This question is kinda tricky

The static coefficient of friction between m1 and m2 and m2 and the wall (designated as s1 and s2, respectively) if the minimum force F minimum necessary to prevent the blocks from separating and sliding under the action of gravity is F minimum.

What is static friction coefficient?

The ratio of limiting friction to the usual reaction between the surfaces is known as the coefficient of static friction.

This equation yields the minimum coefficient of static friction:

When the radius of curvature R = 190 m and the vehicle's speed V is 72 km/h (20 m/s), the smallest value of the coefficient of static friction Typically, it is represented by the Greek letter mu ().

In terms of math, is equal to F/N, where F stands for frictional force and N for normal force. The coefficient of friction has no dimensions because both F and N are measured in units of force (such as newtons or pounds). friction equals 0.21.

To learn more about coefficient of stastic friction refer to:

https://brainly.com/question/25050131

#SPJ 9

The total translational kinetic energy of 1.6 mol of N₂ molecules at 27°C is calculated as 9673 J as pern the Kinetic energy formula with Boltzmann Constant.

Remember that the mass of the item multiplied by the square of its linear velocity (around its center of mass) yields translational kinetic energy, which is then divided by two.

The energy of motion of a body is equivalent to the work it would perform if it were brought to rest, according to general physics.

For a rigid body with constant mass, the translational kinetic energy is dependent on motion through space and is calculated as the product of the square of the speed and the product of the mass divided by half.

N2 is an adiatomic molecule

Total translational Kinetic energy of adiatomic gas

E = 5/2 NKT

1 mol = 6.022 x [tex]10^{23}[/tex]

1.6 mol = 1.6 x (6.022 x [tex]10^{23}[/tex])

= 9.635 x [tex]10^{23}[/tex]

Boltzmann constant K = 1.38 x [tex]10^{-23}[/tex] J/K

Temperature = 18° C

= (18 + 273) K

= 291 K

Putting the values,

E = 5/2 x (9.635 x [tex]10^{23}[/tex] ) x (1.38 x [tex]10^{23}[/tex]) x 291 K

= 9673 J

To know more about Kinetic Energy visit:

https://brainly.com/question/14799724

#SPJ9

Answer:

Option (c) - Kg, m, s

Explanation:

The internationally agreed system of units for physical quantities is based on the fact that kg(kilogram) is the unit of mass, m(meter) is the unit of length and (second) is the unit of Time.

Answer:

Bullets are cylindrical metal projectiles shot from firearms. Their main function is to kill or otherwise incapacitate. They come in numerous varieties for use in handguns, rifles, and machine guns. There is also special ammunition capable of penetrating armor, firing underwater, or firing "silently" at subsonic speeds. However, their designs are all basically the same. A typical cartridge consists of four components: the cartridge case, primer, propellant charge and bullet. When a gun trigger is pulled, the primer is struck, igniting the propellant. This causes a rapid expansion of gas, which forces the bullet forward and ejects the casing. Contrary to popular belief, guns are not loaded with bullets, but cartridges, and they fire bullets (since bullets are a more common term and the actual objects responsible for harm, they receive the recognition).

While small in size (the most popular handgun bullet is 9 mm in diameter) bullets posses enough kinetic energy to cause serious damage. Using a kinematics formula, it is possible to determine the acceleration of a bullet when the muzzle velocity and barrel length of a gun are known.

v2 = vo2 + 2as

Where

v is the muzzle velocity

vo is the initial velocity of the bullet, which is zero

a is the acceleration

s is the barrel length

Since acceleration is the desired value, the derived formula is this:

equation

When fired from a Beretta 92S, the standard issue US Army pistol, a 9 mm Parabellum bullet has a muzzle velocity of 335 m/s. With its 127 mm barrel length, the bullet's acceleration is calculated to be 4.4 × 105 m/s2.

The acceleration of a bullet depends largely on the gun from which it is fired, along with the intent of the user. Pistol bullets generally feature a lower acceleration than rifles or machine guns. Also, individuals involved with clandestine operations may use firearms with silencers, which suppress bullet speed and require special subsonic ammunition.

Remember, guns don't kill people. Bullets do. To paraphrase Chris Rock in Bigger, Blacker and Uncut, if bullet prices were raised to $5,000 each, there would be a drastic decrease in murders [mp3].

The ratio of the tangential speed of a point on the rim to the tangential speed of a point halfway between the center and the rim is 2.

The correct option is B.

The wheel's angular velocity The rate at which the angular displacement changes over time is known as the wheel's angular velocity. Because the angular velocity is constant, a point just on rim will have constant tangential velocity.

The angular velocity of a body refers to the pace at which it revolves or circumambulates an axle. Sometimes, the Greek letter omega symbolizes angular velocity. Due to the fact that it is expressed as an angle every unit of time, the angular velocity in the SI was measured in radians per second.

To know more about Angular velocity visit:

https://brainly.com/question/12446100

#SPJ9

Coal is burned to create steam, which is then used to generate electricity at coal-fired power stations. Under extreme pressure, the steam generated enters a turbine, which turns a generator to provide power. In order to restart the process, the steam is then cooled, condensed back into water, and fed back into the boiler.

For example, the Kingston Fossil Plant near Knoxville, Tennessee, uses coal to heat its boilers to around 1,000 degrees Fahrenheit in order to produce high-pressure steam as a practical illustration of this.

How is energy generated by burning coal?

Whether bituminous, subbituminous, or lignite, they are all burned in coal-fired power plants. The heat generated by coal combustion is utilized to turn water into high-pressure steam, which drives a turbine and generates electricity.

To learn more about coal visit:

https://brainly.com/question/22647554

#SPJ9

The net force (in Newton) on the box of supplies, given that Rico pulled it with a force of 200 N is 256 N

From the question given above, the following data were obtained:

The net force on the box of supplies can be obtained as illustrated below:

Net force = force of pull - opposite force

Net force = 200 - (-56)

Net force = 200 + 56

Net force = 256 N

Thus, the net force on box is 256 N

Learn more about net force:

https://brainly.com/question/18109210

#SPJ1

By applying net force formula, the acceleration of the box is 1.8 m/s²

Acceleration is the velocity change per time taken. It is a vector quantity and it is measured in m/s²

Given that Marco pulls the box away from his brother, applying a force of 38 N to the left. His sister helps him by applying an additional force of 36 N to the left. Their brother applies a force of 35 N to pull the box in the opposite direction. The box weighs 22 kg.

F = ma

Where

To determine the acceleration of the box, substitute all the parameters into the formula

(38 + 36) - 35 = 22 a

74 - 35 = 22a

39 = 22a

a = 39/22

a = 1.77 m/s²

Therefore, the acceleration of the box is 1.8 m/s² approximately.

Learn more about Acceleration here: https://brainly.com/question/605631

#SPJ1

If the temperature of the gas is decreased then the pressure will also decrease.

The molecules of a gas receive more energy when heated, causing them to move more quickly. This results in increased pressure and more impacts on the container's walls. On the other hand, cooling the molecules will cause them to slow down and reduce pressure.

This is more explained by Gay Lussac's Law which states that the pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature.

                                      P1/T1 = P2/T2

Thus, with decrease in temperature the pressure will decrease as the move of molecules will be slow now.

To know more about Gay Lussac's Law visit the link:

https://brainly.com/question/2683502?referrer=searchResults

#SPJ9

The efficiency of the motor is 92.6%

The input energy comes from the motor.

W_in = P . t

Where:

P = V. i

  = 9 volt. 3 A = 27 Watt

Hence,

W = 27 watt . 10 seconds = 270 Joules.

The output work is the potential energy.

W_out = F . s

           = 50 . 5 = 250 Joule.

The efficiency is calculated as:

Efficiency = W_out / W_in x 100%

                = 250/270 x 100% = 92.6%

Learn more about work and energy here:

https://brainly.com/question/13387946

#SPJ4

The force exerted on the ball is 28.88 N.

We need to know about force to solve this problem. According to second Newton's Law, the force applied to an object will be proportional to mass and acceleration. Hence, it can be written as

F = m . a

where F is force, m is mass and a is acceleration

From the question above, we know that

vo = 0 m/s

vt = 7.6 m/s

s = 1.02 m

m = 0.15 kg

Find the acceleration

vt² = vo² + 2as

7.6² = 0² + 2.a.0.15

a = 57.76 / 0.3

a = 192.53

Find the force exerted

F = m .a

F = 0.15 . 192.53

F = 28.88 N

Find more on force at: https://brainly.com/question/25239010

#SPJ4

The magnitude of the constant frictional force that acts on the car is 574.6

The frictional force is the force that acts to oppose the relative motion of an object over another.

Friction is a contact force that acts at the surface of contact between two bodies.

The frictional force acting on an object depends on the following:

The total force exerted by the friends = 800 N

Force on the car as it moves will be = mass * acceleration

acceleration, a = v² - u² / 2 * s

a = 1.40² - 0² / 2 * 5

a = 0.196 m/s²

force = 1.15×10³ kg * 0.196 m/s²

force = 225.4 N

Frictional force = 800 - 225.4

Frictional force = 574.6 N

Learn more about frictional force at: https://brainly.com/question/4618599

#SPJ1

Complete question:

A car of mass 1.15×10^3kg is stalled on a horizontal road. You and your friends give the car a constant, forward, horizontal push. There is friction between the car and the road.

the combined force that you and your friends exert has magnitude 8.00×102n , and starting from rest the car reaches a speed of 1.40 m/s after you have pushed it 5.00 m . find the magnitude of the constant friction force that acts on the car.

The required electric field is  9.58 × 10⁻² N/C

We know that the electric field, E is a product of resistivity and current density

∴ E=jρ ......(i)

Where ρ⇒ Resistivity

j ⇒ Current density

j = I/A

Now, as per the question,

Resistivity of copper, ρ = 1.68  × 10⁻⁸  Ωm

Current, I = 30 ampere

Diameter = 0.259 cm = 0.00259 m

So, Radius, r = Diameter/2

                = 1.295 × 10 ⁻⁴m

Now, Cross-sectional area, A = πr²

                                                 = 3.14 × (0.001295)²

                                                 = 5.26 × 10⁻⁶ m²

Putting the values in equation (i), we get:

[tex]E = 1.68 \times 10^{-8} \times\frac{30}{5.26 \times 10^{-6} }[/tex]

[tex]E= 9.58 \times 10^{-2} N/C[/tex]

Therefore, the required electric field is 9.58 × 10⁻² N/C

Read more about  Electric field:

https://brainly.com/question/14972426

#SPJ9

Answer:

Since 60 mph = 88 ft/sec

10 mph = 14.7 ft/sec

70 mph = 7/6 * 88 ft/sec = 103.7 ft/sec

a = (v2 - v1) / t = (103.7 - 14.7) ft/sec / 7200 sec = .0124 ft/sec^2

The forces acting on me are static frictional force and reaction force of the book. The forces acting on the book moving with a constant speed are Applied force and Kinetic frictional force.

Forces acting on me are

The book at rest, will have a static frictional force. So when I push the book, these forces will act on me. According to Newton's third law of motion, when I apply a certain amount of force on the book, the book will exert the equal amount of force on me.

Forces acting on the book are

The book when moving at constant velocity will have zero net force, because according to Newton's second law of motion, force is directly proportional to acceleration. If the velocity is constant, acceleration will be zero and net force will also be zero. Since the book is moving on a table, a kinetic frictional force will act on the book to resist the movement of the book.

Therefore,

To know more about Newton's second law of motion

https://brainly.com/question/13447525

#SPJ1

Option C about friction is correct statement with initial velocity v0.

What is friction?

friction is a force that opposes motion between any surfaces that are touching. Friction can work for us yet against of us .

It is the action of one surface or object rubbing against another .

Solution -

According to the given question in this case force of friction has a tendency to rotate the cube in anticlock wise direction.

So normal reaction will shift in forword direction to balance the force due to torque of friction.

Thus,

During motion the normal reaction shift towards posetive x- axis from the centre of mass is correct.

To know more about friction click

https://brainly.com/question/24338873

#SPJ9

Answer:

58.01

Explanation:

because this is he answer to the question 019.10

(A) The wavelength of each of these waves when they are sent through sea water is 0.0126 m and 0.0076 m respectively.

(B) The wavelength of each of these waves when they are sent through freshwater is 0.012 m and 0.0074 m respectively.

(C) The time taken for the echo to return to the ship is 3.97 seconds.

The wavelength of the sound wave in sea water depends on the speed of sound in seawater and frequency of the wave.

The speed of sound in seawater, v = 1,510 m/s

λ = v/f

when the frequency, f = 120 kHz

λ = 1510 / 120,000

λ =  0.0126 m

when the frequency, f = 200 kHz

λ = 1510 / 200,000

λ =  0.0076 m

The speed of sound in freshwater, v = 1481 m/s

when the frequency, f = 120 kHz

λ = 1481 / 120,000

λ =  0.012 m

when the frequency, f = 200 kHz

λ = 1481 / 200,000

λ =  0.0074 m

The time taken for the echo to return is calculated as follows

v = 2d/t

t = 2d/v

t = (2 x 3,000 m) / (1510 m/s)

t = 3.97 s

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1

The center of mass of the three mass system is at 83cm.

The center of mass of an object or a collection of objects is known. It represents the system's average location by weighing the mass of each component. For straightforward rigid structures with uniform densities, the center of mass is located at the centroid.

Given the mass of the meter stick is:

M = 0.5kg.

Since the meter stick is uniform, the center of mass of the meter stick is at 50cm or 0.5m.

Let the distance of the meter stick's center of mass from 0cm be x1. Then x1 = 0.5m.

Now a mass m2 = 1kg is attached at 50cm mark.

So the distance of m2 from 0cm is x2 = 50cm = 0.5m.

Similarly a mass m3 = 3kg is attached at the every end or 100cm mark. So the distance of m3 from 0cm is x3 = 100cm = 1m.

Now the position of the three mass system from 0cm is given by,

So the center of mass of the three mass system is at 83cm.

To know more about Center of mass visit:

https://brainly.com/question/8662931

#SPJ9

Answer:A. argon(Ar)

Argon is commonly considered to be a chemical by most people

Initial energy equals (M/2)*Vo2 = 12.80 J.

At 4.7 m and V = 5 m/s, total energy equals (M/2)

*5^2 + M*g*4.7 = 1.25 + 4.61 J

a portion of the energy in a ball LOST = (12.80-5.86)/12.80 \s= 0.542

We are informed that a plastic ball with a mass of 0.1 kg is tossed into the air as an example of energy conservation. It starts off at a height of three meters and a speed of 10 meters per second. Now moving at three meters per second. We are interested in learning how much of its initial energy has been lost through friction. We now know that the total mechanical energy is constant for an isolated system. Thus, the change in gravitational potential energy descends to you along with the change in kinetic energy data K. additionally the data on N. G. Lost to air friction Zero is equal to E. F. Keep in mind that the gravitational potential energy you I is zero at the beginning.

It follows that either their energy changes or that the energy lost to friction belt E. F. is equal to minus daughter. Kay, without a doubt, which is without uh-huh. Mm. V squared divided by the starting speed is the final speed. M. G. H. plus V not squared Additionally, the ball's initial energy is entirely kinetic. Since this is a half-squared north, the lost energy delta E. F. is the proportion of the original energy that is reflected and lost.

This therefore equals half of M. Squared into the not minus V squared into the not minus to G. H. multiplied by half. squared M Vinod Thus, this fraction becomes the square of the starting speed. We not squared minus the final speed squared square V squared minus twice the acceleration brought on by gravity, G times the height of the ball. H centered over Vinod. Therefore, if we enter our numbers here, this becomes 10 m/s squared times three m/s squared times two, or 9.81 m/km2 times. three meters tall times 10 meters per second squared.

As a result, 32 321 the amount of energy that is lost when there is an uncertainty about e f over e I This is the percentage that is lost due to air friction, or 32.1 percent.

To know more about energy click on the link:

https://brainly.com/question/1932868

#SPJ4

The resultant speed of the person on the cruise ship is 12.62 m/s.

The resultant speed of an object is the single speed which can effectively represent two or more speed of the object.

The magnitude of the resultant speed of the person on a cruise ship is calculated as follows;

Vr² = Va² + Vb²

where;

Substitute the value of the north speed and east speed to determine the resultant speed of the person on the ship.

Vr  =  √Va² + Vb²

Vr = √[(3.9 m/s)² + (12 m/s)² ]

Vr = 12.62 m/s

Thus, for a person on a cruise ship is doing laps on the promenade deck at a speed of 3.9 m/s to the north and the speed of the ship 12 m/s to the east, the resultant speed is 12.62 m/s.

Learn more about resultant speed here: https://brainly.com/question/25239010

#SPJ1

The complete question is below:

Find the resultant speed of the person

True now in fact this planet has a mass of at least 0.37 jupiter masses. is this planet a likely candidate to have life like that on earth

Due to its greater mass, the planet would be subject to a stronger gravitational pull. The gravitational pull depends on two things:

Weight of the body

Distance

The planet's mass is 118 times more than Earth's, therefore the life forms there would be very different from those on Earth.

The supplied response is accurate since the planet's is far greater than the earth's, and it also relies on the planet's distance from its star in the solar system and the quantity of heat that it receives. Europa would be submerged in water as a result of the ice being warm enough to melt.

Oort cloud perturbations are not considered to be extinction events.

Supernovas are extinction-level events.

Learn more about planet here:

https://brainly.com/question/14581221

#SPJ4

Answer:

A collision is an interaction between two objects that have made contact (usually) with each other. As in any interaction, a collision results in a force being applied to the two colliding objects. Newton's laws of motion govern such collisions

An interaction between two items that have made contact with one another  is referred to as a collision. A collision exerts a force on the objects interacting, just like any other interaction. Such collisions are regulated by Newton's laws of motion.

In physics, a collision, which is also known as an impact, is the abrupt, violent coming together and in near vicinity of two bodies, such as two pool cues, a golf club and a ball, a hammer as well as a nail, two railroad cars when linked, or a falling item and a floor.

The force and the amount of time the objects are in touch, in addition to the materials the two objects are made of, have an impact on the outcome of the impact. Generally,is common knowledge that a hardened steel ball bounced on a steel plate would rebound almost to the original position from where it was dropped, while a ball made of putty and lead will not.

To know more about collision:

https://brainly.com/question/13138178

#SPJ2

The Centre of gravity is the point on an object where the force of gravity is considered to act.

Every object that exists on the earth has weight and because of that weight, certain gravity acts on it. When we calculate the total weight of the object, mainly center is taken as the point where the whole weight of the object is accumulated.

for instance, in the seesaw, the middle portion of it acts as a center of gravity which balances out both sides.

It plays a very important role in calculating big and complex problems of gravitation. It simplifies calculations to treat the mass of an object as if it is concentrated at one point only. It is an imaginary point that stable the object.

To learn more about centre of gravity, follow the below link:

https://brainly.com/question/874205

The speed of an object is the rate of change of its position, and the object's velocity includes its speed as well as its direction of motion. The rate of change of the object's velocity gives the acceleration.

To learn more about Speed,Velocity and Acceleration refer to:

https://brainly.com/question/2169703

#SPJ13

The kelly - bessemer process used for converting the iron metal to molten steel by injecting air into molten pig iron.

Molten steel (from an oxygen or electric arc furnace) is poured into a ladle that is brought to the inlet of a continuous casting machine, raised onto a turret, and poured into a tundish. This is a large vessel that ensures the continuous flow of hot metal through a submerged entry nozzle and into a water-cooled and vertical copper mould, where the solidification starts as an outer shell starts encasing a liquid core.         Hydrogen is highly soluble in molten steel, including weld metal.

    The partial pressure or concentration of hydrogen above the molten steel determines the equilibrium solubility. It is a really difficult process.

Learn more about Molten steel here

https://brainly.com/question/28354355

#SPJ4

The function should be matched to the correct part of the neuron as follows:

A neuron can be defined as a nerve cell that's saddled with the responsibility of transmitting electrical signal (impulses) down an axon across a cellular membrane of the body of a living organism through an action potential.

In Science, the neuron comprises different parts and these include the following:

In conclusion, we can reasonably infer and logically deduce that a neuron transmits electrical signal (impulses) down an axon (a long, tail-like structure) across a cellular membrane of the body of a living organism to another neuron, usually through a process referred to as an action potential.

Read more on neurons here: brainly.com/question/13076783

#SPJ1