The Tesla Model S Electric vehicle can go from 0 to 60 mi/hr (26.8 m/s) in only 1.9 seconds! How far does it move from rest until it reaches 60 mi/hr? Round your answer to the nearest whole meter.

(a) If am going to measure the current and that desired current passes through I will an existing resistor to find the current using ohm's Law.

V= IR

Using the ohms Law another variable we can find is let Lenovo. To find Current any variable with two

The voltage & resistance.

So, I = V R

R is to be known.

If V= 1.5V, Then T= 1-5 100 = 0.015 Ampere

R = 100-2

But this is theoretical as the wire the load and even the supply have internal resistance. we Considering Also there are superconductors with zero resistance due to their properties in negative temperatures.

b) measure the current and the desired current doe as to not pass through the existing resistor,

Theoretically, if there is no resistance then it is a short Circu and the current will be infinite But Practically wires have resistance and simply I will find the Kurrent value by breaking the with and connecting the circuit.

We measure the current using a so-called ammeter. Some types of ammeters have a pointer on the dial but most have a digital display. Ammeters must be connected in series to measure the current flowing through the components in the circuit. There are two ways to measure current. One is based on electromagnetism and is associated with the early moving coil meter. The other is based on Ohm's Law, the main theory of electricity.

Learn more about A circuit here:- https://brainly.com/question/2969220

#SPJ4

This information could be used in the following ways: the braking distance of a skidding car will depend on its initial speed and the coefficient of kinetic friction.

Thus, if the coefficient of friction is known the initial speed can be determined from the length of the skid marks.

What do you mean by Initial speed?

Initial speed can be described as  how fast an object travels when gravity first applies force on the object. It can be represented in the form of (u) and is generally measured in metres per second (m/s).

It can be represented in three ways.

Through these formulas we can calculate the initial speed of any object. It helps in understanding various velocities, time principles.

To know more about initial speed from the given link

https://brainly.com/question/26116359

#SPJ4

Answer:

A

Explanation:

since it did not absorb the heat then it is an insulator

The radius in terms of x is 2/(π+4)

Area, a quantity that describes the extent of an area on a plane or curved surface. The area of ​​a planar region refers to the area of ​​a shape or planar layer, while surface area refers to the area of ​​an open surface or boundary of a three-dimensional object.

Given that,

y forms a circle of radius r

y = 2πr

r = y/2π

(2-y) forms Square Side x

(2-y) = 4x

x = (2-y)/4

Now Sum of Areas = Area of Square + Area of Circle

Sum = πr² + x²

Substitute the  values of r and x in above equation:

A(y) = y²/4π + (y-2)²/ 16

To maximize Area A(y)

A'(y) = 0

2y/4π + 2(y-2)/16 = 0

y/2π + (y-2)/8 =0

y = 2π/(π+4)

For maximum sum of areas,

x = 2/π + 4

Hence, The formula for the radius r in terms of x and for the maximum areas is x=2/(π+4)

To know more about area visit:

https://brainly.com/question/11952845

#SPJ4

Gamma rays is a form of electromagnetic radiation that has photons with the highest energy.

Gamma rays are a form of electromagnetic radiation (EMR). They are the similar to X-rays, distinguished only by the fact that they are emitted from an excited nucleus.

The energy of the photon is directly proportional to the frequency, that is Ε α υ. It means that if the photon has high frequency, then the energy of that photon will be high, and if the photon has lower frequency then the energy that the photon will be less.
Here it is given to determine the radiation that has high energy, which in turn means that radiation with the highest frequency is needed to be found. Hence, from the data of electromagnetic spectrum, the radiation with the highest frequency is the gamma rays with frequencies up to 10^19 Hz.
As gamma rays have the highest frequency, gamma rays will also have the highest energy, with energy extending up to few trillion electron volts.
Hence, the radiation with the highest energy is gamma rays.

Learn more about gamma rays https://brainly.com/question/12528914

#SPJ4

The best description of inelastic and elastic collisions is perfectly inelastic.

Collisions occur when one object strikes аnother. There аre two types of collisions:

Your question is incomplete, but most probably your question was

An inelastic collision is a collision in which kinetic energy is not conserved. In a partially inelastic collision, kinetic energy is lost, but the objects colliding do not stick together. From this information, you can infer what completely inelastic and elastic collisions are.

For more information about the type of collisions refer to the link:

https://brainly.com/question/4322828

#SPJ4

The power pushing at 113 N for a distance of 9 meters. The time taken is 0.22 seconds.

Power :

Power is defined as the speed at which work is performed on an object.

work done = Force x Distance

Power = Work done/ Time

Power = (Force x Distance)/Time

Power = 226 Watt

Force = 113 N

Distance taken = 9 meters

To calculate power we use :

Power = (Force x Distance)/Time

266W = (113N x 9s)/Time

Time = 266W/(113N x 9m)

Time = 266W/(113N x 9m)

Time = 0.22 seconds

The power pushing at 113 N for a distance of 9 meters. The time taken is 0.22 seconds.

To know more about power :

https://brainly.com/question/2289248

#SPJ1

The maximum height H to which she rises above the end of the track that is slanted upward by 48° above the horizontal at its end is 1.11 m

KE = 1 / 2 m v²

PE = m g h

According to law of conservation of energy,

KE ( Initial )  + PE ( Initial ) = KE ( Final ) + PE ( Final )

h ( Initial ) = 0

v ( Initial ) = 6.9 m / s

g = 9.8 m / s²

h = 0.4 m

1 / 2 m vi² + m g hi = 1 / 2 m v² + m g h

1 / 2 m vi² = 1 / 2 m v² + m g h

vi² = v² + 2 g h

6.9² = v² + ( 2 * 9.8 * 0.4 )

v² = 47.61 - 7.84

v² = 39.77 m / s

H = vi² sin²θ / 2 g

θ = 48°

H = 39.77 * sin²48° / ( 2 * 9.8 )

H = 21.78 / 19.6

H = 1.11 m

Therefore, the maximum height H to which she rises above the end of the track is 1.11 m

The given question is incomplete. The complete question is;

The drawing shows a skateboarder moving at 6.9 m/s along a horizontal section of a track that is slanted upward by 48° above the horizontal at its end, which is 0.40 m above the ground. When she leaves the track, she follows the characteristic path of projectile motion. Ignoring friction and air resistance, find the maximum height H to which she rises above the end of the track.

To know more about projectile motion

https://brainly.com/question/11049671

#SPJ4

The coefficient of kinetic friction between the puck and surface id 0.20.

What is coefficient of kinetic friction?

Coefficient of kinetic friction is the ratio between frictional force present in the motion of two surfaces that are in contact to the normal force that presses the two surface together.

It is calculated mathematically as: μ = F/N, where

F= frictional force and N= normal force.

v2 = u2 +2as

0= 62 + 2a9

18a + 36= 0

18a = -36

a= -2

friction =  μ × normal force

or friction =ma

ma=  μN

ma=  μ(mg)

μ = a/g where g = 9.8 N

μ= -2/9.8

⇒0.20.

To know more about kinetic friction, link on the given link

https://brainly.com/question/20241845

#SPJ4

Time will it take to reach the ground is 9.3second

What is acceleration?

The velocity of an object may change due to an increase or reduction in speed or a change in direction of motion. The fall of an apple, the moon orbiting the earth, or a car stopped at a traffic light are all examples of acceleration. We can see from these examples that acceleration occurs when the direction of a moving object changes or its speed increases or decreases.

Acceleration is a vector quantity defined as the rate at which an object's velocity varies. If an object's velocity changes, it is accelerating.

If a person is moving quickly, sports announcers will occasionally state that he or she is accelerating. However, acceleration has nothing to do with speed. A person can be travelling very quickly yet not accelerating. Acceleration is the process of modifying the rate at which an object moves. If an object's velocity does not change, it is not accelerating. The data on the right indicate an accelerating object travelling northward. The velocity of the object changes throughout time.

We are using second equation of motion

s= ut+1/2[tex]t^{2}[/tex]

300=-15T +1/2*(10)[tex]T^{2}[/tex]

t = 9.3 second

Time will it take to reach the ground is 9.3second

Learn more about acceleration from given link

https://brainly.com/question/460763

#SPJ1

Answer:

Below

Explanation:

The accelerateinon, a, of the watermelon is just the acceleration of gravity on Earth = 9.81 m/s^2

the height will be found by

Height = 1/2 a t^2 = 1/2 (9.81)(3.50)^2 = 60.1 m

A. The amount of heat energy the heater supply is 42000 J

B. The temperature rise of the water is 5 °C

A. How do I determine the energy supplied by the heater?

We can determine the heat energy supplied by the heater as illustrated below:

Electrical power = Electrical eneryg / time

210 = Energy / 200

Cross multiply

Energy = 210 × 200

Energy = 42000 J

Thus, the energy supplied is 42000 J

B. How do I determine the temperature rise?

The temperature rise of the water can be obtained as follow:

Q = MCΔT

42000 = 2 × 4184 × ΔT

42000 = 8368 × ΔT

Divide both sides by 8368

ΔT = 42000 / 8368

ΔT = 5 °C

Thus, the temperature rise is 5 °C

Learn more about energy and temperature:

https://brainly.com/question/22790971

https://brainly.com/question/17107322

#SPJ1

The number of turns the winding have in an air-filled toroidal solenoid that has a mean radius of 15.0cm and a cross-sectional area of 5.00cm2 is 2745 turns

According to Ampere's law,

B = μo N I / 2 π r

Φ[tex]_{B}[/tex] = B A

Φ[tex]_{B}[/tex] = μo N I A / 2 π r

B = Magnetic field

μo = Absolute permeability of free space

N = Number of turns

I = Current

r = Radial distance

A = Cross sectional area

U = Energy stored

U = 1 / 2 L I²

L = 2 U / I²

L = N Φ[tex]_{B}[/tex] / I

μo = 4 π * [tex]10^{-7}[/tex] H / m

U = 0.39 J

r = 15 cm = 0.15 m

I = 12.5 A

A = 5 cm² = 5 * [tex]10^{-4}[/tex] m²

Equating,

2 U / I² = N Φ[tex]_{B}[/tex] / I

2 U / I² = μo N² I A / 2 π r I

4 π r U / μo I² A = N²

N² = ( 4 * 3.14 * 0.15 * 0.39 ) / ( 4 * 3.14 * [tex]10^{-7}[/tex] * 12.5² * 5 * [tex]10^{-4}[/tex] )

N² = 0.74 / 9812.5 * [tex]10^{-11}[/tex]

N² = 7.54 * [tex]10^{6}[/tex]

N = 2.745 * 10³

N = 2745 turns

Therefore, the number of turns the winding have are 2745 turns

To know more about Ampere's law

https://brainly.com/question/1476646

#SPJ4

The parallax angle for the star Hadar is 0.010 arcseconds. 100 PC far away is Hadar.

Parallax angle is a displacement or distinction in the apparent function of an item considered alongside two one-of-a-kind lines of sight and is measured by the attitude or semi-perspective of inclination among those two lines. because of foreshortening, close-by objects display a bigger parallax than farther items when found from distinct positions, so parallax may be used to determine distances.  

To a degree of big distances, including the gap between a planet or a star from Earth, astronomers use the precept of parallax. right here, the term parallax is the semi-perspective of inclination between sightlines to the megastar, as observed while Earth is on contrary sides of the solar in its orbit. those distances shape the lowest rung of what's called "the cosmic distance ladder", the first in a succession of methods by which astronomers determine the distances to celestial items, serving as a basis for other distance measurements in astronomy forming the higher rungs of the ladder.

To learn more about parallax angles visit here:

brainly.com/question/20296211

#SPJ4

Answer: A 0.065 METER   0.1025 METER   0.215 METER

B 0.001432 meter^3

C 1955.307 kg/m^3

Explanation:

Celsius does not measure at an absolute temperature , hence  increasing temperature from 3°C to 6°C does not double temperature. In Charles law.

Heat or bloodless is measured in terms of temperature. It demonstrates how warmth electricity certainly flows from a warmer body to a cooler body and may be expressed in phrases of any range of arbitrary scales (one at a decrease temperature).

A match is burning at a far greater temperature than an iceberg, yet an iceberg has a considerably better total warmth electricity than a in shape. Temperature isn't always similar to the electricity of a thermodynamic system.

Temperature, along side strain, density, and different like qualities, is known as an excessive belongings as opposed to vast functions, together with mass or extent—one this is independent of the quantity of stuff being addressed.

To know more about  temperatures  visit : https://brainly.com/question/14643865

#SPJ9

Each constituent of the Milankovitch cycles as pertaining to orbital eccentricity, axial tilt, or axial precession are classified accordingly.

The constituents of the Milankovitch cycles as pertaining to orbital eccentricity are:

The constituents of the Milankovitch cycles as pertaining to axial tilt are:

The constituents of the Milankovitch cycles as pertaining to axial precession are:

Therefore, each constituent of the Milankovitch cycles as pertaining to orbital eccentricity, axial tilt, or axial precession are classified accordingly.

To know more about Milankovitch cycles

https://brainly.com/question/3269243

#SPJ4

1276.9 m/s² is the angular acceleration of  0.900 m, he is able to rotate the ball only 5.99 rev/s.

v=33.9m/s

r=0.9 m

a=v²/r

a=1149.21/0.9

a=1276.9 m/s²

The rate at which the angular velocity in a circular motion varies over time is known as the angular acceleration. Rotational acceleration is another name for it. Given that it has both a magnitude and a direction, it is a vector quantity. Angular acceleration is represented by the letter alpha.

Variable velocity is what causes the acceleration. The phrase "angular acceleration" is used to describe variations in rotational speed in spinning objects. According to the connection, the angular displacement of a spinning object depends on time t. Every time a body rotates, it experiences angular acceleration. A quantitative vector can be used to express the change in angular velocity per unit of time.

To know more about   angular acceleration visit : brainly.com/question/14769426

#SPJ4

The planet that is likely to have a large iron core if all three planets have similar rocky surfaces but different average densities is 6000 kg / m³

Density is directly proportional to he size of iron core. Larger the density of the planet larger will be the size of iron core of the planet. Smaller the density of the planet smaller will be the size of iron core of the planet.

Average density of a planet is the value of total mass divided by the total volume. If the average density of a planet is higher than 3000 kg / m³, the planet is terrestrial. If the average density of a planet is lesser than 2000 kg / m³, the planet is Jovian.

Therefore, the planet that is likely to have a large iron core if the planet with 6000 kg / m³

To know more about Average density of a planet

https://brainly.com/question/6783275

#SPJ4

Patients ought to meet physical and psychological standards to make sure that they may be candidates for coronary heart transplantation.

The Recipient affected person has to be referred to the transplant center with an irreversible and in any other case fatal disease ensuing in organ failure, whilst still being otherwise wholesome enough to live to tell the tale and gain from an organ transplant and to comply with a lifestyles-long medication routine.

Physical criteria indications for transplant in continual heart failure include sufferers who've disabling signs regardless of most fulfilling medical control or refractory arrhythmias no matter scientific and electrophysiological methods.

The doctor will make an incision on your chest. Your health care professional will separate your chest bone and open your rib cage in order that he or she will perform for your coronary heart. Your medical professional then removes the diseased heart and sews the donor heart into place. she or he then attaches the important blood vessels to the donor's coronary heart.

Learn more about physical criteria here:-https://brainly.com/question/28116056

#SPJ4

Using Newton's method , the approximations value of x₁ and X₂ are 7.1 and 7.0 respectively.

Newton's method: Newton’s method is a procedure for approximating the solutions of an equation f(x) =0. These are also called the zeros of f. Newton’s method is an iterative procedure that finds an approximation to a rootof f(x) =0 and then uses the approximation to help find a better approximation. This gives a list of numbers x1, x2, x3, . . . which we call successive approximations. We begin by explaining the main step of method with shows us how to find xn+1 from xn.

Given an approximation xn, compute the next approximation by xₙ+1 = xₙ− f(xₙ)/f'(xₙ).•

We have given that,

f(x) = x²−2x−35, and x₀= 6

approximation relation for succive approximation

is xₙ + 1 = xₙ − (xₙ2 - 2xₙ- 35) / 2xₙ− 2

Now , we compute the values of x1 and X2 using approximation relation

put n= 0 , in above formula we get

X₁ = x₀- ( x₀²- 2x₀ - 35)/2x₀ -2

using initial condition, x₁ = 6 - ( 36-12-35)/10 = 7.1

again put, n= 1

x₂ = x₁ - ( x₁ ² - 2x₁ -35)/2x₁ -2 = 7.1 - ((7.1)² - 14.2 -35)/12.2 = 7.00

Hence, the value of first succive approximation (x₁) is 7.1 and second approximation (x₂) is 7.00

To learn more about Newton's method , refer:

https://brainly.com/question/17031314

#SPJ4

Complete Question:

Write the formula for Newton's method and use the given initial approximation to compute the approximations x1 and x2.

f(x)=x2−2x−35, x0 =6

Write the formula for Newton's method for the given function. Choose the correct answer below.

xn+1=xn−(xn2−2xn−35 )/ 2xn−2

Use the given initial approximation to compute the approximations x1 and x2.

At point A the spinning wheel will experience least centripetal force.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Centripetal force is applied on object depends on the centre and object distance. So B will experience maximum force while A is least.

At point A the spinning wheel will experience least centripetal force.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ1

Following cooling, a white dwarf becomes too cold and dark to emit visible light.

Like our Sun, medium-mass stars generate helium by fusing hydrogen within their cores. Our Sun is now performing this. An outward pressure results from the heat the Sun produces during the nuclear fusion of hydrogen into helium. The Sun will run out of hydrogen in its core in about 5 billion years.

The Sun begins to collapse when it runs out of hydrogen to fuse, tipping the scales in favor of gravity. However, compacting a star makes it heat up once more, allowing it to fuse what little hydrogen is left in a shell surrounding its core.

We can learn about the age of the universe from white dwarfs. Our galaxy and the age of the universe would be lowered if we could calculate how long it takes for a white dwarf to cool into a black dwarf.

For more information on white dwarf kindly visit to

brainly.com/question/19602278

#SPJ1

Answer:Simple, it gets used up by the phone.

Explanation:Your phone uses the energy stored in the battery to perform the functions it does. Chemical energy gets converted to light (display), sound (speakers), electrical (internal processing of the phone), thermal (phone getting heated up), and to other forms.

Answer:

The temperature of the early solar system explains why the inner planets are rocky and the outer ones are gaseous.

Explanation:

The outer planets are much larger than the inner planets. Because of their large mass and cooler temperature, they have a very different composition; they are mostly made of light elements with extended atmospheres in a gaseous form. Outer planets exist in much bigger systems than inner planets.

The reason for different composition of planets has to do with how the solar system formed. In the early solar system, there was a disk of material rotating around the Sun, from which the planets eventually formed. However, to form planets required some kind of initial clump in the protoplanetary disk. These clumps were probably formed from collisions of solid particles. Different elements become solid at different temperatures: the most common elements, hydrogen and helium, never became solid, but hydrogen compounds (like water) can solidify at colder temperatures, like those in the outer solar system. In the inner solar system, it was too hot for these compounds to solidify; only rocks and metals can solidify at these temperatures. Hence, only small planetesimals formed in the inner solar system.

Reaction time is the skill that mostly helps candace respond as the puck flies in her direction

Reaction time (RT) is a measure of the quickness with which a person responds to some sort of stimulus. It is defined as the interval of time between the stimulus and  voluntary response in the subject.

Her reaction time is really quick , She reacts quickly to the different areas that the puck is going and is able to go across the crease to stop it

To learn more about reaction time here :

https://brainly.com/question/13693578

#SPJ4

To know the exact mass of a planet, we also need to be able to determine the angle at which the planet's orbit is tilted toward us.

To determine the mass of a planet, astronomers usually measure the small motions of the star caused by the gravitational pull of the orbiting planet. For a planet, figuring out the mass of the Earth is an extraordinary challenge with current technology.

Therefore, to measure the mass of a planet, measure the period and orbital radius of all satellites orbiting the planet, plot graph against R³/T² for all satellites, and calculate the mass of the planet. This is one way to do that.

According to Kepler's laws: If the orbital size (a) is expressed in astronomical units (1 AU is the average distance between the Earth and the Sun) and the period (P) is measured in years, Kepler's third law states that his P² = a³ increase. where P is the Earth year, a is the AU, and M is the mass of the central body in units of the mass of the Sun.

To know more about Kepler's laws visit:

https://brainly.com/question/28192903

#SPJ4

Divided by the amount of time passed, the average speed is obtained. The limit of average velocity as elapsed time approaches zero is the instantaneous velocity of an object. v (t) = d d t x (t). v (t) = d d t x (t).

The average velocity rate of change is a measure of how much one variable has changed overall relative to another. The instantaneous rate of change, also known as the derivative, quantifies the precise rate at which one variable changes in relation to a precise, extremely small change in another variable.Average speed is the ratio of an object's total distance travelled to its total travel time. Average acceleration is calculated by dividing the change in velocity by the amount of time that has passed; instantaneous acceleration is the acceleration at a specific time. Average acceleration is the acceleration at a specific moment in time; instantaneous acceleration is the velocity change divided by the amount of time that has passed. As a result, only when the body is moving at a constant speed can instantaneous speed and average speed be equal. Instantaneous speed and instantaneous velocity have the same magnitude.

Learn more about  average velocity here:

https://brainly.com/question/862972

#SPJ4

Answer:

Below

Explanation:

"echo location"

The sound travels the distance, d , to the food and back for a total distance of  2d

2d =   1530 m/s * .13 s

d = ~ 99 m away

Consider two satellites s1 and s2 in circular orbits with periods of 8 hours and 16 hours . satellites will be 80129 m and  130829 m high above the earth's surface

h1 = [tex]{(GM(e) * T^{2} / 4 pi^{2} )}^{1/3}[/tex] - R(e)

  = ( 6.67 * [tex]10^{-11}[/tex] * 5.97 * [tex]10^{24}[/tex] * [tex]8^{2}[/tex] / 4 * [tex]3.14^{2}[/tex]) - 6371

  = 80129 m

h2 = (6.67 * [tex]10^{-11}[/tex] * 5.97 * [tex]10^{24}[/tex] * [tex]16^{2}[/tex] / 4 * [tex]3.14^{2}[/tex]) - 6371

  = 130829 m

satellites will be 80129 m and  130829 m high above the earth's surface

To learn more about satellite here :

https://brainly.com/question/9266911

#SPJ4