A-Have high melting and boiling points
B- Are hard
D- Are good conductors of electricity when dissolved in water
Explanation:
The characteristics of ionic compounds are: have high melting and boiling points ,are hard , good conductors of electricity when dissolved in water.
Explanation:
Properties of ionic compounds
These are the compounds have ionic bond that is complete transfer of electrons from one atom to another.They have high melting pointsThey have higher boiling pointsIn molten state they conduct electricityThey are soluble in water and conducts electricity in their aqueous state.Hard and brittle solidsSo, from this, we can conclude that from the given characteristics the characteristics of ionic compounds are: have high melting and boiling points ,are hard , good conductors of electricity when dissolved in water.
Learn more about ionic compounds here:
brainly.com/question/7193259?referrer=searchResults
brainly.com/question/1669915?referrer=searchResults
In steel, what smaller atom fits into the empty spaces within the iron crystal lattice?
Answer:
The smaller atoms become trapped in the spaces between the atoms in the crystal matrix, called the interstices. This is referred to as an interstitial alloy. Steel is an example of an interstitial alloy, because the very small carbon atoms fit into interstices of the iron matrix.If you have 1kg of carbon and 1 kg of gold, they will weigh the same.
If 10 ml of orange juice has a mass of 5 g, what would the density of Orange
Juice be? (Hint: Density=massivolume)? *
Answer:
Sep by step to determine the mass of 25 mL of orange juice
Explanation:
Measure mass of container , then add 25 mL of OJ and subtract the difference
Does temperature impact the ability of water to dissolve things? How do you know?
Answer:
The temperature of the water affects the amount of dissolving but it also affects the rate of diffusion.
Explanation:
Answer:
Yes, temperature can impact the ability of water to dissolve things, the solubility increases with temperature.
Explanation:
The increase in kinetic energy that comes with higher temperatures allows the solvent molecules to more effectively break apart the solute molecules that are held together by intermolecular attractions.
Why do scientists study seismographs
Answer:
to study sub terranian earth movements
Explanation:
8H earth science
Answer:
B-to determine the location of an epicenter
Explanation:
Seismologists study earthquakes by going out and looking at the damage caused by the earthquakes and by using seismographs. A seismograph is an instrument that records the shaking of the earth's surface caused by seismic waves and determine the location of an epicenter
-Source: Geo.mtu.edu
A common misconception people have is that sugar is energy and energy is sugar but you know better. Create a clear explanation that could be used to clear up this misconception.
A clear explanation of misconception of sugar is energy and energy is sugar is below.
What are sugars?Sugars are the disaccharide carbohydrate, it means they are formed by the combination of two monosaccharides.
One of the component of the sugar is glucose and we know that glucose is the source of energy in our body. So, sugars are naturally present in many food substance which in turn breaks down in the glucose and their composite constituent and releases energy. But we can never compare sugar as the main source of energy or equivalent to energy.
Hence, Energy means sugar is the misconception.
To know more about sugars, visit the below link:
https://brainly.com/question/501165
What is responsible for the high electrical conductivity of a metal
Answer:
Electrical conductivity in metals is a result of the movement of electrically charged particles. Because valence electrons are free to move, they can travel through the lattice that forms the physical structure of a metal.
Explanation:
In 5.49 seconds, 1.80 g of argon-35 decay to leave only 0.225 g. What is the half-life of argon-35?
Answer:
Half life = 1.83 sec
Explanation:
Given data:
Total amount of Ar-35 = 1.80 g
Amount left after 5.49 sec = 0.225 g
Half life of Ar-35 = ?
Solution:
At time zero = 1.80 g
At first half life = 1.80 g/2 = 0.9 g
At 2nd half life = 0.9 g/2 = 0.45 g
At 3rd half life = 0.45 g/2 = 0.225 g
Half life:
Half life = Time elapsed / number of half lives
Half life = 5.49 sec / 3
Half life = 1.83 sec
Humans and animals are not able to use all the energy that is obtained The extra energy is released as:
A. light
B. sound
C. heat
D. kinetic
Answer:
The C. Heat
Explanation:
It is logical, when you workout you feel hot cause your body emanates heat
Which cellular process allows a cell to make an exact copy of itself?
A. mitosis
B. photosynthesis
C. respiration
D. waste elimination
Explanation:
the answer is letter A. mitosis
What is Zirconium-78 protons and neutrons?
Answer:
Zirconium has 40 protons and 51 neutrons
A rock weighing 75.0g is placed in a graduated cylinder displacing the volume from 31.4 ml to 36.5ml. What is the density of the rock in grams /cubic centimeter.
Answer:
14.71 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
volume = final volume of water - initial volume of water
volume = 36.5 - 31.4 = 5.1 mL
But
1 mL = 1 cm³
5.1 mL = 5.1 cm³
From the question we have
[tex]density = \frac{75}{5.1} \\ = 14.705882..[/tex]
We have the final answer as
14.71 g/cm³Hope this helps you
How many grams of H2SO4 do I need to use in order to produce 3.01 moles of water? consider the equation. _Ca(OH)2 + _H2SO4 = _CaSO4 + _H20
Answer:
148 g H₂SO₄
General Formulas and Concepts:
Chemistry - Stoichiometry
Reading a Periodic TableBalancing RxN'sUsing Dimensional AnalysisExplanation:
Step 1: Define
RxN: Ca(OH)₂ + H₂SO₄ → CaSO₄ + H₂O
Given: 3.01 moles H₂O
Step 2: Balance RxN
Ca(OH)₂ + H₂SO₄ → CaSO₄ + 2H₂O
Need the same amount of O's and H's on both sidesStep 3: Define conversions
Molar Mass of H - 1.01 g/mol
Molar Mass of S - 32.07 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of H₂SO₄ - 2(1.01) + 32.07 + 4(16.00) = 98.09 g/mol
Step 4: Stoichiometry
[tex]3.01 \ mol \ H_2O(\frac{1 \ mol \ H_2SO_4}{2 \ mol \ H_2O} )(\frac{98.09 \ g \ H_2SO_4}{1 \ mol \ H_2SO_4} )[/tex] = 147.625 g H₂SO₄
Step 5: Check
We are given 3 sig figs. Follow sig fig rules.
147.625 g H₂SO₄ ≈ 148 g H₂SO₄
Which of the following is an indication of a chemical reaction? ( freezing, melting ,release of heat ,all of the above)
Answer:
all of the above
Explanation:
Answer: All of the above
Explanation:
is density defined as the volume in a given mass orthe mass in a given volume?
Answer:
mass in a given volume
Explanation:
Density is the mass in a given volume or mass per unit volume of a substance.
Mass is defined by the amount of matter present in a substance.
Volume is the space occupied by a body.
Density is the mass divided by the volumeMathematically;
Density = [tex]\frac{mass}{volume}[/tex]
Lucia is playing with magnetic toy vehicles. She has two identical toy vehicles (purple and pink) that start on opposite sides of a center magnet that cannot move. She moves both vehicles one space closer to the center magnet.
How did the potential energy of the two vehicles change? Did the potential energy of one vehicle change more than the other? Why do you think so?
Answer:
The potential energy of the two vehicles increased because they were moved against the magnatic forces. The potential energy of the pink car increased more then the potential energy of the purple car because the pink car was closer to the center magnet.
Explanation: I had this same exact question on a quiz and this was my response and I got a 100%
The effects of the movement of the cars closer to the center of the magnet are ;
A) The potential energy of the Two vehicles will be increased
B) The potential energy of one car ( pink car) will change more than purple car due to the distance between the pink car and the center magnet.
Potential energy is the energy contained in a body at rest, The increase in potential energy occur when an object continues to be at rest ( i.e. opposes movement ).
When the cars are moved closer to the center magnet the cars will oppose the motion because their movement is against the magnetic forces that exist between the center magnet and the cars ( i.e. like pole repel while unlike poles attract ). so as Lucia moves the cars closer their potential energies will continually increase ( i.e. the closer the car the higher its potential energy ).
Therefore the pink car been closer to the center magnet will experience a higher change in its potential energy than the purple car.
Hence we can conclude that The effects of the movement of the cars closer to the center of the magnet are ; The potential energy of the Two vehicles will be increased, The potential energy of one car ( pink car) will change more than purple car due to the distance between the pink car and the center magnet.
Learn more : https://brainly.com/question/17637022
7. Calculate the amount of energy required heat 100.g to
H2O(s) changes to H2O(l) at 0°C
Answer:
33300J
Explanation:
Given parameters:
Mass of ice = 100g
Unknown:
Amount of energy = ?
Solution:
This is a phase change process from solid to liquid. In this case, the latent heat of melting of ice is 3.33 x 10⁵ J/kg.
So;
H = mL
m is the mass
L is the latent heat of melting ice
Now, insert the parameters and solve;
H = mL
mass from gram to kilogram;
100g gives 0.1kg
H = 0.1 x 3.33 x 10⁵ = 33300J
How does energy change form when friction causes the temperature of an object to increase?
Friction causes the molecules on rubbing surfaces to move faster, therefore they have more energy. This gives them a greater temperature, and they feel warmer.
What is friction ?The term friction is defined as the resistive force that occurs when two bodies in contact move relative to one another.
Adhesion between body surfaces, and the adhesion is the molecular force that occurs when two materials come into contact with each other are the causes of friction.
Friction is an everyday force that is generated by two surfaces when they are interacting. When these surfaces slide against each other, this interaction increases the thermal energy of the two surfaces.
Thus, Friction causes the molecules on rubbing surfaces to move faster, therefore they have more energy.
To learn more about friction, follow the link;
https://brainly.com/question/13000653
#SPJ6
Which elements form ions that are usually colored in solid compounds and in solution? A. alkali metals B. alkaline earth metals C. transition elements D. halogen elements
Answer:
C. transition elements
Explanation:
Transition elements are groups of metallic elements that have partially filled d orbitals. They occupy the d-block of the periodic table (Group 3-12). Examples of elements that fall under this category are Nickel (Ni), Cobalt (Co), Copper (Cu), Zinc (Zn) etc. Transition metals have outstanding properties that distinguishes them from other elements.
One of these properties is their ability to form colored compounds due to their unfilled d electron shells. They form ions that are usually colored in solid compounds and in solution.
The elements that have been colored in the solid and solution have been transition elements.Thus, option C is correct.
The periodic table has been consisted of metals, non-metals, and metalloids. The presence of valence electrons of the elements has been responsible for the chemical properties of the elements.
The transition elements have been the metals that have been consisted of electrons in the d orbitals. The presence of electrons results in the atom to excited to higher energy and have radiations in the visible region.
Thus, the aqueous and solid transition elements have been colored. Thus, option C is correct.
For more information about the colored compounds, refer to the link:
https://brainly.com/question/906460
Helpppppp please helpppp helpppp
How could two objects have the same temperature but different thermal energies? One object could have more particles and greater total kinetic energy. One object could have more particles and lesser total kinetic energy. One object could have more calories. One object could have more heat.
Answer:
One object could have more particles and greater total kinetic energy
Explanation:
The higher the temperature the more the particles. So, when we have high temperature, there is more particles interacting.
Temperature can simply be defined or gotten by taking the average of of the kinetic energy of the particles in the object that is the keywords here are TAKING THE AVERAGE KINETIC ENERGY
Thermal energy is the energy that can be gotten from adding up all the total kinetic energy of the particles in the object. So, the keywords here are; ADDING UP THE TOTAL KINETIC ENERGIES.
So, when two particles of the same temperature have the different thermal energy it means that One object could have more particles and thus having greater total kinetic energy.
When there is just one atom of an element in a molecule, how
is this atom represented in a chemical formula?
Answer:
Molecular formula, C8H16O4; empirical formula, C2H4O
Explanation:
When there is just one atom of an element in a molecule, no subscript is used in the chemical formula.
Plz help on question 4
The four level pyramid model revolves around the. Who use the system
Answer:
Explanation: The pyramid model of four level in an organization is based on and is depends on the various levels of the hierarchy systems or management in the organization. These four level is of different types of the Information System in the organization.
Explanation:
most inferences about the characteristics of Earth's mantle and core are based on
Answer:
Properties of seismic waves
Explanation:
Most of the inferences about the characteristics of earth's mantle and core are based on the properties of seismic waves.
Also, some other electromagnetic waves have been used to map the properties of the earth's interior. Seismic waves especially body waves behaves differently in certain medium. P -waves are able to pass through any material medium. S -waves can only pass through solid. They are cut off in fluid medium.Newton’s second law can be written using two formulas, what are they?
Answer:
In equation form, Newton's second law of motion is a=Fnetm a = F net m . This is often written in the more familiar form: Fnet = ma. The weight w of an object is defined as the force of gravity acting on an object of mass m. ... Friction is a force that opposes the motion past each other of objects that are touching.
Explanation:
have a nice day :)
please help!!!
Which of the following are found as the lithosphere moves a volcano away from a mantle plume?
a- sea mounts
b- lithospheric mountains
c- subduction zones
d- none of these
Answer:
c- subduction zones
Explanation:
A mental plum is generally found within the mantel and is a mechanism of convection, the plume is often invoked as the causes of volcanic hotspots. Such can be seen on Iceland and Hawaii islands. They represent a large volume of volcanism near the plate boundary. Mantle plumes are believed to be a source of molten magma from the earth.whats the difference between spring tides and neap tides
Answer:
Spring tides have higher high tides and lower low tides whereas neap tides have lower high tides and higher low tides.
Explanation:
Answer:
Spring tides have higher high tides and lower low tides whereas neap tides have lower high tides and higher low tides. Hence, the range (difference in water level between high and low tide) is much larger in a spring tide than in a low tide.