Answer: The butterfly effect
Explanation:
Distinguish between boiling, melting, and sublimation
Answer:
Boiling: The process of conversion from liquid to gas on heating is called boiling.
Example: Water on heating turns into water vapour.
Melting: The process of conversion from solid to liquid at room temperature is called melting.
Example: Ice cream melting at room temperature.
Sublimation: The Conversion of solid to gas directly is called sublimation.
Example: Camphor, Dry ice
Explanation:
Hope it helps you:))))
Everything in the world is made of matter except you??
TrueFalse
Answer:
False.
Explanation:
Humans are made of matter too :)
In order to be healthy, humans must consume a variety of amino acids. any animal product, such as eggs, milk, and meat, contains all of these amino acids. however, consumption of a wide variety of plant products will also supply the necessary amino acids. describe two different meals you could enjoy that contain only plant products. make sure to include at least five different plants in each meal. (10 points) plants produce grains, vegetables, and fruits. meal two
Dish of Cabbage, carrot, pea, cauliflower and brinjal are the meals we could enjoy that contain only plant products.
Describe two different meals you could enjoy that contain only plant products?
Cabbage, carrot, pea, cauliflower and brinjal are the five different plants based meals. In these meals, vegetables are used which are the parts of plant. We know that vegetables are very healthy and nutritive which can be get from plants.
So we can conclude that dish of Cabbage, carrot, pea, cauliflower and brinjal are the meals we could enjoy that contain only plant products.
Learn more about meal here: https://brainly.com/question/25884013
#SPJ1
Lewis dot structure for H2CCCl2?
Answer:
Explanation:
lewis dot structure:
Carbon has 4 valence electrons and hydrogen has 1 electron. Therefore, in below given way, the lewis dot structure for H[tex]_2[/tex]CCCl[tex]_2[/tex] can be drawn.
What is Lewis dot structure?These illustrations, commonly referred to as lewis structures and electron dot structures, show how electrons are distributed and grouped around atoms.
You must be aware of the total amount of valence electron cloud in order to create the Lewis structure. Based on the atom's group number inside the periodic table, it is possible to determine how many valence electrons are present in a certain atom. Carbon has 4 valence electrons and hydrogen has 1 electron. The lewis dot structure for H[tex]_2[/tex]CCCl[tex]_2[/tex] is given below.
Therefore, in above given way, the lewis dot structure for H[tex]_2[/tex]CCCl[tex]_2[/tex] can be drawn.
To learn more about Lewis dot structure, here:
https://brainly.com/question/20300458
#SPJ2
when 949 J of heat is added to 9 grams of oil at 37˚C , the temperature increases to 62˚C. What is the specific heat of the oil?
Answer:
4.21778 J/(g*C)
Explanation:
specific heat = joules / (mass times temperature change)
949 / (9 times 25)
949 / 225 =
4.21778
2. Observe Examine the flame closely. Is it the wax or the wick that burns?
Answer:
Wax
Explanation:
The combustible material in a candle or its fuel is wax. Before the wax can become fuel, it first needs to get hot enough. To start that heating process, you first need to light the wick with another source of fire, such as a match. As the wick burns down the heat of the flame melts the wax around the wick.
in need of some help with this question please~
when 4g of oxygen gas reacts with excess of hydrogen gas, the volume of water vapour produced at (STP) is ....... L ( H = 1 , O = 16).
a) 22.4
b) 44.8
c) 11.2
d) 5.6
an explanation would be great for future reference <3 thank you in advance!
Answer:
5.60 Liters at STP
Explanation:
First you need the balanced reaction equation
2 H2 + O2 ====> 2 H2O
4 g of oxygen ( O2 ) is 4/(15.999*2) moles of O2 (using periodic table)
Twice the number of moles of H2O re produced (from equation)
at STP the volume of a mole of gas is 22.4 liter/ mole
put all of this together
2 * 4 / (15.999*2) moles * 22.4 L/mole = 5.60 L
lead ions and magnesium ions both have a charge of 2+. predict the ionic equation for this reaction.
As both the ions have charge of +2 the compound formed is PbMg as the like charges will cancel out each other.
What are ions?An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.
Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.Ions of opposite charges combine in ionic compounds.
Learn more about ions,here:
https://brainly.com/question/1488567
#SPJ2
What is the name of the colony shown?
Answer:
The one that is in dark green is (New Hampshire)
if that's not what tell me i will fix it
Hope This Helped
How is Hess's law used to calculate the enthalpy of a reaction?
A. The enthalpy is obtained from the difference in final and initial reactions in a path.
B. Enthalpies from similar equations are substituted for unknown reaction enthalpies. C. The final equation in a reaction path provides the enthalpy for the desired reaction.
D. The desired enthalpy is obtained through adding intermediate reactions together.
Considering the Hess's Law, the desired enthalpy is obtained through adding intermediate reactions together. (option D)
Hess's LawHess's law, also called Law can also be called Law of additivity of the enthalpies of reaction, it is a useful method when it is not possible to calculate the enthalpies of reaction from the enthalpies of formation, or in reactions in which the reaction enthalpy cannot be determined experimentally because it is very slow or very explosive.
Hess's law states that when reactants are converted to products, the enthalpy change is the same whether the reaction takes place in one step or in a series of steps.
In this way, Hess's Law determines that when a chemical reaction can be expressed as an algebraic sum of other reactions, its reaction enthalpy is equal to the sum of the enthalpies of the partial reactions. In this way, it allows thermochemical equations to be treated as algebraic equations, and can be added, subtracted, or multiplied by a number to find the desired thermochemical equation.
SummaryHess's Law states that the sum of the ∆H of each stage of the reaction will give us a value equal to the ∆H of the reaction when it occurs in a single stage.
That is, the desired enthalpy is obtained through adding intermediate reactions together. (option D)
Learn more about Hess'Law:
brainly.com/question/5976752
brainly.com/question/13707449
brainly.com/question/13707449
brainly.com/question/6263007
brainly.com/question/14641878
brainly.com/question/2912965
#SPJ1
What is the largest possible electronegativity difference for a bond to be covalent?
A.
0.5
B.
1.7
C.
0.0
D.
1.0
Covalent bonding is the sharing of electrons between atoms. The electronegativity difference of 1.7 is the largest for a bond to be covalent. Thus, option B is accurate.
What is the electronegativity difference?The electronegativity difference is the parameter used to determine the polarity and the type of the bond formed by the atom of the species. it gives the measure of the atom to attract the shared electrons.
For a covalent bond to form the electronegativity difference between the two atoms of the molecules must be less than 2. A difference of more than 2 results in ionic bond formation.
Therefore, option B. 1.7 is the highest electronegativity difference for a covalent bond formation.
Learn more about electronegativity and covalent bonds here:
https://brainly.com/question/19931135
#SPJ1
. Given the balanced equation representing a reaction:
Fe(s) + 2HCl(aq) → FeCl₂ (aq) + H₂(g)
This reaction occurs more quickly when powdered
iron is used instead of a single piece of iron of the
same mass because the powdered iron
A) acts as a better catalyst than the single piece of
iron
B) absorbs less energy than the single piece of iron
C) has a greater surface area than the single piece of
iron
D) is more metallic than the single piece of iron
Answer:
C
Explanation:
The powdered iron has a greater surface area than the single piece of metal, allowing reactions to be done faster.
It's NOT A because in the reaction Iron is a reactant NOT a catalyst
It's NOT B because it's completely irrelevant to the question
It's NOT D because it's also not relevant to the question at hand
What volume (in mL) of 0.750 M sodium hydroxide is needed to neutralize (react with) 275 ml of 0.500 M sulfuric acid (H2SO4)?
NaOH + H2SO4 -> H2O + Na2SO4
I NEED WORK
We know the formula
C1V1=C2V2C is concentration and V is volume
0.750V1=275(0.5)0.75V1=137.5V1=183.34mLThe new volume will be by using the relation between molarity and volume formula.
What is molarity?Molarity, also termed as molar concentration in a solution, is a method of determining how much material is present in a chemical solution.
Calculation of volume with the aid of molarity formula is shown below:
Volume is calculated by using the molarity formula.
[tex]M_{1} V_{1} = M_{2} V_{2}[/tex]
Where, M is molarity and V is volume.
It is given that, [tex]M_{1}[/tex] = 0.750 M , [tex]M_{2}[/tex] = 0.500 M, [tex]V_{1}[/tex] = 275 ml .
Now, put the value of given data in molarity formula.
[tex]M_{1} V_{1} = M_{2} V_{2}\\V_{2} = M_{1} V_{1} / M_{2}\\V_{2} = (0.750 M) (275 ml) / 0.500 M\\V_{2} = 183.34 ml[/tex]
Therefore, the volume will be 183.34 ml.
To know more about molarity click here.
https://brainly.com/question/2817451.
#SPJ2
When would a transformation of chemical energy to electrical energy occur?
A. when the current becomes zero
B. when a reaction produces the same products
C. when electrons stop moving between atoms
D. when there is chemical reaction between metals and nonmetals
I think that the answer MAY be D..............but I don't know.
Answer:
it would occur when there are two different metals involved.
what is 1+1? answer in full sentences.
In a laboratory experiment, you perform the above reaction. However, you only get 7.50g of Al. What was the percent yield of that experiment?
Answer:
Explanation:
n a laboratory experiment, you perform the above reaction. However, you only get 7.50g of Al. What was the percent yield of that experiment?
Treatment of Poison oak
Answer:
Apply cool compresses to the skin. Use topical treatments to relieve itching, including calamine lotion, oatmeal baths, Tecnu, Zanfel, or aluminum acetate (Domeboro solution). Oral antihistamines, such as diphenhydramine (Benadryl), can also help relieve itching.
The fact that water is attracted to itself, a property called:.
Kiera and Grace are sisters. They both have blue eyes. Kiera is extremely short for her age and Grace is exceptionally tall for her age. Develop a hypothesis as to why the sisters have different statures. Justify your hypothesis in two or more complete sentences.
The hypothesis as to why the sisters have different statures occurs because from genetics we know that it is linked to the alleles so one sister is shorter than the other one was they had different alleles.
What is the genetic similarity between siblings?On average, siblings share about 50% of their DNA with each other, but some siblings share even more and some less. So while we all have approximately 50% DNA from each parent, the segments we end up getting are completely random.
Hereditary character or gene that is manifested by the absence of the opposite gene, called dominant, in this case, Kiera is extremely short for her age.
See more about genetic at brainly.com/question/12985618
#SPJ1
Soil is conserved from erosion to
Answer:
keep it from being washed away by water
Scientists hypothesize that Earth's first oceans were made of fresh water. How did oceans obtain fresh water?
Answer:
The oceans obtained freshwater from glaciers melting. The freshwater was then trapped into small places below waves, which could be a reason why there is not much freshwater in the world.
Why are fat layers and thick white fur advantageous for polar bears?
Group of answer choices
A. They insulate the bears and allow them to blend in with their environment.
B. They help the bears get rid of excess body heat more readily.
C. They help bears hibernate longer.
D. They allow the bears to run and swim faster to escape predators.
Answer:
A. They insulate the bears and allow them to blend in with their environment
fossil fuel in a sentence
biomass in a snentence
Answer:
Below•
Explanation:
Fossil Fuel: It's a natural gas based on natural materials such as coal.
Biomass: It's the total weight of substance.
[tex] \qquad \qquad...[/tex]
Does the size of the nucleus affect the possibility of nuclear fission or fusion happening?
How would you write 16,340 in scientific notation with 2 significant figures?
Answer:
1.6 x 10^4
Explanation:
16,340
with 2 significant figures is
16000
in scientific notation
is 1.6 × 10^4
because 10^4 means
if you move the decimal point 4 spaces then
1.6 becomes 16000
https://brainly.com/question/17715063?
What do makeup experts use in order to create different skin effects?
Answer:
on-skin silicone, liquid latex, and gelatine
Explanation:
hope this helps:)
Pure N2 in a flask has a pressure of 1.0 atm. If O2 gas is added until the number of molecules of O2 is twice as that of N2. What is the total pressure of the flask
The total pressure of gasses (nitrogen and oxygen) in the flask is determined as 3 atm.
Balanced chemical equation of N2 and O2
The balanced chemical equation of nitrogen gas and oxygen gas is determined as follows;
N₂ + 2O₂ → 2NO₂
PV = nRT
Pressure is directly proportional to number of molesP(total) = P(N₂) + PO₂
P(total) = 1 atm + 2(1 atm)
P(total) = 3 atm
Thus, the total pressure of gasses (nitrogen and oxygen) in the flask is determined as 3 atm.
Learn more about pressure here: https://brainly.com/question/25736513
#SPJ1
What is the phase of water at 0.5 atm and 100°C?
Water
(liquid)
Water vapor
(gas)
Temperature (°C)
Pressure (atm)
1-
0.5-
0.25-
0
OA. Gas
OB. Liquid
O C. Solid
OD. Gas and liquid
10
Ice
(solid)
0.01
100
The phase of water at 0.5 atm and 100°C is gaseous phase.
What is water phase?
Water exists in three different phases such as liquid, gas, and solid.
The phase of the given water can be determined using phase diagram at standard temperature and pressure as shown in the image uploaded.
At 0.5 atm and 100 °C, the water is still in vapour or gaseous phase.
Thus, the phase of water at 0.5 atm and 100°C is gaseous phase.
Learn more about water phase here: https://brainly.com/question/1612862
#SPJ1
I NEED HELP ASAP!!!!!!!!!!!!
WITHIN THE HOUR
Thanks
Define pressure and temperature.
Answer:
The pressure of a given amount of gas is directly proportional to the temperature at a given volume. When the temperature of a system goes up, the pressure also goes up, and vice versa. The relationship between pressure and temperature of a gas is stated by the Gay-Lussac's law.