The successive ionization energies for a given element are listed. How many valence electrons does it have?

the answer is Nitrogen.

Answer:  The precipitate formed is [tex]BaSO_4[/tex]

Explanation:

A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid or precipitated form are represented by (s) after their chemical formulas.  

A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.  

The balanced chemical equation is:

[tex]K_2SO_4(aq)+BaCl_2(aq)\rightarrow BaSO_4(s)+2KCl(aq)[/tex]

Answer:

O3S

Sulfur Trioxide

Explanation:

Answer:

24 silver atoms.

Explanation:

11.5 moles of silver atoms will have = 11.5×6.022×1023=6.925×1024 11.5 × 6.022 × 10 23 = 6.925 × 10 24 silver atoms.

Hope this helps!

Brain-List?

According to Avogadro's number, there are 6.926×10²⁴ representative particles in 11.5 moles of silver.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number or number of moles×Avogadro's number=11.5×6.023×10²³=6.926×10²⁴ atoms.

Thus, there are 6.926×10²⁴ representative particles in 11.5 moles of silver.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ5

Answer:

520 mg Al(OH)₃

Explanation:

The reaction that takes place is:

Now we calculate how many moles of each reagent were added, using their concentrations and volumes:

10 mmol of Al(NO₃)₂ would react completely with (10*3) 30 mmol of KOH, there are not as many KOH mmol, so KOH is the limiting reactant.

We calculate how many moles of Al(OH)₃ are produced, using the limiting reactant:

Finally we convert mmol of Al(OH)₃ to mg, using its molar mass:

Answer:

Most of these rocks are not made up of common geometric shapes

Explanation:

Because most rocks are not made up of common geometric shapes, it would be difficult or impossible to find the volume of a rock using a ruler; there would be no easy way to measure the rock's volume using a ruler

Hope this helped!

Answer:  B

a chemical change, because a gas is being formed

Explanation:

Answer:

B

Mark Brainliest please

Explanation:

Answer:

C. 96,657 Pa, 966 millibar, 725 Torr

Explanation:

The pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.

Pressure is defined as the force that is applied perpendicularly to an object's surface in relation to the area that it is dispersed over. Pressure can actually be a very good thing. Stress only occurs and has a fully negative impact when it continues to grow and that sensation of serenity and order is replaced with one of being out of control.

Given pressure = 725 mmHg

1 mmHg = 133.32 Pa

725 mmHg = 133.32 x 725 Pa

                  = 96,657 Pa

1 mmHg = 1.333 millibar

725 mmHg = 725 x 1.333 millibar

                   = 966 millibar

1 mmHg = 1 torr

725 mmHg = 725 Torr

Thus, the pressure of 725 mmHg in Pa, millibars, and Torr is 96,657 Pa, 966 millibar, 725 Torr. Hence option C is correct.

To learn more about pressure, refer to the link below:

https://brainly.com/question/15175692

#SPJ2

The conjugate acid : H₂CO₃

Given

Reaction

HCO₃− + H₂S → H₂CO₃ + HS−

Required

The conjugate acid

Solution

Bronsted-Lowry

Acid ⇒ H⁺ + conjugate base

Bases + H⁺⇒ conjugate acids

Acid and conjugate base : H₂S and HS−

Base and conjugate acid : HCO₃− and H₂CO₃

H₂S gives (H⁺), then the remaining acid is a conjugate base  HS−

HCO₃− receives (H +), then the conjugate acid H₂CO₃

Answer:

The correct answer is D.

Explanation:

Edge'21

Answer:

man my brain like that to

Explanation:

Answer:

man my brain like that to

Explanation:

Answer:

D

Explanation:

organism

Answer:

The answer should be organism

Answer:

Element is made from same type of atoms

While atom is present in element made up of different particles like proton neutrons electron etc

Explanation:

Answer:

The partial pressure of helium gas in a gaseous mixture of helium and hydrogen is the pressure that the helium would exert in the absence of the hydrogen. equal to the total pressure divided by helium's molar mass. O equal to the total pressure divided by the number of helium atoms present.

Hope this Helps (✿◡‿◡)

Answer: answer is C on Edge

Explanation:

An arrow is fired at a target on a high wal. The energy change between the moment the arrow is fired and the moment it hits the target is the kinetic energy decreases as potential energy increases. The correct option is c.

Energy neither be created nor destroyed. It just only is transferred from one form to another form. This is called energy change. When any reactions happen, one form of energy is changed into another form.

There are many kinds of energy. These energies are kinetic energy, potential energy, gravitational energy, etc. Kinetic energy is the energy that is used when any work is done. Potential energy is the energy that is stored form of energy.

Therefore, the correct option is c, The kinetic energy decreases as potential energy increases.

To learn more about energy change, refer to the link:

https://brainly.com/question/22255429

#SPJ6

Answer:

None of the above

but it must be:

for Copper(I)chloride

3CuCl + Al ==> AlCl3 + 3Cu

for Copper (II) chloride

3CuCl2 + 2Al ==> 2AlCl3 + 3Cu

Answer:

17.031 g/mol

Explanation:

Answer:

The First Battle of Panipat was fought between the invading forces of Babur and the Lodi Empire, which took place on 21 April 1526 in North India. It marked the beginning of the Mughal Empire. This was one of the earliest battles involving gunpowderfirearms and field artillery.

For you to write an essay on  Panipat first bring into view

Then write a brief story using this format.

In writing this essay, you must consider the structure and content of the essay or short note

For structure kick off with

In conclusion, for the content of the short note you can consider this,

Panipat fought its first battle on 21 April 1526 in the North of India, This battle was fought between the invading powers of Babur and the Lodi Empire.

Read more on History

https://brainly.com/question/6838058

Identify the type of solid from the description. Select from the following choices: metallic solid, network solid, molecular solid, ionic solid, or amorphous solid. a. This solid is ductile and conducts electricity.b. This solid is not conductive and has a low melting point.

Answer:

See explanation

Explanation:

A is a Metallic Solid

Let us look again at the physical properties of metals;

Metals are

We can now see that both ductility and electrical conductivity are metallic properties.

B is a Molecular solid

Molecules are formed when atoms share electrons. In molecules, there are no free electrons hence molecules do not conduct electricity.

Secondly, molecules are held together in the solid state by weak dispersion forces hence molecular solids have a low melting point.

Answer and Explanation:

Since the compound sodium nitrate (NaNO₃) is a strong electrolyte, it dissociates completely into ions when is dissolved in water, as follows:

NaNO₃(s) → Na⁺(aq) + NO₃⁻(aq)

So, the solid compound produces the sodium cation (Na⁺) and the nitrate anion (NO₃-) in the aqueous medium.

The answer is A. The vibration caused by the waves through the air eventually weaken, which is why sound diminishes easily over distance.

The average atomic mass will be 3.70 amu

We have to obtain the average atomic mass by multiplying the mass of each isotope in amu by the relative abundance of the given isotope as contained in the data of the question.

Hence;

Average atomic mass;

(0.30 * 4) + (0.20 * 5) + (0.50 * 3)

= 1.20 + 1.00 + 1.50

= 3.70 amu

https://brainly.com/question/13292428

Answer:

The Atomic Number

Explanation:

The question is incomplete, here is the complete question:

A chemist must prepare 550.0 mL of hydrochloric acid solution with a pH of 1.60 at [tex]25^oC[/tex]. He will do this in three steps: Fill a 550.0 mL volumetric flask about halfway with distilled water. Measure out a small volume of concentrated (8.0M) stock hydrochloric acid solution and add it to the flask. Fill the flask to the mark with distilled water. Calculate the volume of concentrated hydrochloric acid that the chemist must measure out in the second step. Round your answer to 2 significant digits.

Answer: The volume of concentrated hydrochloric acid solution is 1.7 mL.

Explanation:

To calculate the hydrogen ion concentration, we use the formula:

[tex]pH=-\log [H^+][/tex]

We are given:

pH = 1.60

Putting values in above equation, we get:

[tex]1.60=-\log [H^+][/tex]

[tex][H^+]=antilog (-1.60)[/tex]

[tex][H^+]=0.0251M[/tex]

To calculate the volume of concentrated solution, we use the equation:

[tex]M_1V_1=M_2V_2[/tex]

where,

[tex]M_1\text{ and }V_1[/tex] = molarity and volume of concentrated acid solution

[tex]M_2\text{ and }V_2[/tex] = molarity and volume of diluted acid solution

We are given:

[tex]M_1=8.0M\\V_1=?mL\\M_2=0.0251M\\V_2=550mL[/tex]

Putting values in above equation, we get:

[tex]8.0\times V_1=0.0251\times 550\\\\V_1=\frac{0.0251\times 550}{8.0}=1.7mL[/tex]

Hence, the volume of concentrated hydrochloric acid solution is 1.7 mL.

Answer:

837.02 ohms

Explanation:

Step one:

Given data

Frequency= 60Hz

L1= 0.75H

L2= 1.47H

When inductors are connected in series, the total inductance is the sum of the individual inductance

Step two:

Inductor 1

[tex]Xl1= 2\pi fL\\\\Xl1= 2*3.142*60*0.75\\\\Xl1= 282.78 ohms[/tex]

Inductor 2

[tex]Xl2= 2\pi fL\\\\Xl2= 2*3.142*60*1.47\\\\Xl2= 554.24 ohms[/tex]

The total inductance is

=282.78+554.24

=837.02 ohms

Answer:

Explanation:

I HOPE IT HELPS :)

Solution :

lt is given that in 18 mL of water their are [tex]6.022\times 10^{23}[/tex] water molecules.

We know, that 1 molecule of water contains 2 atoms of hydrogen.

Hydrogen atom in 18 mL water is,

[tex]2\times 6.022\times 10^{23} = 12.044 \times 10^{23}[/tex] .

So, number of hydrogen atoms in 1 L = 1000 mL are :

[tex]N = \dfrac{1000}{18}\times 12.044\times 10^{23}\\\\N = 6.69 \times 10^{25}\ atoms[/tex]

Hence, this is the required solution.