the theory that dark matter is not real and is just a a problem with our theory of gravity has been falsified by

Answers

Answer 1

The findings of Fritz Zwicky and Jan Oort suggest the motion of neighboring stars in our galaxy and galaxies in the Coma cluster do not follow Newton's law of gravity.

Exists dark matter in reality?

In fact, the gravitational pull that dark matter appears to have on visible stuff is the only way that researchers have been able to deduce its existence. Dark matter, which makes up about 27% of the cosmos, appears to outnumber visible matter by a factor of nearly six to one.

Do dark matter and gravity interact?

Given the rates at which astronomers observe the galaxies revolving, the prevailing view among cosmologists holds that dark matter permeates nearly every galaxy and provides the extra gravity that prevents stars from swirling out into space.

Learn more about gravity here:

https://brainly.com/question/2888262

#SPJ4


Related Questions

What happens when the pressure of a gas over solvent increases?
A.Less gas will dissolve in the solvent.
B. Less solvent will escape as a gas.
C. More solvent will escape as a gas.
D. More gas will dissolve in the solvent.

Answers

Answer:

D

Explanation:

More pressure pushes more gas into the solvent

   think about the opposite when you open a soda and decrease the pressure....the gas comes out of solution....

5 benefits of muscular strength training

Answers

Answer:

1/ Better Health

2/ Reduce injury posibility

3/ Increase energy level when exercising

4/ Bigger muscle

5/ Prevent disease

Explanation: The training helps you get the five benefits above. There is more benefit, but I think the five above are the most important!

sound components are identified as coming from the same sound source. this means that the components are

Answers

Sound components are identified as coming from the same sound source. this means that the components are generated by the same physical object or process, and they tend to have similar characteristics such as frequency, timbre, and intensity.

What is Sound components about?

 These components are usually perceived as being part of a single sound or voice, rather than being perceived as separate sounds.

For example, if you are listening to a person speaking, the different sound components that make up their voice, such as their pitch, vowel sounds, and consonant sounds, are all generated by the same source (the person's vocal cords and mouth).

In some cases, sound components can be isolated and analyzed individually. For example, in audio engineering or music production, in order to shape the overall sound of a recording or performance.

Additionally, sound components can be synthesized or manipulated using digital audio software, allowing for the creation of new sounds or the modification of existing ones.

Learn more about Sound from

https://brainly.com/question/29667803
#SPJ1

the milky way galaxy is approximately 100,000 light-years across while the solar system is 1.9 light-years across. what is the scale ratio of the size of the solar system to the galaxy?

Answers

The Galaxy Milky Way is 100 million times bigger than the solar planetary System. Hence, on a 1-to-10 billion scale, The Galaxy Milky Way is about 100,000 light-years across while the solar system is 1.9 light-years across.

The Solar Planetary System is a system that is gravitationally bound. It includes the Sun and the planets that orbit it directly or indirectly. The biggest of the objects that orbit the Sun directly are the 8 planets, with the dwarf planets and small Solar System bodies making up the most. Natural satellites orbit the Sun indirectly. Since it lacks a definite limit, determining the extent of the Solar planetary System is difficult. The size of the solar system is [tex]10^{10}[/tex]  km.

A galaxy is a gravitationally bound set of stars, dust, and hydrogen. Galaxies can be seen all over the world, and their sizes differ tremendously. Supermassive black holes are believed to exist at the cores of almost all large galaxies. Lenticular galaxies, irregular galaxies, Spiral galaxies, and elliptical galaxies are the four primary groups of galaxies. The size of a galaxy is [tex]10^{18}[/tex]  km.

The result obtained by comparing Milky Way's size to the Solar planetary System is, the Galaxy Milky Way is 100 million times bigger than the solar planetary System.

It is calculated by:

Size of a galaxy= 1,000,000,000,000,000,000 ([tex]10^{18}[/tex] ) km

Solar planetary system’s Size = 10,000,000,000 ([tex]10^{10}[/tex] ) km

Thus,

([tex]10^{18}[/tex] km / [tex]10^{10}[/tex] km) = [tex]10^{8}[/tex]

Hence,

           The Galaxy Milky Way is 100 million times bigger than the solar planetary System. Hence, on a 1-to-10 billion scale, The Galaxy Milky Way is about 100,000 light-years across while the solar system is 1.9 light-years across.

Learn more about Solar System here

https://brainly.com/question/1286910

#SPJ4

Repond to the following baed on your reading. Compare and contrat the characteritic of metal and nonmetal. Decribe the electrochemical erie and why it’ important in undertanding metal. Decribe the theory of ionization in regard to acid and bae. Identify the role of indicator

Answers

The claim that metals are superior to non-metals in terms of heat and electrical conductivity is true.

What does the term "electrochemical" mean?

Electrochemistry is the study of chemical processes that move electrons. It deals with the interactions between electromagnetic oil and power transformation. Example: The investigation of electrochemical cells is a part of electrochemistry. It involves cells that convert energy into electrical energy.

What use does electrochemistry serve?

Electrochemistry has many common applications in daily life. All sorts are batteries, among them those that power lamps, calculators, and automobiles, primarily generate electricity through biochemical reactions. Plating objects with decorative metals like gold or chromium requires electricity.

To know more about Electrochemical visit:

https://brainly.com/question/12034258

#SPJ4

suppose a planisphere star rises at 8pm (pst) tonight. what time did that same star rise one month ago? g

Answers

The vertical impulse by the lift force during this time is 4.15 by minutes for Newton second.

We have a demon That there is a force of 52 down cause of 15. Right? This is what we have you in the questions and acting on the bill. Be both masked by Graham of Mars five g. No. In the meantime. And travelers given that the time and develop acting on this fourth, you should humanists. But we need to find the impulse England's. They seem to not advise you actually. This is what we need to find. So we know that false change in momentum much time. So basically impulses change momentum, but you find impulses changing moment also jay so G is false in campaign so we can put forth here. The forces to do time 59 1 dime. That's Spanish for -5. This was with 15 to 10 days to four minutes, five Newton and two times three seconds Volunteers. They will get 15 into 10 days to the R -4. 15 10 by minus for Newton's second.

To know more about vertical impulse click-

https://brainly.com/question/26152956

#SPJ1

7) Calculate the KE. of a a) 2 kg trolley travelling at 1.5 m/s,​

Answers

Answer:

Explanation:

KE=mv(v)/2

KE=2(1.5)(1,5)/2

KE=2.25

Important Formulas:

[tex]KE=.5mv^2[/tex]

__________________________________________________________

[tex]m=2kg[/tex] (measured in kg)

[tex]v=1.5m/s[/tex] (measured in meter per second)

[tex]KE=?[/tex] (measured in joules)

__________________________________________________________

[tex]KE=.5(2)(1.5)^2[/tex]

[tex]\fbox{KE = 2.25J}[/tex]

an electron is accelerated toward a target. find the minimum accelerating potential difference (magnitude) that would

Answers

The minimum accelerating potential difference (magnitude) that would be required will be 62 kV.

Can electrons be accelerated?

Charged particles, such protons or electrons, are accelerated by particle accelerators to almost the speed of light. They then strike a target or additional particles with those fragments. According to Albert Einstein's special theory of relativity, the relativity of time prevents electrons from going faster than the speed of light when deciding whether they can do so.

How to solve the given question?

Given, wavelength (λ) = 0.0220 nm = 0.22×10∧-10 m = 0.22 A°

λ = hc/eV

V = 12400/λ

V = 12400/0.22

V = 62000 V

V = 62 kV

The minimum accelerating potential difference (magnitude) that would be required to produce kV will be 62 kV.

To know more about electrons visit

brainly.com/question/1255220

#SPJ4

The complete question is,

An electron is accelerated toward a target. Find the minimum accelerating potential difference (magnitude) that would be required to produce kV. Assume the electron is initially at rest before accelerating toward the target.) wavelength of 0.0220 nm when the electron strikes the target. (Enter your answer in an x-ray with a kV.

the axis on which earth now rotates is tilted at an angle. if the axis was to be changed so that it was perfectly upright, which change would be expected on earth?

Answers

There wouldn't be any light and dark phases if the axis were adjusted so that it was absolutely upright. Since winter will usually prevail in the Southern Hemisphere, this alteration would not be unexpected on Earth.

What is an angle?

In planar geometry, an angle is a shape made up of two rays or lines that share an endpoint. The common terminal of two rays is known as the vertex, and the two rays are referred to as sides of an angle. The Latin word "angulus," which means "corner," is the basis of the English name "angle." In Euclidean geometry, an angle is a shape composed of two rays, referred to as the angle's sides and vertices, respectively, and having a common terminus. Two rays can form angles in the plane where they are positioned.

What is the measure of an angle ?

One can measure and calculate angles in terms of degrees with a protractor. The black arrow in the figure below, for instance, uses a protractor to point to 100°, crossing 90°. Consequently, the angle has a size of 100°.

To know more about Angle visit:

https://brainly.com/question/22819767

#SPJ4

objects such as the great nebula in andromeda were once called extragalactic nebulae. it is now realized that they are actually

Answers

Objects such as the great nebula in andromeda were once called extragalactic nebulae. it is now realized that other galaxies much like our own.

What is nebula?

A nebula is a distinctively luminous region of the interstellar medium, which may be made up of cosmic dust, neutral, neutrally ionised, or molecular hydrogen. Nebulae are frequently areas where stars are being formed, as seen in the Eagle Nebula's "Pillars of Creation."

The gas, dust, and other material formations in these areas "clump" together to form denser regions, which draw in more matter and finally reach a density where stars can form. Planets and other planetary system objects are then supposed to be formed from the leftover material.

Learn more about nebula here:

https://brainly.com/question/9497068

#SPJ1

ou know the stall torque and no-load speed of a pm dc motor, what is the maximum power the motor can deliver?

Answers

If we know the stall torque and no load speed of a pm dc motor, the maximum power motor can deliver is P max = 1/2* Tstall * 1/2* ω(no load).

A mechanical device that produces stall torque has an output rotational speed of zero. Electric motors are capable of developing torque when stalled.

However, as the current flowing is at its maximum while an electric motor is halted, they are vulnerable to overheating and potential damage.

The no load speed is the speed when running at nominal voltage and zero load.

So, the maximum power motor can deliver is P max = 1/2* Tstall * 1/2* ω(no load).

To know more about power:

https://brainly.com/question/28528630

#SPJ4

. One end of a uniform wire of length Land of weight Wis attached rigidly to a point in the roof and a weight Wis suspended form its lower end. If 'S' is the area of cross- section of the wire, then find the stress in the wire at height (3L/4) from its lower end ? 1) 3) w₁ +(3w/4) 1 S W₁ + W 4 2) 4) w+(3w₁/4) S 3w₁ + (w/4) S​

Answers

To find the stress in the wire at a height of 3L/4 from its lower end, we need to calculate the force acting on the wire at that point. The force on the wire is equal to the weight of the wire itself and the weight of the object suspended from it. Therefore, non of the option is correct.

How is Stress calculated?

The weight of the wire is given by the equation: W = gL, where g is the acceleration due to gravity and L is the length of the wire.

The weight of the object suspended from the wire is given by the equation: W1 = gL1, where L1 is the distance from the point of attachment to the object.

Therefore, the total force acting on the wire at a height of 3L/4 from its lower end is:

F = W + W1 = gL + g(L - 3L/4) = gL + 3gL/4 - 3gL/4 = gL

The stress in the wire is given by the equation: stress = F/S, where S is the cross-sectional area of the wire.

Substituting the values for F and S, we get:

stress = (gL)/S

Therefore, the stress in the wire at a height of 3L/4 from its lower end is (gL)/S.

None of the given options match this result, so the correct answer is not among the choices provided.

Learn more about stress here: https://brainly.com/question/154477

#SPJ1

does the pivot point (i.e., the triangle in the diagram upon which the ruler balances) exert a force on the ruler? does it exert a nonzero torque about the pivot?

Answers

Yes, the pivot point (i.e., the triangle in the diagram upon which the ruler balances) exert a force on the ruler. No, it does not exert a nonzero torque about the pivot.

What is meant by a pivot point?

Pivot point is that point where an object rotates around. Sometimes, it is called the fulcrum or rotational axis.

A lever has a rigid bar that is able to pivot at one point and this point of rotation is known as the fulcrum. Force is applied at some point away from the fulcrum.

Torque is a measure of how much force acting on the object causes that object to rotate. The object rotates about an axis, which is called as the pivot point.

To know more about pivot point, refer

https://brainly.com/question/14516358

#SPJ4

calculate the refractive index of an optical medium if light travels inside the medium at 2.5 x 10^8 m/s inside the medium.

Answers

If light moves through an optical medium at a speed of 2.5 x 108 m/s, the media's refractive index is 1.2.

The material's refractive index (n) may be defined as -

Refractive Index (n) = Light's speed in a vacuum (C) divided by its light speed in a medium (V)

Therefore, n = C/V  

Given that the speed of light in the medium is V=2.5×10⁻⁸m/s

and the speed of light in the vacuum is C=3.0×10⁻⁸m/s

Therefore, the equation gives us n = C/V

n=3.0×10⁻⁸m/s÷2.5×10⁻⁸m/s,

which equals n=1.2 (Refractive index of the medium).

Refractive index: The refractive index, sometimes called the refraction index in optics, is a dimensionless quantity that describes how efficiently an optical material bends light.

Light: light is the organic substance that activates vision and makes things visible

To know more about vacuum visit this:

https://brainly.com/question/29242274

#SPJ4

the diagram below shows a segment of DNA before and after erplication, which of the following could have occured as a result of this change in structure?

Answers

The change or mutation in a segment of DNA after replication may lead to changes in the genotype, the traits of the organism and the proteins (option i, ii and iii).

What is a genetic mutation?

A genetic mutation is any change in the nucleotide bases of the genome of an organism that may be associated with modifications in the phenotypic traits or features of the organism if this change alters the expression of a given gene that produces a particular protein.

Mutations may be neutral when they don't show an apparent effect on the phenotype of an organism such as occur in mutations located in intergenic regions.

Therefore, with this data, we can see that a genetic mutation may alter the proteins produced by an organism which has a direct effect on the phenotype by altering the structures that it is able to synthesize.

Learn more about genetic mutations here:

https://brainly.com/question/29000870

#SPJ1

A horse pulls on a carriage. By newton's third law, the carriage pulls back on the horse with equal force. Why do the action and reaction forces just described not balance each other out?.

Answers

The reason behind action and reaction forces not balance each other out is d)because the action force acts on the carriage, while the reaction force acts on the horse. So, correct option is d.

Forces generally act two by two, which are known as activity and response forces.

The activity force is the power applied to an article by the first activity, and the response force is an equivalent power applied by the item the other way.

A power that is applied to an item is alluded to as an activity force. A response force is the consequence of an inverse heading activity force.

Newton's third law of motion tends to these two forces, alluded to as activity and response powers.

The depicted activity and response powers don't adjust each other out in light of the fact that the activity force follows up on the carriage and the response force follows up on the pony.

Hence, correct option is d.

To know more about action and reaction forces, visit here:

brainly.com/question/13186730

#SPJ4

(Complete question) is:

A horse pulls on a carriage. By Newton's third law, the carriage pulls back on the horse with equal force. Why do the action and reaction forces just described not balance each other out?

A.

because this is not an action--reaction pair

B.

because action and reaction forces are not equal in magnitude in this case

C.

because action and reaction forces act in the same direction in this case

D.

because the action force acts on the carriage, while the reaction force acts on the horse

what type of observation can astronomers use to measure the composition of extrasolar planet atmospheres?

Answers

The type of observation that astronomers can use to measure the composition of extrasolar planet atmospheres : comparisons of a star's spectrum when planet is in transit versus when it is eclipsed.

What are extrasolar planets?

Several planets outside the Solar System called exoplanets have been observed to have atmospheres. At the present , most atmosphere detections are of hot Jupiter or Neptune that orbit very close to their star and therefore have heated and extended atmospheres.

As a transiting extrasolar planet passes in front of its host star, one can observe the exoplanet's atmosphere as it is backlit by the star. Additional atmospheric observations can also be made by watching as exoplanet disappears and reappears from behind the star.

To know more about extrasolar planets, refer

https://brainly.com/question/14018668

#SPJ4

what is the current in a circuit if the voltage applied to a load is 492 volts? the connected load contains two series-connected resistive heating elements that are each rated for 2.8 kw at 250 volts.

Answers

The current in a circuit if the voltage applied to a load is 492 volts is 5.52 A.

Current is the rate of flow of electric charge around an electrical circuit. It is measured in amperes (A). Current can be calculated by dividing the voltage (V) by the resistance (R) of a circuit, according to the formula I = V/R.

Calculate the total resistance of the two series-connected resistive heating elements:

R = (250 V) / (2.8 kW) = 89.29 Ω

Calculate the current in the circuit using Ohm's Law:

I = (V) / (R) = (492 V) / (89.29 Ω) = 5.52 A

For more questions like Current click the link below:

https://brainly.com/question/27499791

#SPJ4

A large, moving truck crashes into a small parked car. How do the magnitudes of the impulses and theforces on each vehicle compare during the collision?
A. The truck experiences less force and less impulse.
B. The truck experiences equal force and equal impulse.
C. The truck experiences less force but more impulse.
D. The truck experiences more force but less impulse.

Answers

A large, moving truck crashes into a small parked car. How do the magnitudes of the impulses and the forces on each vehicle compare during the collision: A The truck receives more force but less impulse.

In physics, value is defined really as “distance or amount.” It depicts absolutely the relative course or length wherein an item actions within the experience of movement. it's far used to specify the scale or scope of something. In physics, value commonly refers to distance or quantity.

Magnitudes are the scale of something. for example, in the case of speed, a vehicle is moving faster than a bike. in this instance, the importance of the speed of the auto is higher than that of the bike. It tells the route or size that is absolute or relative in which an item travels in the experience of motion.

Learn more about Magnitudes here:

https://brainly.com/question/24256733

#SPJ4

Why is the milky way galaxy not expanding together with the rest of the universe?.

Answers

gravitationally bound to each other

What happens to the ball when you put a backspin on the ball and the opponent hits it forward with a neutral or flat angle? -A. It returns with a topspin
B. It goes into the net
Or c:It flies high to the back of the table.

Answers

Answer: tbh I think it’s C I did research and says similar about it

Explanation:

when a tandem axle truck is equipped with a 6s/4m split configuration, how are the brakes on the drive axles modulated during abs braking?

Answers

Each of the vehicle's six wheels would have a wheel speed sensor, but there would only be four modulators in the six-in/four-out system.

What does an ABS brake do?

Anti-lock braking systems (ABS) help you manoeuvre in an emergency by restoring traction to your tyres. What It Does: Assists in stopping wheel locking so that the driver may steer to safety. What It Isn't Able To Do The stopping distance might not be lowered, and it's okay if the pedal wobbles or pushes back.

Does ABS affect braking and its disadvantages?

By keeping the brakes from locking, ABS gives the driver better steering control while braking. ABS rarely activates, unless you reside in a state with lots of snow and ice. It groans and rattles when it does. Many motorists claim that they feel as though their brakes had failed.

The main drawback of ABS brakes is the additional expense that it adds to the base price of a vehicle. Additionally, maintenance expenses increase since each wheel's pricey sensors might be expensive to replace if they become out of calibration. Anti-lock brakes' primary function is to offer sure-footed braking.

To know more about ABS visit:

https://brainly.com/question/8555918

#SPJ4

consider a long straight 1.70-amp current. what is the magnetic field strength, in microteslas, at a distance of 15.0 cm from the current?

Answers

At a distance of 15 cm, the magnetic field strength (measured in microteslas) is 0.68 T.

What is magnetic field?

A magnetic field, a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials.  The magnetic field is the area in which a magnet produces its magnetic effects. We use the magnetic field as a tool to describe how the magnetic force is distributed in the vicinity and inside something magnetic in nature.

What causes a magnetic field and where it is find?

Magnetism is created by moving electric charges. The tiniest units of matter are known as atoms. Each atom contains charged particles called electrons. The nucleus, or core, of an atom is made up of electrons that spin like tops.

The Earth's magnetic field (and surface magnetic field) has two poles, one close to the planet's geographic north pole (see Magnetic North Pole) and the other close to its geographic south pole. Together, these poles resemble a magnetic dipole (see Magnetic South Pole).

Briefing:

Formula to calculate magnetic field around a wire:

B=(μ_° I)/2πd

B = The strength of magnetic field (Tesla)

μ₀ = permeability of free space = 4π × 10⁻⁷ T/mA

I = the current (Ampere)

π = 3.14

d = distance from the wire (m)

Given

I = 1.70 A

D=15.0 cm

B=(μ_° I)/2πd

B=(4π × 10⁻⁷×1.70)/2πd

B=(2 × 10⁻⁷×1.70)/d

B=(3.4× 10⁻⁷)/15

B=0.68×〖10〗^(-6)

B=0.68μT

To know more about Magnetic Field visit:

https://brainly.com/question/23096032

#SPJ4

in diamond, by how much, in degrees, do the critical angles for total internal reflection differ for red light compared to violet light?

Answers

The critical angles for red and violet light through diamond are 24.5° and 24.0°, respectively.

What is a critical angle, exactly?

The incidence on incidence at which the refraction angles equals 90 degrees is known as that of the critical angle. The polarization di incident light and the light beam bends in the direction of normal when it enters a thicker environment from a similarly rarer medium.

An illustration of a critical angle.

The critical angle is the angle of impact that provides a 90-degree angle of refraction. Keep in mind that an angle of impact value is how the angle of inclination is defined. For water-air borders and crown glass-water borders, the angle of inclination would be 48.6 degrees and 61.0 degrees, respectively.

To know more about critical angles visit:

https://brainly.com/question/24796244

#SPJ4

one important way astronomers can learn in some detail about what happens when galaxies collide is

Answers

One important way astronomers can learn in some detail about what happens when galaxies collide is to simulate galaxy collisions on a large computer and watch what the simulation predicts.

Simulating galaxy collisions on a large computer allows astronomers to observe how galaxies interact and evolve when they collide.

What can astronomers observe when galaxies collide?

They can observe how stars, dust, and gas interact, how the shape of the galaxies change, how the distribution of stars changes, and how the total mass of the galaxies is affected.

They can also observe how the collision affects the gas and dust, and how they form new stars, as well as how subsequent collisions can cause the galaxies to merge completely. Simulations provide a powerful tool to gain insight into the complexities of galaxy collisions and to understand how galaxies form, evolve, and interact.

Learn more about the galaxies collide:

https://brainly.com/question/25123335

#SPJ4

Radio waves travel at a speed of 300,000,000 m/s. WFNX broadcasts radio waves at a frequency of 101,700,000 Hz. What is the wavelength of WFNX’z radio waves?

Answers

The wavelength of WFNX’s radio waves with the given speed and frequency is 2.95m.

What is wavelentgh?

Wavelength can be defined as the distance between two successive crests or throughs of a wave.

The wavelength of WFNX’s radio waves with the given speed and frequency is 2.95m.

Given data in the question;

Speed of wave; c= 3×10^8

Frequency of wave; 1.017×10^8

wavelength; ?

To determine the wavelength of the radio wave, we use the expression for the relations between wavelength, frequency and speed.

C\f

Where  is wavelength, f is frequency and c is the speed.

We substitute our given values into the equation

=2.95

Therefore, the wavelength of WFNX’s radio waves with the given speed and frequency is 2.95m.

To know more about wavelentgh click-

https://brainly.com/question/10750459

#SPJ1

( this is science but there’s no subject for that so ) Q: Was there work done? Describe the energy in the situation as well.
2. Answer the questions for this block.
3. Answer the questions for this block

Answers

The work done by force is negative in the first scenario because the force and displacement are acting in the opposing directions. As the force and displacement are perpendicular in the second condition, there is no work done.

What exactly is a physics "work done"?

The product of a force's component acting in the displacement's vector and its magnitude is known as the work done by the force. Formula. The following formula may be used to calculate work by multiplying force and distance in the direction of the force. Unit: W = F d.

What exactly is a work example?

The following situations include work: relocating a table. a door is pulled and pushed. Walking. raising a stone.

To know more about work done visit:

https://brainly.com/question/16976412

#SPJ1

A vehicle travels at constant speed of 6.0 m/s around a horizontal circular curve with a radius of 24
meters. The mass of the vehicle is 4400 kg. An icy patch is located at P on the curve. What is the
magnitude of the frictional force that keeps the vehicle on it's circular path?

Answers

Answer:

6600 N

Explanation:

[tex]F=\frac{mv^{2} }{r} \\\\F=\frac{4400*6^{2} }{24}\\ \\F=6600 N[/tex]

Jupiter, the largest planet in the solar system, has a mass 318 times that of Earth


and a volume that is 1323 times greater than Earth's. Calculate the magnitude of


the gravitational force exerted on a 50. 0 kg mass on Jupiter's surface.

Answers

The gravitational force exerted on a 50 kg mass on Jupiter's surface is 1.30×[tex]10^{3[/tex] N. Acceleration due to gravity on Jupiter is 2.23 times that of the earth.

Gravitational force is due to mass in an object. This is an attractional force with which all objects are attracting each other. All heavenly bodies have great mass. They attract each other and also if an object is reaching in their gravitational pull.

Force of gravity is calculated using the formula

F = G m1. m2/ [tex]r^{2}[/tex]

We are given mass of Jupiter and radius in terms of earth mass and radius.

volume of earth = 4/3 π[tex]r^{3[/tex]

Volume of Jupiter= 1323 × volume of earth

4/3 π[tex]R^{3[/tex] = 4/3 π[tex]r^{3[/tex] × 1323

R = r [tex]\sqrt[3]{1323}[/tex] =10.97 r

So, Gravity force on Jupiter = G 50 × 318 M/10.97 ×10.97[tex]r^{2}[/tex]

                                             =  50 ×5.97×[tex]10^{24[/tex]÷ 10.97×10.97×6.37×[tex]10^{6[/tex]

after calculation we get the value 1.30×[tex]10^{3[/tex] N

To know more about gravitational force here

brainly.com/question/12528243

#SPJ4

to sterilize a 50.0-g glass baby bottle, we must raise its temperature from to . how much heat transfer is required?

Answers

To sterilise a 50.0-g glass infant bottle, we must increase its heat from 22.0 to 95.0 degrees Celsius, or 3066 J of heat is transferred.

What is heat?

Heat is the result of the movement of kinetic energy within a material or an item, or from form of energy to a material or an object. Electromagnetic energy can be transported using three different mechanisms: radiation, conduction, and convection. Conduction of heat through solids, convection of liquids and gases, and electromagnetic radiation (radiation).

What is the heat treatment?

When a substance is subjected to a material-specific phase-change temperature, the material immediately undergoes a phase shift from a solid to a liquid. sources include solar energy, heat pumps, deep geothermal heat pumps, nat gas, lpg (LP), oil, coal, and wood.

Briefing:

50.0 g (0.84 J/g C) of heat was transported (95 C - 22 C)

= 3066 J of heat transferred

To know more about heat visit:

https://brainly.com/question/28921175

#SPJ4

Other Questions
the nurse is preparing to administer furosemide to a 3-year-old with a heart defect. after verifying the arm band, which is the most appropriate second identifier for the nurse to use? Bankers usually insist that prospective business borrowers submit audited financial statements along with a loan application. Why should financial statements be audited by a CPA? if three sides of a triangle are in ratio of 3:5:7 and the perimeter of the triangle is 12xm. what is the length of the longest side? which describes the liability of an owner of a sole proprietorship? responses undefined undefined nonexistent nonexistent limited limited unlimited Primary alcohols can also dehydrate to alkenes. Unlike secondary and tertiary alcohols, the dehydration reaction occurs under an E2 elimination instead of an El mechanism, due to the instability of the primary carbocation that would be formed. Consider the reaction: CH3CH2CH2CH OH H2SO4 product Draw the expected dehydration product of 1 equiv. of a primary alcohol. Select Draw Rings More Erase C H Min receives an average score of 7 after completing 5 math tests. If she has another test coming up, find what mark she must gain to raise her average to 75. the family members of a client with mild dementia are asking the nurse about permitting the elderly father to prepare an advance directive. which information would be essential for the nurse to include in a discussion with this family? What is the effect of Gandhis repeating the words "If you are" in the speech a video file typically contains a single codec that is used for both audio and video images. a. true b. false Simplify the inequality Terri is sawing wood into shorter pieces of equal lengths. Some original pieces are 30 inches long, some are 48 inches long, and some are 72 inches. She cannot waste any wood. What is the longest possible length of the shorter pieces that Terri saws? when the candidates running for a government position do not include the person running for re-election this is called a(n) An independent group of food service personnel conducted a survey on tipping practices in a large metropolitan area. They collected information on the percentage of the bill left as a tip for 20 randomly selected bills. The average tip was 11.1% of the bill with a standard deviation of 2.8%. Assume that the tips are approximately normally distributed. Construct an interval to estimate the true average tip (as a percent of the bill) with 90% confidence. Round the endpoints to two decimal places, if necessary. making internal attributions for your successes and making external attributions for your failures is an example of danny is well-known among his peers as a bully who often picks fights with other students. at age 15, he has already been arrested twice: once for mistreating a puppy and another time for smashing out a teacher's car window. this behavior is consistent with a diagnosis of Can you answer 2 and 3 What makes vampire stories as popular today as they were during the Victorian Age? Find the circumference and the area of a circle with radius 9m .Use the value 3.14 for , and do not round your answers. Be sure to include the correct units in your answers. Which of the following MOST impacted the spread of blues music to the North? essay about the cure for cancer