When the valve is opened, oxygen and hydrogen molecules will mix because of random movement of their molecules.
What is diffusion?
Diffusion involves the movement of gas molecules from one region where they are in higher concentration to another region where they are in lower concentration.
When the valve is opened, oxygen and hydrogen molecules will mix because of random movement of their molecules.
Learn more about diffusion: https://brainly.com/question/576417
Answer:
Oxygen and hydrogen molecules will mix because of random movement of their molecules.
Explanation:
Which chemical reaction occurs between steps 1 and 5?
What is the correct formula
for tin(II) chloride dihydrate?
the answer is A. SnCl2 . 2H2O
Which statement does not identify a characteristic of antibodies?
A They are produced by the body in response to the presence
of foreign substances.
B They may be produced in response to an antigen.
© They are nonspecific, acting against any foreign substance in
the body.
D They may be produced by white blood cells.
Answer:
they are produced by the body in response to the presence of foreign substance
A teacher places a cup of coffee onto an electronic balance at the front of the science laboratory. The teacher then adds three large teaspoons of sugar to the coffee. The volume of the coffee does not appear to increase. What happens to the mass displayed on the front of the balance?
Answer:
it will be same as before
Answer:
The mass on the balance stays the same
Explanation:
.
Which of the following liquids has the highest viscosity
A water
B oil
C milk
D honey
Answer:
honey has the highest viscosity
According to the given option, honey is the liquid that has the highest viscosity. So, the correct option is D.
What do you mean by Viscosity?Viscosity may be defined as the effects of a liquid by probity of which an internal resistance comes into play when the liquid is in movement and resists the comparable motion between its distinct layers.
Among all the given options, honey possesses more strong intermolecular attractive forces that result in the high compaction of particles in the honey.
After honey, Oil is more viscous followed by milk, and then water.
Therefore, the correct option for this question is D.
To learn more about Viscosity, refer to the link:
https://brainly.com/question/2684299
#SPJ2
Explain why some substances travel further than others.
Larger molecules take longer to move up the chromatography paper or TLC plate, whereas smaller molecules are more mobile. Likewise, the polarity of the molecules can affect how far the spots travel, depending on the type of solvent used.
[tex]\large\sf\red{♡♡}[/tex]
Definition for starch in science ?
Answer:
Starch is a polysaccharide comprising glucose monomers joined in α 1,4 linkages. orStarch is a long-chain polymer of glucose molecules joined together. orA starch is a complex polysaccharide made up of a large number of glucose units joined together by glycosidic bonds.Explanation:
starch, a white, granular, organic chemical that is produced by all green plants. Starch is a soft, white, tasteless powder that is insoluble in cold water, alcohol, or other solvents.
Starch is amongst the most abundant plant products and is a mixture of two polymers, amylose and amylopectin. During food processing starch is transformed by hydrothermal treatments. ... The structure of starch is also influenced by specific and non-specific interactions with other food constituents and ingredients.
What does the electron configuration for the noble gases tell us about the elements in the
group
Answer:That all noble gases will have 8 valence electrons which makes a atom stable
Explanation:
Draw a table with two columns labelled physical change and chemical change .Write the following changes in the correct column .
water boiling
a car rusting
petrol burning
beer fermenting
ice cream melting
wind blowing
milk turning sour
seawater evaporating
sugar dissolving in tea
food being digested
bleach cleaning a dirty cloth
Answer:
Explanation:
P = Physical Change
C = Chemical Change
water boiling P
a car rusting C
petrol burning C
beer fermenting C
ice cream melting P
wind blowing P
milk turning sour C
seawater evaporating P
sugar dissolving in tea P
food being digested C
bleach cleaning a dirty cloth
Which of these codes is best for creating websites?
The most used codes for the creation of websites are CSS and HTML.
What is a code?A code can be defined as the basic unit that composes a website. This implies that by using a code you can create a website from scratch and by the end of the process you should have a functional and complete website.
What codes are used?In website creation, the most common codes are CSS and HTML.
HTML: This is the most common code used and also one of the easiest to understand and use.
CSS: This code is not as popular as HTML but it is still a very popular code used by many people creating websites.
Note: This question is incomplete because the options are not given; due to this, I answered it based on general knowledge.
Learn more about websites in: https://brainly.com/question/1631583?referrer=searchResults
how would you expect the solubility of barium sulfate in pure water to compare to its solubility in 0.10 m nacl
Answer:
barium sulfate is insoluble (unable to dissolve) in water.
the general equation for the reaction between solid barium sulfate and nacl solution is this:
BaSO4 (s) + 2NaCl (aq) --> BaCl (aq) + Na2SO4 (aq)
to sum this up, to compare the solubility,
1. barium sulfate cant dissolve in pure water.
2. barium sulfate dissolves in nacl solution to give aqueous (aq) barium chloride (bacl) and aqueous sodium sulfate (na2so4), as shown in the equation above.
good luck!
The solubility of barium sulfate in pure water to zero as compare to the solubility in NaCl solution.
What is solubility?
Solubility is a property of any substance that defines how easily can be any substance will get dissolved or show dissolution.
Barium sulphate is insoluble in water beacuse it has higher lattice energy as well as higher size of cations & anions as compare to water, due to which water is not able to attract these ions towards itself affectively.Barium sulphate is soluble in the NaCl solution as this solution having ions which have more power to attract the ions of barium sulphate and show dissolution. Chemical reaction for this will be represented as:BaSO₄ (s) + 2NaCl (aq) → BaCl (aq) + Na₂SO₄ (aq)
Hence, barium sulphate is insoluble in water.
To know more about solubility, visit the below link:
https://brainly.com/question/16903071
Part A
What question is being asked through this scientific investigation?
(I didn’t know what subject so sorry, also only answer if u have an answer.)
Answer:
How will the ingredients effect the fermentation of each bottle? What will happen to the bottles and balloons when fermentation occurs?
Explanation:
Write the shape of s and p-orbials.
s-orbitals are spherical, while p-orbitals are similar to a 3-D infinity symbol. I have attached an image of the comparison.
BRAINLIEST TO FIRST RIGHT ANSWER
Use the key above to interpret the following incomplete chemical reaction.
Select the statements at apply in order to complete the model. (Choose 3)
A) The number of atoms in the products must be equal to the reactants.
B) One diatomic oxygen should be removed from the reactant side.
C) One unbonded carbon atom should be added to the product side of the equation
D) One carbon atom and two oxygen atoms are needed to balance the equation.
E) One carbon dioxide molecule should be added to the product side of the equation.
Answer:
Carbon dioxide molecule
Answer:a , d ,e
Explanation:
jusy took quiz
which acids are found In lemon and milk
Answer:
lemon- citric acid
milk- lactic acid
Answer:
lemon=citric and malic acids.
milk=Lactic Acid
Explanation:
hydrofluoric acid
What’s the formula
Hydrofluoric acid/Formula
______________________
HF
______________________
o0o0o0o0o0o0o0o0o0o0o0
Which tool would give the most precise measurement of 15 milliliters of water
A graduated cylinder
_________________
o0o0o0o0o0o0o0o0o0
significance of symbol Mg
Answer:
Magnesium Magnesium is used in products that benefit from being lightweight, such as car seats, luggage, laptops, cameras and power tools. It is also added to molten iron and steel to remove sulfur. As magnesium ignites easily in air and burns with a bright light, it's used in flares, fireworks and sparklers.I hope this helps you !!magnesium carbonate and sulphuric acid react to form
Answer:
magnesium sulfate + water + carbon dioxide
Explanation:
The Statue of Liberty is composed of copper. The smallest particle of any amount of copper is A) an atom. B) an element. C) a compound. Eliminate D) a molecule.
an atom because its the smallest thing in the entire world and in all orgnaisms
cellus
A student measures the acidity of a solution and
concludes that it has a pH of 2.70. However, the
seller claims that its pH is 3.20. What is the
percent error in the student's measurement?
Answer:
15.63%
Explanation:
The formula of error percentage is:
([experimental value-real value]/real value)100%
You divide the subtraction of the absolute value of experimental value (the one you got during a experiment) and the one that's "proven" to be right by again, the proven value. You got a decimal and all you have to do is multiply it by 100%
Answer:
on acellus the answer is 16%
I hate acellus
Explanation:
Why do trees not yet colonize the island?
what is the mass of 3.0 x x times 10^23 atoms of neon?
Answer:
10.09 grams
Explanation:
First you need to know the number of moles you are dealing with.
If you know that each mole has 6.022x10²³ of something (in this case of atoms), you can divide 3x10²³ atoms of neons by 6.022x10²³ to obtain the number of moles.
You have 0.5 moles of Neon, so then by the periodic table, you see that the molar mass of neon is 20.18g/mol, so by each mole you have 20.18 grams of neon. Multiply 20.18 grams by 0.5 moles and you got 10.09 grams of Neon
please please answer this question!!!!!!
cell membrane - phospholipd bilayer
pigmented - chloroplasts
chloroplasts - oval shaped with two membranes
rectangular or cubed - plant cell
nucleus - control centre
hope that's what you are looking for
people tint their car windows to stop what
Answer:
Reflection
Explanation:
Answer:
b
Explanation:
the two stages that take place during distillation are. a.evaporation is folloeed by condensation. b.condensation followed by evaporation
Answer:
evapiration followed by condensation
The ribosomes of plant cells are sites for the synthesis of
(a) ATP (b) nucleic acids (c) sugars (d) proteins
Answer:
Proteins
Explanation:
Their Function Formation Encoded in mRNA into polypeptide chains of amino acids that produces protein
The ribosome of plant cells are sites for the synthesis of proteins. The correct option is (d).
What are ribosomes?Ribosomes are organelles that take part in the synthesis of proteins. The prokaryotic cell's ribosomes are smaller than the eukaryotic cell's ribosomes.
Currently, ribosomal RNA is a component of the cell's ribosome or protein-building machinery. The process of making proteins, or translation, is carried out by ribosomes.
The ribosome, which translates the genetic code generated in mRNA into an amino acid sequence, is universally responsible for protein synthesis. The two ribosomal subunits, small and big, come together to form the full ribosome, which is used to produce proteins.
Therefore, the correct option is (d) proteins.
To learn more about ribosomes, refer to the link:
https://brainly.com/question/1604076
#SPJ2
If the energy of the H–H bond is 452 kJ/mol. The energy of the O=O bond is 598 kJ/mol. The energy of the O–H bond is 367 kJ/mol, which bond would be the strongest? Which bond would be the weakest?
Taking into account the bond energy, the O=O bond is the strongest and the O–H bond is the weakest.
The bond energy is the average total energy that would be released by the formation of a mole of chemical bonds, from their constituent fragments (all in the gaseous state).
In other words, the normal or standard bond enthalpy is defined as the change in enthalpy or heat released, under standard conditions of 1 atmosphere and 25ºC, that accompanies the reaction of formation of one mole of bonds from the isolated atoms in gaseous state.
The higher the bond energy, the stronger and more stable the bond will be.
So, taking into account all the previous, the O=O bond is the strongest and the O–H bond is the weakest.
Learn more about bond energy:
https://brainly.com/question/14769257?referrer=searchResultshttps://brainly.com/question/18724136?referrer=searchResultshttps://brainly.com/question/14175443?referrer=searchResultshttps://brainly.com/question/13765299?referrer=searchResultsThis boy said he was finna destroy me and winked what does that mean
Answer:
pipe
Explanation:
You receiving
Pls Help Me (20 Points)
In one to two sentences, describe an experiment that would show that intramolecular forces (attractions between atoms within molecules) are stronger than intermolecular forces (attractions between molecules).
Answer:
If the molecules have similar molar masses and similar types of intermolecular forces, look for the one that is the most polar or that has the most electronegative atoms or the most hydrogen bonding groups. That one will have the strongest IMF's overall.
Explanation:
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
Intramolecular forces are the forces of attraction that hold atoms together within a molecule. Intramolecular forces require a high amount of energy to splits atoms or molecules in a chemical bonding.
Intermolecular forces are weaker forces of attraction that occur between molecules. They require lesser energy to splits molecules compared to intramolecular forces.
An experiment that show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
In the process, the energy required to change the state from ice to steam water is more than intermolecular forces.
Thus, we can conclude that this experiment shows that the intramolecular forces are stronger than the intermolecular forces.
Learn more:
https://brainly.com/question/14220340