The electric field between the disks is 8.43*10^6 N/C
What is electric field of charged spherical spheres ?
A simple application of Gauss' law will yield the electric field of a conducting sphere with charge Q. In the case of a sphere-shaped Gaussian surface with radius r > R, the electric field is directed outward and has the same strength at every point along the surface. Simply multiplying the electric field by the spherical surface's area yields the electric flux.
The electric field is observed to be the same as a point charge Q at the sphere's centre. A Gaussian surface at r R will encompass no charge because all the charge will be on the conducting surface, and by virtue of its symmetry, can be observed to be zero at all places inside the sphere
Diameter of the disks = 1.6cm
Radius of the disks = 1.6/2= 0.8cm= 0.008m
gap between 2 disks d = 1.2mm = 0.0012m
Charge Q = ±15nC
E =σ/ϵ = Q/Aϵ = 15*10^-9/(8.854*10^-12*3.14*(0.008^2))
= 8.43*10^6 N/C
here,
σ (sigma) is surface charge density (C/m^2) and
ϵ (epsilon) is permittivity of free space
The electric field between the disks is 8.43*10^6 N/C
To know more about electric field from the given link
https://brainly.com/question/2193955
#SPJ9
1) A sample of a gas is in a container. The temperature of the gas is decreased. Based on the relationship between temperature and pressure, what must have happened to the pressure?
2) A gas is in a container with constant temperature. A pressure change caused the volume to decrease. Based on the relationship between pressure and volume, what must have happened to the pressure?
When solving projectile problems, you may hear that “motion in the x- and y-directions are independent of each other.” What does this mean, in terms of your problem solving?
x and y directions are the component of projectile motion. x represents horizontal motion and y represents vertical motion.
There are the two components of the projectile motion - horizontal and vertical movement. And on the grounds that perpendicular components of movement are impartial of every other, these components of movement can be mentioned separately.
Projectile motion is a form of movement skilled by an object or particle that is projected close to Earth's surface and moves alongside a curved route under the action of gravity most effective.
Projectile motion is the movement of an item thrown into the air. After the preliminary pressure that launches the item, it only experiences the pressure of gravity. The item is known as a projectile, and its route is known as its trajectory.
Learn more about projectile motion here:- https://brainly.com/question/1912408
#SPJ1
FIGURE 2 shows that a solid, frictionless cylindrical pulley with the radius 0.33 m is used to draw water from a well. A bucket of mass 1.53 kg is attached to a cord that is wrapped around the cylinder. We assume the cord has negligible mass and does not stretch or slip the pulley. Given that the moment of inertia of the pulley is 0.385 kg m².
(a) Calculate the angular acceleration a of the pulley and the linear acceleration a of the bucket.
(b)Determine the tension in the cord.
The angular acceleration a of the pulley and the linear acceleration a of the bucket are 12.85 rad/s² and 4.24 m/s² respectively.
The tension in the cord is 6.49 N.
What is angular acceleration?The angular acceleration of an object is the rate of change of angular velocity with time.
Apply the principle conservation angular momentum to determine the angular acceleration of the pulley.
τ = Iα
Fr = Iα
mgr = Iα
α = mgr/I
where;
m is mass of the bucketg is acceleration due to gravityr is the radius of the pulleyI is moment of inertia of the pulley.α = (1.53 x 9.8 x 0.33) / (0.385)
α = 12.85 rad/s²
The linear acceleration of the pulley is calculated as follows;
a = αr
a = 12.85 rad/s² x 0.33 m
a = 4.24 m/s²
The tension in the cord is calculated as follows;
T = ma
T = 1.53 kg x 4.24 m/s²
T = 6.49 N
Learn more about angular acceleration here: https://brainly.com/question/21278452
#SPJ1
At a construction site, a 30.0-kg bucket of concrete is
connected over a very light frictionless pulley to a 375-N
box on the roof of a building. (Figure 1) There is no
appreciable friction on the box, since it is on roller
bearings. The box starts from rest.
Answer:
What is the full question?
module 1 question 10
A student drove to the university from her home and noted that the odometer on her car increased by 14.0 km. The trip took 20.0 min.
(a) What was her average speed?
km/h
(b) If the straight-line distance from her home to the university is 10.3 km in a direction 25.0° south of east, what was her average velocity?
km/h (25° S of E)
(c) She returned home by the same path. The total time to leave home, travel to the university, and return home was 7 h 30 min. What were her average speed and velocity for the entire trip?
average speed
km/h
average velocity
km/h
(a) Average speed is 42 km/h
(b) Average velocity is 31.21 km/h (25° S of E)
(c) Average speed and average velocity are 3.73 km/h and 0 km/h respectively.
The average speed is calculated by distance travelled divided by time. The distance travelled is 14.0 km and time taken for the trip is 20.0 min.
The time taken for the trip in hours = 20.0/60 = 0.33 hr
Average speed = 14.0/0.33 = 42 km/h
The displacement is the shortest distance between two points. For this trip the displacement is 10.3 km in the direction 25.0° south of east. Then the average velocity is calculated by change in displacement divided by time.
Average velocity = (10.3-0)/0.33 = 31.21 km/h (25° S of E)
Average speed of the total trip = (14 + 14)/7.5 = 3.73 km/h
Average velocity of the total trip = (Final position - Initial position)/time = (0 - 0)/7.5 = 0 km/h
To know more about average velocity here:
https://brainly.com/question/12984400
#SPJ1
how might you change the number of people to decrease the carriages acceleration?
The rate at which an object's velocity with respect to time changes is referred to as acceleration in mechanics. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force applied on the item determines the object's acceleration.
What does the word "acceleration" mean?The definition of acceleration (symbol: a) in physics or physical science is the rate of change (or derivative with respect to time) of velocity.
How can you express speed in writing?The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t).
What is the velocity in units?The displacement that an object or particle experiences with respect to time is expressed vectorially as velocity. The meter per second (m/s) is the accepted unit of velocity magnitude (also known as speed).
Is zero acceleration possible?When an item is travelling at a constant speed, its acceleration can be zero. There won't be any acceleration because the speed is constant, hence there won't be any change in speed. Zero acceleration is shown by the graph above.
To Learn more About Acceleration, Refer:
https://brainly.com/question/460763
#SPJ13
What did Newton imagine on top of his imaginary mountain for his thought experiment on gravity?A. treeB. planeC. birdD. cannon
D. cannon
ExplanationNewton imagined a cannon on top of a mountain. Without gravity, the cannonball should move in a straight line. If gravity is present, then its path will depend on its velocity.( A and B)
If there were no forces of gravitation or air resistance, the body should follow a straight line away from Earth, in the direction that it was projected (E), If a gravitational force acts on the projectile, it will follow a different path depending on its initial velocity.
so, we can conclude the answer is
D. cannon
I hope this helps you
A ray of sunlight moves from the air into the denser medium of a pond. The light ray will? A) Be reflectedB) not be affected C) speed up D) slow down
When a ray of light passes from the rarer medium to the denser medium, it bends towards the normal.
When the ray of sunlight moves from the air into the denser medium of a pound, the light ray will slow down as it passes rarer to denser medium. It bends towards the normal.
Thus, the correct option is (D).
A projectile is fired from the edge of a cliff 200 m high with an initial speed of 30 m/s at an angle of 45° above the horizontal.
Determine the angle the velocity makes with the horizontal just before impact.
Answer:
By the law of conservation of energy,
m(gh + 1/2u^2)= m(1/2v^2) ---------- cancelling m from both side
=> 4.8 * 200 + 1/2 * (30)^2 = 1/2(v^2)
=> 1460 + 450 = v^2/2
=> 2410 * 2 = v^2
=> v = √4820
= 69.426m/s
Answer: 69.426 m/s
a boat traveling at 22.0 m/s when the driver see'sa log in the river ahead. The driver backs off on the throttle and slows the boat to 8.00 m/s in a time of 5.00 seconds What is the acceleration of the boat?
The acceleration of the boat is 2.8 m/s².
Acceleration is the fee of trade of the rate of an object with admire to time. Accelerations are vector quantities. The orientation of an item's acceleration is given by means of the orientation of the internet pressure appearing on that object.
The acceleration is the rate of change of displacement. Acceleration is the price of an alternative to speed. velocity is a vector amount as it consists of each magnitude and path. Acceleration is also a vector amount as it's far just the rate of alternate speed. Newton s 2nd law of movement additionally referred to as the law of force and Acceleration, a pressure upon an item causes it to accelerate consistent with the method internet force = mass x acceleration.
So the acceleration of the object is at once proportional to the pressure and inversely proportional to the mass.
Calculation:-
v = u - at
8 = 22 - a×5
a = (22 - 8)/5
a = 2.8 m/s²
Learn more about acceleration here:-https://brainly.com/question/460763
#SPJ1
Please answer the question on the photo
Answer:
your answers is option d 75 ohms
ANSWER IN PHOTO, NO LINK!
3. Draw additional masses to show how the block can be made to move toward point A. Be sure to draw the
string and label the mass of the block. For full credit, draw the minimum number of blocks required to make
the block move toward point A.
Answer:
Any mass greater than 150g attached to 100g will make the block move towards point A. Thus, there can be any number of blocks attached to it, but the total mass of the attached blocks must add up to 150g.
What is the unit of force in SI?The newton, abbreviated N, is the SI unit of force. These are base units that are pertinent to force.
The symbol for the length unit of a meter is m. the kilogram (kg), a unit of mass. s stands for the second, a unit of time.
How do you determine a seesaw's balance?Seesaws are regulated by a straightforward equation that states that for balance to occur, the force applied to one end of the seesaw multiplied by the distance from the pivot should equal the force applied to the other side of the seesaw multiplied by the distance from the pivot.
To know more about force, visit:
https://brainly.com/question/13482747
#SPJ13
the diagram at right shows a person sitting in a chair riding on a ferris wheel. the chair is attached to the wheel by a rod. the ferris wheel turns with constant speed the mass of the person is two times that of the chair
The ranking of the boy's location in the ferris wheel ridding motion above comparing his felt weight from the highest to the lowest is 1, 2 and 4 tie, 3.
The correct answer choice is option c.
The correct image is attached.
Understanding the weight felt by the boy ferris wheel ridding.In motion above by the boy, the boy feels he weighs the greatest at location 3 among all the location simply because there is a force known as centripetal force which technically acts upward at that point which makes more weight be felt among all.
However, at the locations 2 and 4, the force actually was acting side ways, which would still not affect the weight from 3 in the circular movement. And at location, the weight felt feels the lowest among all.
In conclusion, the locations of the boy on a ferris wheel ridding from the greatest is highest to the lowest is 1, 2 and 4 tie, 3.
Complete question:
The diagram above represents a Ferris wheel-a circular ride that rotates in a vertical circle with seats where people sit. The numbers correspond to a seat in four difference places as the Ferris wheel rotates.
Imagine a boy sitting in this seat riding the ride with the Ferris wheel rotating in the direction shown (at constant speed). Rank the locations according to how much the boy would feel like he weighs,greatest first.
a. 1, 2, 3, 4
b. 1 and 3 tie, 2 and 4 tie.
c. 1, 2 and 4 tie, 3
d. 4, 3, 2, 1.
Read more on ferris wheel ridding:
https://brainly.com/question/11886264
#SPJ1
An Alaskan rescue plane traveling 43 m/s drops a package of emergency rations from a height of 108 m to a stranded party of explorers. The acceleration of gravity is 9.8 m/s^2. Where does the package strike the ground relative to the point directly below where it was released? What is the horizontal component of the velocity just before it hits? What is the vertical component of the velocity just before it hits? (Choose upward as the positive vertical direction)
Answer:
Explanation:
Given:
V₀ = 43 m/s
H = 108 m
g = 9.8 m/c²
____________
L - ?
Vₓ - ?
Vy - ?
1)
Fall time:
H = g*t² / 2
t = √ ( 2*H / g) = √ (2*108 / 9.8) ≈ 4.7 s
L = V*t = 43*4.7 ≈ 200 m
2)
Vx = V₀ = 43 m/s
Vy = - g*t = - 9.8*4.7 ≈ - 46 m/s
how does the philippines generate 17 percent of its electricity with geothermal energy
Coal is used to produce the majority of the electricity in the Philippines. The country's total electricity production in 2021 was 47.6% fueled by fossil fuels. Another 10.7% of the fuel was natural gas. In that year, fossil fuels accounted for about 76 percent of the nation's electricity output.
What is geothermal energy?Geothermal energy is heat that rises from the earth's interior. Geothermal energy travels to the Earth's surface in the form of water or steam. Depending on its properties, geothermal energy can be utilized to produce clean electricity or be used for heating and cooling.
Due to its location along the Ring of Fire zone of Pacific volcanoes, the Philippines is among the top geothermal energy producers in the world. On March 9, 2018, the nation turned on the 12-megawatt Maibarara Geothermal Power Plant-2 in Santo Tomas, Batangas.
To know more about geothermal energy, visit:
https://brainly.com/question/1061324
#SPJ9
A group of physics students launched a rocket in a field at their school. They recorded the time it took for the rocket to launch into the air and come back to the ground. They calculated their average time for their rocket to land to be 12.74 seconds.
1. How long did the rocket take to reach max height?
2. What is the velocity of the rocket at max height?
3. What is the initial velocity of the rocket?
4. What was the maximum height of the rocket?
The time taken by the rocket to reach maximum height is 6.37 s. The velocity of the rocket at maximum height is 62.43 m/s. The initial velocity of the rocket is 0. The maximum height of the rocket is 198.8 m.
1 ) Total time taken = 12.74 s
Time taken to reach maximum height = Time taken to reach the ground from the maximum height
Time taken to reach maximum height = 12.74 / 2
Time taken to reach maximum height = 6.37 s
2 ) a = g = 9.8 m / s²
v = u + a t
v = 0 + ( 9.8 * 6.37 )
v = 62.43 m / s
3 ) The initial velocity of the rocket is zero
4 ) According to equations of motion,
s = u t + 1 / 2 a t²
s = 0 + ( 1 / 2 * 9.8 * 6.37² )
s = 198.8 m
Therefore,
The time taken by the rocket to reach maximum height is 6.37 sThe velocity of the rocket at maximum height is 62.43 m / sThe initial velocity of the rocket is 0The maximum height of the rocket is 198.8 mTo know more about Equation of motion
https://brainly.com/question/5955789
#SPJ1
The energy diagram shows the changes in energy during a chemical reaction.
Which statement best describes the total energy change of the system?
Potential energy
Reaction progress
• A. The reactants have higher potential energy, and energy is released.
absorbed.
• B. The reactants have higher potential energy, and energy is
absorbed.
C. The products have higher potential energy, and energy is
D. The products have higher potential energy, and energy 1S released.
B. The reactants have higher potential energy, and energy is absorbed is the statement that best describes the total energy change of the system.
What term best explains the energy shifts that occur during chemical reactions?The difference in the amounts of chemical energy that are stored in the products and reactants accounts for the energy change in a chemical reaction. Enthalpy refers to the system’s heat content or stored chemical energy.
What is potential energy?Potential energy can be described as the energy which a body possess because of its position. The potential energy can also be said as stored energy. The energy diagram that shows the changes in energy is called as a chemical reaction.
Potential energy and the Reaction progress are shown in the problem and from this the reactants are seen as the substance which reacts and form one or more than one product.
To know more about Potential Energy, Visit:
https://brainly.com/question/24284560
#SPJ13
Which example BEST illustrates hindsight bias?
Please choose the correct answer from the following choices, and then select the submit answer button.
Answer choices
A: You predicted you would earn 80 percent on your test, but you only earned 70 percent.
B: You meet a person on the street and feel an instant attraction. Later on, you tell a friend about the encounter and state that you just met the person you will marry.
C: You believe that previously infertile couples will become pregnant after adopting a child.
D: You just found out that the homecoming queen and captain of the football team from your high school are splitting up. You think back to the last time you saw them together and have the feeling that you could have predicted their breakup.
Answer:
A
Explanation:
you predicted it in the past and assumed the outcome of your result and they was a difference of 10 percent
The push exerted on one object when it has a collision with another object is called
?
Your answer
The push exerted on one object when it has a collision with another object these forces are also referred to as force pairs, action forces, and reaction forces.
Collision: What is it?A collision, also known as an impact, occurs when two bodies, such as two pool cues, a golf club and a ball, a hammer and a nail, two railroad cars when joined, or a falling object and a floor, suddenly and violently collide. Collisions help physicists understand the characteristics of atomic and subatomic particles.
Collisions happen when two objects come into contact. In most cases, conservation of momentum and conservation of energy are used to solve collision-related problems. Collisions might be of two different types: Momentum is conserved in inelastic collisions, whereas it is also conserved in elastic collisions together with kinetic energy.
To learn more about collision click on the link below:
https://brainly.com/question/25945297
#SPJ9
The diagram represents a ball being kicked by a foot and rising at an angle of 30 degrees from the horizontal. The ball has a velocity of 5.0 meters per second. (Neglect Friction) If the angle between the horizontal and the direction of the 5.0 meters per second decreases from 30 degrees to 20 degrees, what is the magnitude of the horizontal component of the balls initial velocity
The magnitude of the horizontal component of the balls initial velocity if the angle between the horizontal and the direction of the 5.0 meters per second decreases from 30 degrees to 20 degrees is 4.7 m / s
cos θ = Adjacent side / Hypotenuse
θ = 20°
V = 5 m / s
Since the direction of ball makes a right angled triangle with the horizontal,
cos θ = [tex]V_{x}[/tex] / V
[tex]V_{x}[/tex] = cos 20° * 5
[tex]V_{x}[/tex] = 0.94 * 5
[tex]V_{x}[/tex] = 4.7 m / s
The formula used to solve is called as trigonometric ratios formulas. The basic formulae are:
sin θ = Perpendicular/Hypotenuse
cos θ = Base/Hypotenuse
tan θ = Perpendicular/Base
Therefore, the magnitude of the horizontal component of the balls initial velocity is 4.7 m / s
To know more about trigonometric ratios
brainly.com/question/25413148
#SPJ1
A car must cover a distance of 300 km in 3 hours. However, for the first 2
hours it only travels 150 km. At what speed must it travel for the rest of the
distance in order to complete the journey on time?
Answer:
150 km/h
Explanation:
After the first two hours, you have traveled 150km (given) which means that you still have 300km - 150km = 150km left to travel. Since you have already traveled 2 hours, that means you must travel the remaining 150km in 3hours - 2hours = 1hour. Assuming the answer is in km/hour, you will need to travel at a speed of 150km/1h = 150km/h for the remaining of the distance.
what type of focal length was primarily used in citizen kane?
25mn type of focal length was primarily used in citizen kane.
The focal lengths and lenses used by 19 notable directors are analyzed in a new video essay by Wolfcrow, starting with Orson Welles' use of 25mm for Citizen Kane and 18mm for Touch of Evil.
In Orson Welles' Citizen Kane, deep focus was frequently used to provide the audience with insight into Charles Foster Kane's thoughts or to reveal more about his life. With deep focus, the foreground, middle ground, and backdrop are all sharply in focus at once.
learn more about focal length here :
https://brainly.com/question/16188698
#SPJ4
Ashley throws a baseball into the air at 20 m/s.
Determine the time it takes the ball to reach its maximum height.
What is the ball’s maximum height?
How long is the baseball’s total trip back to Ashley’s hand? (Assuming she kept it in the same place.)
Answer:
Take upwards as positive and downwards as negative
Explanation:
the time to reach the maximum height is 2,04s, therefore the time to come back down will be doubled that which is 4,08s
Hope this helps !!
Ashley throws a baseball into the air at 20 m/s, the time needed to reach the maximum height is 2,04s, therefore the time to come back down will be doubled that which is 4,08s.
What are the unit of length ?length measurement can be defined as an act for the identification of the length of the object in some standard or non-standard units.
The most common units of length are U.S. customary units and the metric units which mainly include SI and non-SI units, others are British Imperial units are also still used in some countries.
Other units of length also include kilometres, nanometre, millimetres, centimetres, metres, decimetres where as the Imperial and U.S. customary systems, basic unit of length is the yard.
other units are thou (1⁄1000 of an inch), line (1⁄12 of an inch), inch (25.4 mm), foot (12 inches, 0.3048 m)
For more details height, visit
https://brainly.com/question/27889992
#SPJ2
Co is a compound product of a chemical reaction between __ atom and __ atom.
Effect of the amount of water on bead plant growth
A pot of water is heated using a camping stove. The stove supplies 115,000 J of energy to the 0.54 kg of water. Given that the specific heat.
what is the amount of water on bead plant growth?If a plant's soil has too much water, the roots can rot, and the plant can't get enough oxygen from the soil. If there is not enough water for a plant, the nutrients it needs cannot travel through the plant. A plant cannot grow if it doesn't have healthy roots, so the proper balance of water is key when growing plants. Water level significantly affected seed germination and seedling establishment. The wet soil treatment germination rate (83%) was much higher than the waterlogged (56%) and submerged (44%) treatments. As water emerges or evaporates between the plant's stomata, water is pushed up from the soil through the roots and into the plant. Water conveys with its minerals and nutrients from the soil that are vital for plant growth.
so we can conclude that A pot of water is heated using a camping stove. The stove supplies 115,000 J of energy to the 0.54 kg of water. Given that the specific heat.
Learn more about it water here: https://brainly.com/question/1313076
#SPJ1
A wrecking ball on a 15.4 m longcable is pulled back to an angle of33.5° and released. At what speedis it moving at the bottom of itsswing?(Unit = m/s)Enter
Given data
*The given length of the cable is L = 15.4 m
*The given angle is
[tex]\theta=33.5^0[/tex]The formula for the height is given as
[tex]h=L(1-\cos \theta)[/tex]Substitute the values in the above expression as
[tex]\begin{gathered} h=15.4(1-\cos 33.5^0) \\ =2.57\text{ m} \end{gathered}[/tex]The formula for the velocity of the ball at the bottom of its swing is given as
[tex]v=\sqrt[]{2gh}[/tex][tex]\begin{gathered} v=\sqrt[]{2\times9.8\times2.57} \\ =7.09\text{ m/s} \end{gathered}[/tex]As one proceeds down the column of the halogens, the reactivity tends to a) increase because the valence electrons are less attracted to the nucleus b) increases because there are a greater number of protons in the nucleus c) decrease because there are more valence electrons in the atom itself d) decrease because the nucleus exerts a weaker pull on the valence electrons
As one proceeds down the group of halogens, one would find that the reactivity of the elements decreases. This is because the ionic radii increase down the group. And as the ionic radii increase, the nucleus of halogens exerts a weaker pull on the valance electrons.
Thus the correct answer is option d.
Cody's car accelerates from 0m/s to 45 m/s northward in 15 seconds. What is
the acceleration of the car?
According to the given statement the acceleration of the car is 3ms².
What does "acceleration" mean ?Depending on whether an object is moving much faster, slower, or in a different direction, its speed may change. Examples of acceleration include a falling apple, the moon orbiting the earth and a car which has stopped at a stop sign.
Which four forms of acceleration are there?Uniform acceleration, non-uniform acceleration, and average acceleration are the three different forms of accelerated motions.
Briefing:Let acceleration be 'a'
v = u + at
a = v - u/t
a = 45 - 0 /15
a = 45/15
a = 3 ms²
So, acceleration will be 3 m/s² .
To know more about Acceleration visit:
https://brainly.com/question/12550364
#SPJ9
you have not eaten for four days. when you finally have a candy bar, which is most likely to occur? your ____ will be reduced, but your____ will not.
For a person who has not eaten for four days and then finally has a candy bar, your food drive will be reduced, but your food need will no.t
What is food?Food refers to any substance that is taken into the body and which contains nutrients that provide energy for the body and also provide the body with materials required for the growth and repair of body tissues.
There are seven classes of food that the body needs and they include:
carbohydratesfats and oilproteinsvitaminsmineralsfiberwaterFood drive refers to the urge to eat food and may be easily satiated.
Food need on the hand has to do with all the food that the body needs for healthy growth and is not easily met.
Learn more about food at: https://brainly.com/question/25884013
#SPJ1
What is TRUE about the rifling of a gun?
O
It produces grooves and lands.
It is another name for the inside of a gun barrel.
O
It only appears in .38 caliber firearms.
O
It can only be seen with a microscope.
Answer:
It produces grooves and lands.